| #include <sys/socket.h> |
| |
| #include <ctype.h> |
| #include <setjmp.h> |
| |
| #include <lauxlib.h> |
| #include <lua.h> |
| #include <lualib.h> |
| |
| #if !defined(LUA_VERSION_NUM) || LUA_VERSION_NUM < 503 |
| #error "Requires Lua 5.3 or later." |
| #endif |
| |
| #include <ebpttree.h> |
| |
| #include <common/cfgparse.h> |
| |
| #include <types/connection.h> |
| #include <types/hlua.h> |
| #include <types/proxy.h> |
| |
| #include <proto/arg.h> |
| #include <proto/applet.h> |
| #include <proto/channel.h> |
| #include <proto/hdr_idx.h> |
| #include <proto/hlua.h> |
| #include <proto/map.h> |
| #include <proto/obj_type.h> |
| #include <proto/pattern.h> |
| #include <proto/payload.h> |
| #include <proto/proto_http.h> |
| #include <proto/proto_tcp.h> |
| #include <proto/raw_sock.h> |
| #include <proto/sample.h> |
| #include <proto/server.h> |
| #include <proto/session.h> |
| #include <proto/stream.h> |
| #include <proto/ssl_sock.h> |
| #include <proto/stream_interface.h> |
| #include <proto/task.h> |
| #include <proto/vars.h> |
| |
| /* Lua uses longjmp to perform yield or throwing errors. This |
| * macro is used only for identifying the function that can |
| * not return because a longjmp is executed. |
| * __LJMP marks a prototype of hlua file that can use longjmp. |
| * WILL_LJMP() marks an lua function that will use longjmp. |
| * MAY_LJMP() marks an lua function that may use longjmp. |
| */ |
| #define __LJMP |
| #define WILL_LJMP(func) func |
| #define MAY_LJMP(func) func |
| |
| /* This couple of function executes securely some Lua calls outside of |
| * the lua runtime environment. Each Lua call can return a longjmp |
| * if it encounter a memory error. |
| * |
| * Lua documentation extract: |
| * |
| * If an error happens outside any protected environment, Lua calls |
| * a panic function (see lua_atpanic) and then calls abort, thus |
| * exiting the host application. Your panic function can avoid this |
| * exit by never returning (e.g., doing a long jump to your own |
| * recovery point outside Lua). |
| * |
| * The panic function runs as if it were a message handler (see |
| * §2.3); in particular, the error message is at the top of the |
| * stack. However, there is no guarantee about stack space. To push |
| * anything on the stack, the panic function must first check the |
| * available space (see §4.2). |
| * |
| * We must check all the Lua entry point. This includes: |
| * - The include/proto/hlua.h exported functions |
| * - the task wrapper function |
| * - The action wrapper function |
| * - The converters wrapper function |
| * - The sample-fetch wrapper functions |
| * |
| * It is tolerated that the initilisation function returns an abort. |
| * Before each Lua abort, an error message is writed on stderr. |
| * |
| * The macro SET_SAFE_LJMP initialise the longjmp. The Macro |
| * RESET_SAFE_LJMP reset the longjmp. These function must be macro |
| * because they must be exists in the program stack when the longjmp |
| * is called. |
| */ |
| jmp_buf safe_ljmp_env; |
| static int hlua_panic_safe(lua_State *L) { return 0; } |
| static int hlua_panic_ljmp(lua_State *L) { longjmp(safe_ljmp_env, 1); } |
| |
| #define SET_SAFE_LJMP(__L) \ |
| ({ \ |
| int ret; \ |
| if (setjmp(safe_ljmp_env) != 0) { \ |
| lua_atpanic(__L, hlua_panic_safe); \ |
| ret = 0; \ |
| } else { \ |
| lua_atpanic(__L, hlua_panic_ljmp); \ |
| ret = 1; \ |
| } \ |
| ret; \ |
| }) |
| |
| /* If we are the last function catching Lua errors, we |
| * must reset the panic function. |
| */ |
| #define RESET_SAFE_LJMP(__L) \ |
| do { \ |
| lua_atpanic(__L, hlua_panic_safe); \ |
| } while(0) |
| |
| /* Applet status flags */ |
| #define APPLET_DONE 0x01 /* applet processing is done. */ |
| #define APPLET_100C 0x02 /* 100 continue expected. */ |
| #define APPLET_HDR_SENT 0x04 /* Response header sent. */ |
| #define APPLET_CHUNKED 0x08 /* Use transfer encoding chunked. */ |
| #define APPLET_LAST_CHK 0x10 /* Last chunk sent. */ |
| #define APPLET_HTTP11 0x20 /* Last chunk sent. */ |
| |
| #define HTTP_100C "HTTP/1.1 100 Continue\r\n\r\n" |
| |
| /* The main Lua execution context. */ |
| struct hlua gL; |
| |
| /* This is the memory pool containing all the signal structs. These |
| * struct are used to store each requiered signal between two tasks. |
| */ |
| struct pool_head *pool2_hlua_com; |
| |
| /* Used for Socket connection. */ |
| static struct proxy socket_proxy; |
| static struct server socket_tcp; |
| #ifdef USE_OPENSSL |
| static struct server socket_ssl; |
| #endif |
| |
| /* List head of the function called at the initialisation time. */ |
| struct list hlua_init_functions = LIST_HEAD_INIT(hlua_init_functions); |
| |
| /* The following variables contains the reference of the different |
| * Lua classes. These references are useful for identify metadata |
| * associated with an object. |
| */ |
| static int class_txn_ref; |
| static int class_socket_ref; |
| static int class_channel_ref; |
| static int class_fetches_ref; |
| static int class_converters_ref; |
| static int class_http_ref; |
| static int class_map_ref; |
| static int class_applet_tcp_ref; |
| static int class_applet_http_ref; |
| |
| /* Global Lua execution timeout. By default Lua, execution linked |
| * with stream (actions, sample-fetches and converters) have a |
| * short timeout. Lua linked with tasks doesn't have a timeout |
| * because a task may remain alive during all the haproxy execution. |
| */ |
| static unsigned int hlua_timeout_session = 4000; /* session timeout. */ |
| static unsigned int hlua_timeout_task = TICK_ETERNITY; /* task timeout. */ |
| static unsigned int hlua_timeout_applet = 4000; /* applet timeout. */ |
| |
| /* Interrupts the Lua processing each "hlua_nb_instruction" instructions. |
| * it is used for preventing infinite loops. |
| * |
| * I test the scheer with an infinite loop containing one incrementation |
| * and one test. I run this loop between 10 seconds, I raise a ceil of |
| * 710M loops from one interrupt each 9000 instructions, so I fix the value |
| * to one interrupt each 10 000 instructions. |
| * |
| * configured | Number of |
| * instructions | loops executed |
| * between two | in milions |
| * forced yields | |
| * ---------------+--------------- |
| * 10 | 160 |
| * 500 | 670 |
| * 1000 | 680 |
| * 5000 | 700 |
| * 7000 | 700 |
| * 8000 | 700 |
| * 9000 | 710 <- ceil |
| * 10000 | 710 |
| * 100000 | 710 |
| * 1000000 | 710 |
| * |
| */ |
| static unsigned int hlua_nb_instruction = 10000; |
| |
| /* Descriptor for the memory allocation state. If limit is not null, it will |
| * be enforced on any memory allocation. |
| */ |
| struct hlua_mem_allocator { |
| size_t allocated; |
| size_t limit; |
| }; |
| |
| static struct hlua_mem_allocator hlua_global_allocator; |
| |
| static const char error_500[] = |
| "HTTP/1.0 500 Server Error\r\n" |
| "Cache-Control: no-cache\r\n" |
| "Connection: close\r\n" |
| "Content-Type: text/html\r\n" |
| "\r\n" |
| "<html><body><h1>500 Server Error</h1>\nAn internal server error occured.\n</body></html>\n"; |
| |
| /* These functions converts types between HAProxy internal args or |
| * sample and LUA types. Another function permits to check if the |
| * LUA stack contains arguments according with an required ARG_T |
| * format. |
| */ |
| static int hlua_arg2lua(lua_State *L, const struct arg *arg); |
| static int hlua_lua2arg(lua_State *L, int ud, struct arg *arg); |
| __LJMP static int hlua_lua2arg_check(lua_State *L, int first, struct arg *argp, |
| unsigned int mask, struct proxy *p); |
| static int hlua_smp2lua(lua_State *L, struct sample *smp); |
| static int hlua_smp2lua_str(lua_State *L, struct sample *smp); |
| static int hlua_lua2smp(lua_State *L, int ud, struct sample *smp); |
| |
| __LJMP static int hlua_http_get_headers(lua_State *L, struct hlua_txn *htxn, struct http_msg *msg); |
| |
| #define SEND_ERR(__be, __fmt, __args...) \ |
| do { \ |
| send_log(__be, LOG_ERR, __fmt, ## __args); \ |
| if (!(global.mode & MODE_QUIET) || (global.mode & MODE_VERBOSE)) \ |
| Alert(__fmt, ## __args); \ |
| } while (0) |
| |
| /* Used to check an Lua function type in the stack. It creates and |
| * returns a reference of the function. This function throws an |
| * error if the rgument is not a "function". |
| */ |
| __LJMP unsigned int hlua_checkfunction(lua_State *L, int argno) |
| { |
| if (!lua_isfunction(L, argno)) { |
| const char *msg = lua_pushfstring(L, "function expected, got %s", luaL_typename(L, -1)); |
| WILL_LJMP(luaL_argerror(L, argno, msg)); |
| } |
| lua_pushvalue(L, argno); |
| return luaL_ref(L, LUA_REGISTRYINDEX); |
| } |
| |
| /* Return the string that is of the top of the stack. */ |
| const char *hlua_get_top_error_string(lua_State *L) |
| { |
| if (lua_gettop(L) < 1) |
| return "unknown error"; |
| if (lua_type(L, -1) != LUA_TSTRING) |
| return "unknown error"; |
| return lua_tostring(L, -1); |
| } |
| |
| /* The three following functions are useful for adding entries |
| * in a table. These functions takes a string and respectively an |
| * integer, a string or a function and add it to the table in the |
| * top of the stack. |
| * |
| * These functions throws an error if no more stack size is |
| * available. |
| */ |
| __LJMP static inline void hlua_class_const_int(lua_State *L, const char *name, |
| int value) |
| { |
| if (!lua_checkstack(L, 2)) |
| WILL_LJMP(luaL_error(L, "full stack")); |
| lua_pushstring(L, name); |
| lua_pushinteger(L, value); |
| lua_rawset(L, -3); |
| } |
| __LJMP static inline void hlua_class_const_str(lua_State *L, const char *name, |
| const char *value) |
| { |
| if (!lua_checkstack(L, 2)) |
| WILL_LJMP(luaL_error(L, "full stack")); |
| lua_pushstring(L, name); |
| lua_pushstring(L, value); |
| lua_rawset(L, -3); |
| } |
| __LJMP static inline void hlua_class_function(lua_State *L, const char *name, |
| int (*function)(lua_State *L)) |
| { |
| if (!lua_checkstack(L, 2)) |
| WILL_LJMP(luaL_error(L, "full stack")); |
| lua_pushstring(L, name); |
| lua_pushcclosure(L, function, 0); |
| lua_rawset(L, -3); |
| } |
| |
| __LJMP static int hlua_dump_object(struct lua_State *L) |
| { |
| const char *name = (const char *)lua_tostring(L, lua_upvalueindex(1)); |
| lua_pushfstring(L, "HAProxy class %s", name); |
| return 1; |
| } |
| |
| /* This function check the number of arguments available in the |
| * stack. If the number of arguments available is not the same |
| * then <nb> an error is throwed. |
| */ |
| __LJMP static inline void check_args(lua_State *L, int nb, char *fcn) |
| { |
| if (lua_gettop(L) == nb) |
| return; |
| WILL_LJMP(luaL_error(L, "'%s' needs %d arguments", fcn, nb)); |
| } |
| |
| /* Return true if the data in stack[<ud>] is an object of |
| * type <class_ref>. |
| */ |
| static int hlua_metaistype(lua_State *L, int ud, int class_ref) |
| { |
| if (!lua_getmetatable(L, ud)) |
| return 0; |
| |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_ref); |
| if (!lua_rawequal(L, -1, -2)) { |
| lua_pop(L, 2); |
| return 0; |
| } |
| |
| lua_pop(L, 2); |
| return 1; |
| } |
| |
| /* Return an object of the expected type, or throws an error. */ |
| __LJMP static void *hlua_checkudata(lua_State *L, int ud, int class_ref) |
| { |
| void *p; |
| |
| /* Check if the stack entry is an array. */ |
| if (!lua_istable(L, ud)) |
| WILL_LJMP(luaL_argerror(L, ud, NULL)); |
| /* Check if the metadata have the expected type. */ |
| if (!hlua_metaistype(L, ud, class_ref)) |
| WILL_LJMP(luaL_argerror(L, ud, NULL)); |
| /* Push on the stack at the entry [0] of the table. */ |
| lua_rawgeti(L, ud, 0); |
| /* Check if this entry is userdata. */ |
| p = lua_touserdata(L, -1); |
| if (!p) |
| WILL_LJMP(luaL_argerror(L, ud, NULL)); |
| /* Remove the entry returned by lua_rawgeti(). */ |
| lua_pop(L, 1); |
| /* Return the associated struct. */ |
| return p; |
| } |
| |
| /* This fucntion push an error string prefixed by the file name |
| * and the line number where the error is encountered. |
| */ |
| static int hlua_pusherror(lua_State *L, const char *fmt, ...) |
| { |
| va_list argp; |
| va_start(argp, fmt); |
| luaL_where(L, 1); |
| lua_pushvfstring(L, fmt, argp); |
| va_end(argp); |
| lua_concat(L, 2); |
| return 1; |
| } |
| |
| /* This function register a new signal. "lua" is the current lua |
| * execution context. It contains a pointer to the associated task. |
| * "link" is a list head attached to an other task that must be wake |
| * the lua task if an event occurs. This is useful with external |
| * events like TCP I/O or sleep functions. This funcion allocate |
| * memory for the signal. |
| */ |
| static int hlua_com_new(struct hlua *lua, struct list *link) |
| { |
| struct hlua_com *com = pool_alloc2(pool2_hlua_com); |
| if (!com) |
| return 0; |
| LIST_ADDQ(&lua->com, &com->purge_me); |
| LIST_ADDQ(link, &com->wake_me); |
| com->task = lua->task; |
| return 1; |
| } |
| |
| /* This function purge all the pending signals when the LUA execution |
| * is finished. This prevent than a coprocess try to wake a deleted |
| * task. This function remove the memory associated to the signal. |
| */ |
| static void hlua_com_purge(struct hlua *lua) |
| { |
| struct hlua_com *com, *back; |
| |
| /* Delete all pending communication signals. */ |
| list_for_each_entry_safe(com, back, &lua->com, purge_me) { |
| LIST_DEL(&com->purge_me); |
| LIST_DEL(&com->wake_me); |
| pool_free2(pool2_hlua_com, com); |
| } |
| } |
| |
| /* This function sends signals. It wakes all the tasks attached |
| * to a list head, and remove the signal, and free the used |
| * memory. |
| */ |
| static void hlua_com_wake(struct list *wake) |
| { |
| struct hlua_com *com, *back; |
| |
| /* Wake task and delete all pending communication signals. */ |
| list_for_each_entry_safe(com, back, wake, wake_me) { |
| LIST_DEL(&com->purge_me); |
| LIST_DEL(&com->wake_me); |
| task_wakeup(com->task, TASK_WOKEN_MSG); |
| pool_free2(pool2_hlua_com, com); |
| } |
| } |
| |
| /* This functions is used with sample fetch and converters. It |
| * converts the HAProxy configuration argument in a lua stack |
| * values. |
| * |
| * It takes an array of "arg", and each entry of the array is |
| * converted and pushed in the LUA stack. |
| */ |
| static int hlua_arg2lua(lua_State *L, const struct arg *arg) |
| { |
| switch (arg->type) { |
| case ARGT_SINT: |
| case ARGT_TIME: |
| case ARGT_SIZE: |
| lua_pushinteger(L, arg->data.sint); |
| break; |
| |
| case ARGT_STR: |
| lua_pushlstring(L, arg->data.str.str, arg->data.str.len); |
| break; |
| |
| case ARGT_IPV4: |
| case ARGT_IPV6: |
| case ARGT_MSK4: |
| case ARGT_MSK6: |
| case ARGT_FE: |
| case ARGT_BE: |
| case ARGT_TAB: |
| case ARGT_SRV: |
| case ARGT_USR: |
| case ARGT_MAP: |
| default: |
| lua_pushnil(L); |
| break; |
| } |
| return 1; |
| } |
| |
| /* This function take one entrie in an LUA stack at the index "ud", |
| * and try to convert it in an HAProxy argument entry. This is useful |
| * with sample fetch wrappers. The input arguments are gived to the |
| * lua wrapper and converted as arg list by thi function. |
| */ |
| static int hlua_lua2arg(lua_State *L, int ud, struct arg *arg) |
| { |
| switch (lua_type(L, ud)) { |
| |
| case LUA_TNUMBER: |
| case LUA_TBOOLEAN: |
| arg->type = ARGT_SINT; |
| arg->data.sint = lua_tointeger(L, ud); |
| break; |
| |
| case LUA_TSTRING: |
| arg->type = ARGT_STR; |
| arg->data.str.str = (char *)lua_tolstring(L, ud, (size_t *)&arg->data.str.len); |
| break; |
| |
| case LUA_TUSERDATA: |
| case LUA_TNIL: |
| case LUA_TTABLE: |
| case LUA_TFUNCTION: |
| case LUA_TTHREAD: |
| case LUA_TLIGHTUSERDATA: |
| arg->type = ARGT_SINT; |
| arg->data.sint = 0; |
| break; |
| } |
| return 1; |
| } |
| |
| /* the following functions are used to convert a struct sample |
| * in Lua type. This useful to convert the return of the |
| * fetchs or converters. |
| */ |
| static int hlua_smp2lua(lua_State *L, struct sample *smp) |
| { |
| switch (smp->data.type) { |
| case SMP_T_SINT: |
| case SMP_T_BOOL: |
| lua_pushinteger(L, smp->data.u.sint); |
| break; |
| |
| case SMP_T_BIN: |
| case SMP_T_STR: |
| lua_pushlstring(L, smp->data.u.str.str, smp->data.u.str.len); |
| break; |
| |
| case SMP_T_METH: |
| switch (smp->data.u.meth.meth) { |
| case HTTP_METH_OPTIONS: lua_pushstring(L, "OPTIONS"); break; |
| case HTTP_METH_GET: lua_pushstring(L, "GET"); break; |
| case HTTP_METH_HEAD: lua_pushstring(L, "HEAD"); break; |
| case HTTP_METH_POST: lua_pushstring(L, "POST"); break; |
| case HTTP_METH_PUT: lua_pushstring(L, "PUT"); break; |
| case HTTP_METH_DELETE: lua_pushstring(L, "DELETE"); break; |
| case HTTP_METH_TRACE: lua_pushstring(L, "TRACE"); break; |
| case HTTP_METH_CONNECT: lua_pushstring(L, "CONNECT"); break; |
| case HTTP_METH_OTHER: |
| lua_pushlstring(L, smp->data.u.meth.str.str, smp->data.u.meth.str.len); |
| break; |
| default: |
| lua_pushnil(L); |
| break; |
| } |
| break; |
| |
| case SMP_T_IPV4: |
| case SMP_T_IPV6: |
| case SMP_T_ADDR: /* This type is never used to qualify a sample. */ |
| if (sample_casts[smp->data.type][SMP_T_STR] && |
| sample_casts[smp->data.type][SMP_T_STR](smp)) |
| lua_pushlstring(L, smp->data.u.str.str, smp->data.u.str.len); |
| else |
| lua_pushnil(L); |
| break; |
| default: |
| lua_pushnil(L); |
| break; |
| } |
| return 1; |
| } |
| |
| /* the following functions are used to convert a struct sample |
| * in Lua strings. This is useful to convert the return of the |
| * fetchs or converters. |
| */ |
| static int hlua_smp2lua_str(lua_State *L, struct sample *smp) |
| { |
| switch (smp->data.type) { |
| |
| case SMP_T_BIN: |
| case SMP_T_STR: |
| lua_pushlstring(L, smp->data.u.str.str, smp->data.u.str.len); |
| break; |
| |
| case SMP_T_METH: |
| switch (smp->data.u.meth.meth) { |
| case HTTP_METH_OPTIONS: lua_pushstring(L, "OPTIONS"); break; |
| case HTTP_METH_GET: lua_pushstring(L, "GET"); break; |
| case HTTP_METH_HEAD: lua_pushstring(L, "HEAD"); break; |
| case HTTP_METH_POST: lua_pushstring(L, "POST"); break; |
| case HTTP_METH_PUT: lua_pushstring(L, "PUT"); break; |
| case HTTP_METH_DELETE: lua_pushstring(L, "DELETE"); break; |
| case HTTP_METH_TRACE: lua_pushstring(L, "TRACE"); break; |
| case HTTP_METH_CONNECT: lua_pushstring(L, "CONNECT"); break; |
| case HTTP_METH_OTHER: |
| lua_pushlstring(L, smp->data.u.meth.str.str, smp->data.u.meth.str.len); |
| break; |
| default: |
| lua_pushstring(L, ""); |
| break; |
| } |
| break; |
| |
| case SMP_T_SINT: |
| case SMP_T_BOOL: |
| case SMP_T_IPV4: |
| case SMP_T_IPV6: |
| case SMP_T_ADDR: /* This type is never used to qualify a sample. */ |
| if (sample_casts[smp->data.type][SMP_T_STR] && |
| sample_casts[smp->data.type][SMP_T_STR](smp)) |
| lua_pushlstring(L, smp->data.u.str.str, smp->data.u.str.len); |
| else |
| lua_pushstring(L, ""); |
| break; |
| default: |
| lua_pushstring(L, ""); |
| break; |
| } |
| return 1; |
| } |
| |
| /* the following functions are used to convert an Lua type in a |
| * struct sample. This is useful to provide data from a converter |
| * to the LUA code. |
| */ |
| static int hlua_lua2smp(lua_State *L, int ud, struct sample *smp) |
| { |
| switch (lua_type(L, ud)) { |
| |
| case LUA_TNUMBER: |
| smp->data.type = SMP_T_SINT; |
| smp->data.u.sint = lua_tointeger(L, ud); |
| break; |
| |
| |
| case LUA_TBOOLEAN: |
| smp->data.type = SMP_T_BOOL; |
| smp->data.u.sint = lua_toboolean(L, ud); |
| break; |
| |
| case LUA_TSTRING: |
| smp->data.type = SMP_T_STR; |
| smp->flags |= SMP_F_CONST; |
| smp->data.u.str.str = (char *)lua_tolstring(L, ud, (size_t *)&smp->data.u.str.len); |
| break; |
| |
| case LUA_TUSERDATA: |
| case LUA_TNIL: |
| case LUA_TTABLE: |
| case LUA_TFUNCTION: |
| case LUA_TTHREAD: |
| case LUA_TLIGHTUSERDATA: |
| case LUA_TNONE: |
| default: |
| smp->data.type = SMP_T_BOOL; |
| smp->data.u.sint = 0; |
| break; |
| } |
| return 1; |
| } |
| |
| /* This function check the "argp" builded by another conversion function |
| * is in accord with the expected argp defined by the "mask". The fucntion |
| * returns true or false. It can be adjust the types if there compatibles. |
| * |
| * This function assumes thant the argp argument contains ARGM_NBARGS + 1 |
| * entries. |
| */ |
| __LJMP int hlua_lua2arg_check(lua_State *L, int first, struct arg *argp, |
| unsigned int mask, struct proxy *p) |
| { |
| int min_arg; |
| int idx; |
| struct proxy *px; |
| char *sname, *pname; |
| |
| idx = 0; |
| min_arg = ARGM(mask); |
| mask >>= ARGM_BITS; |
| |
| while (1) { |
| |
| /* Check oversize. */ |
| if (idx >= ARGM_NBARGS && argp[idx].type != ARGT_STOP) { |
| WILL_LJMP(luaL_argerror(L, first + idx, "Malformed argument mask")); |
| } |
| |
| /* Check for mandatory arguments. */ |
| if (argp[idx].type == ARGT_STOP) { |
| if (idx < min_arg) { |
| |
| /* If miss other argument than the first one, we return an error. */ |
| if (idx > 0) |
| WILL_LJMP(luaL_argerror(L, first + idx, "Mandatory argument expected")); |
| |
| /* If first argument have a certain type, some default values |
| * may be used. See the function smp_resolve_args(). |
| */ |
| switch (mask & ARGT_MASK) { |
| |
| case ARGT_FE: |
| if (!(p->cap & PR_CAP_FE)) |
| WILL_LJMP(luaL_argerror(L, first + idx, "Mandatory argument expected")); |
| argp[idx].data.prx = p; |
| argp[idx].type = ARGT_FE; |
| argp[idx+1].type = ARGT_STOP; |
| break; |
| |
| case ARGT_BE: |
| if (!(p->cap & PR_CAP_BE)) |
| WILL_LJMP(luaL_argerror(L, first + idx, "Mandatory argument expected")); |
| argp[idx].data.prx = p; |
| argp[idx].type = ARGT_BE; |
| argp[idx+1].type = ARGT_STOP; |
| break; |
| |
| case ARGT_TAB: |
| argp[idx].data.prx = p; |
| argp[idx].type = ARGT_TAB; |
| argp[idx+1].type = ARGT_STOP; |
| break; |
| |
| default: |
| WILL_LJMP(luaL_argerror(L, first + idx, "Mandatory argument expected")); |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| /* Check for exceed the number of requiered argument. */ |
| if ((mask & ARGT_MASK) == ARGT_STOP && |
| argp[idx].type != ARGT_STOP) { |
| WILL_LJMP(luaL_argerror(L, first + idx, "Last argument expected")); |
| } |
| |
| if ((mask & ARGT_MASK) == ARGT_STOP && |
| argp[idx].type == ARGT_STOP) { |
| return 0; |
| } |
| |
| /* Convert some argument types. */ |
| switch (mask & ARGT_MASK) { |
| case ARGT_SINT: |
| if (argp[idx].type != ARGT_SINT) |
| WILL_LJMP(luaL_argerror(L, first + idx, "integer expected")); |
| argp[idx].type = ARGT_SINT; |
| break; |
| |
| case ARGT_TIME: |
| if (argp[idx].type != ARGT_SINT) |
| WILL_LJMP(luaL_argerror(L, first + idx, "integer expected")); |
| argp[idx].type = ARGT_TIME; |
| break; |
| |
| case ARGT_SIZE: |
| if (argp[idx].type != ARGT_SINT) |
| WILL_LJMP(luaL_argerror(L, first + idx, "integer expected")); |
| argp[idx].type = ARGT_SIZE; |
| break; |
| |
| case ARGT_FE: |
| if (argp[idx].type != ARGT_STR) |
| WILL_LJMP(luaL_argerror(L, first + idx, "string expected")); |
| memcpy(trash.str, argp[idx].data.str.str, argp[idx].data.str.len); |
| trash.str[argp[idx].data.str.len] = 0; |
| argp[idx].data.prx = proxy_fe_by_name(trash.str); |
| if (!argp[idx].data.prx) |
| WILL_LJMP(luaL_argerror(L, first + idx, "frontend doesn't exist")); |
| argp[idx].type = ARGT_FE; |
| break; |
| |
| case ARGT_BE: |
| if (argp[idx].type != ARGT_STR) |
| WILL_LJMP(luaL_argerror(L, first + idx, "string expected")); |
| memcpy(trash.str, argp[idx].data.str.str, argp[idx].data.str.len); |
| trash.str[argp[idx].data.str.len] = 0; |
| argp[idx].data.prx = proxy_be_by_name(trash.str); |
| if (!argp[idx].data.prx) |
| WILL_LJMP(luaL_argerror(L, first + idx, "backend doesn't exist")); |
| argp[idx].type = ARGT_BE; |
| break; |
| |
| case ARGT_TAB: |
| if (argp[idx].type != ARGT_STR) |
| WILL_LJMP(luaL_argerror(L, first + idx, "string expected")); |
| memcpy(trash.str, argp[idx].data.str.str, argp[idx].data.str.len); |
| trash.str[argp[idx].data.str.len] = 0; |
| argp[idx].data.prx = proxy_tbl_by_name(trash.str); |
| if (!argp[idx].data.prx) |
| WILL_LJMP(luaL_argerror(L, first + idx, "table doesn't exist")); |
| argp[idx].type = ARGT_TAB; |
| break; |
| |
| case ARGT_SRV: |
| if (argp[idx].type != ARGT_STR) |
| WILL_LJMP(luaL_argerror(L, first + idx, "string expected")); |
| memcpy(trash.str, argp[idx].data.str.str, argp[idx].data.str.len); |
| trash.str[argp[idx].data.str.len] = 0; |
| sname = strrchr(trash.str, '/'); |
| if (sname) { |
| *sname++ = '\0'; |
| pname = trash.str; |
| px = proxy_be_by_name(pname); |
| if (!px) |
| WILL_LJMP(luaL_argerror(L, first + idx, "backend doesn't exist")); |
| } |
| else { |
| sname = trash.str; |
| px = p; |
| } |
| argp[idx].data.srv = findserver(px, sname); |
| if (!argp[idx].data.srv) |
| WILL_LJMP(luaL_argerror(L, first + idx, "server doesn't exist")); |
| argp[idx].type = ARGT_SRV; |
| break; |
| |
| case ARGT_IPV4: |
| memcpy(trash.str, argp[idx].data.str.str, argp[idx].data.str.len); |
| trash.str[argp[idx].data.str.len] = 0; |
| if (inet_pton(AF_INET, trash.str, &argp[idx].data.ipv4)) |
| WILL_LJMP(luaL_argerror(L, first + idx, "invalid IPv4 address")); |
| argp[idx].type = ARGT_IPV4; |
| break; |
| |
| case ARGT_MSK4: |
| memcpy(trash.str, argp[idx].data.str.str, argp[idx].data.str.len); |
| trash.str[argp[idx].data.str.len] = 0; |
| if (!str2mask(trash.str, &argp[idx].data.ipv4)) |
| WILL_LJMP(luaL_argerror(L, first + idx, "invalid IPv4 mask")); |
| argp[idx].type = ARGT_MSK4; |
| break; |
| |
| case ARGT_IPV6: |
| memcpy(trash.str, argp[idx].data.str.str, argp[idx].data.str.len); |
| trash.str[argp[idx].data.str.len] = 0; |
| if (inet_pton(AF_INET6, trash.str, &argp[idx].data.ipv6)) |
| WILL_LJMP(luaL_argerror(L, first + idx, "invalid IPv6 address")); |
| argp[idx].type = ARGT_IPV6; |
| break; |
| |
| case ARGT_MSK6: |
| case ARGT_MAP: |
| case ARGT_REG: |
| case ARGT_USR: |
| WILL_LJMP(luaL_argerror(L, first + idx, "type not yet supported")); |
| break; |
| } |
| |
| /* Check for type of argument. */ |
| if ((mask & ARGT_MASK) != argp[idx].type) { |
| const char *msg = lua_pushfstring(L, "'%s' expected, got '%s'", |
| arg_type_names[(mask & ARGT_MASK)], |
| arg_type_names[argp[idx].type & ARGT_MASK]); |
| WILL_LJMP(luaL_argerror(L, first + idx, msg)); |
| } |
| |
| /* Next argument. */ |
| mask >>= ARGT_BITS; |
| idx++; |
| } |
| } |
| |
| /* |
| * The following functions are used to make correspondance between the the |
| * executed lua pointer and the "struct hlua *" that contain the context. |
| * |
| * - hlua_gethlua : return the hlua context associated with an lua_State. |
| * - hlua_sethlua : create the association between hlua context and lua_state. |
| */ |
| static inline struct hlua *hlua_gethlua(lua_State *L) |
| { |
| struct hlua **hlua = lua_getextraspace(L); |
| return *hlua; |
| } |
| static inline void hlua_sethlua(struct hlua *hlua) |
| { |
| struct hlua **hlua_store = lua_getextraspace(hlua->T); |
| *hlua_store = hlua; |
| } |
| |
| /* This function is used to send logs. It try to send on screen (stderr) |
| * and on the default syslog server. |
| */ |
| static inline void hlua_sendlog(struct proxy *px, int level, const char *msg) |
| { |
| struct tm tm; |
| char *p; |
| |
| /* Cleanup the log message. */ |
| p = trash.str; |
| for (; *msg != '\0'; msg++, p++) { |
| if (p >= trash.str + trash.size - 1) { |
| /* Break the message if exceed the buffer size. */ |
| *(p-4) = ' '; |
| *(p-3) = '.'; |
| *(p-2) = '.'; |
| *(p-1) = '.'; |
| break; |
| } |
| if (isprint(*msg)) |
| *p = *msg; |
| else |
| *p = '.'; |
| } |
| *p = '\0'; |
| |
| send_log(px, level, "%s\n", trash.str); |
| if (!(global.mode & MODE_QUIET) || (global.mode & (MODE_VERBOSE | MODE_STARTING))) { |
| get_localtime(date.tv_sec, &tm); |
| fprintf(stderr, "[%s] %03d/%02d%02d%02d (%d) : %s\n", |
| log_levels[level], tm.tm_yday, tm.tm_hour, tm.tm_min, tm.tm_sec, |
| (int)getpid(), trash.str); |
| fflush(stderr); |
| } |
| } |
| |
| /* This function just ensure that the yield will be always |
| * returned with a timeout and permit to set some flags |
| */ |
| __LJMP void hlua_yieldk(lua_State *L, int nresults, int ctx, |
| lua_KFunction k, int timeout, unsigned int flags) |
| { |
| struct hlua *hlua = hlua_gethlua(L); |
| |
| /* Set the wake timeout. If timeout is required, we set |
| * the expiration time. |
| */ |
| hlua->wake_time = timeout; |
| |
| hlua->flags |= flags; |
| |
| /* Process the yield. */ |
| WILL_LJMP(lua_yieldk(L, nresults, ctx, k)); |
| } |
| |
| /* This function initialises the Lua environment stored in the stream. |
| * It must be called at the start of the stream. This function creates |
| * an LUA coroutine. It can not be use to crete the main LUA context. |
| * |
| * This function is particular. it initialises a new Lua thread. If the |
| * initialisation fails (example: out of memory error), the lua function |
| * throws an error (longjmp). |
| * |
| * This function manipulates two Lua stack: the main and the thread. Only |
| * the main stack can fail. The thread is not manipulated. This function |
| * MUST NOT manipulate the created thread stack state, because is not |
| * proctected agains error throwed by the thread stack. |
| */ |
| int hlua_ctx_init(struct hlua *lua, struct task *task) |
| { |
| if (!SET_SAFE_LJMP(gL.T)) { |
| lua->Tref = LUA_REFNIL; |
| return 0; |
| } |
| lua->Mref = LUA_REFNIL; |
| lua->flags = 0; |
| LIST_INIT(&lua->com); |
| lua->T = lua_newthread(gL.T); |
| if (!lua->T) { |
| lua->Tref = LUA_REFNIL; |
| return 0; |
| } |
| hlua_sethlua(lua); |
| lua->Tref = luaL_ref(gL.T, LUA_REGISTRYINDEX); |
| lua->task = task; |
| RESET_SAFE_LJMP(gL.T); |
| return 1; |
| } |
| |
| /* Used to destroy the Lua coroutine when the attached stream or task |
| * is destroyed. The destroy also the memory context. The struct "lua" |
| * is not freed. |
| */ |
| void hlua_ctx_destroy(struct hlua *lua) |
| { |
| if (!lua->T) |
| return; |
| |
| /* Purge all the pending signals. */ |
| hlua_com_purge(lua); |
| |
| luaL_unref(lua->T, LUA_REGISTRYINDEX, lua->Mref); |
| luaL_unref(gL.T, LUA_REGISTRYINDEX, lua->Tref); |
| |
| /* Forces a garbage collecting process. If the Lua program is finished |
| * without error, we run the GC on the thread pointer. Its freed all |
| * the unused memory. |
| * If the thread is finnish with an error or is currently yielded, |
| * it seems that the GC applied on the thread doesn't clean anything, |
| * so e run the GC on the main thread. |
| * NOTE: maybe this action locks all the Lua threads untiml the en of |
| * the garbage collection. |
| */ |
| if (lua->flags & HLUA_MUST_GC) { |
| lua_gc(lua->T, LUA_GCCOLLECT, 0); |
| if (lua_status(lua->T) != LUA_OK) |
| lua_gc(gL.T, LUA_GCCOLLECT, 0); |
| } |
| |
| lua->T = NULL; |
| } |
| |
| /* This function is used to restore the Lua context when a coroutine |
| * fails. This function copy the common memory between old coroutine |
| * and the new coroutine. The old coroutine is destroyed, and its |
| * replaced by the new coroutine. |
| * If the flag "keep_msg" is set, the last entry of the old is assumed |
| * as string error message and it is copied in the new stack. |
| */ |
| static int hlua_ctx_renew(struct hlua *lua, int keep_msg) |
| { |
| lua_State *T; |
| int new_ref; |
| |
| /* Renew the main LUA stack doesn't have sense. */ |
| if (lua == &gL) |
| return 0; |
| |
| /* New Lua coroutine. */ |
| T = lua_newthread(gL.T); |
| if (!T) |
| return 0; |
| |
| /* Copy last error message. */ |
| if (keep_msg) |
| lua_xmove(lua->T, T, 1); |
| |
| /* Copy data between the coroutines. */ |
| lua_rawgeti(lua->T, LUA_REGISTRYINDEX, lua->Mref); |
| lua_xmove(lua->T, T, 1); |
| new_ref = luaL_ref(T, LUA_REGISTRYINDEX); /* Valur poped. */ |
| |
| /* Destroy old data. */ |
| luaL_unref(lua->T, LUA_REGISTRYINDEX, lua->Mref); |
| |
| /* The thread is garbage collected by Lua. */ |
| luaL_unref(gL.T, LUA_REGISTRYINDEX, lua->Tref); |
| |
| /* Fill the struct with the new coroutine values. */ |
| lua->Mref = new_ref; |
| lua->T = T; |
| lua->Tref = luaL_ref(gL.T, LUA_REGISTRYINDEX); |
| |
| /* Set context. */ |
| hlua_sethlua(lua); |
| |
| return 1; |
| } |
| |
| void hlua_hook(lua_State *L, lua_Debug *ar) |
| { |
| struct hlua *hlua = hlua_gethlua(L); |
| |
| /* Lua cannot yield when its returning from a function, |
| * so, we can fix the interrupt hook to 1 instruction, |
| * expecting that the function is finnished. |
| */ |
| if (lua_gethookmask(L) & LUA_MASKRET) { |
| lua_sethook(hlua->T, hlua_hook, LUA_MASKCOUNT, 1); |
| return; |
| } |
| |
| /* restore the interrupt condition. */ |
| lua_sethook(hlua->T, hlua_hook, LUA_MASKCOUNT, hlua_nb_instruction); |
| |
| /* If we interrupt the Lua processing in yieldable state, we yield. |
| * If the state is not yieldable, trying yield causes an error. |
| */ |
| if (lua_isyieldable(L)) |
| WILL_LJMP(hlua_yieldk(L, 0, 0, NULL, TICK_ETERNITY, HLUA_CTRLYIELD)); |
| |
| /* If we cannot yield, update the clock and check the timeout. */ |
| tv_update_date(0, 1); |
| hlua->run_time += now_ms - hlua->start_time; |
| if (hlua->max_time && hlua->run_time >= hlua->max_time) { |
| lua_pushfstring(L, "execution timeout"); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Update the start time. */ |
| hlua->start_time = now_ms; |
| |
| /* Try to interrupt the process at the end of the current |
| * unyieldable function. |
| */ |
| lua_sethook(hlua->T, hlua_hook, LUA_MASKRET|LUA_MASKCOUNT, hlua_nb_instruction); |
| } |
| |
| /* This function start or resumes the Lua stack execution. If the flag |
| * "yield_allowed" if no set and the LUA stack execution returns a yield |
| * The function return an error. |
| * |
| * The function can returns 4 values: |
| * - HLUA_E_OK : The execution is terminated without any errors. |
| * - HLUA_E_AGAIN : The execution must continue at the next associated |
| * task wakeup. |
| * - HLUA_E_ERRMSG : An error has occured, an error message is set in |
| * the top of the stack. |
| * - HLUA_E_ERR : An error has occured without error message. |
| * |
| * If an error occured, the stack is renewed and it is ready to run new |
| * LUA code. |
| */ |
| static enum hlua_exec hlua_ctx_resume(struct hlua *lua, int yield_allowed) |
| { |
| int ret; |
| const char *msg; |
| |
| /* Initialise run time counter. */ |
| if (!HLUA_IS_RUNNING(lua)) |
| lua->run_time = 0; |
| |
| resume_execution: |
| |
| /* This hook interrupts the Lua processing each 'hlua_nb_instruction' |
| * instructions. it is used for preventing infinite loops. |
| */ |
| lua_sethook(lua->T, hlua_hook, LUA_MASKCOUNT, hlua_nb_instruction); |
| |
| /* Remove all flags except the running flags. */ |
| HLUA_SET_RUN(lua); |
| HLUA_CLR_CTRLYIELD(lua); |
| HLUA_CLR_WAKERESWR(lua); |
| HLUA_CLR_WAKEREQWR(lua); |
| |
| /* Update the start time. */ |
| lua->start_time = now_ms; |
| |
| /* Call the function. */ |
| ret = lua_resume(lua->T, gL.T, lua->nargs); |
| switch (ret) { |
| |
| case LUA_OK: |
| ret = HLUA_E_OK; |
| break; |
| |
| case LUA_YIELD: |
| /* Check if the execution timeout is expired. It it is the case, we |
| * break the Lua execution. |
| */ |
| tv_update_date(0, 1); |
| lua->run_time += now_ms - lua->start_time; |
| if (lua->max_time && lua->run_time > lua->max_time) { |
| lua_settop(lua->T, 0); /* Empty the stack. */ |
| if (!lua_checkstack(lua->T, 1)) { |
| ret = HLUA_E_ERR; |
| break; |
| } |
| lua_pushfstring(lua->T, "execution timeout"); |
| ret = HLUA_E_ERRMSG; |
| break; |
| } |
| /* Process the forced yield. if the general yield is not allowed or |
| * if no task were associated this the current Lua execution |
| * coroutine, we resume the execution. Else we want to return in the |
| * scheduler and we want to be waked up again, to continue the |
| * current Lua execution. So we schedule our own task. |
| */ |
| if (HLUA_IS_CTRLYIELDING(lua)) { |
| if (!yield_allowed || !lua->task) |
| goto resume_execution; |
| task_wakeup(lua->task, TASK_WOKEN_MSG); |
| } |
| if (!yield_allowed) { |
| lua_settop(lua->T, 0); /* Empty the stack. */ |
| if (!lua_checkstack(lua->T, 1)) { |
| ret = HLUA_E_ERR; |
| break; |
| } |
| lua_pushfstring(lua->T, "yield not allowed"); |
| ret = HLUA_E_ERRMSG; |
| break; |
| } |
| ret = HLUA_E_AGAIN; |
| break; |
| |
| case LUA_ERRRUN: |
| |
| /* Special exit case. The traditionnal exit is returned as an error |
| * because the errors ares the only one mean to return immediately |
| * from and lua execution. |
| */ |
| if (lua->flags & HLUA_EXIT) { |
| ret = HLUA_E_OK; |
| hlua_ctx_renew(lua, 0); |
| break; |
| } |
| |
| lua->wake_time = TICK_ETERNITY; |
| if (!lua_checkstack(lua->T, 1)) { |
| ret = HLUA_E_ERR; |
| break; |
| } |
| msg = lua_tostring(lua->T, -1); |
| lua_settop(lua->T, 0); /* Empty the stack. */ |
| lua_pop(lua->T, 1); |
| if (msg) |
| lua_pushfstring(lua->T, "runtime error: %s", msg); |
| else |
| lua_pushfstring(lua->T, "unknown runtime error"); |
| ret = HLUA_E_ERRMSG; |
| break; |
| |
| case LUA_ERRMEM: |
| lua->wake_time = TICK_ETERNITY; |
| lua_settop(lua->T, 0); /* Empty the stack. */ |
| if (!lua_checkstack(lua->T, 1)) { |
| ret = HLUA_E_ERR; |
| break; |
| } |
| lua_pushfstring(lua->T, "out of memory error"); |
| ret = HLUA_E_ERRMSG; |
| break; |
| |
| case LUA_ERRERR: |
| lua->wake_time = TICK_ETERNITY; |
| if (!lua_checkstack(lua->T, 1)) { |
| ret = HLUA_E_ERR; |
| break; |
| } |
| msg = lua_tostring(lua->T, -1); |
| lua_settop(lua->T, 0); /* Empty the stack. */ |
| lua_pop(lua->T, 1); |
| if (msg) |
| lua_pushfstring(lua->T, "message handler error: %s", msg); |
| else |
| lua_pushfstring(lua->T, "message handler error"); |
| ret = HLUA_E_ERRMSG; |
| break; |
| |
| default: |
| lua->wake_time = TICK_ETERNITY; |
| lua_settop(lua->T, 0); /* Empty the stack. */ |
| if (!lua_checkstack(lua->T, 1)) { |
| ret = HLUA_E_ERR; |
| break; |
| } |
| lua_pushfstring(lua->T, "unknonwn error"); |
| ret = HLUA_E_ERRMSG; |
| break; |
| } |
| |
| /* This GC permits to destroy some object when a Lua timeout strikes. */ |
| if (lua->flags & HLUA_MUST_GC && |
| ret != HLUA_E_AGAIN) |
| lua_gc(lua->T, LUA_GCCOLLECT, 0); |
| |
| switch (ret) { |
| case HLUA_E_AGAIN: |
| break; |
| |
| case HLUA_E_ERRMSG: |
| hlua_com_purge(lua); |
| hlua_ctx_renew(lua, 1); |
| HLUA_CLR_RUN(lua); |
| break; |
| |
| case HLUA_E_ERR: |
| HLUA_CLR_RUN(lua); |
| hlua_com_purge(lua); |
| hlua_ctx_renew(lua, 0); |
| break; |
| |
| case HLUA_E_OK: |
| HLUA_CLR_RUN(lua); |
| hlua_com_purge(lua); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* This function exit the current code. */ |
| __LJMP static int hlua_done(lua_State *L) |
| { |
| struct hlua *hlua = hlua_gethlua(L); |
| |
| hlua->flags |= HLUA_EXIT; |
| WILL_LJMP(lua_error(L)); |
| |
| return 0; |
| } |
| |
| /* This function is an LUA binding. It provides a function |
| * for deleting ACL from a referenced ACL file. |
| */ |
| __LJMP static int hlua_del_acl(lua_State *L) |
| { |
| const char *name; |
| const char *key; |
| struct pat_ref *ref; |
| |
| MAY_LJMP(check_args(L, 2, "del_acl")); |
| |
| name = MAY_LJMP(luaL_checkstring(L, 1)); |
| key = MAY_LJMP(luaL_checkstring(L, 2)); |
| |
| ref = pat_ref_lookup(name); |
| if (!ref) |
| WILL_LJMP(luaL_error(L, "'del_acl': unknown acl file '%s'", name)); |
| |
| pat_ref_delete(ref, key); |
| return 0; |
| } |
| |
| /* This function is an LUA binding. It provides a function |
| * for deleting map entry from a referenced map file. |
| */ |
| static int hlua_del_map(lua_State *L) |
| { |
| const char *name; |
| const char *key; |
| struct pat_ref *ref; |
| |
| MAY_LJMP(check_args(L, 2, "del_map")); |
| |
| name = MAY_LJMP(luaL_checkstring(L, 1)); |
| key = MAY_LJMP(luaL_checkstring(L, 2)); |
| |
| ref = pat_ref_lookup(name); |
| if (!ref) |
| WILL_LJMP(luaL_error(L, "'del_map': unknown acl file '%s'", name)); |
| |
| pat_ref_delete(ref, key); |
| return 0; |
| } |
| |
| /* This function is an LUA binding. It provides a function |
| * for adding ACL pattern from a referenced ACL file. |
| */ |
| static int hlua_add_acl(lua_State *L) |
| { |
| const char *name; |
| const char *key; |
| struct pat_ref *ref; |
| |
| MAY_LJMP(check_args(L, 2, "add_acl")); |
| |
| name = MAY_LJMP(luaL_checkstring(L, 1)); |
| key = MAY_LJMP(luaL_checkstring(L, 2)); |
| |
| ref = pat_ref_lookup(name); |
| if (!ref) |
| WILL_LJMP(luaL_error(L, "'add_acl': unknown acl file '%s'", name)); |
| |
| if (pat_ref_find_elt(ref, key) == NULL) |
| pat_ref_add(ref, key, NULL, NULL); |
| return 0; |
| } |
| |
| /* This function is an LUA binding. It provides a function |
| * for setting map pattern and sample from a referenced map |
| * file. |
| */ |
| static int hlua_set_map(lua_State *L) |
| { |
| const char *name; |
| const char *key; |
| const char *value; |
| struct pat_ref *ref; |
| |
| MAY_LJMP(check_args(L, 3, "set_map")); |
| |
| name = MAY_LJMP(luaL_checkstring(L, 1)); |
| key = MAY_LJMP(luaL_checkstring(L, 2)); |
| value = MAY_LJMP(luaL_checkstring(L, 3)); |
| |
| ref = pat_ref_lookup(name); |
| if (!ref) |
| WILL_LJMP(luaL_error(L, "'set_map': unknown map file '%s'", name)); |
| |
| if (pat_ref_find_elt(ref, key) != NULL) |
| pat_ref_set(ref, key, value, NULL); |
| else |
| pat_ref_add(ref, key, value, NULL); |
| return 0; |
| } |
| |
| /* A class is a lot of memory that contain data. This data can be a table, |
| * an integer or user data. This data is associated with a metatable. This |
| * metatable have an original version registred in the global context with |
| * the name of the object (_G[<name>] = <metable> ). |
| * |
| * A metable is a table that modify the standard behavior of a standard |
| * access to the associated data. The entries of this new metatable are |
| * defined as is: |
| * |
| * http://lua-users.org/wiki/MetatableEvents |
| * |
| * __index |
| * |
| * we access an absent field in a table, the result is nil. This is |
| * true, but it is not the whole truth. Actually, such access triggers |
| * the interpreter to look for an __index metamethod: If there is no |
| * such method, as usually happens, then the access results in nil; |
| * otherwise, the metamethod will provide the result. |
| * |
| * Control 'prototype' inheritance. When accessing "myTable[key]" and |
| * the key does not appear in the table, but the metatable has an __index |
| * property: |
| * |
| * - if the value is a function, the function is called, passing in the |
| * table and the key; the return value of that function is returned as |
| * the result. |
| * |
| * - if the value is another table, the value of the key in that table is |
| * asked for and returned (and if it doesn't exist in that table, but that |
| * table's metatable has an __index property, then it continues on up) |
| * |
| * - Use "rawget(myTable,key)" to skip this metamethod. |
| * |
| * http://www.lua.org/pil/13.4.1.html |
| * |
| * __newindex |
| * |
| * Like __index, but control property assignment. |
| * |
| * __mode - Control weak references. A string value with one or both |
| * of the characters 'k' and 'v' which specifies that the the |
| * keys and/or values in the table are weak references. |
| * |
| * __call - Treat a table like a function. When a table is followed by |
| * parenthesis such as "myTable( 'foo' )" and the metatable has |
| * a __call key pointing to a function, that function is invoked |
| * (passing any specified arguments) and the return value is |
| * returned. |
| * |
| * __metatable - Hide the metatable. When "getmetatable( myTable )" is |
| * called, if the metatable for myTable has a __metatable |
| * key, the value of that key is returned instead of the |
| * actual metatable. |
| * |
| * __tostring - Control string representation. When the builtin |
| * "tostring( myTable )" function is called, if the metatable |
| * for myTable has a __tostring property set to a function, |
| * that function is invoked (passing myTable to it) and the |
| * return value is used as the string representation. |
| * |
| * __len - Control table length. When the table length is requested using |
| * the length operator ( '#' ), if the metatable for myTable has |
| * a __len key pointing to a function, that function is invoked |
| * (passing myTable to it) and the return value used as the value |
| * of "#myTable". |
| * |
| * __gc - Userdata finalizer code. When userdata is set to be garbage |
| * collected, if the metatable has a __gc field pointing to a |
| * function, that function is first invoked, passing the userdata |
| * to it. The __gc metamethod is not called for tables. |
| * (See http://lua-users.org/lists/lua-l/2006-11/msg00508.html) |
| * |
| * Special metamethods for redefining standard operators: |
| * http://www.lua.org/pil/13.1.html |
| * |
| * __add "+" |
| * __sub "-" |
| * __mul "*" |
| * __div "/" |
| * __unm "!" |
| * __pow "^" |
| * __concat ".." |
| * |
| * Special methods for redfining standar relations |
| * http://www.lua.org/pil/13.2.html |
| * |
| * __eq "==" |
| * __lt "<" |
| * __le "<=" |
| */ |
| |
| /* |
| * |
| * |
| * Class Map |
| * |
| * |
| */ |
| |
| /* Returns a struct hlua_map if the stack entry "ud" is |
| * a class session, otherwise it throws an error. |
| */ |
| __LJMP static struct map_descriptor *hlua_checkmap(lua_State *L, int ud) |
| { |
| return (struct map_descriptor *)MAY_LJMP(hlua_checkudata(L, ud, class_map_ref)); |
| } |
| |
| /* This function is the map constructor. It don't need |
| * the class Map object. It creates and return a new Map |
| * object. It must be called only during "body" or "init" |
| * context because it process some filesystem accesses. |
| */ |
| __LJMP static int hlua_map_new(struct lua_State *L) |
| { |
| const char *fn; |
| int match = PAT_MATCH_STR; |
| struct sample_conv conv; |
| const char *file = ""; |
| int line = 0; |
| lua_Debug ar; |
| char *err = NULL; |
| struct arg args[2]; |
| |
| if (lua_gettop(L) < 1 || lua_gettop(L) > 2) |
| WILL_LJMP(luaL_error(L, "'new' needs at least 1 argument.")); |
| |
| fn = MAY_LJMP(luaL_checkstring(L, 1)); |
| |
| if (lua_gettop(L) >= 2) { |
| match = MAY_LJMP(luaL_checkinteger(L, 2)); |
| if (match < 0 || match >= PAT_MATCH_NUM) |
| WILL_LJMP(luaL_error(L, "'new' needs a valid match method.")); |
| } |
| |
| /* Get Lua filename and line number. */ |
| if (lua_getstack(L, 1, &ar)) { /* check function at level */ |
| lua_getinfo(L, "Sl", &ar); /* get info about it */ |
| if (ar.currentline > 0) { /* is there info? */ |
| file = ar.short_src; |
| line = ar.currentline; |
| } |
| } |
| |
| /* fill fake sample_conv struct. */ |
| conv.kw = ""; /* unused. */ |
| conv.process = NULL; /* unused. */ |
| conv.arg_mask = 0; /* unused. */ |
| conv.val_args = NULL; /* unused. */ |
| conv.out_type = SMP_T_STR; |
| conv.private = (void *)(long)match; |
| switch (match) { |
| case PAT_MATCH_STR: conv.in_type = SMP_T_STR; break; |
| case PAT_MATCH_BEG: conv.in_type = SMP_T_STR; break; |
| case PAT_MATCH_SUB: conv.in_type = SMP_T_STR; break; |
| case PAT_MATCH_DIR: conv.in_type = SMP_T_STR; break; |
| case PAT_MATCH_DOM: conv.in_type = SMP_T_STR; break; |
| case PAT_MATCH_END: conv.in_type = SMP_T_STR; break; |
| case PAT_MATCH_REG: conv.in_type = SMP_T_STR; break; |
| case PAT_MATCH_INT: conv.in_type = SMP_T_SINT; break; |
| case PAT_MATCH_IP: conv.in_type = SMP_T_ADDR; break; |
| default: |
| WILL_LJMP(luaL_error(L, "'new' doesn't support this match mode.")); |
| } |
| |
| /* fill fake args. */ |
| args[0].type = ARGT_STR; |
| args[0].data.str.str = (char *)fn; |
| args[1].type = ARGT_STOP; |
| |
| /* load the map. */ |
| if (!sample_load_map(args, &conv, file, line, &err)) { |
| /* error case: we cant use luaL_error because we must |
| * free the err variable. |
| */ |
| luaL_where(L, 1); |
| lua_pushfstring(L, "'new': %s.", err); |
| lua_concat(L, 2); |
| free(err); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* create the lua object. */ |
| lua_newtable(L); |
| lua_pushlightuserdata(L, args[0].data.map); |
| lua_rawseti(L, -2, 0); |
| |
| /* Pop a class Map metatable and affect it to the userdata. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_map_ref); |
| lua_setmetatable(L, -2); |
| |
| |
| return 1; |
| } |
| |
| __LJMP static inline int _hlua_map_lookup(struct lua_State *L, int str) |
| { |
| struct map_descriptor *desc; |
| struct pattern *pat; |
| struct sample smp; |
| |
| MAY_LJMP(check_args(L, 2, "lookup")); |
| desc = MAY_LJMP(hlua_checkmap(L, 1)); |
| if (desc->pat.expect_type == SMP_T_SINT) { |
| smp.data.type = SMP_T_SINT; |
| smp.data.u.sint = MAY_LJMP(luaL_checkinteger(L, 2)); |
| } |
| else { |
| smp.data.type = SMP_T_STR; |
| smp.flags = SMP_F_CONST; |
| smp.data.u.str.str = (char *)MAY_LJMP(luaL_checklstring(L, 2, (size_t *)&smp.data.u.str.len)); |
| } |
| |
| pat = pattern_exec_match(&desc->pat, &smp, 1); |
| if (!pat || !pat->data) { |
| if (str) |
| lua_pushstring(L, ""); |
| else |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| /* The Lua pattern must return a string, so we can't check the returned type */ |
| lua_pushlstring(L, pat->data->u.str.str, pat->data->u.str.len); |
| return 1; |
| } |
| |
| __LJMP static int hlua_map_lookup(struct lua_State *L) |
| { |
| return _hlua_map_lookup(L, 0); |
| } |
| |
| __LJMP static int hlua_map_slookup(struct lua_State *L) |
| { |
| return _hlua_map_lookup(L, 1); |
| } |
| |
| /* |
| * |
| * |
| * Class Socket |
| * |
| * |
| */ |
| |
| __LJMP static struct hlua_socket *hlua_checksocket(lua_State *L, int ud) |
| { |
| return (struct hlua_socket *)MAY_LJMP(hlua_checkudata(L, ud, class_socket_ref)); |
| } |
| |
| /* This function is the handler called for each I/O on the established |
| * connection. It is used for notify space avalaible to send or data |
| * received. |
| */ |
| static void hlua_socket_handler(struct appctx *appctx) |
| { |
| struct stream_interface *si = appctx->owner; |
| struct connection *c = objt_conn(si_opposite(si)->end); |
| |
| /* If the connection object is not avalaible, close all the |
| * streams and wakeup everithing waiting for. |
| */ |
| if (!c) { |
| si_shutw(si); |
| si_shutr(si); |
| si_ic(si)->flags |= CF_READ_NULL; |
| hlua_com_wake(&appctx->ctx.hlua.wake_on_read); |
| hlua_com_wake(&appctx->ctx.hlua.wake_on_write); |
| return; |
| } |
| |
| /* If we cant write, wakeup the pending write signals. */ |
| if (channel_output_closed(si_ic(si))) |
| hlua_com_wake(&appctx->ctx.hlua.wake_on_write); |
| |
| /* If we cant read, wakeup the pending read signals. */ |
| if (channel_input_closed(si_oc(si))) |
| hlua_com_wake(&appctx->ctx.hlua.wake_on_read); |
| |
| /* if the connection is not estabkished, inform the stream that we want |
| * to be notified whenever the connection completes. |
| */ |
| if (!(c->flags & CO_FL_CONNECTED)) { |
| si_applet_cant_get(si); |
| si_applet_cant_put(si); |
| return; |
| } |
| |
| /* This function is called after the connect. */ |
| appctx->ctx.hlua.connected = 1; |
| |
| /* Wake the tasks which wants to write if the buffer have avalaible space. */ |
| if (channel_may_recv(si_ic(si))) |
| hlua_com_wake(&appctx->ctx.hlua.wake_on_write); |
| |
| /* Wake the tasks which wants to read if the buffer contains data. */ |
| if (!channel_is_empty(si_oc(si))) |
| hlua_com_wake(&appctx->ctx.hlua.wake_on_read); |
| } |
| |
| /* This function is called when the "struct stream" is destroyed. |
| * Remove the link from the object to this stream. |
| * Wake all the pending signals. |
| */ |
| static void hlua_socket_release(struct appctx *appctx) |
| { |
| /* Remove my link in the original object. */ |
| if (appctx->ctx.hlua.socket) |
| appctx->ctx.hlua.socket->s = NULL; |
| |
| /* Wake all the task waiting for me. */ |
| hlua_com_wake(&appctx->ctx.hlua.wake_on_read); |
| hlua_com_wake(&appctx->ctx.hlua.wake_on_write); |
| } |
| |
| /* If the garbage collectio of the object is launch, nobody |
| * uses this object. If the stream does not exists, just quit. |
| * Send the shutdown signal to the stream. In some cases, |
| * pending signal can rest in the read and write lists. destroy |
| * it. |
| */ |
| __LJMP static int hlua_socket_gc(lua_State *L) |
| { |
| struct hlua_socket *socket; |
| struct appctx *appctx; |
| |
| MAY_LJMP(check_args(L, 1, "__gc")); |
| |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| if (!socket->s) |
| return 0; |
| |
| /* Remove all reference between the Lua stack and the coroutine stream. */ |
| appctx = objt_appctx(socket->s->si[0].end); |
| stream_shutdown(socket->s, SF_ERR_KILLED); |
| socket->s = NULL; |
| appctx->ctx.hlua.socket = NULL; |
| |
| return 0; |
| } |
| |
| /* The close function send shutdown signal and break the |
| * links between the stream and the object. |
| */ |
| __LJMP static int hlua_socket_close(lua_State *L) |
| { |
| struct hlua_socket *socket; |
| struct appctx *appctx; |
| |
| MAY_LJMP(check_args(L, 1, "close")); |
| |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| if (!socket->s) |
| return 0; |
| |
| /* Close the stream and remove the associated stop task. */ |
| stream_shutdown(socket->s, SF_ERR_KILLED); |
| appctx = objt_appctx(socket->s->si[0].end); |
| appctx->ctx.hlua.socket = NULL; |
| socket->s = NULL; |
| |
| return 0; |
| } |
| |
| /* This Lua function assumes that the stack contain three parameters. |
| * 1 - USERDATA containing a struct socket |
| * 2 - INTEGER with values of the macro defined below |
| * If the integer is -1, we must read at most one line. |
| * If the integer is -2, we ust read all the data until the |
| * end of the stream. |
| * If the integer is positive value, we must read a number of |
| * bytes corresponding to this value. |
| */ |
| #define HLSR_READ_LINE (-1) |
| #define HLSR_READ_ALL (-2) |
| __LJMP static int hlua_socket_receive_yield(struct lua_State *L, int status, lua_KContext ctx) |
| { |
| struct hlua_socket *socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| int wanted = lua_tointeger(L, 2); |
| struct hlua *hlua = hlua_gethlua(L); |
| struct appctx *appctx; |
| int len; |
| int nblk; |
| char *blk1; |
| int len1; |
| char *blk2; |
| int len2; |
| int skip_at_end = 0; |
| struct channel *oc; |
| |
| /* Check if this lua stack is schedulable. */ |
| if (!hlua || !hlua->task) |
| WILL_LJMP(luaL_error(L, "The 'receive' function is only allowed in " |
| "'frontend', 'backend' or 'task'")); |
| |
| /* check for connection closed. If some data where read, return it. */ |
| if (!socket->s) |
| goto connection_closed; |
| |
| oc = &socket->s->res; |
| if (wanted == HLSR_READ_LINE) { |
| /* Read line. */ |
| nblk = bo_getline_nc(oc, &blk1, &len1, &blk2, &len2); |
| if (nblk < 0) /* Connection close. */ |
| goto connection_closed; |
| if (nblk == 0) /* No data avalaible. */ |
| goto connection_empty; |
| |
| /* remove final \r\n. */ |
| if (nblk == 1) { |
| if (blk1[len1-1] == '\n') { |
| len1--; |
| skip_at_end++; |
| if (blk1[len1-1] == '\r') { |
| len1--; |
| skip_at_end++; |
| } |
| } |
| } |
| else { |
| if (blk2[len2-1] == '\n') { |
| len2--; |
| skip_at_end++; |
| if (blk2[len2-1] == '\r') { |
| len2--; |
| skip_at_end++; |
| } |
| } |
| } |
| } |
| |
| else if (wanted == HLSR_READ_ALL) { |
| /* Read all the available data. */ |
| nblk = bo_getblk_nc(oc, &blk1, &len1, &blk2, &len2); |
| if (nblk < 0) /* Connection close. */ |
| goto connection_closed; |
| if (nblk == 0) /* No data avalaible. */ |
| goto connection_empty; |
| } |
| |
| else { |
| /* Read a block of data. */ |
| nblk = bo_getblk_nc(oc, &blk1, &len1, &blk2, &len2); |
| if (nblk < 0) /* Connection close. */ |
| goto connection_closed; |
| if (nblk == 0) /* No data avalaible. */ |
| goto connection_empty; |
| |
| if (len1 > wanted) { |
| nblk = 1; |
| len1 = wanted; |
| } if (nblk == 2 && len1 + len2 > wanted) |
| len2 = wanted - len1; |
| } |
| |
| len = len1; |
| |
| luaL_addlstring(&socket->b, blk1, len1); |
| if (nblk == 2) { |
| len += len2; |
| luaL_addlstring(&socket->b, blk2, len2); |
| } |
| |
| /* Consume data. */ |
| bo_skip(oc, len + skip_at_end); |
| |
| /* Don't wait anything. */ |
| stream_int_notify(&socket->s->si[0]); |
| stream_int_update_applet(&socket->s->si[0]); |
| |
| /* If the pattern reclaim to read all the data |
| * in the connection, got out. |
| */ |
| if (wanted == HLSR_READ_ALL) |
| goto connection_empty; |
| else if (wanted >= 0 && len < wanted) |
| goto connection_empty; |
| |
| /* Return result. */ |
| luaL_pushresult(&socket->b); |
| return 1; |
| |
| connection_closed: |
| |
| /* If the buffer containds data. */ |
| if (socket->b.n > 0) { |
| luaL_pushresult(&socket->b); |
| return 1; |
| } |
| lua_pushnil(L); |
| lua_pushstring(L, "connection closed."); |
| return 2; |
| |
| connection_empty: |
| |
| appctx = objt_appctx(socket->s->si[0].end); |
| if (!hlua_com_new(hlua, &appctx->ctx.hlua.wake_on_read)) |
| WILL_LJMP(luaL_error(L, "out of memory")); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_socket_receive_yield, TICK_ETERNITY, 0)); |
| return 0; |
| } |
| |
| /* This Lus function gets two parameters. The first one can be string |
| * or a number. If the string is "*l", the user require one line. If |
| * the string is "*a", the user require all the content of the stream. |
| * If the value is a number, the user require a number of bytes equal |
| * to the value. The default value is "*l" (a line). |
| * |
| * This paraeter with a variable type is converted in integer. This |
| * integer takes this values: |
| * -1 : read a line |
| * -2 : read all the stream |
| * >0 : amount if bytes. |
| * |
| * The second parameter is optinal. It contains a string that must be |
| * concatenated with the read data. |
| */ |
| __LJMP static int hlua_socket_receive(struct lua_State *L) |
| { |
| int wanted = HLSR_READ_LINE; |
| const char *pattern; |
| int type; |
| char *error; |
| size_t len; |
| struct hlua_socket *socket; |
| |
| if (lua_gettop(L) < 1 || lua_gettop(L) > 3) |
| WILL_LJMP(luaL_error(L, "The 'receive' function requires between 1 and 3 arguments.")); |
| |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| |
| /* check for pattern. */ |
| if (lua_gettop(L) >= 2) { |
| type = lua_type(L, 2); |
| if (type == LUA_TSTRING) { |
| pattern = lua_tostring(L, 2); |
| if (strcmp(pattern, "*a") == 0) |
| wanted = HLSR_READ_ALL; |
| else if (strcmp(pattern, "*l") == 0) |
| wanted = HLSR_READ_LINE; |
| else { |
| wanted = strtoll(pattern, &error, 10); |
| if (*error != '\0') |
| WILL_LJMP(luaL_error(L, "Unsupported pattern.")); |
| } |
| } |
| else if (type == LUA_TNUMBER) { |
| wanted = lua_tointeger(L, 2); |
| if (wanted < 0) |
| WILL_LJMP(luaL_error(L, "Unsupported size.")); |
| } |
| } |
| |
| /* Set pattern. */ |
| lua_pushinteger(L, wanted); |
| lua_replace(L, 2); |
| |
| /* init bufffer, and fiil it wih prefix. */ |
| luaL_buffinit(L, &socket->b); |
| |
| /* Check prefix. */ |
| if (lua_gettop(L) >= 3) { |
| if (lua_type(L, 3) != LUA_TSTRING) |
| WILL_LJMP(luaL_error(L, "Expect a 'string' for the prefix")); |
| pattern = lua_tolstring(L, 3, &len); |
| luaL_addlstring(&socket->b, pattern, len); |
| } |
| |
| return __LJMP(hlua_socket_receive_yield(L, 0, 0)); |
| } |
| |
| /* Write the Lua input string in the output buffer. |
| * This fucntion returns a yield if no space are available. |
| */ |
| static int hlua_socket_write_yield(struct lua_State *L,int status, lua_KContext ctx) |
| { |
| struct hlua_socket *socket; |
| struct hlua *hlua = hlua_gethlua(L); |
| struct appctx *appctx; |
| size_t buf_len; |
| const char *buf; |
| int len; |
| int send_len; |
| int sent; |
| |
| /* Check if this lua stack is schedulable. */ |
| if (!hlua || !hlua->task) |
| WILL_LJMP(luaL_error(L, "The 'write' function is only allowed in " |
| "'frontend', 'backend' or 'task'")); |
| |
| /* Get object */ |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| buf = MAY_LJMP(luaL_checklstring(L, 2, &buf_len)); |
| sent = MAY_LJMP(luaL_checkinteger(L, 3)); |
| |
| /* Check for connection close. */ |
| if (!socket->s || channel_output_closed(&socket->s->req)) { |
| lua_pushinteger(L, -1); |
| return 1; |
| } |
| |
| /* Update the input buffer data. */ |
| buf += sent; |
| send_len = buf_len - sent; |
| |
| /* All the data are sent. */ |
| if (sent >= buf_len) |
| return 1; /* Implicitly return the length sent. */ |
| |
| /* Check if the buffer is avalaible because HAProxy doesn't allocate |
| * the request buffer if its not required. |
| */ |
| if (socket->s->req.buf->size == 0) { |
| if (!stream_alloc_recv_buffer(&socket->s->req)) { |
| socket->s->si[0].flags |= SI_FL_WAIT_ROOM; |
| goto hlua_socket_write_yield_return; |
| } |
| } |
| |
| /* Check for avalaible space. */ |
| len = buffer_total_space(socket->s->req.buf); |
| if (len <= 0) |
| goto hlua_socket_write_yield_return; |
| |
| /* send data */ |
| if (len < send_len) |
| send_len = len; |
| len = bi_putblk(&socket->s->req, buf+sent, send_len); |
| |
| /* "Not enough space" (-1), "Buffer too little to contain |
| * the data" (-2) are not expected because the available length |
| * is tested. |
| * Other unknown error are also not expected. |
| */ |
| if (len <= 0) { |
| if (len == -1) |
| socket->s->req.flags |= CF_WAKE_WRITE; |
| |
| MAY_LJMP(hlua_socket_close(L)); |
| lua_pop(L, 1); |
| lua_pushinteger(L, -1); |
| return 1; |
| } |
| |
| /* update buffers. */ |
| stream_int_notify(&socket->s->si[0]); |
| stream_int_update_applet(&socket->s->si[0]); |
| |
| socket->s->req.rex = TICK_ETERNITY; |
| socket->s->res.wex = TICK_ETERNITY; |
| |
| /* Update length sent. */ |
| lua_pop(L, 1); |
| lua_pushinteger(L, sent + len); |
| |
| /* All the data buffer is sent ? */ |
| if (sent + len >= buf_len) |
| return 1; |
| |
| hlua_socket_write_yield_return: |
| appctx = objt_appctx(socket->s->si[0].end); |
| if (!hlua_com_new(hlua, &appctx->ctx.hlua.wake_on_write)) |
| WILL_LJMP(luaL_error(L, "out of memory")); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_socket_write_yield, TICK_ETERNITY, 0)); |
| return 0; |
| } |
| |
| /* This function initiate the send of data. It just check the input |
| * parameters and push an integer in the Lua stack that contain the |
| * amount of data writed in the buffer. This is used by the function |
| * "hlua_socket_write_yield" that can yield. |
| * |
| * The Lua function gets between 3 and 4 parameters. The first one is |
| * the associated object. The second is a string buffer. The third is |
| * a facultative integer that represents where is the buffer position |
| * of the start of the data that can send. The first byte is the |
| * position "1". The default value is "1". The fourth argument is a |
| * facultative integer that represents where is the buffer position |
| * of the end of the data that can send. The default is the last byte. |
| */ |
| static int hlua_socket_send(struct lua_State *L) |
| { |
| int i; |
| int j; |
| const char *buf; |
| size_t buf_len; |
| |
| /* Check number of arguments. */ |
| if (lua_gettop(L) < 2 || lua_gettop(L) > 4) |
| WILL_LJMP(luaL_error(L, "'send' needs between 2 and 4 arguments")); |
| |
| /* Get the string. */ |
| buf = MAY_LJMP(luaL_checklstring(L, 2, &buf_len)); |
| |
| /* Get and check j. */ |
| if (lua_gettop(L) == 4) { |
| j = MAY_LJMP(luaL_checkinteger(L, 4)); |
| if (j < 0) |
| j = buf_len + j + 1; |
| if (j > buf_len) |
| j = buf_len + 1; |
| lua_pop(L, 1); |
| } |
| else |
| j = buf_len; |
| |
| /* Get and check i. */ |
| if (lua_gettop(L) == 3) { |
| i = MAY_LJMP(luaL_checkinteger(L, 3)); |
| if (i < 0) |
| i = buf_len + i + 1; |
| if (i > buf_len) |
| i = buf_len + 1; |
| lua_pop(L, 1); |
| } else |
| i = 1; |
| |
| /* Check bth i and j. */ |
| if (i > j) { |
| lua_pushinteger(L, 0); |
| return 1; |
| } |
| if (i == 0 && j == 0) { |
| lua_pushinteger(L, 0); |
| return 1; |
| } |
| if (i == 0) |
| i = 1; |
| if (j == 0) |
| j = 1; |
| |
| /* Pop the string. */ |
| lua_pop(L, 1); |
| |
| /* Update the buffer length. */ |
| buf += i - 1; |
| buf_len = j - i + 1; |
| lua_pushlstring(L, buf, buf_len); |
| |
| /* This unsigned is used to remember the amount of sent data. */ |
| lua_pushinteger(L, 0); |
| |
| return MAY_LJMP(hlua_socket_write_yield(L, 0, 0)); |
| } |
| |
| #define SOCKET_INFO_MAX_LEN sizeof("[0000:0000:0000:0000:0000:0000:0000:0000]:12345") |
| __LJMP static inline int hlua_socket_info(struct lua_State *L, struct sockaddr_storage *addr) |
| { |
| static char buffer[SOCKET_INFO_MAX_LEN]; |
| int ret; |
| int len; |
| char *p; |
| |
| ret = addr_to_str(addr, buffer+1, SOCKET_INFO_MAX_LEN-1); |
| if (ret <= 0) { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| if (ret == AF_UNIX) { |
| lua_pushstring(L, buffer+1); |
| return 1; |
| } |
| else if (ret == AF_INET6) { |
| buffer[0] = '['; |
| len = strlen(buffer); |
| buffer[len] = ']'; |
| len++; |
| buffer[len] = ':'; |
| len++; |
| p = buffer; |
| } |
| else if (ret == AF_INET) { |
| p = buffer + 1; |
| len = strlen(p); |
| p[len] = ':'; |
| len++; |
| } |
| else { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| if (port_to_str(addr, p + len, SOCKET_INFO_MAX_LEN-1 - len) <= 0) { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| lua_pushstring(L, p); |
| return 1; |
| } |
| |
| /* Returns information about the peer of the connection. */ |
| __LJMP static int hlua_socket_getpeername(struct lua_State *L) |
| { |
| struct hlua_socket *socket; |
| struct connection *conn; |
| |
| MAY_LJMP(check_args(L, 1, "getpeername")); |
| |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| |
| /* Check if the tcp object is avalaible. */ |
| if (!socket->s) { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| conn = objt_conn(socket->s->si[1].end); |
| if (!conn) { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| if (!(conn->flags & CO_FL_ADDR_TO_SET)) { |
| unsigned int salen = sizeof(conn->addr.to); |
| if (getpeername(conn->t.sock.fd, (struct sockaddr *)&conn->addr.to, &salen) == -1) { |
| lua_pushnil(L); |
| return 1; |
| } |
| conn->flags |= CO_FL_ADDR_TO_SET; |
| } |
| |
| return MAY_LJMP(hlua_socket_info(L, &conn->addr.to)); |
| } |
| |
| /* Returns information about my connection side. */ |
| static int hlua_socket_getsockname(struct lua_State *L) |
| { |
| struct hlua_socket *socket; |
| struct connection *conn; |
| |
| MAY_LJMP(check_args(L, 1, "getsockname")); |
| |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| |
| /* Check if the tcp object is avalaible. */ |
| if (!socket->s) { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| conn = objt_conn(socket->s->si[1].end); |
| if (!conn) { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| if (!(conn->flags & CO_FL_ADDR_FROM_SET)) { |
| unsigned int salen = sizeof(conn->addr.from); |
| if (getsockname(conn->t.sock.fd, (struct sockaddr *)&conn->addr.from, &salen) == -1) { |
| lua_pushnil(L); |
| return 1; |
| } |
| conn->flags |= CO_FL_ADDR_FROM_SET; |
| } |
| |
| return hlua_socket_info(L, &conn->addr.from); |
| } |
| |
| /* This struct define the applet. */ |
| static struct applet update_applet = { |
| .obj_type = OBJ_TYPE_APPLET, |
| .name = "<LUA_TCP>", |
| .fct = hlua_socket_handler, |
| .release = hlua_socket_release, |
| }; |
| |
| __LJMP static int hlua_socket_connect_yield(struct lua_State *L, int status, lua_KContext ctx) |
| { |
| struct hlua_socket *socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| struct hlua *hlua = hlua_gethlua(L); |
| struct appctx *appctx; |
| |
| /* Check for connection close. */ |
| if (!hlua || !socket->s || channel_output_closed(&socket->s->req)) { |
| lua_pushnil(L); |
| lua_pushstring(L, "Can't connect"); |
| return 2; |
| } |
| |
| appctx = objt_appctx(socket->s->si[0].end); |
| |
| /* Check for connection established. */ |
| if (appctx->ctx.hlua.connected) { |
| lua_pushinteger(L, 1); |
| return 1; |
| } |
| |
| if (!hlua_com_new(hlua, &appctx->ctx.hlua.wake_on_write)) |
| WILL_LJMP(luaL_error(L, "out of memory error")); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_socket_connect_yield, TICK_ETERNITY, 0)); |
| return 0; |
| } |
| |
| /* This function fail or initite the connection. */ |
| __LJMP static int hlua_socket_connect(struct lua_State *L) |
| { |
| struct hlua_socket *socket; |
| int port = -1; |
| const char *ip; |
| struct connection *conn; |
| struct hlua *hlua; |
| struct appctx *appctx; |
| int low, high; |
| struct sockaddr_storage *addr; |
| |
| if (lua_gettop(L) < 2) |
| WILL_LJMP(luaL_error(L, "connect: need at least 2 arguments")); |
| |
| /* Get args. */ |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| ip = MAY_LJMP(luaL_checkstring(L, 2)); |
| if (lua_gettop(L) >= 3) |
| port = MAY_LJMP(luaL_checkinteger(L, 3)); |
| |
| conn = si_alloc_conn(&socket->s->si[1]); |
| if (!conn) |
| WILL_LJMP(luaL_error(L, "connect: internal error")); |
| |
| /* needed for the connection not to be closed */ |
| conn->target = socket->s->target; |
| |
| /* Parse ip address. */ |
| addr = str2sa_range(ip, &low, &high, NULL, NULL, NULL, 0); |
| if (!addr) |
| WILL_LJMP(luaL_error(L, "connect: cannot parse destination address '%s'", ip)); |
| if (low != high) |
| WILL_LJMP(luaL_error(L, "connect: port ranges not supported : address '%s'", ip)); |
| memcpy(&conn->addr.to, addr, sizeof(struct sockaddr_storage)); |
| |
| /* Set port. */ |
| if (low == 0) { |
| if (conn->addr.to.ss_family == AF_INET) { |
| if (port == -1) |
| WILL_LJMP(luaL_error(L, "connect: port missing")); |
| ((struct sockaddr_in *)&conn->addr.to)->sin_port = htons(port); |
| } else if (conn->addr.to.ss_family == AF_INET6) { |
| if (port == -1) |
| WILL_LJMP(luaL_error(L, "connect: port missing")); |
| ((struct sockaddr_in6 *)&conn->addr.to)->sin6_port = htons(port); |
| } |
| } |
| |
| hlua = hlua_gethlua(L); |
| appctx = objt_appctx(socket->s->si[0].end); |
| |
| /* inform the stream that we want to be notified whenever the |
| * connection completes. |
| */ |
| si_applet_cant_get(&socket->s->si[0]); |
| si_applet_cant_put(&socket->s->si[0]); |
| appctx_wakeup(appctx); |
| |
| hlua->flags |= HLUA_MUST_GC; |
| |
| if (!hlua_com_new(hlua, &appctx->ctx.hlua.wake_on_write)) |
| WILL_LJMP(luaL_error(L, "out of memory")); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_socket_connect_yield, TICK_ETERNITY, 0)); |
| |
| return 0; |
| } |
| |
| #ifdef USE_OPENSSL |
| __LJMP static int hlua_socket_connect_ssl(struct lua_State *L) |
| { |
| struct hlua_socket *socket; |
| |
| MAY_LJMP(check_args(L, 3, "connect_ssl")); |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| socket->s->target = &socket_ssl.obj_type; |
| return MAY_LJMP(hlua_socket_connect(L)); |
| } |
| #endif |
| |
| __LJMP static int hlua_socket_setoption(struct lua_State *L) |
| { |
| return 0; |
| } |
| |
| __LJMP static int hlua_socket_settimeout(struct lua_State *L) |
| { |
| struct hlua_socket *socket; |
| int tmout; |
| |
| MAY_LJMP(check_args(L, 2, "settimeout")); |
| |
| socket = MAY_LJMP(hlua_checksocket(L, 1)); |
| tmout = MAY_LJMP(luaL_checkinteger(L, 2)) * 1000; |
| |
| socket->s->req.rto = tmout; |
| socket->s->req.wto = tmout; |
| socket->s->res.rto = tmout; |
| socket->s->res.wto = tmout; |
| |
| return 0; |
| } |
| |
| __LJMP static int hlua_socket_new(lua_State *L) |
| { |
| struct hlua_socket *socket; |
| struct appctx *appctx; |
| struct session *sess; |
| struct stream *strm; |
| struct task *task; |
| |
| /* Check stack size. */ |
| if (!lua_checkstack(L, 3)) { |
| hlua_pusherror(L, "socket: full stack"); |
| goto out_fail_conf; |
| } |
| |
| /* Create the object: obj[0] = userdata. */ |
| lua_newtable(L); |
| socket = MAY_LJMP(lua_newuserdata(L, sizeof(*socket))); |
| lua_rawseti(L, -2, 0); |
| memset(socket, 0, sizeof(*socket)); |
| |
| /* Check if the various memory pools are intialized. */ |
| if (!pool2_stream || !pool2_buffer) { |
| hlua_pusherror(L, "socket: uninitialized pools."); |
| goto out_fail_conf; |
| } |
| |
| /* Pop a class stream metatable and affect it to the userdata. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_socket_ref); |
| lua_setmetatable(L, -2); |
| |
| /* Create the applet context */ |
| appctx = appctx_new(&update_applet); |
| if (!appctx) { |
| hlua_pusherror(L, "socket: out of memory"); |
| goto out_fail_conf; |
| } |
| |
| appctx->ctx.hlua.socket = socket; |
| appctx->ctx.hlua.connected = 0; |
| LIST_INIT(&appctx->ctx.hlua.wake_on_write); |
| LIST_INIT(&appctx->ctx.hlua.wake_on_read); |
| |
| /* Now create a session, task and stream for this applet */ |
| sess = session_new(&socket_proxy, NULL, &appctx->obj_type); |
| if (!sess) { |
| hlua_pusherror(L, "socket: out of memory"); |
| goto out_fail_sess; |
| } |
| |
| task = task_new(); |
| if (!task) { |
| hlua_pusherror(L, "socket: out of memory"); |
| goto out_fail_task; |
| } |
| task->nice = 0; |
| |
| strm = stream_new(sess, task, &appctx->obj_type); |
| if (!strm) { |
| hlua_pusherror(L, "socket: out of memory"); |
| goto out_fail_stream; |
| } |
| |
| /* Configure an empty Lua for the stream. */ |
| socket->s = strm; |
| strm->hlua.T = NULL; |
| strm->hlua.Tref = LUA_REFNIL; |
| strm->hlua.Mref = LUA_REFNIL; |
| strm->hlua.nargs = 0; |
| strm->hlua.flags = 0; |
| LIST_INIT(&strm->hlua.com); |
| |
| /* Configure "right" stream interface. this "si" is used to connect |
| * and retrieve data from the server. The connection is initialized |
| * with the "struct server". |
| */ |
| si_set_state(&strm->si[1], SI_ST_ASS); |
| |
| /* Force destination server. */ |
| strm->flags |= SF_DIRECT | SF_ASSIGNED | SF_ADDR_SET | SF_BE_ASSIGNED; |
| strm->target = &socket_tcp.obj_type; |
| |
| /* Update statistics counters. */ |
| socket_proxy.feconn++; /* beconn will be increased later */ |
| jobs++; |
| totalconn++; |
| |
| /* Return yield waiting for connection. */ |
| return 1; |
| |
| out_fail_stream: |
| task_free(task); |
| out_fail_task: |
| session_free(sess); |
| out_fail_sess: |
| appctx_free(appctx); |
| out_fail_conf: |
| WILL_LJMP(lua_error(L)); |
| return 0; |
| } |
| |
| /* |
| * |
| * |
| * Class Channel |
| * |
| * |
| */ |
| |
| /* The state between the channel data and the HTTP parser state can be |
| * unconsistent, so reset the parser and call it again. Warning, this |
| * action not revalidate the request and not send a 400 if the modified |
| * resuest is not valid. |
| * |
| * This function never fails. The direction is set using dir, which equals |
| * either SMP_OPT_DIR_REQ or SMP_OPT_DIR_RES. |
| */ |
| static void hlua_resynchonize_proto(struct stream *stream, int dir) |
| { |
| /* Protocol HTTP. */ |
| if (stream->be->mode == PR_MODE_HTTP) { |
| |
| if (dir == SMP_OPT_DIR_REQ) |
| http_txn_reset_req(stream->txn); |
| else if (dir == SMP_OPT_DIR_RES) |
| http_txn_reset_res(stream->txn); |
| |
| if (stream->txn->hdr_idx.v) |
| hdr_idx_init(&stream->txn->hdr_idx); |
| |
| if (dir == SMP_OPT_DIR_REQ) |
| http_msg_analyzer(&stream->txn->req, &stream->txn->hdr_idx); |
| else if (dir == SMP_OPT_DIR_RES) |
| http_msg_analyzer(&stream->txn->rsp, &stream->txn->hdr_idx); |
| } |
| } |
| |
| /* Check the protocole integrity after the Lua manipulations. Close the stream |
| * and returns 0 if fails, otherwise returns 1. The direction is set using dir, |
| * which equals either SMP_OPT_DIR_REQ or SMP_OPT_DIR_RES. |
| */ |
| static int hlua_check_proto(struct stream *stream, int dir) |
| { |
| const struct chunk msg = { .len = 0 }; |
| |
| /* Protocol HTTP. The message parsing state must match the request or |
| * response state. The problem that may happen is that Lua modifies |
| * the request or response message *after* it was parsed, and corrupted |
| * it so that it could not be processed anymore. We just need to verify |
| * if the parser is still expected to run or not. |
| */ |
| if (stream->be->mode == PR_MODE_HTTP) { |
| if (dir == SMP_OPT_DIR_REQ && |
| !(stream->req.analysers & AN_REQ_WAIT_HTTP) && |
| stream->txn->req.msg_state < HTTP_MSG_BODY) { |
| stream_int_retnclose(&stream->si[0], &msg); |
| return 0; |
| } |
| else if (dir == SMP_OPT_DIR_RES && |
| !(stream->res.analysers & AN_RES_WAIT_HTTP) && |
| stream->txn->rsp.msg_state < HTTP_MSG_BODY) { |
| stream_int_retnclose(&stream->si[0], &msg); |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| /* Returns the struct hlua_channel join to the class channel in the |
| * stack entry "ud" or throws an argument error. |
| */ |
| __LJMP static struct channel *hlua_checkchannel(lua_State *L, int ud) |
| { |
| return (struct channel *)MAY_LJMP(hlua_checkudata(L, ud, class_channel_ref)); |
| } |
| |
| /* Pushes the channel onto the top of the stack. If the stask does not have a |
| * free slots, the function fails and returns 0; |
| */ |
| static int hlua_channel_new(lua_State *L, struct channel *channel) |
| { |
| /* Check stack size. */ |
| if (!lua_checkstack(L, 3)) |
| return 0; |
| |
| lua_newtable(L); |
| lua_pushlightuserdata(L, channel); |
| lua_rawseti(L, -2, 0); |
| |
| /* Pop a class sesison metatable and affect it to the userdata. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_channel_ref); |
| lua_setmetatable(L, -2); |
| return 1; |
| } |
| |
| /* Duplicate all the data present in the input channel and put it |
| * in a string LUA variables. Returns -1 and push a nil value in |
| * the stack if the channel is closed and all the data are consumed, |
| * returns 0 if no data are available, otherwise it returns the length |
| * of the builded string. |
| */ |
| static inline int _hlua_channel_dup(struct channel *chn, lua_State *L) |
| { |
| char *blk1; |
| char *blk2; |
| int len1; |
| int len2; |
| int ret; |
| luaL_Buffer b; |
| |
| ret = bi_getblk_nc(chn, &blk1, &len1, &blk2, &len2); |
| if (unlikely(ret == 0)) |
| return 0; |
| |
| if (unlikely(ret < 0)) { |
| lua_pushnil(L); |
| return -1; |
| } |
| |
| luaL_buffinit(L, &b); |
| luaL_addlstring(&b, blk1, len1); |
| if (unlikely(ret == 2)) |
| luaL_addlstring(&b, blk2, len2); |
| luaL_pushresult(&b); |
| |
| if (unlikely(ret == 2)) |
| return len1 + len2; |
| return len1; |
| } |
| |
| /* "_hlua_channel_dup" wrapper. If no data are available, it returns |
| * a yield. This function keep the data in the buffer. |
| */ |
| __LJMP static int hlua_channel_dup_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct channel *chn; |
| |
| chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| |
| if (_hlua_channel_dup(chn, L) == 0) |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_channel_dup_yield, TICK_ETERNITY, 0)); |
| return 1; |
| } |
| |
| /* Check arguments for the function "hlua_channel_dup_yield". */ |
| __LJMP static int hlua_channel_dup(lua_State *L) |
| { |
| MAY_LJMP(check_args(L, 1, "dup")); |
| MAY_LJMP(hlua_checkchannel(L, 1)); |
| return MAY_LJMP(hlua_channel_dup_yield(L, 0, 0)); |
| } |
| |
| /* "_hlua_channel_dup" wrapper. If no data are available, it returns |
| * a yield. This function consumes the data in the buffer. It returns |
| * a string containing the data or a nil pointer if no data are available |
| * and the channel is closed. |
| */ |
| __LJMP static int hlua_channel_get_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct channel *chn; |
| int ret; |
| |
| chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| |
| ret = _hlua_channel_dup(chn, L); |
| if (unlikely(ret == 0)) |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_channel_get_yield, TICK_ETERNITY, 0)); |
| |
| if (unlikely(ret == -1)) |
| return 1; |
| |
| chn->buf->i -= ret; |
| hlua_resynchonize_proto(chn_strm(chn), !!(chn->flags & CF_ISRESP)); |
| return 1; |
| } |
| |
| /* Check arguments for the fucntion "hlua_channel_get_yield". */ |
| __LJMP static int hlua_channel_get(lua_State *L) |
| { |
| MAY_LJMP(check_args(L, 1, "get")); |
| MAY_LJMP(hlua_checkchannel(L, 1)); |
| return MAY_LJMP(hlua_channel_get_yield(L, 0, 0)); |
| } |
| |
| /* This functions consumes and returns one line. If the channel is closed, |
| * and the last data does not contains a final '\n', the data are returned |
| * without the final '\n'. When no more data are avalaible, it returns nil |
| * value. |
| */ |
| __LJMP static int hlua_channel_getline_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| char *blk1; |
| char *blk2; |
| int len1; |
| int len2; |
| int len; |
| struct channel *chn; |
| int ret; |
| luaL_Buffer b; |
| |
| chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| |
| ret = bi_getline_nc(chn, &blk1, &len1, &blk2, &len2); |
| if (ret == 0) |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_channel_getline_yield, TICK_ETERNITY, 0)); |
| |
| if (ret == -1) { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| luaL_buffinit(L, &b); |
| luaL_addlstring(&b, blk1, len1); |
| len = len1; |
| if (unlikely(ret == 2)) { |
| luaL_addlstring(&b, blk2, len2); |
| len += len2; |
| } |
| luaL_pushresult(&b); |
| buffer_replace2(chn->buf, chn->buf->p, chn->buf->p + len, NULL, 0); |
| hlua_resynchonize_proto(chn_strm(chn), !!(chn->flags & CF_ISRESP)); |
| return 1; |
| } |
| |
| /* Check arguments for the fucntion "hlua_channel_getline_yield". */ |
| __LJMP static int hlua_channel_getline(lua_State *L) |
| { |
| MAY_LJMP(check_args(L, 1, "getline")); |
| MAY_LJMP(hlua_checkchannel(L, 1)); |
| return MAY_LJMP(hlua_channel_getline_yield(L, 0, 0)); |
| } |
| |
| /* This function takes a string as input, and append it at the |
| * input side of channel. If the data is too big, but a space |
| * is probably available after sending some data, the function |
| * yield. If the data is bigger than the buffer, or if the |
| * channel is closed, it returns -1. otherwise, it returns the |
| * amount of data writed. |
| */ |
| __LJMP static int hlua_channel_append_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct channel *chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| size_t len; |
| const char *str = MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| int l = MAY_LJMP(luaL_checkinteger(L, 3)); |
| int ret; |
| int max; |
| |
| max = channel_recv_limit(chn) - buffer_len(chn->buf); |
| if (max > len - l) |
| max = len - l; |
| |
| ret = bi_putblk(chn, str + l, max); |
| if (ret == -2 || ret == -3) { |
| lua_pushinteger(L, -1); |
| return 1; |
| } |
| if (ret == -1) { |
| chn->flags |= CF_WAKE_WRITE; |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_channel_append_yield, TICK_ETERNITY, 0)); |
| } |
| l += ret; |
| lua_pop(L, 1); |
| lua_pushinteger(L, l); |
| hlua_resynchonize_proto(chn_strm(chn), !!(chn->flags & CF_ISRESP)); |
| |
| max = channel_recv_limit(chn) - buffer_len(chn->buf); |
| if (max == 0 && chn->buf->o == 0) { |
| /* There are no space avalaible, and the output buffer is empty. |
| * in this case, we cannot add more data, so we cannot yield, |
| * we return the amount of copyied data. |
| */ |
| return 1; |
| } |
| if (l < len) |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_channel_append_yield, TICK_ETERNITY, 0)); |
| return 1; |
| } |
| |
| /* just a wrapper of "hlua_channel_append_yield". It returns the length |
| * of the writed string, or -1 if the channel is closed or if the |
| * buffer size is too little for the data. |
| */ |
| __LJMP static int hlua_channel_append(lua_State *L) |
| { |
| size_t len; |
| |
| MAY_LJMP(check_args(L, 2, "append")); |
| MAY_LJMP(hlua_checkchannel(L, 1)); |
| MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| MAY_LJMP(luaL_checkinteger(L, 3)); |
| lua_pushinteger(L, 0); |
| |
| return MAY_LJMP(hlua_channel_append_yield(L, 0, 0)); |
| } |
| |
| /* just a wrapper of "hlua_channel_append_yield". This wrapper starts |
| * his process by cleaning the buffer. The result is a replacement |
| * of the current data. It returns the length of the writed string, |
| * or -1 if the channel is closed or if the buffer size is too |
| * little for the data. |
| */ |
| __LJMP static int hlua_channel_set(lua_State *L) |
| { |
| struct channel *chn; |
| |
| MAY_LJMP(check_args(L, 2, "set")); |
| chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| lua_pushinteger(L, 0); |
| |
| chn->buf->i = 0; |
| |
| return MAY_LJMP(hlua_channel_append_yield(L, 0, 0)); |
| } |
| |
| /* Append data in the output side of the buffer. This data is immediatly |
| * sent. The fcuntion returns the ammount of data writed. If the buffer |
| * cannot contains the data, the function yield. The function returns -1 |
| * if the channel is closed. |
| */ |
| __LJMP static int hlua_channel_send_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct channel *chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| size_t len; |
| const char *str = MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| int l = MAY_LJMP(luaL_checkinteger(L, 3)); |
| int max; |
| struct hlua *hlua = hlua_gethlua(L); |
| |
| if (unlikely(channel_output_closed(chn))) { |
| lua_pushinteger(L, -1); |
| return 1; |
| } |
| |
| /* Check if the buffer is avalaible because HAProxy doesn't allocate |
| * the request buffer if its not required. |
| */ |
| if (chn->buf->size == 0) { |
| if (!stream_alloc_recv_buffer(chn)) { |
| chn_prod(chn)->flags |= SI_FL_WAIT_ROOM; |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_channel_send_yield, TICK_ETERNITY, 0)); |
| } |
| } |
| |
| /* the writed data will be immediatly sent, so we can check |
| * the avalaible space without taking in account the reserve. |
| * The reserve is guaranted for the processing of incoming |
| * data, because the buffer will be flushed. |
| */ |
| max = chn->buf->size - buffer_len(chn->buf); |
| |
| /* If there are no space avalaible, and the output buffer is empty. |
| * in this case, we cannot add more data, so we cannot yield, |
| * we return the amount of copyied data. |
| */ |
| if (max == 0 && chn->buf->o == 0) |
| return 1; |
| |
| /* Adjust the real required length. */ |
| if (max > len - l) |
| max = len - l; |
| |
| /* The buffer avalaible size may be not contiguous. This test |
| * detects a non contiguous buffer and realign it. |
| */ |
| if (bi_space_for_replace(chn->buf) < max) |
| buffer_slow_realign(chn->buf); |
| |
| /* Copy input data in the buffer. */ |
| max = buffer_replace2(chn->buf, chn->buf->p, chn->buf->p, str + l, max); |
| |
| /* buffer replace considers that the input part is filled. |
| * so, I must forward these new data in the output part. |
| */ |
| b_adv(chn->buf, max); |
| |
| l += max; |
| lua_pop(L, 1); |
| lua_pushinteger(L, l); |
| |
| /* If there are no space avalaible, and the output buffer is empty. |
| * in this case, we cannot add more data, so we cannot yield, |
| * we return the amount of copyied data. |
| */ |
| max = chn->buf->size - buffer_len(chn->buf); |
| if (max == 0 && chn->buf->o == 0) |
| return 1; |
| |
| if (l < len) { |
| /* If we are waiting for space in the response buffer, we |
| * must set the flag WAKERESWR. This flag required the task |
| * wake up if any activity is detected on the response buffer. |
| */ |
| if (chn->flags & CF_ISRESP) |
| HLUA_SET_WAKERESWR(hlua); |
| else |
| HLUA_SET_WAKEREQWR(hlua); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_channel_send_yield, TICK_ETERNITY, 0)); |
| } |
| |
| return 1; |
| } |
| |
| /* Just a wraper of "_hlua_channel_send". This wrapper permits |
| * yield the LUA process, and resume it without checking the |
| * input arguments. |
| */ |
| __LJMP static int hlua_channel_send(lua_State *L) |
| { |
| MAY_LJMP(check_args(L, 2, "send")); |
| lua_pushinteger(L, 0); |
| |
| return MAY_LJMP(hlua_channel_send_yield(L, 0, 0)); |
| } |
| |
| /* This function forward and amount of butes. The data pass from |
| * the input side of the buffer to the output side, and can be |
| * forwarded. This function never fails. |
| * |
| * The Lua function takes an amount of bytes to be forwarded in |
| * imput. It returns the number of bytes forwarded. |
| */ |
| __LJMP static int hlua_channel_forward_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct channel *chn; |
| int len; |
| int l; |
| int max; |
| struct hlua *hlua = hlua_gethlua(L); |
| |
| chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| len = MAY_LJMP(luaL_checkinteger(L, 2)); |
| l = MAY_LJMP(luaL_checkinteger(L, -1)); |
| |
| max = len - l; |
| if (max > chn->buf->i) |
| max = chn->buf->i; |
| channel_forward(chn, max); |
| l += max; |
| |
| lua_pop(L, 1); |
| lua_pushinteger(L, l); |
| |
| /* Check if it miss bytes to forward. */ |
| if (l < len) { |
| /* The the input channel or the output channel are closed, we |
| * must return the amount of data forwarded. |
| */ |
| if (channel_input_closed(chn) || channel_output_closed(chn)) |
| return 1; |
| |
| /* If we are waiting for space data in the response buffer, we |
| * must set the flag WAKERESWR. This flag required the task |
| * wake up if any activity is detected on the response buffer. |
| */ |
| if (chn->flags & CF_ISRESP) |
| HLUA_SET_WAKERESWR(hlua); |
| else |
| HLUA_SET_WAKEREQWR(hlua); |
| |
| /* Otherwise, we can yield waiting for new data in the inpout side. */ |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_channel_forward_yield, TICK_ETERNITY, 0)); |
| } |
| |
| return 1; |
| } |
| |
| /* Just check the input and prepare the stack for the previous |
| * function "hlua_channel_forward_yield" |
| */ |
| __LJMP static int hlua_channel_forward(lua_State *L) |
| { |
| MAY_LJMP(check_args(L, 2, "forward")); |
| MAY_LJMP(hlua_checkchannel(L, 1)); |
| MAY_LJMP(luaL_checkinteger(L, 2)); |
| |
| lua_pushinteger(L, 0); |
| return MAY_LJMP(hlua_channel_forward_yield(L, 0, 0)); |
| } |
| |
| /* Just returns the number of bytes available in the input |
| * side of the buffer. This function never fails. |
| */ |
| __LJMP static int hlua_channel_get_in_len(lua_State *L) |
| { |
| struct channel *chn; |
| |
| MAY_LJMP(check_args(L, 1, "get_in_len")); |
| chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| lua_pushinteger(L, chn->buf->i); |
| return 1; |
| } |
| |
| /* Just returns the number of bytes available in the output |
| * side of the buffer. This function never fails. |
| */ |
| __LJMP static int hlua_channel_get_out_len(lua_State *L) |
| { |
| struct channel *chn; |
| |
| MAY_LJMP(check_args(L, 1, "get_out_len")); |
| chn = MAY_LJMP(hlua_checkchannel(L, 1)); |
| lua_pushinteger(L, chn->buf->o); |
| return 1; |
| } |
| |
| /* |
| * |
| * |
| * Class Fetches |
| * |
| * |
| */ |
| |
| /* Returns a struct hlua_session if the stack entry "ud" is |
| * a class stream, otherwise it throws an error. |
| */ |
| __LJMP static struct hlua_smp *hlua_checkfetches(lua_State *L, int ud) |
| { |
| return (struct hlua_smp *)MAY_LJMP(hlua_checkudata(L, ud, class_fetches_ref)); |
| } |
| |
| /* This function creates and push in the stack a fetch object according |
| * with a current TXN. |
| */ |
| static int hlua_fetches_new(lua_State *L, struct hlua_txn *txn, unsigned int flags) |
| { |
| struct hlua_smp *hsmp; |
| |
| /* Check stack size. */ |
| if (!lua_checkstack(L, 3)) |
| return 0; |
| |
| /* Create the object: obj[0] = userdata. |
| * Note that the base of the Fetches object is the |
| * transaction object. |
| */ |
| lua_newtable(L); |
| hsmp = lua_newuserdata(L, sizeof(*hsmp)); |
| lua_rawseti(L, -2, 0); |
| |
| hsmp->s = txn->s; |
| hsmp->p = txn->p; |
| hsmp->dir = txn->dir; |
| hsmp->flags = flags; |
| |
| /* Pop a class sesison metatable and affect it to the userdata. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_fetches_ref); |
| lua_setmetatable(L, -2); |
| |
| return 1; |
| } |
| |
| /* This function is an LUA binding. It is called with each sample-fetch. |
| * It uses closure argument to store the associated sample-fetch. It |
| * returns only one argument or throws an error. An error is thrown |
| * only if an error is encountered during the argument parsing. If |
| * the "sample-fetch" function fails, nil is returned. |
| */ |
| __LJMP static int hlua_run_sample_fetch(lua_State *L) |
| { |
| struct hlua_smp *hsmp; |
| struct sample_fetch *f; |
| struct arg args[ARGM_NBARGS + 1]; |
| int i; |
| struct sample smp; |
| |
| /* Get closure arguments. */ |
| f = (struct sample_fetch *)lua_touserdata(L, lua_upvalueindex(1)); |
| |
| /* Get traditionnal arguments. */ |
| hsmp = MAY_LJMP(hlua_checkfetches(L, 1)); |
| |
| /* Check execution authorization. */ |
| if (f->use & SMP_USE_HTTP_ANY && |
| !(hsmp->flags & HLUA_F_MAY_USE_HTTP)) { |
| lua_pushfstring(L, "the sample-fetch '%s' needs an HTTP parser which " |
| "is not available in Lua services", f->kw); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Get extra arguments. */ |
| for (i = 0; i < lua_gettop(L) - 1; i++) { |
| if (i >= ARGM_NBARGS) |
| break; |
| hlua_lua2arg(L, i + 2, &args[i]); |
| } |
| args[i].type = ARGT_STOP; |
| |
| /* Check arguments. */ |
| MAY_LJMP(hlua_lua2arg_check(L, 2, args, f->arg_mask, hsmp->p)); |
| |
| /* Run the special args checker. */ |
| if (f->val_args && !f->val_args(args, NULL)) { |
| lua_pushfstring(L, "error in arguments"); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Initialise the sample. */ |
| memset(&smp, 0, sizeof(smp)); |
| |
| /* Run the sample fetch process. */ |
| smp.px = hsmp->p; |
| smp.sess = hsmp->s->sess; |
| smp.strm = hsmp->s; |
| smp.opt = hsmp->dir & SMP_OPT_DIR; |
| if (!f->process(args, &smp, f->kw, f->private)) { |
| if (hsmp->flags & HLUA_F_AS_STRING) |
| lua_pushstring(L, ""); |
| else |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| /* Convert the returned sample in lua value. */ |
| if (hsmp->flags & HLUA_F_AS_STRING) |
| hlua_smp2lua_str(L, &smp); |
| else |
| hlua_smp2lua(L, &smp); |
| return 1; |
| } |
| |
| /* |
| * |
| * |
| * Class Converters |
| * |
| * |
| */ |
| |
| /* Returns a struct hlua_session if the stack entry "ud" is |
| * a class stream, otherwise it throws an error. |
| */ |
| __LJMP static struct hlua_smp *hlua_checkconverters(lua_State *L, int ud) |
| { |
| return (struct hlua_smp *)MAY_LJMP(hlua_checkudata(L, ud, class_converters_ref)); |
| } |
| |
| /* This function creates and push in the stack a Converters object |
| * according with a current TXN. |
| */ |
| static int hlua_converters_new(lua_State *L, struct hlua_txn *txn, unsigned int flags) |
| { |
| struct hlua_smp *hsmp; |
| |
| /* Check stack size. */ |
| if (!lua_checkstack(L, 3)) |
| return 0; |
| |
| /* Create the object: obj[0] = userdata. |
| * Note that the base of the Converters object is the |
| * same than the TXN object. |
| */ |
| lua_newtable(L); |
| hsmp = lua_newuserdata(L, sizeof(*hsmp)); |
| lua_rawseti(L, -2, 0); |
| |
| hsmp->s = txn->s; |
| hsmp->p = txn->p; |
| hsmp->dir = txn->dir; |
| hsmp->flags = flags; |
| |
| /* Pop a class stream metatable and affect it to the table. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_converters_ref); |
| lua_setmetatable(L, -2); |
| |
| return 1; |
| } |
| |
| /* This function is an LUA binding. It is called with each converter. |
| * It uses closure argument to store the associated converter. It |
| * returns only one argument or throws an error. An error is thrown |
| * only if an error is encountered during the argument parsing. If |
| * the converter function function fails, nil is returned. |
| */ |
| __LJMP static int hlua_run_sample_conv(lua_State *L) |
| { |
| struct hlua_smp *hsmp; |
| struct sample_conv *conv; |
| struct arg args[ARGM_NBARGS + 1]; |
| int i; |
| struct sample smp; |
| |
| /* Get closure arguments. */ |
| conv = (struct sample_conv *)lua_touserdata(L, lua_upvalueindex(1)); |
| |
| /* Get traditionnal arguments. */ |
| hsmp = MAY_LJMP(hlua_checkconverters(L, 1)); |
| |
| /* Get extra arguments. */ |
| for (i = 0; i < lua_gettop(L) - 2; i++) { |
| if (i >= ARGM_NBARGS) |
| break; |
| hlua_lua2arg(L, i + 3, &args[i]); |
| } |
| args[i].type = ARGT_STOP; |
| |
| /* Check arguments. */ |
| MAY_LJMP(hlua_lua2arg_check(L, 3, args, conv->arg_mask, hsmp->p)); |
| |
| /* Run the special args checker. */ |
| if (conv->val_args && !conv->val_args(args, conv, "", 0, NULL)) { |
| hlua_pusherror(L, "error in arguments"); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Initialise the sample. */ |
| if (!hlua_lua2smp(L, 2, &smp)) { |
| hlua_pusherror(L, "error in the input argument"); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Apply expected cast. */ |
| if (!sample_casts[smp.data.type][conv->in_type]) { |
| hlua_pusherror(L, "invalid input argument: cannot cast '%s' to '%s'", |
| smp_to_type[smp.data.type], smp_to_type[conv->in_type]); |
| WILL_LJMP(lua_error(L)); |
| } |
| if (sample_casts[smp.data.type][conv->in_type] != c_none && |
| !sample_casts[smp.data.type][conv->in_type](&smp)) { |
| hlua_pusherror(L, "error during the input argument casting"); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Run the sample conversion process. */ |
| smp.px = hsmp->p; |
| smp.sess = hsmp->s->sess; |
| smp.strm = hsmp->s; |
| smp.opt = hsmp->dir & SMP_OPT_DIR; |
| if (!conv->process(args, &smp, conv->private)) { |
| if (hsmp->flags & HLUA_F_AS_STRING) |
| lua_pushstring(L, ""); |
| else |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| /* Convert the returned sample in lua value. */ |
| if (hsmp->flags & HLUA_F_AS_STRING) |
| hlua_smp2lua_str(L, &smp); |
| else |
| hlua_smp2lua(L, &smp); |
| return 1; |
| } |
| |
| /* |
| * |
| * |
| * Class AppletTCP |
| * |
| * |
| */ |
| |
| /* Returns a struct hlua_txn if the stack entry "ud" is |
| * a class stream, otherwise it throws an error. |
| */ |
| __LJMP static struct hlua_appctx *hlua_checkapplet_tcp(lua_State *L, int ud) |
| { |
| return (struct hlua_appctx *)MAY_LJMP(hlua_checkudata(L, ud, class_applet_tcp_ref)); |
| } |
| |
| /* This function creates and push in the stack an Applet object |
| * according with a current TXN. |
| */ |
| static int hlua_applet_tcp_new(lua_State *L, struct appctx *ctx) |
| { |
| struct hlua_appctx *appctx; |
| struct stream_interface *si = ctx->owner; |
| struct stream *s = si_strm(si); |
| struct proxy *p = s->be; |
| |
| /* Check stack size. */ |
| if (!lua_checkstack(L, 3)) |
| return 0; |
| |
| /* Create the object: obj[0] = userdata. |
| * Note that the base of the Converters object is the |
| * same than the TXN object. |
| */ |
| lua_newtable(L); |
| appctx = lua_newuserdata(L, sizeof(*appctx)); |
| lua_rawseti(L, -2, 0); |
| appctx->appctx = ctx; |
| appctx->htxn.s = s; |
| appctx->htxn.p = p; |
| |
| /* Create the "f" field that contains a list of fetches. */ |
| lua_pushstring(L, "f"); |
| if (!hlua_fetches_new(L, &appctx->htxn, 0)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Create the "sf" field that contains a list of stringsafe fetches. */ |
| lua_pushstring(L, "sf"); |
| if (!hlua_fetches_new(L, &appctx->htxn, HLUA_F_AS_STRING)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Create the "c" field that contains a list of converters. */ |
| lua_pushstring(L, "c"); |
| if (!hlua_converters_new(L, &appctx->htxn, 0)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Create the "sc" field that contains a list of stringsafe converters. */ |
| lua_pushstring(L, "sc"); |
| if (!hlua_converters_new(L, &appctx->htxn, HLUA_F_AS_STRING)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Pop a class stream metatable and affect it to the table. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_applet_tcp_ref); |
| lua_setmetatable(L, -2); |
| |
| return 1; |
| } |
| |
| /* If expected data not yet available, it returns a yield. This function |
| * consumes the data in the buffer. It returns a string containing the |
| * data. This string can be empty. |
| */ |
| __LJMP static int hlua_applet_tcp_getline_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_tcp(L, 1)); |
| struct stream_interface *si = appctx->appctx->owner; |
| int ret; |
| char *blk1; |
| int len1; |
| char *blk2; |
| int len2; |
| |
| /* Read the maximum amount of data avalaible. */ |
| ret = bo_getline_nc(si_oc(si), &blk1, &len1, &blk2, &len2); |
| |
| /* Data not yet avalaible. return yield. */ |
| if (ret == 0) { |
| si_applet_cant_get(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_tcp_getline_yield, TICK_ETERNITY, 0)); |
| } |
| |
| /* End of data: commit the total strings and return. */ |
| if (ret < 0) { |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* Ensure that the block 2 length is usable. */ |
| if (ret == 1) |
| len2 = 0; |
| |
| /* dont check the max length read and dont check. */ |
| luaL_addlstring(&appctx->b, blk1, len1); |
| luaL_addlstring(&appctx->b, blk2, len2); |
| |
| /* Consume input channel output buffer data. */ |
| bo_skip(si_oc(si), len1 + len2); |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* Check arguments for the fucntion "hlua_channel_get_yield". */ |
| __LJMP static int hlua_applet_tcp_getline(lua_State *L) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_tcp(L, 1)); |
| |
| /* Initialise the string catenation. */ |
| luaL_buffinit(L, &appctx->b); |
| |
| return MAY_LJMP(hlua_applet_tcp_getline_yield(L, 0, 0)); |
| } |
| |
| /* If expected data not yet available, it returns a yield. This function |
| * consumes the data in the buffer. It returns a string containing the |
| * data. This string can be empty. |
| */ |
| __LJMP static int hlua_applet_tcp_recv_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_tcp(L, 1)); |
| struct stream_interface *si = appctx->appctx->owner; |
| int len = MAY_LJMP(luaL_checkinteger(L, 2)); |
| int ret; |
| char *blk1; |
| int len1; |
| char *blk2; |
| int len2; |
| |
| /* Read the maximum amount of data avalaible. */ |
| ret = bo_getblk_nc(si_oc(si), &blk1, &len1, &blk2, &len2); |
| |
| /* Data not yet avalaible. return yield. */ |
| if (ret == 0) { |
| si_applet_cant_get(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_tcp_recv_yield, TICK_ETERNITY, 0)); |
| } |
| |
| /* End of data: commit the total strings and return. */ |
| if (ret < 0) { |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* Ensure that the block 2 length is usable. */ |
| if (ret == 1) |
| len2 = 0; |
| |
| if (len == -1) { |
| |
| /* If len == -1, catenate all the data avalaile and |
| * yield because we want to get all the data until |
| * the end of data stream. |
| */ |
| luaL_addlstring(&appctx->b, blk1, len1); |
| luaL_addlstring(&appctx->b, blk2, len2); |
| bo_skip(si_oc(si), len1 + len2); |
| si_applet_cant_get(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_tcp_recv_yield, TICK_ETERNITY, 0)); |
| |
| } else { |
| |
| /* Copy the fisrt block caping to the length required. */ |
| if (len1 > len) |
| len1 = len; |
| luaL_addlstring(&appctx->b, blk1, len1); |
| len -= len1; |
| |
| /* Copy the second block. */ |
| if (len2 > len) |
| len2 = len; |
| luaL_addlstring(&appctx->b, blk2, len2); |
| len -= len2; |
| |
| /* Consume input channel output buffer data. */ |
| bo_skip(si_oc(si), len1 + len2); |
| |
| /* If we are no other data avalaible, yield waiting for new data. */ |
| if (len > 0) { |
| lua_pushinteger(L, len); |
| lua_replace(L, 2); |
| si_applet_cant_get(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_tcp_recv_yield, TICK_ETERNITY, 0)); |
| } |
| |
| /* return the result. */ |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* we never executes this */ |
| hlua_pusherror(L, "Lua: internal error"); |
| WILL_LJMP(lua_error(L)); |
| return 0; |
| } |
| |
| /* Check arguments for the fucntion "hlua_channel_get_yield". */ |
| __LJMP static int hlua_applet_tcp_recv(lua_State *L) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_tcp(L, 1)); |
| int len = -1; |
| |
| if (lua_gettop(L) > 2) |
| WILL_LJMP(luaL_error(L, "The 'recv' function requires between 1 and 2 arguments.")); |
| if (lua_gettop(L) >= 2) { |
| len = MAY_LJMP(luaL_checkinteger(L, 2)); |
| lua_pop(L, 1); |
| } |
| |
| /* Confirm or set the required length */ |
| lua_pushinteger(L, len); |
| |
| /* Initialise the string catenation. */ |
| luaL_buffinit(L, &appctx->b); |
| |
| return MAY_LJMP(hlua_applet_tcp_recv_yield(L, 0, 0)); |
| } |
| |
| /* Append data in the output side of the buffer. This data is immediatly |
| * sent. The fcuntion returns the ammount of data writed. If the buffer |
| * cannot contains the data, the function yield. The function returns -1 |
| * if the channel is closed. |
| */ |
| __LJMP static int hlua_applet_tcp_send_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| size_t len; |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_tcp(L, 1)); |
| const char *str = MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| int l = MAY_LJMP(luaL_checkinteger(L, 3)); |
| struct stream_interface *si = appctx->appctx->owner; |
| struct channel *chn = si_ic(si); |
| int max; |
| |
| /* Get the max amount of data which can write as input in the channel. */ |
| max = channel_recv_max(chn); |
| if (max > (len - l)) |
| max = len - l; |
| |
| /* Copy data. */ |
| bi_putblk(chn, str + l, max); |
| |
| /* update counters. */ |
| l += max; |
| lua_pop(L, 1); |
| lua_pushinteger(L, l); |
| |
| /* If some data is not send, declares the situation to the |
| * applet, and returns a yield. |
| */ |
| if (l < len) { |
| si_applet_cant_put(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_tcp_send_yield, TICK_ETERNITY, 0)); |
| } |
| |
| return 1; |
| } |
| |
| /* Just a wraper of "hlua_applet_tcp_send_yield". This wrapper permits |
| * yield the LUA process, and resume it without checking the |
| * input arguments. |
| */ |
| __LJMP static int hlua_applet_tcp_send(lua_State *L) |
| { |
| MAY_LJMP(check_args(L, 2, "send")); |
| lua_pushinteger(L, 0); |
| |
| return MAY_LJMP(hlua_applet_tcp_send_yield(L, 0, 0)); |
| } |
| |
| /* |
| * |
| * |
| * Class AppletHTTP |
| * |
| * |
| */ |
| |
| /* Returns a struct hlua_txn if the stack entry "ud" is |
| * a class stream, otherwise it throws an error. |
| */ |
| __LJMP static struct hlua_appctx *hlua_checkapplet_http(lua_State *L, int ud) |
| { |
| return (struct hlua_appctx *)MAY_LJMP(hlua_checkudata(L, ud, class_applet_http_ref)); |
| } |
| |
| /* This function creates and push in the stack an Applet object |
| * according with a current TXN. |
| */ |
| static int hlua_applet_http_new(lua_State *L, struct appctx *ctx) |
| { |
| struct hlua_appctx *appctx; |
| struct hlua_txn htxn; |
| struct stream_interface *si = ctx->owner; |
| struct stream *s = si_strm(si); |
| struct proxy *px = s->be; |
| struct http_txn *txn = s->txn; |
| const char *path; |
| const char *end; |
| const char *p; |
| |
| /* Check stack size. */ |
| if (!lua_checkstack(L, 3)) |
| return 0; |
| |
| /* Create the object: obj[0] = userdata. |
| * Note that the base of the Converters object is the |
| * same than the TXN object. |
| */ |
| lua_newtable(L); |
| appctx = lua_newuserdata(L, sizeof(*appctx)); |
| lua_rawseti(L, -2, 0); |
| appctx->appctx = ctx; |
| appctx->appctx->ctx.hlua_apphttp.status = 200; /* Default status code returned. */ |
| appctx->htxn.s = s; |
| appctx->htxn.p = px; |
| |
| /* Create the "f" field that contains a list of fetches. */ |
| lua_pushstring(L, "f"); |
| if (!hlua_fetches_new(L, &appctx->htxn, 0)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Create the "sf" field that contains a list of stringsafe fetches. */ |
| lua_pushstring(L, "sf"); |
| if (!hlua_fetches_new(L, &appctx->htxn, HLUA_F_AS_STRING)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Create the "c" field that contains a list of converters. */ |
| lua_pushstring(L, "c"); |
| if (!hlua_converters_new(L, &appctx->htxn, 0)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Create the "sc" field that contains a list of stringsafe converters. */ |
| lua_pushstring(L, "sc"); |
| if (!hlua_converters_new(L, &appctx->htxn, HLUA_F_AS_STRING)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Stores the request method. */ |
| lua_pushstring(L, "method"); |
| lua_pushlstring(L, txn->req.chn->buf->p, txn->req.sl.rq.m_l); |
| lua_settable(L, -3); |
| |
| /* Stores the http version. */ |
| lua_pushstring(L, "version"); |
| lua_pushlstring(L, txn->req.chn->buf->p + txn->req.sl.rq.v, txn->req.sl.rq.v_l); |
| lua_settable(L, -3); |
| |
| /* creates an array of headers. hlua_http_get_headers() crates and push |
| * the array on the top of the stack. |
| */ |
| lua_pushstring(L, "headers"); |
| htxn.s = s; |
| htxn.p = px; |
| htxn.dir = SMP_OPT_DIR_REQ; |
| if (!hlua_http_get_headers(L, &htxn, &htxn.s->txn->req)) |
| return 0; |
| lua_settable(L, -3); |
| |
| /* Get path and qs */ |
| path = http_get_path(txn); |
| end = txn->req.chn->buf->p + txn->req.sl.rq.u + txn->req.sl.rq.u_l; |
| p = path; |
| while (p < end && *p != '?') |
| p++; |
| |
| /* Stores the request path. */ |
| lua_pushstring(L, "path"); |
| lua_pushlstring(L, path, p - path); |
| lua_settable(L, -3); |
| |
| /* Stores the query string. */ |
| lua_pushstring(L, "qs"); |
| if (*p == '?') |
| p++; |
| lua_pushlstring(L, p, end - p); |
| lua_settable(L, -3); |
| |
| /* Stores the request path. */ |
| lua_pushstring(L, "length"); |
| lua_pushinteger(L, txn->req.body_len); |
| lua_settable(L, -3); |
| |
| /* Create an array of HTTP request headers. */ |
| lua_pushstring(L, "headers"); |
| MAY_LJMP(hlua_http_get_headers(L, &appctx->htxn, &appctx->htxn.s->txn->req)); |
| lua_settable(L, -3); |
| |
| /* Create an empty array of HTTP request headers. */ |
| lua_pushstring(L, "response"); |
| lua_newtable(L); |
| lua_settable(L, -3); |
| |
| /* Pop a class stream metatable and affect it to the table. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_applet_http_ref); |
| lua_setmetatable(L, -2); |
| |
| return 1; |
| } |
| |
| /* If expected data not yet available, it returns a yield. This function |
| * consumes the data in the buffer. It returns a string containing the |
| * data. This string can be empty. |
| */ |
| __LJMP static int hlua_applet_http_getline_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| struct stream_interface *si = appctx->appctx->owner; |
| struct channel *chn = si_ic(si); |
| int ret; |
| char *blk1; |
| int len1; |
| char *blk2; |
| int len2; |
| |
| /* Maybe we cant send a 100-continue ? */ |
| if (appctx->appctx->ctx.hlua_apphttp.flags & APPLET_100C) { |
| ret = bi_putblk(chn, HTTP_100C, strlen(HTTP_100C)); |
| /* if ret == -2 or -3 the channel closed or the message si too |
| * big for the buffers. We cant send anything. So, we ignoring |
| * the error, considers that the 100-continue is sent, and try |
| * to receive. |
| * If ret is -1, we dont have room in the buffer, so we yield. |
| */ |
| if (ret == -1) { |
| si_applet_cant_put(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_http_getline_yield, TICK_ETERNITY, 0)); |
| } |
| appctx->appctx->ctx.hlua_apphttp.flags &= ~APPLET_100C; |
| } |
| |
| /* Check for the end of the data. */ |
| if (appctx->appctx->ctx.hlua_apphttp.left_bytes <= 0) { |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* Read the maximum amount of data avalaible. */ |
| ret = bo_getline_nc(si_oc(si), &blk1, &len1, &blk2, &len2); |
| |
| /* Data not yet avalaible. return yield. */ |
| if (ret == 0) { |
| si_applet_cant_get(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_http_getline_yield, TICK_ETERNITY, 0)); |
| } |
| |
| /* End of data: commit the total strings and return. */ |
| if (ret < 0) { |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* Ensure that the block 2 length is usable. */ |
| if (ret == 1) |
| len2 = 0; |
| |
| /* Copy the fisrt block caping to the length required. */ |
| if (len1 > appctx->appctx->ctx.hlua_apphttp.left_bytes) |
| len1 = appctx->appctx->ctx.hlua_apphttp.left_bytes; |
| luaL_addlstring(&appctx->b, blk1, len1); |
| appctx->appctx->ctx.hlua_apphttp.left_bytes -= len1; |
| |
| /* Copy the second block. */ |
| if (len2 > appctx->appctx->ctx.hlua_apphttp.left_bytes) |
| len2 = appctx->appctx->ctx.hlua_apphttp.left_bytes; |
| luaL_addlstring(&appctx->b, blk2, len2); |
| appctx->appctx->ctx.hlua_apphttp.left_bytes -= len2; |
| |
| /* Consume input channel output buffer data. */ |
| bo_skip(si_oc(si), len1 + len2); |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* Check arguments for the fucntion "hlua_channel_get_yield". */ |
| __LJMP static int hlua_applet_http_getline(lua_State *L) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| |
| /* Initialise the string catenation. */ |
| luaL_buffinit(L, &appctx->b); |
| |
| return MAY_LJMP(hlua_applet_http_getline_yield(L, 0, 0)); |
| } |
| |
| /* If expected data not yet available, it returns a yield. This function |
| * consumes the data in the buffer. It returns a string containing the |
| * data. This string can be empty. |
| */ |
| __LJMP static int hlua_applet_http_recv_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| struct stream_interface *si = appctx->appctx->owner; |
| int len = MAY_LJMP(luaL_checkinteger(L, 2)); |
| struct channel *chn = si_ic(si); |
| int ret; |
| char *blk1; |
| int len1; |
| char *blk2; |
| int len2; |
| |
| /* Maybe we cant send a 100-continue ? */ |
| if (appctx->appctx->ctx.hlua_apphttp.flags & APPLET_100C) { |
| ret = bi_putblk(chn, HTTP_100C, strlen(HTTP_100C)); |
| /* if ret == -2 or -3 the channel closed or the message si too |
| * big for the buffers. We cant send anything. So, we ignoring |
| * the error, considers that the 100-continue is sent, and try |
| * to receive. |
| * If ret is -1, we dont have room in the buffer, so we yield. |
| */ |
| if (ret == -1) { |
| si_applet_cant_put(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_http_recv_yield, TICK_ETERNITY, 0)); |
| } |
| appctx->appctx->ctx.hlua_apphttp.flags &= ~APPLET_100C; |
| } |
| |
| /* Read the maximum amount of data avalaible. */ |
| ret = bo_getblk_nc(si_oc(si), &blk1, &len1, &blk2, &len2); |
| |
| /* Data not yet avalaible. return yield. */ |
| if (ret == 0) { |
| si_applet_cant_get(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_http_recv_yield, TICK_ETERNITY, 0)); |
| } |
| |
| /* End of data: commit the total strings and return. */ |
| if (ret < 0) { |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* Ensure that the block 2 length is usable. */ |
| if (ret == 1) |
| len2 = 0; |
| |
| /* Copy the fisrt block caping to the length required. */ |
| if (len1 > len) |
| len1 = len; |
| luaL_addlstring(&appctx->b, blk1, len1); |
| len -= len1; |
| |
| /* Copy the second block. */ |
| if (len2 > len) |
| len2 = len; |
| luaL_addlstring(&appctx->b, blk2, len2); |
| len -= len2; |
| |
| /* Consume input channel output buffer data. */ |
| bo_skip(si_oc(si), len1 + len2); |
| if (appctx->appctx->ctx.hlua_apphttp.left_bytes != -1) |
| appctx->appctx->ctx.hlua_apphttp.left_bytes -= len; |
| |
| /* If we are no other data avalaible, yield waiting for new data. */ |
| if (len > 0) { |
| lua_pushinteger(L, len); |
| lua_replace(L, 2); |
| si_applet_cant_get(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_http_recv_yield, TICK_ETERNITY, 0)); |
| } |
| |
| /* return the result. */ |
| luaL_pushresult(&appctx->b); |
| return 1; |
| } |
| |
| /* Check arguments for the fucntion "hlua_channel_get_yield". */ |
| __LJMP static int hlua_applet_http_recv(lua_State *L) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| int len = -1; |
| |
| /* Check arguments. */ |
| if (lua_gettop(L) > 2) |
| WILL_LJMP(luaL_error(L, "The 'recv' function requires between 1 and 2 arguments.")); |
| if (lua_gettop(L) >= 2) { |
| len = MAY_LJMP(luaL_checkinteger(L, 2)); |
| lua_pop(L, 1); |
| } |
| |
| /* Check the required length */ |
| if (len == -1 || len > appctx->appctx->ctx.hlua_apphttp.left_bytes) |
| len = appctx->appctx->ctx.hlua_apphttp.left_bytes; |
| lua_pushinteger(L, len); |
| |
| /* Initialise the string catenation. */ |
| luaL_buffinit(L, &appctx->b); |
| |
| return MAY_LJMP(hlua_applet_http_recv_yield(L, 0, 0)); |
| } |
| |
| /* Append data in the output side of the buffer. This data is immediatly |
| * sent. The fcuntion returns the ammount of data writed. If the buffer |
| * cannot contains the data, the function yield. The function returns -1 |
| * if the channel is closed. |
| */ |
| __LJMP static int hlua_applet_http_send_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| size_t len; |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| const char *str = MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| int l = MAY_LJMP(luaL_checkinteger(L, 3)); |
| struct stream_interface *si = appctx->appctx->owner; |
| struct channel *chn = si_ic(si); |
| int max; |
| |
| /* Get the max amount of data which can write as input in the channel. */ |
| max = channel_recv_max(chn); |
| if (max > (len - l)) |
| max = len - l; |
| |
| /* Copy data. */ |
| bi_putblk(chn, str + l, max); |
| |
| /* update counters. */ |
| l += max; |
| lua_pop(L, 1); |
| lua_pushinteger(L, l); |
| |
| /* If some data is not send, declares the situation to the |
| * applet, and returns a yield. |
| */ |
| if (l < len) { |
| si_applet_cant_put(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_http_send_yield, TICK_ETERNITY, 0)); |
| } |
| |
| return 1; |
| } |
| |
| /* Just a wraper of "hlua_applet_send_yield". This wrapper permits |
| * yield the LUA process, and resume it without checking the |
| * input arguments. |
| */ |
| __LJMP static int hlua_applet_http_send(lua_State *L) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| size_t len; |
| char hex[10]; |
| |
| MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| |
| /* If transfer encoding chunked is selected, we surround the data |
| * by chunk data. |
| */ |
| if (appctx->appctx->ctx.hlua_apphttp.flags & APPLET_CHUNKED) { |
| snprintf(hex, 9, "%x", (unsigned int)len); |
| lua_pushfstring(L, "%s\r\n", hex); |
| lua_insert(L, 2); /* swap the last 2 entries. */ |
| lua_pushstring(L, "\r\n"); |
| lua_concat(L, 3); |
| } |
| |
| /* This interger is used for followinf the amount of data sent. */ |
| lua_pushinteger(L, 0); |
| |
| /* We want to send some data. Headers must be sent. */ |
| if (!(appctx->appctx->ctx.hlua_apphttp.flags & APPLET_HDR_SENT)) { |
| hlua_pusherror(L, "Lua: 'send' you must call start_response() before sending data."); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| return MAY_LJMP(hlua_applet_http_send_yield(L, 0, 0)); |
| } |
| |
| __LJMP static int hlua_applet_http_addheader(lua_State *L) |
| { |
| const char *name; |
| int ret; |
| |
| MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| name = MAY_LJMP(luaL_checkstring(L, 2)); |
| MAY_LJMP(luaL_checkstring(L, 3)); |
| |
| /* Push in the stack the "response" entry. */ |
| ret = lua_getfield(L, 1, "response"); |
| if (ret != LUA_TTABLE) { |
| hlua_pusherror(L, "Lua: 'add_header' internal error: AppletHTTP['response'] " |
| "is expected as an array. %s found", lua_typename(L, ret)); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* check if the header is already registered if it is not |
| * the case, register it. |
| */ |
| ret = lua_getfield(L, -1, name); |
| if (ret == LUA_TNIL) { |
| |
| /* Entry not found. */ |
| lua_pop(L, 1); /* remove the nil. The "response" table is the top of the stack. */ |
| |
| /* Insert the new header name in the array in the top of the stack. |
| * It left the new array in the top of the stack. |
| */ |
| lua_newtable(L); |
| lua_pushvalue(L, 2); |
| lua_pushvalue(L, -2); |
| lua_settable(L, -4); |
| |
| } else if (ret != LUA_TTABLE) { |
| |
| /* corruption error. */ |
| hlua_pusherror(L, "Lua: 'add_header' internal error: AppletHTTP['response']['%s'] " |
| "is expected as an array. %s found", name, lua_typename(L, ret)); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Now the top od thestack is an array of values. We push |
| * the header value as new entry. |
| */ |
| lua_pushvalue(L, 3); |
| ret = lua_rawlen(L, -2); |
| lua_rawseti(L, -2, ret + 1); |
| lua_pushboolean(L, 1); |
| return 1; |
| } |
| |
| __LJMP static int hlua_applet_http_status(lua_State *L) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| int status = MAY_LJMP(luaL_checkinteger(L, 2)); |
| |
| if (status < 100 || status > 599) { |
| lua_pushboolean(L, 0); |
| return 1; |
| } |
| |
| appctx->appctx->ctx.hlua_apphttp.status = status; |
| lua_pushboolean(L, 1); |
| return 1; |
| } |
| |
| /* We will build the status line and the headers of the HTTP response. |
| * We will try send at once if its not possible, we give back the hand |
| * waiting for more room. |
| */ |
| __LJMP static int hlua_applet_http_start_response_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| struct stream_interface *si = appctx->appctx->owner; |
| struct channel *chn = si_ic(si); |
| int ret; |
| size_t len; |
| const char *msg; |
| |
| /* Get the message as the first argument on the stack. */ |
| msg = MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| |
| /* Send the message at once. */ |
| ret = bi_putblk(chn, msg, len); |
| |
| /* if ret == -2 or -3 the channel closed or the message si too |
| * big for the buffers. |
| */ |
| if (ret == -2 || ret == -3) { |
| hlua_pusherror(L, "Lua: 'start_response': response header block too big"); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* If ret is -1, we dont have room in the buffer, so we yield. */ |
| if (ret == -1) { |
| si_applet_cant_put(si); |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_applet_http_start_response_yield, TICK_ETERNITY, 0)); |
| } |
| |
| /* Headers sent, set the flag. */ |
| appctx->appctx->ctx.hlua_apphttp.flags |= APPLET_HDR_SENT; |
| return 0; |
| } |
| |
| __LJMP static int hlua_applet_http_start_response(lua_State *L) |
| { |
| struct chunk *tmp = get_trash_chunk(); |
| struct hlua_appctx *appctx = MAY_LJMP(hlua_checkapplet_http(L, 1)); |
| const char *name; |
| const char *value; |
| int id; |
| int hdr_connection = 0; |
| int hdr_contentlength = -1; |
| int hdr_chunked = 0; |
| |
| /* Use the same http version than the request. */ |
| chunk_appendf(tmp, "HTTP/1.%c %d %s\r\n", |
| appctx->appctx->ctx.hlua_apphttp.flags & APPLET_HTTP11 ? '1' : '0', |
| appctx->appctx->ctx.hlua_apphttp.status, |
| get_reason(appctx->appctx->ctx.hlua_apphttp.status)); |
| |
| /* Get the array associated to the field "response" in the object AppletHTTP. */ |
| lua_pushvalue(L, 0); |
| if (lua_getfield(L, 1, "response") != LUA_TTABLE) { |
| hlua_pusherror(L, "Lua applet http '%s': AppletHTTP['response'] missing.\n", |
| appctx->appctx->rule->arg.hlua_rule->fcn.name); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Browse the list of headers. */ |
| lua_pushnil(L); |
| while(lua_next(L, -2) != 0) { |
| |
| /* We expect a string as -2. */ |
| if (lua_type(L, -2) != LUA_TSTRING) { |
| hlua_pusherror(L, "Lua applet http '%s': AppletHTTP['response'][] element must be a string. got %s.\n", |
| appctx->appctx->rule->arg.hlua_rule->fcn.name, |
| lua_typename(L, lua_type(L, -2))); |
| WILL_LJMP(lua_error(L)); |
| } |
| name = lua_tostring(L, -2); |
| |
| /* We expect an array as -1. */ |
| if (lua_type(L, -1) != LUA_TTABLE) { |
| hlua_pusherror(L, "Lua applet http '%s': AppletHTTP['response']['%s'] element must be an table. got %s.\n", |
| appctx->appctx->rule->arg.hlua_rule->fcn.name, |
| name, |
| lua_typename(L, lua_type(L, -1))); |
| WILL_LJMP(lua_error(L)); |
| } |
| |
| /* Browse the table who is on the top of the stack. */ |
| lua_pushnil(L); |
| while(lua_next(L, -2) != 0) { |
| |
| /* We expect a number as -2. */ |
| if (lua_type(L, -2) != LUA_TNUMBER) { |
| hlua_pusherror(L, "Lua applet http '%s': AppletHTTP['response']['%s'][] element must be a number. got %s.\n", |
| appctx->appctx->rule->arg.hlua_rule->fcn.name, |
| name, |
| lua_typename(L, lua_type(L, -2))); |
| WILL_LJMP(lua_error(L)); |
| } |
| id = lua_tointeger(L, -2); |
| |
| /* We expect a string as -2. */ |
| if (lua_type(L, -1) != LUA_TSTRING) { |
| hlua_pusherror(L, "Lua applet http '%s': AppletHTTP['response']['%s'][%d] element must be a string. got %s.\n", |
| appctx->appctx->rule->arg.hlua_rule->fcn.name, |
| name, id, |
| lua_typename(L, lua_type(L, -1))); |
| WILL_LJMP(lua_error(L)); |
| } |
| value = lua_tostring(L, -1); |
| |
| /* Catenate a new header. */ |
| chunk_appendf(tmp, "%s: %s\r\n", name, value); |
| |
| /* Protocol checks. */ |
| |
| /* Check if the header conneciton is present. */ |
| if (strcasecmp("connection", name) == 0) |
| hdr_connection = 1; |
| |
| /* Copy the header content length. The length conversion |
| * is done without control. If it contains a ad value, this |
| * is not our problem. |
| */ |
| if (strcasecmp("content-length", name) == 0) |
| hdr_contentlength = atoi(value); |
| |
| /* Check if the client annouces a transfer-encoding chunked it self. */ |
| if (strcasecmp("transfer-encoding", name) == 0 && |
| strcasecmp("chunked", value) == 0) |
| hdr_chunked = 1; |
| |
| /* Remove the array from the stack, and get next element with a remaining string. */ |
| lua_pop(L, 1); |
| } |
| |
| /* Remove the array from the stack, and get next element with a remaining string. */ |
| lua_pop(L, 1); |
| } |
| |
| /* If the http protocol version is 1.1, we expect an header "connection" set |
| * to "close" to be HAProxy/keeplive compliant. Otherwise, we expect nothing. |
| * If the header conneciton is present, don't change it, if it is not present, |
| * we must set. |
| * |
| * we set a "connection: close" header for ensuring that the keepalive will be |
| * respected by haproxy. HAProcy considers that the application cloe the connection |
| * and it keep the connection from the client open. |
| */ |
| if (appctx->appctx->ctx.hlua_apphttp.flags & APPLET_HTTP11 && !hdr_connection) |
| chunk_appendf(tmp, "Connection: close\r\n"); |
| |
| /* If we dont have a content-length set, we must announce a transfer enconding |
| * chunked. This is required by haproxy for the keepalive compliance. |
| * If the applet annouce a transfer-encoding chunked itslef, don't |
| * do anything. |
| */ |
| if (hdr_contentlength == -1 && hdr_chunked == 0) { |
| chunk_appendf(tmp, "Transfer-encoding: chunked\r\n"); |
| appctx->appctx->ctx.hlua_apphttp.flags |= APPLET_CHUNKED; |
| } |
| |
| /* Finalize headers. */ |
| chunk_appendf(tmp, "\r\n"); |
| |
| /* Remove the last entry and the array of headers */ |
| lua_pop(L, 2); |
| |
| /* Push the headers block. */ |
| lua_pushlstring(L, tmp->str, tmp->len); |
| |
| return MAY_LJMP(hlua_applet_http_start_response_yield(L, 0, 0)); |
| } |
| |
| /* |
| * |
| * |
| * Class HTTP |
| * |
| * |
| */ |
| |
| /* Returns a struct hlua_txn if the stack entry "ud" is |
| * a class stream, otherwise it throws an error. |
| */ |
| __LJMP static struct hlua_txn *hlua_checkhttp(lua_State *L, int ud) |
| { |
| return (struct hlua_txn *)MAY_LJMP(hlua_checkudata(L, ud, class_http_ref)); |
| } |
| |
| /* This function creates and push in the stack a HTTP object |
| * according with a current TXN. |
| */ |
| static int hlua_http_new(lua_State *L, struct hlua_txn *txn) |
| { |
| struct hlua_txn *htxn; |
| |
| /* Check stack size. */ |
| if (!lua_checkstack(L, 3)) |
| return 0; |
| |
| /* Create the object: obj[0] = userdata. |
| * Note that the base of the Converters object is the |
| * same than the TXN object. |
| */ |
| lua_newtable(L); |
| htxn = lua_newuserdata(L, sizeof(*htxn)); |
| lua_rawseti(L, -2, 0); |
| |
| htxn->s = txn->s; |
| htxn->p = txn->p; |
| |
| /* Pop a class stream metatable and affect it to the table. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_http_ref); |
| lua_setmetatable(L, -2); |
| |
| return 1; |
| } |
| |
| /* This function creates ans returns an array of HTTP headers. |
| * This function does not fails. It is used as wrapper with the |
| * 2 following functions. |
| */ |
| __LJMP static int hlua_http_get_headers(lua_State *L, struct hlua_txn *htxn, struct http_msg *msg) |
| { |
| const char *cur_ptr, *cur_next, *p; |
| int old_idx, cur_idx; |
| struct hdr_idx_elem *cur_hdr; |
| const char *hn, *hv; |
| int hnl, hvl; |
| int type; |
| const char *in; |
| char *out; |
| int len; |
| |
| /* Create the table. */ |
| lua_newtable(L); |
| |
| if (!htxn->s->txn) |
| return 1; |
| |
| /* Build array of headers. */ |
| old_idx = 0; |
| cur_next = msg->chn->buf->p + hdr_idx_first_pos(&htxn->s->txn->hdr_idx); |
| |
| while (1) { |
| cur_idx = htxn->s->txn->hdr_idx.v[old_idx].next; |
| if (!cur_idx) |
| break; |
| old_idx = cur_idx; |
| |
| cur_hdr = &htxn->s->txn->hdr_idx.v[cur_idx]; |
| cur_ptr = cur_next; |
| cur_next = cur_ptr + cur_hdr->len + cur_hdr->cr + 1; |
| |
| /* Now we have one full header at cur_ptr of len cur_hdr->len, |
| * and the next header starts at cur_next. We'll check |
| * this header in the list as well as against the default |
| * rule. |
| */ |
| |
| /* look for ': *'. */ |
| hn = cur_ptr; |
| for (p = cur_ptr; p < cur_ptr + cur_hdr->len && *p != ':'; p++); |
| if (p >= cur_ptr+cur_hdr->len) |
| continue; |
| hnl = p - hn; |
| p++; |
| while (p < cur_ptr+cur_hdr->len && ( *p == ' ' || *p == '\t' )) |
| p++; |
| if (p >= cur_ptr+cur_hdr->len) |
| continue; |
| hv = p; |
| hvl = cur_ptr+cur_hdr->len-p; |
| |
| /* Lowercase the key. Don't check the size of trash, it have |
| * the size of one buffer and the input data contains in one |
| * buffer. |
| */ |
| out = trash.str; |
| for (in=hn; in<hn+hnl; in++, out++) |
| *out = tolower(*in); |
| *out = '\0'; |
| |
| /* Check for existing entry: |
| * assume that the table is on the top of the stack, and |
| * push the key in the stack, the function lua_gettable() |
| * perform the lookup. |
| */ |
| lua_pushlstring(L, trash.str, hnl); |
| lua_gettable(L, -2); |
| type = lua_type(L, -1); |
| |
| switch (type) { |
| case LUA_TNIL: |
| /* Table not found, create it. */ |
| lua_pop(L, 1); /* remove the nil value. */ |
| lua_pushlstring(L, trash.str, hnl); /* push the header name as key. */ |
| lua_newtable(L); /* create and push empty table. */ |
| lua_pushlstring(L, hv, hvl); /* push header value. */ |
| lua_rawseti(L, -2, 0); /* index header value (pop it). */ |
| lua_rawset(L, -3); /* index new table with header name (pop the values). */ |
| break; |
| |
| case LUA_TTABLE: |
| /* Entry found: push the value in the table. */ |
| len = lua_rawlen(L, -1); |
| lua_pushlstring(L, hv, hvl); /* push header value. */ |
| lua_rawseti(L, -2, len+1); /* index header value (pop it). */ |
| lua_pop(L, 1); /* remove the table (it is stored in the main table). */ |
| break; |
| |
| default: |
| /* Other cases are errors. */ |
| hlua_pusherror(L, "internal error during the parsing of headers."); |
| WILL_LJMP(lua_error(L)); |
| } |
| } |
| |
| return 1; |
| } |
| |
| __LJMP static int hlua_http_req_get_headers(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 1, "req_get_headers")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return hlua_http_get_headers(L, htxn, &htxn->s->txn->req); |
| } |
| |
| __LJMP static int hlua_http_res_get_headers(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 1, "res_get_headers")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return hlua_http_get_headers(L, htxn, &htxn->s->txn->rsp); |
| } |
| |
| /* This function replace full header, or just a value in |
| * the request or in the response. It is a wrapper fir the |
| * 4 following functions. |
| */ |
| __LJMP static inline int hlua_http_rep_hdr(lua_State *L, struct hlua_txn *htxn, |
| struct http_msg *msg, int action) |
| { |
| size_t name_len; |
| const char *name = MAY_LJMP(luaL_checklstring(L, 2, &name_len)); |
| const char *reg = MAY_LJMP(luaL_checkstring(L, 3)); |
| const char *value = MAY_LJMP(luaL_checkstring(L, 4)); |
| struct my_regex re; |
| |
| if (!regex_comp(reg, &re, 1, 1, NULL)) |
| WILL_LJMP(luaL_argerror(L, 3, "invalid regex")); |
| |
| http_transform_header_str(htxn->s, msg, name, name_len, value, &re, action); |
| regex_free(&re); |
| return 0; |
| } |
| |
| __LJMP static int hlua_http_req_rep_hdr(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 4, "req_rep_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return MAY_LJMP(hlua_http_rep_hdr(L, htxn, &htxn->s->txn->req, ACT_HTTP_REPLACE_HDR)); |
| } |
| |
| __LJMP static int hlua_http_res_rep_hdr(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 4, "res_rep_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return MAY_LJMP(hlua_http_rep_hdr(L, htxn, &htxn->s->txn->rsp, ACT_HTTP_REPLACE_HDR)); |
| } |
| |
| __LJMP static int hlua_http_req_rep_val(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 4, "req_rep_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return MAY_LJMP(hlua_http_rep_hdr(L, htxn, &htxn->s->txn->req, ACT_HTTP_REPLACE_VAL)); |
| } |
| |
| __LJMP static int hlua_http_res_rep_val(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 4, "res_rep_val")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return MAY_LJMP(hlua_http_rep_hdr(L, htxn, &htxn->s->txn->rsp, ACT_HTTP_REPLACE_VAL)); |
| } |
| |
| /* This function deletes all the occurences of an header. |
| * It is a wrapper for the 2 following functions. |
| */ |
| __LJMP static inline int hlua_http_del_hdr(lua_State *L, struct hlua_txn *htxn, struct http_msg *msg) |
| { |
| size_t len; |
| const char *name = MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| struct hdr_ctx ctx; |
| struct http_txn *txn = htxn->s->txn; |
| |
| ctx.idx = 0; |
| while (http_find_header2(name, len, msg->chn->buf->p, &txn->hdr_idx, &ctx)) |
| http_remove_header2(msg, &txn->hdr_idx, &ctx); |
| return 0; |
| } |
| |
| __LJMP static int hlua_http_req_del_hdr(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 2, "req_del_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return hlua_http_del_hdr(L, htxn, &htxn->s->txn->req); |
| } |
| |
| __LJMP static int hlua_http_res_del_hdr(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 2, "req_del_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return hlua_http_del_hdr(L, htxn, &htxn->s->txn->rsp); |
| } |
| |
| /* This function adds an header. It is a wrapper used by |
| * the 2 following functions. |
| */ |
| __LJMP static inline int hlua_http_add_hdr(lua_State *L, struct hlua_txn *htxn, struct http_msg *msg) |
| { |
| size_t name_len; |
| const char *name = MAY_LJMP(luaL_checklstring(L, 2, &name_len)); |
| size_t value_len; |
| const char *value = MAY_LJMP(luaL_checklstring(L, 3, &value_len)); |
| char *p; |
| |
| /* Check length. */ |
| trash.len = value_len + name_len + 2; |
| if (trash.len > trash.size) |
| return 0; |
| |
| /* Creates the header string. */ |
| p = trash.str; |
| memcpy(p, name, name_len); |
| p += name_len; |
| *p = ':'; |
| p++; |
| *p = ' '; |
| p++; |
| memcpy(p, value, value_len); |
| |
| lua_pushboolean(L, http_header_add_tail2(msg, &htxn->s->txn->hdr_idx, |
| trash.str, trash.len) != 0); |
| |
| return 0; |
| } |
| |
| __LJMP static int hlua_http_req_add_hdr(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 3, "req_add_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return hlua_http_add_hdr(L, htxn, &htxn->s->txn->req); |
| } |
| |
| __LJMP static int hlua_http_res_add_hdr(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 3, "res_add_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| return hlua_http_add_hdr(L, htxn, &htxn->s->txn->rsp); |
| } |
| |
| static int hlua_http_req_set_hdr(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 3, "req_set_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| hlua_http_del_hdr(L, htxn, &htxn->s->txn->req); |
| return hlua_http_add_hdr(L, htxn, &htxn->s->txn->req); |
| } |
| |
| static int hlua_http_res_set_hdr(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 3, "res_set_hdr")); |
| htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| |
| hlua_http_del_hdr(L, htxn, &htxn->s->txn->rsp); |
| return hlua_http_add_hdr(L, htxn, &htxn->s->txn->rsp); |
| } |
| |
| /* This function set the method. */ |
| static int hlua_http_req_set_meth(lua_State *L) |
| { |
| struct hlua_txn *htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| size_t name_len; |
| const char *name = MAY_LJMP(luaL_checklstring(L, 2, &name_len)); |
| |
| lua_pushboolean(L, http_replace_req_line(0, name, name_len, htxn->p, htxn->s) != -1); |
| return 1; |
| } |
| |
| /* This function set the method. */ |
| static int hlua_http_req_set_path(lua_State *L) |
| { |
| struct hlua_txn *htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| size_t name_len; |
| const char *name = MAY_LJMP(luaL_checklstring(L, 2, &name_len)); |
| lua_pushboolean(L, http_replace_req_line(1, name, name_len, htxn->p, htxn->s) != -1); |
| return 1; |
| } |
| |
| /* This function set the query-string. */ |
| static int hlua_http_req_set_query(lua_State *L) |
| { |
| struct hlua_txn *htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| size_t name_len; |
| const char *name = MAY_LJMP(luaL_checklstring(L, 2, &name_len)); |
| |
| /* Check length. */ |
| if (name_len > trash.size - 1) { |
| lua_pushboolean(L, 0); |
| return 1; |
| } |
| |
| /* Add the mark question as prefix. */ |
| chunk_reset(&trash); |
| trash.str[trash.len++] = '?'; |
| memcpy(trash.str + trash.len, name, name_len); |
| trash.len += name_len; |
| |
| lua_pushboolean(L, http_replace_req_line(2, trash.str, trash.len, htxn->p, htxn->s) != -1); |
| return 1; |
| } |
| |
| /* This function set the uri. */ |
| static int hlua_http_req_set_uri(lua_State *L) |
| { |
| struct hlua_txn *htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| size_t name_len; |
| const char *name = MAY_LJMP(luaL_checklstring(L, 2, &name_len)); |
| |
| lua_pushboolean(L, http_replace_req_line(3, name, name_len, htxn->p, htxn->s) != -1); |
| return 1; |
| } |
| |
| /* This function set the response code. */ |
| static int hlua_http_res_set_status(lua_State *L) |
| { |
| struct hlua_txn *htxn = MAY_LJMP(hlua_checkhttp(L, 1)); |
| unsigned int code = MAY_LJMP(luaL_checkinteger(L, 2)); |
| |
| http_set_status(code, htxn->s); |
| return 0; |
| } |
| |
| /* |
| * |
| * |
| * Class TXN |
| * |
| * |
| */ |
| |
| /* Returns a struct hlua_session if the stack entry "ud" is |
| * a class stream, otherwise it throws an error. |
| */ |
| __LJMP static struct hlua_txn *hlua_checktxn(lua_State *L, int ud) |
| { |
| return (struct hlua_txn *)MAY_LJMP(hlua_checkudata(L, ud, class_txn_ref)); |
| } |
| |
| __LJMP static int hlua_set_var(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| const char *name; |
| size_t len; |
| struct sample smp; |
| |
| MAY_LJMP(check_args(L, 3, "set_var")); |
| |
| /* It is useles to retrieve the stream, but this function |
| * runs only in a stream context. |
| */ |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| name = MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| |
| /* Converts the third argument in a sample. */ |
| hlua_lua2smp(L, 3, &smp); |
| |
| /* Store the sample in a variable. */ |
| vars_set_by_name(name, len, htxn->s, &smp); |
| return 0; |
| } |
| |
| __LJMP static int hlua_get_var(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| const char *name; |
| size_t len; |
| struct sample smp; |
| |
| MAY_LJMP(check_args(L, 2, "get_var")); |
| |
| /* It is useles to retrieve the stream, but this function |
| * runs only in a stream context. |
| */ |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| name = MAY_LJMP(luaL_checklstring(L, 2, &len)); |
| |
| if (!vars_get_by_name(name, len, htxn->s, &smp)) { |
| lua_pushnil(L); |
| return 1; |
| } |
| |
| return hlua_smp2lua(L, &smp); |
| } |
| |
| __LJMP static int hlua_set_priv(lua_State *L) |
| { |
| struct hlua *hlua; |
| |
| MAY_LJMP(check_args(L, 2, "set_priv")); |
| |
| /* It is useles to retrieve the stream, but this function |
| * runs only in a stream context. |
| */ |
| MAY_LJMP(hlua_checktxn(L, 1)); |
| hlua = hlua_gethlua(L); |
| |
| /* Remove previous value. */ |
| if (hlua->Mref != -1) |
| luaL_unref(L, hlua->Mref, LUA_REGISTRYINDEX); |
| |
| /* Get and store new value. */ |
| lua_pushvalue(L, 2); /* Copy the element 2 at the top of the stack. */ |
| hlua->Mref = luaL_ref(L, LUA_REGISTRYINDEX); /* pop the previously pushed value. */ |
| |
| return 0; |
| } |
| |
| __LJMP static int hlua_get_priv(lua_State *L) |
| { |
| struct hlua *hlua; |
| |
| MAY_LJMP(check_args(L, 1, "get_priv")); |
| |
| /* It is useles to retrieve the stream, but this function |
| * runs only in a stream context. |
| */ |
| MAY_LJMP(hlua_checktxn(L, 1)); |
| hlua = hlua_gethlua(L); |
| |
| /* Push configuration index in the stack. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, hlua->Mref); |
| |
| return 1; |
| } |
| |
| /* Create stack entry containing a class TXN. This function |
| * return 0 if the stack does not contains free slots, |
| * otherwise it returns 1. |
| */ |
| static int hlua_txn_new(lua_State *L, struct stream *s, struct proxy *p, int dir) |
| { |
| struct hlua_txn *htxn; |
| |
| /* Check stack size. */ |
| if (!lua_checkstack(L, 3)) |
| return 0; |
| |
| /* NOTE: The allocation never fails. The failure |
| * throw an error, and the function never returns. |
| * if the throw is not avalaible, the process is aborted. |
| */ |
| /* Create the object: obj[0] = userdata. */ |
| lua_newtable(L); |
| htxn = lua_newuserdata(L, sizeof(*htxn)); |
| lua_rawseti(L, -2, 0); |
| |
| htxn->s = s; |
| htxn->p = p; |
| htxn->dir = dir; |
| |
| /* Create the "f" field that contains a list of fetches. */ |
| lua_pushstring(L, "f"); |
| if (!hlua_fetches_new(L, htxn, HLUA_F_MAY_USE_HTTP)) |
| return 0; |
| lua_rawset(L, -3); |
| |
| /* Create the "sf" field that contains a list of stringsafe fetches. */ |
| lua_pushstring(L, "sf"); |
| if (!hlua_fetches_new(L, htxn, HLUA_F_MAY_USE_HTTP | HLUA_F_AS_STRING)) |
| return 0; |
| lua_rawset(L, -3); |
| |
| /* Create the "c" field that contains a list of converters. */ |
| lua_pushstring(L, "c"); |
| if (!hlua_converters_new(L, htxn, 0)) |
| return 0; |
| lua_rawset(L, -3); |
| |
| /* Create the "sc" field that contains a list of stringsafe converters. */ |
| lua_pushstring(L, "sc"); |
| if (!hlua_converters_new(L, htxn, HLUA_F_AS_STRING)) |
| return 0; |
| lua_rawset(L, -3); |
| |
| /* Create the "req" field that contains the request channel object. */ |
| lua_pushstring(L, "req"); |
| if (!hlua_channel_new(L, &s->req)) |
| return 0; |
| lua_rawset(L, -3); |
| |
| /* Create the "res" field that contains the response channel object. */ |
| lua_pushstring(L, "res"); |
| if (!hlua_channel_new(L, &s->res)) |
| return 0; |
| lua_rawset(L, -3); |
| |
| /* Creates the HTTP object is the current proxy allows http. */ |
| lua_pushstring(L, "http"); |
| if (p->mode == PR_MODE_HTTP) { |
| if (!hlua_http_new(L, htxn)) |
| return 0; |
| } |
| else |
| lua_pushnil(L); |
| lua_rawset(L, -3); |
| |
| /* Pop a class sesison metatable and affect it to the userdata. */ |
| lua_rawgeti(L, LUA_REGISTRYINDEX, class_txn_ref); |
| lua_setmetatable(L, -2); |
| |
| return 1; |
| } |
| |
| __LJMP static int hlua_txn_deflog(lua_State *L) |
| { |
| const char *msg; |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 2, "deflog")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| msg = MAY_LJMP(luaL_checkstring(L, 2)); |
| |
| hlua_sendlog(htxn->s->be, htxn->s->logs.level, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_txn_log(lua_State *L) |
| { |
| int level; |
| const char *msg; |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 3, "log")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| level = MAY_LJMP(luaL_checkinteger(L, 2)); |
| msg = MAY_LJMP(luaL_checkstring(L, 3)); |
| |
| if (level < 0 || level >= NB_LOG_LEVELS) |
| WILL_LJMP(luaL_argerror(L, 1, "Invalid loglevel.")); |
| |
| hlua_sendlog(htxn->s->be, level, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_txn_log_debug(lua_State *L) |
| { |
| const char *msg; |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 2, "Debug")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| msg = MAY_LJMP(luaL_checkstring(L, 2)); |
| hlua_sendlog(htxn->s->be, LOG_DEBUG, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_txn_log_info(lua_State *L) |
| { |
| const char *msg; |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 2, "Info")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| msg = MAY_LJMP(luaL_checkstring(L, 2)); |
| hlua_sendlog(htxn->s->be, LOG_INFO, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_txn_log_warning(lua_State *L) |
| { |
| const char *msg; |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 2, "Warning")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| msg = MAY_LJMP(luaL_checkstring(L, 2)); |
| hlua_sendlog(htxn->s->be, LOG_WARNING, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_txn_log_alert(lua_State *L) |
| { |
| const char *msg; |
| struct hlua_txn *htxn; |
| |
| MAY_LJMP(check_args(L, 2, "Alert")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| msg = MAY_LJMP(luaL_checkstring(L, 2)); |
| hlua_sendlog(htxn->s->be, LOG_ALERT, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_txn_set_loglevel(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| int ll; |
| |
| MAY_LJMP(check_args(L, 2, "set_loglevel")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| ll = MAY_LJMP(luaL_checkinteger(L, 2)); |
| |
| if (ll < 0 || ll > 7) |
| WILL_LJMP(luaL_argerror(L, 2, "Bad log level. It must be between 0 and 7")); |
| |
| htxn->s->logs.level = ll; |
| return 0; |
| } |
| |
| __LJMP static int hlua_txn_set_tos(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| struct connection *cli_conn; |
| int tos; |
| |
| MAY_LJMP(check_args(L, 2, "set_tos")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| tos = MAY_LJMP(luaL_checkinteger(L, 2)); |
| |
| if ((cli_conn = objt_conn(htxn->s->sess->origin)) && conn_ctrl_ready(cli_conn)) |
| inet_set_tos(cli_conn->t.sock.fd, cli_conn->addr.from, tos); |
| |
| return 0; |
| } |
| |
| __LJMP static int hlua_txn_set_mark(lua_State *L) |
| { |
| #ifdef SO_MARK |
| struct hlua_txn *htxn; |
| struct connection *cli_conn; |
| int mark; |
| |
| MAY_LJMP(check_args(L, 2, "set_mark")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| mark = MAY_LJMP(luaL_checkinteger(L, 2)); |
| |
| if ((cli_conn = objt_conn(htxn->s->sess->origin)) && conn_ctrl_ready(cli_conn)) |
| setsockopt(cli_conn->t.sock.fd, SOL_SOCKET, SO_MARK, &mark, sizeof(mark)); |
| #endif |
| return 0; |
| } |
| |
| /* This function is an Lua binding that send pending data |
| * to the client, and close the stream interface. |
| */ |
| __LJMP static int hlua_txn_done(lua_State *L) |
| { |
| struct hlua_txn *htxn; |
| struct channel *ic, *oc; |
| |
| MAY_LJMP(check_args(L, 1, "close")); |
| htxn = MAY_LJMP(hlua_checktxn(L, 1)); |
| |
| ic = &htxn->s->req; |
| oc = &htxn->s->res; |
| |
| if (htxn->s->txn) { |
| /* HTTP mode, let's stay in sync with the stream */ |
| bi_fast_delete(ic->buf, htxn->s->txn->req.sov); |
| htxn->s->txn->req.next -= htxn->s->txn->req.sov; |
| htxn->s->txn->req.sov = 0; |
| ic->analysers &= AN_REQ_HTTP_XFER_BODY; |
| oc->analysers = AN_RES_HTTP_XFER_BODY; |
| htxn->s->txn->req.msg_state = HTTP_MSG_CLOSED; |
| htxn->s->txn->rsp.msg_state = HTTP_MSG_DONE; |
| |
| /* Note that if we want to support keep-alive, we need |
| * to bypass the close/shutr_now calls below, but that |
| * may only be done if the HTTP request was already |
| * processed and the connection header is known (ie |
| * not during TCP rules). |
| */ |
| } |
| |
| channel_auto_read(ic); |
| channel_abort(ic); |
| channel_auto_close(ic); |
| channel_erase(ic); |
| |
| oc->wex = tick_add_ifset(now_ms, oc->wto); |
| channel_auto_read(oc); |
| channel_auto_close(oc); |
| channel_shutr_now(oc); |
| |
| ic->analysers = 0; |
| |
| WILL_LJMP(hlua_done(L)); |
| return 0; |
| } |
| |
| __LJMP static int hlua_log(lua_State *L) |
| { |
| int level; |
| const char *msg; |
| |
| MAY_LJMP(check_args(L, 2, "log")); |
| level = MAY_LJMP(luaL_checkinteger(L, 1)); |
| msg = MAY_LJMP(luaL_checkstring(L, 2)); |
| |
| if (level < 0 || level >= NB_LOG_LEVELS) |
| WILL_LJMP(luaL_argerror(L, 1, "Invalid loglevel.")); |
| |
| hlua_sendlog(NULL, level, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_log_debug(lua_State *L) |
| { |
| const char *msg; |
| |
| MAY_LJMP(check_args(L, 1, "debug")); |
| msg = MAY_LJMP(luaL_checkstring(L, 1)); |
| hlua_sendlog(NULL, LOG_DEBUG, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_log_info(lua_State *L) |
| { |
| const char *msg; |
| |
| MAY_LJMP(check_args(L, 1, "info")); |
| msg = MAY_LJMP(luaL_checkstring(L, 1)); |
| hlua_sendlog(NULL, LOG_INFO, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_log_warning(lua_State *L) |
| { |
| const char *msg; |
| |
| MAY_LJMP(check_args(L, 1, "warning")); |
| msg = MAY_LJMP(luaL_checkstring(L, 1)); |
| hlua_sendlog(NULL, LOG_WARNING, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_log_alert(lua_State *L) |
| { |
| const char *msg; |
| |
| MAY_LJMP(check_args(L, 1, "alert")); |
| msg = MAY_LJMP(luaL_checkstring(L, 1)); |
| hlua_sendlog(NULL, LOG_ALERT, msg); |
| return 0; |
| } |
| |
| __LJMP static int hlua_sleep_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| int wakeup_ms = lua_tointeger(L, -1); |
| if (now_ms < wakeup_ms) |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_sleep_yield, wakeup_ms, 0)); |
| return 0; |
| } |
| |
| __LJMP static int hlua_sleep(lua_State *L) |
| { |
| unsigned int delay; |
| unsigned int wakeup_ms; |
| |
| MAY_LJMP(check_args(L, 1, "sleep")); |
| |
| delay = MAY_LJMP(luaL_checkinteger(L, 1)) * 1000; |
| wakeup_ms = tick_add(now_ms, delay); |
| lua_pushinteger(L, wakeup_ms); |
| |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_sleep_yield, wakeup_ms, 0)); |
| return 0; |
| } |
| |
| __LJMP static int hlua_msleep(lua_State *L) |
| { |
| unsigned int delay; |
| unsigned int wakeup_ms; |
| |
| MAY_LJMP(check_args(L, 1, "msleep")); |
| |
| delay = MAY_LJMP(luaL_checkinteger(L, 1)); |
| wakeup_ms = tick_add(now_ms, delay); |
| lua_pushinteger(L, wakeup_ms); |
| |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_sleep_yield, wakeup_ms, 0)); |
| return 0; |
| } |
| |
| /* This functionis an LUA binding. it permits to give back |
| * the hand at the HAProxy scheduler. It is used when the |
| * LUA processing consumes a lot of time. |
| */ |
| __LJMP static int hlua_yield_yield(lua_State *L, int status, lua_KContext ctx) |
| { |
| return 0; |
| } |
| |
| __LJMP static int hlua_yield(lua_State *L) |
| { |
| WILL_LJMP(hlua_yieldk(L, 0, 0, hlua_yield_yield, TICK_ETERNITY, HLUA_CTRLYIELD)); |
| return 0; |
| } |
| |
| /* This function change the nice of the currently executed |
| * task. It is used set low or high priority at the current |
| * task. |
| */ |
| __LJMP static int hlua_set_nice(lua_State *L) |
| { |
| struct hlua *hlua; |
| int nice; |
| |
| MAY_LJMP(check_args(L, 1, "set_nice")); |
| hlua = hlua_gethlua(L); |
| nice = MAY_LJMP(luaL_checkinteger(L, 1)); |
| |
| /* If he task is not set, I'm in a start mode. */ |
| if (!hlua || !hlua->task) |
| return 0; |
| |
| if (nice < -1024) |
| nice = -1024; |
| else if (nice > 1024) |
| nice = 1024; |
| |
| hlua->task->nice = nice; |
| return 0; |
| } |
| |
| /* This function is used as a calback of a task. It is called by the |
| * HAProxy task subsystem when the task is awaked. The LUA runtime can |
| * return an E_AGAIN signal, the emmiter of this signal must set a |
| * signal to wake the task. |
| * |
| * Task wrapper are longjmp safe because the only one Lua code |
| * executed is the safe hlua_ctx_resume(); |
| */ |
| static struct task *hlua_process_task(struct task *task) |
| { |
| struct hlua *hlua = task->context; |
| enum hlua_exec status; |
| |
| /* We need to remove the task from the wait queue before executing |
| * the Lua code because we don't know if it needs to wait for |
| * another timer or not in the case of E_AGAIN. |
| */ |
| task_delete(task); |
| |
| /* If it is the first call to the task, we must initialize the |
| * execution timeouts. |
| */ |
| if (!HLUA_IS_RUNNING(hlua)) |
| hlua->max_time = hlua_timeout_task; |
| |
| /* Execute the Lua code. */ |
| status = hlua_ctx_resume(hlua, 1); |
| |
| switch (status) { |
| /* finished or yield */ |
| case HLUA_E_OK: |
| hlua_ctx_destroy(hlua); |
| task_delete(task); |
| task_free(task); |
| break; |
| |
| case HLUA_E_AGAIN: /* co process or timeout wake me later. */ |
| if (hlua->wake_time != TICK_ETERNITY) |
| task_schedule(task, hlua->wake_time); |
| break; |
| |
| /* finished with error. */ |
| case HLUA_E_ERRMSG: |
| SEND_ERR(NULL, "Lua task: %s.\n", lua_tostring(hlua->T, -1)); |
| hlua_ctx_destroy(hlua); |
| task_delete(task); |
| task_free(task); |
| break; |
| |
| case HLUA_E_ERR: |
| default: |
| SEND_ERR(NULL, "Lua task: unknown error.\n"); |
| hlua_ctx_destroy(hlua); |
| task_delete(task); |
| task_free(task); |
| break; |
| } |
| return NULL; |
| } |
| |
| /* This function is an LUA binding that register LUA function to be |
| * executed after the HAProxy configuration parsing and before the |
| * HAProxy scheduler starts. This function expect only one LUA |
| * argument that is a function. This function returns nothing, but |
| * throws if an error is encountered. |
| */ |
| __LJMP static int hlua_register_init(lua_State *L) |
| { |
| struct hlua_init_function *init; |
| int ref; |
| |
| MAY_LJMP(check_args(L, 1, "register_init")); |
| |
| ref = MAY_LJMP(hlua_checkfunction(L, 1)); |
| |
| init = calloc(1, sizeof(*init)); |
| if (!init) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| init->function_ref = ref; |
| LIST_ADDQ(&hlua_init_functions, &init->l); |
| return 0; |
| } |
| |
| /* This functio is an LUA binding. It permits to register a task |
| * executed in parallel of the main HAroxy activity. The task is |
| * created and it is set in the HAProxy scheduler. It can be called |
| * from the "init" section, "post init" or during the runtime. |
| * |
| * Lua prototype: |
| * |
| * <none> core.register_task(<function>) |
| */ |
| static int hlua_register_task(lua_State *L) |
| { |
| struct hlua *hlua; |
| struct task *task; |
| int ref; |
| |
| MAY_LJMP(check_args(L, 1, "register_task")); |
| |
| ref = MAY_LJMP(hlua_checkfunction(L, 1)); |
| |
| hlua = calloc(1, sizeof(*hlua)); |
| if (!hlua) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| task = task_new(); |
| task->context = hlua; |
| task->process = hlua_process_task; |
| |
| if (!hlua_ctx_init(hlua, task)) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| /* Restore the function in the stack. */ |
| lua_rawgeti(hlua->T, LUA_REGISTRYINDEX, ref); |
| hlua->nargs = 0; |
| |
| /* Schedule task. */ |
| task_schedule(task, now_ms); |
| |
| return 0; |
| } |
| |
| /* Wrapper called by HAProxy to execute an LUA converter. This wrapper |
| * doesn't allow "yield" functions because the HAProxy engine cannot |
| * resume converters. |
| */ |
| static int hlua_sample_conv_wrapper(const struct arg *arg_p, struct sample *smp, void *private) |
| { |
| struct hlua_function *fcn = (struct hlua_function *)private; |
| struct stream *stream = smp->strm; |
| |
| /* In the execution wrappers linked with a stream, the |
| * Lua context can be not initialized. This behavior |
| * permits to save performances because a systematic |
| * Lua initialization cause 5% performances loss. |
| */ |
| if (!stream->hlua.T && !hlua_ctx_init(&stream->hlua, stream->task)) { |
| SEND_ERR(stream->be, "Lua converter '%s': can't initialize Lua context.\n", fcn->name); |
| return 0; |
| } |
| |
| /* If it is the first run, initialize the data for the call. */ |
| if (!HLUA_IS_RUNNING(&stream->hlua)) { |
| |
| /* The following Lua calls can fail. */ |
| if (!SET_SAFE_LJMP(stream->hlua.T)) { |
| SEND_ERR(stream->be, "Lua converter '%s': critical error.\n", fcn->name); |
| return 0; |
| } |
| |
| /* Check stack available size. */ |
| if (!lua_checkstack(stream->hlua.T, 1)) { |
| SEND_ERR(stream->be, "Lua converter '%s': full stack.\n", fcn->name); |
| RESET_SAFE_LJMP(stream->hlua.T); |
| return 0; |
| } |
| |
| /* Restore the function in the stack. */ |
| lua_rawgeti(stream->hlua.T, LUA_REGISTRYINDEX, fcn->function_ref); |
| |
| /* convert input sample and pust-it in the stack. */ |
| if (!lua_checkstack(stream->hlua.T, 1)) { |
| SEND_ERR(stream->be, "Lua converter '%s': full stack.\n", fcn->name); |
| RESET_SAFE_LJMP(stream->hlua.T); |
| return 0; |
| } |
| hlua_smp2lua(stream->hlua.T, smp); |
| stream->hlua.nargs = 2; |
| |
| /* push keywords in the stack. */ |
| if (arg_p) { |
| for (; arg_p->type != ARGT_STOP; arg_p++) { |
| if (!lua_checkstack(stream->hlua.T, 1)) { |
| SEND_ERR(stream->be, "Lua converter '%s': full stack.\n", fcn->name); |
| RESET_SAFE_LJMP(stream->hlua.T); |
| return 0; |
| } |
| hlua_arg2lua(stream->hlua.T, arg_p); |
| stream->hlua.nargs++; |
| } |
| } |
| |
| /* We must initialize the execution timeouts. */ |
| stream->hlua.max_time = hlua_timeout_session; |
| |
| /* At this point the execution is safe. */ |
| RESET_SAFE_LJMP(stream->hlua.T); |
| } |
| |
| /* Execute the function. */ |
| switch (hlua_ctx_resume(&stream->hlua, 0)) { |
| /* finished. */ |
| case HLUA_E_OK: |
| /* Convert the returned value in sample. */ |
| hlua_lua2smp(stream->hlua.T, -1, smp); |
| lua_pop(stream->hlua.T, 1); |
| return 1; |
| |
| /* yield. */ |
| case HLUA_E_AGAIN: |
| SEND_ERR(stream->be, "Lua converter '%s': cannot use yielded functions.\n", fcn->name); |
| return 0; |
| |
| /* finished with error. */ |
| case HLUA_E_ERRMSG: |
| /* Display log. */ |
| SEND_ERR(stream->be, "Lua converter '%s': %s.\n", |
| fcn->name, lua_tostring(stream->hlua.T, -1)); |
| lua_pop(stream->hlua.T, 1); |
| return 0; |
| |
| case HLUA_E_ERR: |
| /* Display log. */ |
| SEND_ERR(stream->be, "Lua converter '%s' returns an unknown error.\n", fcn->name); |
| |
| default: |
| return 0; |
| } |
| } |
| |
| /* Wrapper called by HAProxy to execute a sample-fetch. this wrapper |
| * doesn't allow "yield" functions because the HAProxy engine cannot |
| * resume sample-fetches. |
| */ |
| static int hlua_sample_fetch_wrapper(const struct arg *arg_p, struct sample *smp, |
| const char *kw, void *private) |
| { |
| struct hlua_function *fcn = (struct hlua_function *)private; |
| struct stream *stream = smp->strm; |
| |
| /* In the execution wrappers linked with a stream, the |
| * Lua context can be not initialized. This behavior |
| * permits to save performances because a systematic |
| * Lua initialization cause 5% performances loss. |
| */ |
| if (!stream->hlua.T && !hlua_ctx_init(&stream->hlua, stream->task)) { |
| SEND_ERR(stream->be, "Lua sample-fetch '%s': can't initialize Lua context.\n", fcn->name); |
| return 0; |
| } |
| |
| /* If it is the first run, initialize the data for the call. */ |
| if (!HLUA_IS_RUNNING(&stream->hlua)) { |
| |
| /* The following Lua calls can fail. */ |
| if (!SET_SAFE_LJMP(stream->hlua.T)) { |
| SEND_ERR(smp->px, "Lua sample-fetch '%s': critical error.\n", fcn->name); |
| return 0; |
| } |
| |
| /* Check stack available size. */ |
| if (!lua_checkstack(stream->hlua.T, 2)) { |
| SEND_ERR(smp->px, "Lua sample-fetch '%s': full stack.\n", fcn->name); |
| RESET_SAFE_LJMP(stream->hlua.T); |
| return 0; |
| } |
| |
| /* Restore the function in the stack. */ |
| lua_rawgeti(stream->hlua.T, LUA_REGISTRYINDEX, fcn->function_ref); |
| |
| /* push arguments in the stack. */ |
| if (!hlua_txn_new(stream->hlua.T, stream, smp->px, smp->opt & SMP_OPT_DIR)) { |
| SEND_ERR(smp->px, "Lua sample-fetch '%s': full stack.\n", fcn->name); |
| RESET_SAFE_LJMP(stream->hlua.T); |
| return 0; |
| } |
| stream->hlua.nargs = 1; |
| |
| /* push keywords in the stack. */ |
| for (; arg_p && arg_p->type != ARGT_STOP; arg_p++) { |
| /* Check stack available size. */ |
| if (!lua_checkstack(stream->hlua.T, 1)) { |
| SEND_ERR(smp->px, "Lua sample-fetch '%s': full stack.\n", fcn->name); |
| RESET_SAFE_LJMP(stream->hlua.T); |
| return 0; |
| } |
| if (!lua_checkstack(stream->hlua.T, 1)) { |
| SEND_ERR(smp->px, "Lua sample-fetch '%s': full stack.\n", fcn->name); |
| RESET_SAFE_LJMP(stream->hlua.T); |
| return 0; |
| } |
| hlua_arg2lua(stream->hlua.T, arg_p); |
| stream->hlua.nargs++; |
| } |
| |
| /* We must initialize the execution timeouts. */ |
| stream->hlua.max_time = hlua_timeout_session; |
| |
| /* At this point the execution is safe. */ |
| RESET_SAFE_LJMP(stream->hlua.T); |
| } |
| |
| /* Execute the function. */ |
| switch (hlua_ctx_resume(&stream->hlua, 0)) { |
| /* finished. */ |
| case HLUA_E_OK: |
| if (!hlua_check_proto(stream, (smp->opt & SMP_OPT_DIR) == SMP_OPT_DIR_RES)) |
| return 0; |
| /* Convert the returned value in sample. */ |
| hlua_lua2smp(stream->hlua.T, -1, smp); |
| lua_pop(stream->hlua.T, 1); |
| |
| /* Set the end of execution flag. */ |
| smp->flags &= ~SMP_F_MAY_CHANGE; |
| return 1; |
| |
| /* yield. */ |
| case HLUA_E_AGAIN: |
| hlua_check_proto(stream, (smp->opt & SMP_OPT_DIR) == SMP_OPT_DIR_RES); |
| SEND_ERR(smp->px, "Lua sample-fetch '%s': cannot use yielded functions.\n", fcn->name); |
| return 0; |
| |
| /* finished with error. */ |
| case HLUA_E_ERRMSG: |
| hlua_check_proto(stream, (smp->opt & SMP_OPT_DIR) == SMP_OPT_DIR_RES); |
| /* Display log. */ |
| SEND_ERR(smp->px, "Lua sample-fetch '%s': %s.\n", |
| fcn->name, lua_tostring(stream->hlua.T, -1)); |
| lua_pop(stream->hlua.T, 1); |
| return 0; |
| |
| case HLUA_E_ERR: |
| hlua_check_proto(stream, (smp->opt & SMP_OPT_DIR) == SMP_OPT_DIR_RES); |
| /* Display log. */ |
| SEND_ERR(smp->px, "Lua sample-fetch '%s' returns an unknown error.\n", fcn->name); |
| |
| default: |
| return 0; |
| } |
| } |
| |
| /* This function is an LUA binding used for registering |
| * "sample-conv" functions. It expects a converter name used |
| * in the haproxy configuration file, and an LUA function. |
| */ |
| __LJMP static int hlua_register_converters(lua_State *L) |
| { |
| struct sample_conv_kw_list *sck; |
| const char *name; |
| int ref; |
| int len; |
| struct hlua_function *fcn; |
| |
| MAY_LJMP(check_args(L, 2, "register_converters")); |
| |
| /* First argument : converter name. */ |
| name = MAY_LJMP(luaL_checkstring(L, 1)); |
| |
| /* Second argument : lua function. */ |
| ref = MAY_LJMP(hlua_checkfunction(L, 2)); |
| |
| /* Allocate and fill the sample fetch keyword struct. */ |
| sck = calloc(1, sizeof(*sck) + sizeof(struct sample_conv) * 2); |
| if (!sck) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| fcn = calloc(1, sizeof(*fcn)); |
| if (!fcn) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| /* Fill fcn. */ |
| fcn->name = strdup(name); |
| if (!fcn->name) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| fcn->function_ref = ref; |
| |
| /* List head */ |
| sck->list.n = sck->list.p = NULL; |
| |
| /* converter keyword. */ |
| len = strlen("lua.") + strlen(name) + 1; |
| sck->kw[0].kw = calloc(1, len); |
| if (!sck->kw[0].kw) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| snprintf((char *)sck->kw[0].kw, len, "lua.%s", name); |
| sck->kw[0].process = hlua_sample_conv_wrapper; |
| sck->kw[0].arg_mask = ARG5(0,STR,STR,STR,STR,STR); |
| sck->kw[0].val_args = NULL; |
| sck->kw[0].in_type = SMP_T_STR; |
| sck->kw[0].out_type = SMP_T_STR; |
| sck->kw[0].private = fcn; |
| |
| /* Register this new converter */ |
| sample_register_convs(sck); |
| |
| return 0; |
| } |
| |
| /* This fucntion is an LUA binding used for registering |
| * "sample-fetch" functions. It expects a converter name used |
| * in the haproxy configuration file, and an LUA function. |
| */ |
| __LJMP static int hlua_register_fetches(lua_State *L) |
| { |
| const char *name; |
| int ref; |
| int len; |
| struct sample_fetch_kw_list *sfk; |
| struct hlua_function *fcn; |
| |
| MAY_LJMP(check_args(L, 2, "register_fetches")); |
| |
| /* First argument : sample-fetch name. */ |
| name = MAY_LJMP(luaL_checkstring(L, 1)); |
| |
| /* Second argument : lua function. */ |
| ref = MAY_LJMP(hlua_checkfunction(L, 2)); |
| |
| /* Allocate and fill the sample fetch keyword struct. */ |
| sfk = calloc(1, sizeof(*sfk) + sizeof(struct sample_fetch) * 2); |
| if (!sfk) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| fcn = calloc(1, sizeof(*fcn)); |
| if (!fcn) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| /* Fill fcn. */ |
| fcn->name = strdup(name); |
| if (!fcn->name) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| fcn->function_ref = ref; |
| |
| /* List head */ |
| sfk->list.n = sfk->list.p = NULL; |
| |
| /* sample-fetch keyword. */ |
| len = strlen("lua.") + strlen(name) + 1; |
| sfk->kw[0].kw = calloc(1, len); |
| if (!sfk->kw[0].kw) |
| return luaL_error(L, "lua out of memory error."); |
| |
| snprintf((char *)sfk->kw[0].kw, len, "lua.%s", name); |
| sfk->kw[0].process = hlua_sample_fetch_wrapper; |
| sfk->kw[0].arg_mask = ARG5(0,STR,STR,STR,STR,STR); |
| sfk->kw[0].val_args = NULL; |
| sfk->kw[0].out_type = SMP_T_STR; |
| sfk->kw[0].use = SMP_USE_HTTP_ANY; |
| sfk->kw[0].val = 0; |
| sfk->kw[0].private = fcn; |
| |
| /* Register this new fetch. */ |
| sample_register_fetches(sfk); |
| |
| return 0; |
| } |
| |
| /* This function is a wrapper to execute each LUA function declared |
| * as an action wrapper during the initialisation period. This function |
| * return ACT_RET_CONT if the processing is finished (with or without |
| * error) and return ACT_RET_YIELD if the function must be called again |
| * because the LUA returns a yield. |
| */ |
| static enum act_return hlua_action(struct act_rule *rule, struct proxy *px, |
| struct session *sess, struct stream *s, int flags) |
| { |
| char **arg; |
| unsigned int analyzer; |
| int dir; |
| |
| switch (rule->from) { |
| case ACT_F_TCP_REQ_CNT: analyzer = AN_REQ_INSPECT_FE ; dir = SMP_OPT_DIR_REQ; break; |
| case ACT_F_TCP_RES_CNT: analyzer = AN_RES_INSPECT ; dir = SMP_OPT_DIR_RES; break; |
| case ACT_F_HTTP_REQ: analyzer = AN_REQ_HTTP_PROCESS_FE; dir = SMP_OPT_DIR_REQ; break; |
| case ACT_F_HTTP_RES: analyzer = AN_RES_HTTP_PROCESS_BE; dir = SMP_OPT_DIR_RES; break; |
| default: |
| SEND_ERR(px, "Lua: internal error while execute action.\n"); |
| return ACT_RET_CONT; |
| } |
| |
| /* In the execution wrappers linked with a stream, the |
| * Lua context can be not initialized. This behavior |
| * permits to save performances because a systematic |
| * Lua initialization cause 5% performances loss. |
| */ |
| if (!s->hlua.T && !hlua_ctx_init(&s->hlua, s->task)) { |
| SEND_ERR(px, "Lua action '%s': can't initialize Lua context.\n", |
| rule->arg.hlua_rule->fcn.name); |
| return ACT_RET_CONT; |
| } |
| |
| /* If it is the first run, initialize the data for the call. */ |
| if (!HLUA_IS_RUNNING(&s->hlua)) { |
| |
| /* The following Lua calls can fail. */ |
| if (!SET_SAFE_LJMP(s->hlua.T)) { |
| SEND_ERR(px, "Lua function '%s': critical error.\n", |
| rule->arg.hlua_rule->fcn.name); |
| return ACT_RET_CONT; |
| } |
| |
| /* Check stack available size. */ |
| if (!lua_checkstack(s->hlua.T, 1)) { |
| SEND_ERR(px, "Lua function '%s': full stack.\n", |
| rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(s->hlua.T); |
| return ACT_RET_CONT; |
| } |
| |
| /* Restore the function in the stack. */ |
| lua_rawgeti(s->hlua.T, LUA_REGISTRYINDEX, rule->arg.hlua_rule->fcn.function_ref); |
| |
| /* Create and and push object stream in the stack. */ |
| if (!hlua_txn_new(s->hlua.T, s, px, dir)) { |
| SEND_ERR(px, "Lua function '%s': full stack.\n", |
| rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(s->hlua.T); |
| return ACT_RET_CONT; |
| } |
| s->hlua.nargs = 1; |
| |
| /* push keywords in the stack. */ |
| for (arg = rule->arg.hlua_rule->args; arg && *arg; arg++) { |
| if (!lua_checkstack(s->hlua.T, 1)) { |
| SEND_ERR(px, "Lua function '%s': full stack.\n", |
| rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(s->hlua.T); |
| return ACT_RET_CONT; |
| } |
| lua_pushstring(s->hlua.T, *arg); |
| s->hlua.nargs++; |
| } |
| |
| /* Now the execution is safe. */ |
| RESET_SAFE_LJMP(s->hlua.T); |
| |
| /* We must initialize the execution timeouts. */ |
| s->hlua.max_time = hlua_timeout_session; |
| } |
| |
| /* Execute the function. */ |
| switch (hlua_ctx_resume(&s->hlua, !(flags & ACT_FLAG_FINAL))) { |
| /* finished. */ |
| case HLUA_E_OK: |
| if (!hlua_check_proto(s, dir)) |
| return ACT_RET_ERR; |
| return ACT_RET_CONT; |
| |
| /* yield. */ |
| case HLUA_E_AGAIN: |
| /* Set timeout in the required channel. */ |
| if (s->hlua.wake_time != TICK_ETERNITY) { |
| if (analyzer & (AN_REQ_INSPECT_FE|AN_REQ_HTTP_PROCESS_FE)) |
| s->req.analyse_exp = s->hlua.wake_time; |
| else if (analyzer & (AN_RES_INSPECT|AN_RES_HTTP_PROCESS_BE)) |
| s->res.analyse_exp = s->hlua.wake_time; |
| } |
| /* Some actions can be wake up when a "write" event |
| * is detected on a response channel. This is useful |
| * only for actions targetted on the requests. |
| */ |
| if (HLUA_IS_WAKERESWR(&s->hlua)) { |
| s->res.flags |= CF_WAKE_WRITE; |
| if ((analyzer & (AN_REQ_INSPECT_FE|AN_REQ_HTTP_PROCESS_FE))) |
| s->res.analysers |= analyzer; |
| } |
| if (HLUA_IS_WAKEREQWR(&s->hlua)) |
| s->req.flags |= CF_WAKE_WRITE; |
| return ACT_RET_YIELD; |
| |
| /* finished with error. */ |
| case HLUA_E_ERRMSG: |
| if (!hlua_check_proto(s, dir)) |
| return ACT_RET_ERR; |
| /* Display log. */ |
| SEND_ERR(px, "Lua function '%s': %s.\n", |
| rule->arg.hlua_rule->fcn.name, lua_tostring(s->hlua.T, -1)); |
| lua_pop(s->hlua.T, 1); |
| return ACT_RET_CONT; |
| |
| case HLUA_E_ERR: |
| if (!hlua_check_proto(s, dir)) |
| return ACT_RET_ERR; |
| /* Display log. */ |
| SEND_ERR(px, "Lua function '%s' return an unknown error.\n", |
| rule->arg.hlua_rule->fcn.name); |
| |
| default: |
| return ACT_RET_CONT; |
| } |
| } |
| |
| struct task *hlua_applet_wakeup(struct task *t) |
| { |
| struct appctx *ctx = t->context; |
| struct stream_interface *si = ctx->owner; |
| |
| /* If the applet is wake up without any expected work, the sheduler |
| * remove it from the run queue. This flag indicate that the applet |
| * is waiting for write. If the buffer is full, the main processing |
| * will send some data and after call the applet, otherwise it call |
| * the applet ASAP. |
| */ |
| si_applet_cant_put(si); |
| appctx_wakeup(ctx); |
| return NULL; |
| } |
| |
| static int hlua_applet_tcp_init(struct appctx *ctx, struct proxy *px, struct stream *strm) |
| { |
| struct stream_interface *si = ctx->owner; |
| struct hlua *hlua = &ctx->ctx.hlua_apptcp.hlua; |
| struct task *task; |
| char **arg; |
| |
| HLUA_INIT(hlua); |
| ctx->ctx.hlua_apptcp.flags = 0; |
| |
| /* Create task used by signal to wakeup applets. */ |
| task = task_new(); |
| if (!task) { |
| SEND_ERR(px, "Lua applet tcp '%s': out of memory.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| return 0; |
| } |
| task->nice = 0; |
| task->context = ctx; |
| task->process = hlua_applet_wakeup; |
| ctx->ctx.hlua_apptcp.task = task; |
| |
| /* In the execution wrappers linked with a stream, the |
| * Lua context can be not initialized. This behavior |
| * permits to save performances because a systematic |
| * Lua initialization cause 5% performances loss. |
| */ |
| if (!hlua_ctx_init(hlua, task)) { |
| SEND_ERR(px, "Lua applet tcp '%s': can't initialize Lua context.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| return 0; |
| } |
| |
| /* Set timeout according with the applet configuration. */ |
| hlua->max_time = ctx->applet->timeout; |
| |
| /* The following Lua calls can fail. */ |
| if (!SET_SAFE_LJMP(hlua->T)) { |
| SEND_ERR(px, "Lua applet tcp '%s': critical error.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(hlua->T); |
| return 0; |
| } |
| |
| /* Check stack available size. */ |
| if (!lua_checkstack(hlua->T, 1)) { |
| SEND_ERR(px, "Lua applet tcp '%s': full stack.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(hlua->T); |
| return 0; |
| } |
| |
| /* Restore the function in the stack. */ |
| lua_rawgeti(hlua->T, LUA_REGISTRYINDEX, ctx->rule->arg.hlua_rule->fcn.function_ref); |
| |
| /* Create and and push object stream in the stack. */ |
| if (!hlua_applet_tcp_new(hlua->T, ctx)) { |
| SEND_ERR(px, "Lua applet tcp '%s': full stack.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(hlua->T); |
| return 0; |
| } |
| hlua->nargs = 1; |
| |
| /* push keywords in the stack. */ |
| for (arg = ctx->rule->arg.hlua_rule->args; arg && *arg; arg++) { |
| if (!lua_checkstack(hlua->T, 1)) { |
| SEND_ERR(px, "Lua applet tcp '%s': full stack.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(hlua->T); |
| return 0; |
| } |
| lua_pushstring(hlua->T, *arg); |
| hlua->nargs++; |
| } |
| |
| RESET_SAFE_LJMP(hlua->T); |
| |
| /* Wakeup the applet ASAP. */ |
| si_applet_cant_get(si); |
| si_applet_cant_put(si); |
| |
| return 1; |
| } |
| |
| static void hlua_applet_tcp_fct(struct appctx *ctx) |
| { |
| struct stream_interface *si = ctx->owner; |
| struct stream *strm = si_strm(si); |
| struct channel *res = si_ic(si); |
| struct act_rule *rule = ctx->rule; |
| struct proxy *px = strm->be; |
| struct hlua *hlua = &ctx->ctx.hlua_apptcp.hlua; |
| |
| /* The applet execution is already done. */ |
| if (ctx->ctx.hlua_apptcp.flags & APPLET_DONE) |
| return; |
| |
| /* If the stream is disconnect or closed, ldo nothing. */ |
| if (unlikely(si->state == SI_ST_DIS || si->state == SI_ST_CLO)) |
| return; |
| |
| /* Execute the function. */ |
| switch (hlua_ctx_resume(hlua, 1)) { |
| /* finished. */ |
| case HLUA_E_OK: |
| ctx->ctx.hlua_apptcp.flags |= APPLET_DONE; |
| |
| /* log time */ |
| strm->logs.tv_request = now; |
| |
| /* eat the whole request */ |
| bo_skip(si_oc(si), si_ob(si)->o); |
| res->flags |= CF_READ_NULL; |
| si_shutr(si); |
| return; |
| |
| /* yield. */ |
| case HLUA_E_AGAIN: |
| return; |
| |
| /* finished with error. */ |
| case HLUA_E_ERRMSG: |
| /* Display log. */ |
| SEND_ERR(px, "Lua applet tcp '%s': %s.\n", |
| rule->arg.hlua_rule->fcn.name, lua_tostring(hlua->T, -1)); |
| lua_pop(hlua->T, 1); |
| goto error; |
| |
| case HLUA_E_ERR: |
| /* Display log. */ |
| SEND_ERR(px, "Lua applet tcp '%s' return an unknown error.\n", |
| rule->arg.hlua_rule->fcn.name); |
| goto error; |
| |
| default: |
| goto error; |
| } |
| |
| error: |
| |
| /* For all other cases, just close the stream. */ |
| si_shutw(si); |
| si_shutr(si); |
| ctx->ctx.hlua_apptcp.flags |= APPLET_DONE; |
| } |
| |
| static void hlua_applet_tcp_release(struct appctx *ctx) |
| { |
| task_free(ctx->ctx.hlua_apptcp.task); |
| ctx->ctx.hlua_apptcp.task = NULL; |
| hlua_ctx_destroy(&ctx->ctx.hlua_apptcp.hlua); |
| } |
| |
| /* The function returns 1 if the initialisation is complete, 0 if |
| * an errors occurs and -1 if more data are required for initializing |
| * the applet. |
| */ |
| static int hlua_applet_http_init(struct appctx *ctx, struct proxy *px, struct stream *strm) |
| { |
| struct stream_interface *si = ctx->owner; |
| struct channel *req = si_oc(si); |
| struct http_msg *msg; |
| struct http_txn *txn; |
| struct hlua *hlua = &ctx->ctx.hlua_apphttp.hlua; |
| char **arg; |
| struct hdr_ctx hdr; |
| struct task *task; |
| struct sample smp; /* just used for a valid call to smp_prefetch_http. */ |
| |
| /* Wait for a full HTTP request. */ |
| if (!smp_prefetch_http(px, strm, 0, NULL, &smp, 0)) { |
| if (smp.flags & SMP_F_MAY_CHANGE) |
| return -1; |
| return 0; |
| } |
| txn = strm->txn; |
| msg = &txn->req; |
| |
| /* We want two things in HTTP mode : |
| * - enforce server-close mode if we were in keep-alive, so that the |
| * applet is released after each response ; |
| * - enable request body transfer to the applet in order to resync |
| * with the response body. |
| */ |
| if ((txn->flags & TX_CON_WANT_MSK) == TX_CON_WANT_KAL) |
| txn->flags = (txn->flags & ~TX_CON_WANT_MSK) | TX_CON_WANT_SCL; |
| req->analysers |= AN_REQ_HTTP_XFER_BODY; |
| |
| HLUA_INIT(hlua); |
| ctx->ctx.hlua_apphttp.left_bytes = -1; |
| ctx->ctx.hlua_apphttp.flags = 0; |
| |
| if (txn->req.flags & HTTP_MSGF_VER_11) |
| ctx->ctx.hlua_apphttp.flags |= APPLET_HTTP11; |
| |
| /* Create task used by signal to wakeup applets. */ |
| task = task_new(); |
| if (!task) { |
| SEND_ERR(px, "Lua applet http '%s': out of memory.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| return 0; |
| } |
| task->nice = 0; |
| task->context = ctx; |
| task->process = hlua_applet_wakeup; |
| ctx->ctx.hlua_apphttp.task = task; |
| |
| /* In the execution wrappers linked with a stream, the |
| * Lua context can be not initialized. This behavior |
| * permits to save performances because a systematic |
| * Lua initialization cause 5% performances loss. |
| */ |
| if (!hlua_ctx_init(hlua, task)) { |
| SEND_ERR(px, "Lua applet http '%s': can't initialize Lua context.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| return 0; |
| } |
| |
| /* Set timeout according with the applet configuration. */ |
| hlua->max_time = ctx->applet->timeout; |
| |
| /* The following Lua calls can fail. */ |
| if (!SET_SAFE_LJMP(hlua->T)) { |
| SEND_ERR(px, "Lua applet http '%s': critical error.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| return 0; |
| } |
| |
| /* Check stack available size. */ |
| if (!lua_checkstack(hlua->T, 1)) { |
| SEND_ERR(px, "Lua applet http '%s': full stack.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(hlua->T); |
| return 0; |
| } |
| |
| /* Restore the function in the stack. */ |
| lua_rawgeti(hlua->T, LUA_REGISTRYINDEX, ctx->rule->arg.hlua_rule->fcn.function_ref); |
| |
| /* Create and and push object stream in the stack. */ |
| if (!hlua_applet_http_new(hlua->T, ctx)) { |
| SEND_ERR(px, "Lua applet http '%s': full stack.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(hlua->T); |
| return 0; |
| } |
| hlua->nargs = 1; |
| |
| /* Look for a 100-continue expected. */ |
| if (msg->flags & HTTP_MSGF_VER_11) { |
| hdr.idx = 0; |
| if (http_find_header2("Expect", 6, req->buf->p, &txn->hdr_idx, &hdr) && |
| unlikely(hdr.vlen == 12 && strncasecmp(hdr.line+hdr.val, "100-continue", 12) == 0)) |
| ctx->ctx.hlua_apphttp.flags |= APPLET_100C; |
| } |
| |
| /* push keywords in the stack. */ |
| for (arg = ctx->rule->arg.hlua_rule->args; arg && *arg; arg++) { |
| if (!lua_checkstack(hlua->T, 1)) { |
| SEND_ERR(px, "Lua applet http '%s': full stack.\n", |
| ctx->rule->arg.hlua_rule->fcn.name); |
| RESET_SAFE_LJMP(hlua->T); |
| return 0; |
| } |
| lua_pushstring(hlua->T, *arg); |
| hlua->nargs++; |
| } |
| |
| RESET_SAFE_LJMP(hlua->T); |
| |
| /* Wakeup the applet when data is ready for read. */ |
| si_applet_cant_get(si); |
| |
| return 1; |
| } |
| |
| static void hlua_applet_http_fct(struct appctx *ctx) |
| { |
| struct stream_interface *si = ctx->owner; |
| struct stream *strm = si_strm(si); |
| struct channel *res = si_ic(si); |
| struct channel *req = si_oc(si); |
| struct act_rule *rule = ctx->rule; |
| struct proxy *px = strm->be; |
| struct hlua *hlua = &ctx->ctx.hlua_apphttp.hlua; |
| char *blk1; |
| int len1; |
| char *blk2; |
| int len2; |
| int ret; |
| |
| /* If the stream is disconnect or closed, ldo nothing. */ |
| if (unlikely(si->state == SI_ST_DIS || si->state == SI_ST_CLO)) |
| return; |
| |
| /* Set the currently running flag. */ |
| if (!HLUA_IS_RUNNING(hlua) && |
| !(ctx->ctx.hlua_apphttp.flags & APPLET_DONE)) { |
| |
| /* enable the minimally required analyzers to handle keep-alive |
| * and compression on the HTTP response |
| */ |
| req->analysers = (req->analysers & AN_REQ_HTTP_BODY) | |
| AN_REQ_HTTP_XFER_BODY | AN_REQ_HTTP_INNER; |
| |
| /* Wait for full HTTP analysys. */ |
| if (unlikely(strm->txn->req.msg_state < HTTP_MSG_BODY)) { |
| si_applet_cant_get(si); |
| return; |
| } |
| |
| /* Store the max amount of bytes that we can read. */ |
| ctx->ctx.hlua_apphttp.left_bytes = strm->txn->req.body_len; |
| |
| /* We need to flush the request header. This left the body |
| * for the Lua. |
| */ |
| |
| /* Read the maximum amount of data avalaible. */ |
| ret = bo_getblk_nc(si_oc(si), &blk1, &len1, &blk2, &len2); |
| if (ret == -1) |
| return; |
| |
| /* No data available, ask for more data. */ |
| if (ret == 1) |
| len2 = 0; |
| if (ret == 0) |
| len1 = 0; |
| if (len1 + len2 < strm->txn->req.eoh + 2) { |
| si_applet_cant_get(si); |
| return; |
| } |
| |
| /* skip the requests bytes. */ |
| bo_skip(si_oc(si), strm->txn->req.eoh + 2); |
| } |
| |
| /* Executes The applet if it is not done. */ |
| if (!(ctx->ctx.hlua_apphttp.flags & APPLET_DONE)) { |
| |
| /* Execute the function. */ |
| switch (hlua_ctx_resume(hlua, 1)) { |
| /* finished. */ |
| case HLUA_E_OK: |
| ctx->ctx.hlua_apphttp.flags |= APPLET_DONE; |
| break; |
| |
| /* yield. */ |
| case HLUA_E_AGAIN: |
| return; |
| |
| /* finished with error. */ |
| case HLUA_E_ERRMSG: |
| /* Display log. */ |
| SEND_ERR(px, "Lua applet http '%s': %s.\n", |
| rule->arg.hlua_rule->fcn.name, lua_tostring(hlua->T, -1)); |
| lua_pop(hlua->T, 1); |
| goto error; |
| |
| case HLUA_E_ERR: |
| /* Display log. */ |
| SEND_ERR(px, "Lua applet http '%s' return an unknown error.\n", |
| rule->arg.hlua_rule->fcn.name); |
| goto error; |
| |
| default: |
| goto error; |
| } |
| } |
| |
| if (ctx->ctx.hlua_apphttp.flags & APPLET_DONE) { |
| |
| /* We must send the final chunk. */ |
| if (ctx->ctx.hlua_apphttp.flags & APPLET_CHUNKED && |
| !(ctx->ctx.hlua_apphttp.flags & APPLET_LAST_CHK)) { |
| |
| /* sent last chunk at once. */ |
| ret = bi_putblk(res, "0\r\n\r\n", 5); |
| |
| /* critical error. */ |
| if (ret == -2 || ret == -3) { |
| SEND_ERR(px, "Lua applet http '%s'cannont send last chunk.\n", |
| rule->arg.hlua_rule->fcn.name); |
| goto error; |
| } |
| |
| /* no enough space error. */ |
| if (ret == -1) { |
| si_applet_cant_put(si); |
| return; |
| } |
| |
| /* set the last chunk sent. */ |
| ctx->ctx.hlua_apphttp.flags |= APPLET_LAST_CHK; |
| } |
| |
| /* close the connection. */ |
| |
| /* status / log */ |
| strm->txn->status = ctx->ctx.hlua_apphttp.status; |
| strm->logs.tv_request = now; |
| |
| /* eat the whole request */ |
| bo_skip(si_oc(si), si_ob(si)->o); |
| res->flags |= CF_READ_NULL; |
| si_shutr(si); |
| |
| return; |
| } |
| |
| error: |
| |
| /* If we are in HTTP mode, and we are not send any |
| * data, return a 500 server error in best effort: |
| * if there are no room avalaible in the buffer, |
| * just close the connection. |
| */ |
| bi_putblk(res, error_500, strlen(error_500)); |
| if (!(strm->flags & SF_ERR_MASK)) |
| strm->flags |= SF_ERR_RESOURCE; |
| si_shutw(si); |
| si_shutr(si); |
| ctx->ctx.hlua_apphttp.flags |= APPLET_DONE; |
| } |
| |
| static void hlua_applet_http_release(struct appctx *ctx) |
| { |
| task_free(ctx->ctx.hlua_apphttp.task); |
| ctx->ctx.hlua_apphttp.task = NULL; |
| hlua_ctx_destroy(&ctx->ctx.hlua_apphttp.hlua); |
| } |
| |
| /* global {tcp|http}-request parser. Return ACT_RET_PRS_OK in |
| * succes case, else return ACT_RET_PRS_ERR. |
| * |
| * This function can fail with an abort() due to an Lua critical error. |
| * We are in the configuration parsing process of HAProxy, this abort() is |
| * tolerated. |
| */ |
| static enum act_parse_ret action_register_lua(const char **args, int *cur_arg, struct proxy *px, |
| struct act_rule *rule, char **err) |
| { |
| struct hlua_function *fcn = (struct hlua_function *)rule->kw->private; |
| |
| /* Memory for the rule. */ |
| rule->arg.hlua_rule = calloc(1, sizeof(*rule->arg.hlua_rule)); |
| if (!rule->arg.hlua_rule) { |
| memprintf(err, "out of memory error"); |
| return ACT_RET_PRS_ERR; |
| } |
| |
| /* Reference the Lua function and store the reference. */ |
| rule->arg.hlua_rule->fcn = *fcn; |
| |
| /* TODO: later accept arguments. */ |
| rule->arg.hlua_rule->args = NULL; |
| |
| rule->action = ACT_CUSTOM; |
| rule->action_ptr = hlua_action; |
| return ACT_RET_PRS_OK; |
| } |
| |
| static enum act_parse_ret action_register_service_http(const char **args, int *cur_arg, struct proxy *px, |
| struct act_rule *rule, char **err) |
| { |
| struct hlua_function *fcn = (struct hlua_function *)rule->kw->private; |
| |
| /* HTTP applets are forbidden in tcp-request rules. |
| * HTTP applet request requires everything initilized by |
| * "http_process_request" (analyzer flag AN_REQ_HTTP_INNER). |
| * The applet will be immediately initilized, but its before |
| * the call of this analyzer. |
| */ |
| if (rule->from != ACT_F_HTTP_REQ) { |
| memprintf(err, "HTTP applets are forbidden from 'tcp-request' rulesets"); |
| return ACT_RET_PRS_ERR; |
| } |
| |
| /* Memory for the rule. */ |
| rule->arg.hlua_rule = calloc(1, sizeof(*rule->arg.hlua_rule)); |
| if (!rule->arg.hlua_rule) { |
| memprintf(err, "out of memory error"); |
| return ACT_RET_PRS_ERR; |
| } |
| |
| /* Reference the Lua function and store the reference. */ |
| rule->arg.hlua_rule->fcn = *fcn; |
| |
| /* TODO: later accept arguments. */ |
| rule->arg.hlua_rule->args = NULL; |
| |
| /* Add applet pointer in the rule. */ |
| rule->applet.obj_type = OBJ_TYPE_APPLET; |
| rule->applet.name = fcn->name; |
| rule->applet.init = hlua_applet_http_init; |
| rule->applet.fct = hlua_applet_http_fct; |
| rule->applet.release = hlua_applet_http_release; |
| rule->applet.timeout = hlua_timeout_applet; |
| |
| return ACT_RET_PRS_OK; |
| } |
| |
| /* This function is an LUA binding used for registering |
| * "sample-conv" functions. It expects a converter name used |
| * in the haproxy configuration file, and an LUA function. |
| */ |
| __LJMP static int hlua_register_action(lua_State *L) |
| { |
| struct action_kw_list *akl; |
| const char *name; |
| int ref; |
| int len; |
| struct hlua_function *fcn; |
| |
| MAY_LJMP(check_args(L, 3, "register_service")); |
| |
| /* First argument : converter name. */ |
| name = MAY_LJMP(luaL_checkstring(L, 1)); |
| |
| /* Second argument : environment. */ |
| if (lua_type(L, 2) != LUA_TTABLE) |
| WILL_LJMP(luaL_error(L, "register_action: second argument must be a table of strings")); |
| |
| /* Third argument : lua function. */ |
| ref = MAY_LJMP(hlua_checkfunction(L, 3)); |
| |
| /* browse the second argulent as an array. */ |
| lua_pushnil(L); |
| while (lua_next(L, 2) != 0) { |
| if (lua_type(L, -1) != LUA_TSTRING) |
| WILL_LJMP(luaL_error(L, "register_action: second argument must be a table of strings")); |
| |
| /* Check required environment. Only accepted "http" or "tcp". */ |
| /* Allocate and fill the sample fetch keyword struct. */ |
| akl = calloc(1, sizeof(*akl) + sizeof(struct action_kw) * 2); |
| if (!akl) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| fcn = calloc(1, sizeof(*fcn)); |
| if (!fcn) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| /* Fill fcn. */ |
| fcn->name = strdup(name); |
| if (!fcn->name) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| fcn->function_ref = ref; |
| |
| /* List head */ |
| akl->list.n = akl->list.p = NULL; |
| |
| /* action keyword. */ |
| len = strlen("lua.") + strlen(name) + 1; |
| akl->kw[0].kw = calloc(1, len); |
| if (!akl->kw[0].kw) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| snprintf((char *)akl->kw[0].kw, len, "lua.%s", name); |
| |
| akl->kw[0].match_pfx = 0; |
| akl->kw[0].private = fcn; |
| akl->kw[0].parse = action_register_lua; |
| |
| /* select the action registering point. */ |
| if (strcmp(lua_tostring(L, -1), "tcp-req") == 0) |
| tcp_req_cont_keywords_register(akl); |
| else if (strcmp(lua_tostring(L, -1), "tcp-res") == 0) |
| tcp_res_cont_keywords_register(akl); |
| else if (strcmp(lua_tostring(L, -1), "http-req") == 0) |
| http_req_keywords_register(akl); |
| else if (strcmp(lua_tostring(L, -1), "http-res") == 0) |
| http_res_keywords_register(akl); |
| else |
| WILL_LJMP(luaL_error(L, "lua action environment '%s' is unknown. " |
| "'tcp-req', 'tcp-res', 'http-req' or 'http-res' " |
| "are expected.", lua_tostring(L, -1))); |
| |
| /* pop the environment string. */ |
| lua_pop(L, 1); |
| } |
| return ACT_RET_PRS_OK; |
| } |
| |
| static enum act_parse_ret action_register_service_tcp(const char **args, int *cur_arg, struct proxy *px, |
| struct act_rule *rule, char **err) |
| { |
| struct hlua_function *fcn = (struct hlua_function *)rule->kw->private; |
| |
| /* Memory for the rule. */ |
| rule->arg.hlua_rule = calloc(1, sizeof(*rule->arg.hlua_rule)); |
| if (!rule->arg.hlua_rule) { |
| memprintf(err, "out of memory error"); |
| return ACT_RET_PRS_ERR; |
| } |
| |
| /* Reference the Lua function and store the reference. */ |
| rule->arg.hlua_rule->fcn = *fcn; |
| |
| /* TODO: later accept arguments. */ |
| rule->arg.hlua_rule->args = NULL; |
| |
| /* Add applet pointer in the rule. */ |
| rule->applet.obj_type = OBJ_TYPE_APPLET; |
| rule->applet.name = fcn->name; |
| rule->applet.init = hlua_applet_tcp_init; |
| rule->applet.fct = hlua_applet_tcp_fct; |
| rule->applet.release = hlua_applet_tcp_release; |
| rule->applet.timeout = hlua_timeout_applet; |
| |
| return 0; |
| } |
| |
| /* This function is an LUA binding used for registering |
| * "sample-conv" functions. It expects a converter name used |
| * in the haproxy configuration file, and an LUA function. |
| */ |
| __LJMP static int hlua_register_service(lua_State *L) |
| { |
| struct action_kw_list *akl; |
| const char *name; |
| const char *env; |
| int ref; |
| int len; |
| struct hlua_function *fcn; |
| |
| MAY_LJMP(check_args(L, 3, "register_service")); |
| |
| /* First argument : converter name. */ |
| name = MAY_LJMP(luaL_checkstring(L, 1)); |
| |
| /* Second argument : environment. */ |
| env = MAY_LJMP(luaL_checkstring(L, 2)); |
| |
| /* Third argument : lua function. */ |
| ref = MAY_LJMP(hlua_checkfunction(L, 3)); |
| |
| /* Check required environment. Only accepted "http" or "tcp". */ |
| /* Allocate and fill the sample fetch keyword struct. */ |
| akl = calloc(1, sizeof(*akl) + sizeof(struct action_kw) * 2); |
| if (!akl) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| fcn = calloc(1, sizeof(*fcn)); |
| if (!fcn) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| /* Fill fcn. */ |
| len = strlen("<lua.>") + strlen(name) + 1; |
| fcn->name = calloc(1, len); |
| if (!fcn->name) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| snprintf((char *)fcn->name, len, "<lua.%s>", name); |
| fcn->function_ref = ref; |
| |
| /* List head */ |
| akl->list.n = akl->list.p = NULL; |
| |
| /* converter keyword. */ |
| len = strlen("lua.") + strlen(name) + 1; |
| akl->kw[0].kw = calloc(1, len); |
| if (!akl->kw[0].kw) |
| WILL_LJMP(luaL_error(L, "lua out of memory error.")); |
| |
| snprintf((char *)akl->kw[0].kw, len, "lua.%s", name); |
| |
| if (strcmp(env, "tcp") == 0) |
| akl->kw[0].parse = action_register_service_tcp; |
| else if (strcmp(env, "http") == 0) |
| akl->kw[0].parse = action_register_service_http; |
| else |
| WILL_LJMP(luaL_error(L, "lua service environment '%s' is unknown. " |
| "'tcp' or 'http' are expected.")); |
| |
| akl->kw[0].match_pfx = 0; |
| akl->kw[0].private = fcn; |
| |
| /* End of array. */ |
| memset(&akl->kw[1], 0, sizeof(*akl->kw)); |
| |
| /* Register this new converter */ |
| service_keywords_register(akl); |
| |
| return 0; |
| } |
| |
| static int hlua_read_timeout(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err, unsigned int *timeout) |
| { |
| const char *error; |
| |
| error = parse_time_err(args[1], timeout, TIME_UNIT_MS); |
| if (error && *error != '\0') { |
| memprintf(err, "%s: invalid timeout", args[0]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int hlua_session_timeout(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| return hlua_read_timeout(args, section_type, curpx, defpx, |
| file, line, err, &hlua_timeout_session); |
| } |
| |
| static int hlua_task_timeout(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| return hlua_read_timeout(args, section_type, curpx, defpx, |
| file, line, err, &hlua_timeout_task); |
| } |
| |
| static int hlua_applet_timeout(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| return hlua_read_timeout(args, section_type, curpx, defpx, |
| file, line, err, &hlua_timeout_applet); |
| } |
| |
| static int hlua_forced_yield(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| char *error; |
| |
| hlua_nb_instruction = strtoll(args[1], &error, 10); |
| if (*error != '\0') { |
| memprintf(err, "%s: invalid number", args[0]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int hlua_parse_maxmem(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| char *error; |
| |
| if (*(args[1]) == 0) { |
| memprintf(err, "'%s' expects an integer argument (Lua memory size in MB).\n", args[0]); |
| return -1; |
| } |
| hlua_global_allocator.limit = strtoll(args[1], &error, 10) * 1024L * 1024L; |
| if (*error != '\0') { |
| memprintf(err, "%s: invalid number %s (error at '%c')", args[0], args[1], *error); |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| /* This function is called by the main configuration key "lua-load". It loads and |
| * execute an lua file during the parsing of the HAProxy configuration file. It is |
| * the main lua entry point. |
| * |
| * This funtion runs with the HAProxy keywords API. It returns -1 if an error is |
| * occured, otherwise it returns 0. |
| * |
| * In some error case, LUA set an error message in top of the stack. This function |
| * returns this error message in the HAProxy logs and pop it from the stack. |
| * |
| * This function can fail with an abort() due to an Lua critical error. |
| * We are in the configuration parsing process of HAProxy, this abort() is |
| * tolerated. |
| */ |
| static int hlua_load(char **args, int section_type, struct proxy *curpx, |
| struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| int error; |
| |
| /* Just load and compile the file. */ |
| error = luaL_loadfile(gL.T, args[1]); |
| if (error) { |
| memprintf(err, "error in lua file '%s': %s", args[1], lua_tostring(gL.T, -1)); |
| lua_pop(gL.T, 1); |
| return -1; |
| } |
| |
| /* If no syntax error where detected, execute the code. */ |
| error = lua_pcall(gL.T, 0, LUA_MULTRET, 0); |
| switch (error) { |
| case LUA_OK: |
| break; |
| case LUA_ERRRUN: |
| memprintf(err, "lua runtime error: %s\n", lua_tostring(gL.T, -1)); |
| lua_pop(gL.T, 1); |
| return -1; |
| case LUA_ERRMEM: |
| memprintf(err, "lua out of memory error\n"); |
| return -1; |
| case LUA_ERRERR: |
| memprintf(err, "lua message handler error: %s\n", lua_tostring(gL.T, -1)); |
| lua_pop(gL.T, 1); |
| return -1; |
| case LUA_ERRGCMM: |
| memprintf(err, "lua garbage collector error: %s\n", lua_tostring(gL.T, -1)); |
| lua_pop(gL.T, 1); |
| return -1; |
| default: |
| memprintf(err, "lua unknonwn error: %s\n", lua_tostring(gL.T, -1)); |
| lua_pop(gL.T, 1); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* configuration keywords declaration */ |
| static struct cfg_kw_list cfg_kws = {{ },{ |
| { CFG_GLOBAL, "lua-load", hlua_load }, |
| { CFG_GLOBAL, "tune.lua.session-timeout", hlua_session_timeout }, |
| { CFG_GLOBAL, "tune.lua.task-timeout", hlua_task_timeout }, |
| { CFG_GLOBAL, "tune.lua.service-timeout", hlua_applet_timeout }, |
| { CFG_GLOBAL, "tune.lua.forced-yield", hlua_forced_yield }, |
| { CFG_GLOBAL, "tune.lua.maxmem", hlua_parse_maxmem }, |
| { 0, NULL, NULL }, |
| }}; |
| |
| /* This function can fail with an abort() due to an Lua critical error. |
| * We are in the initialisation process of HAProxy, this abort() is |
| * tolerated. |
| */ |
| int hlua_post_init() |
| { |
| struct hlua_init_function *init; |
| const char *msg; |
| enum hlua_exec ret; |
| |
| list_for_each_entry(init, &hlua_init_functions, l) { |
| lua_rawgeti(gL.T, LUA_REGISTRYINDEX, init->function_ref); |
| ret = hlua_ctx_resume(&gL, 0); |
| switch (ret) { |
| case HLUA_E_OK: |
| lua_pop(gL.T, -1); |
| return 1; |
| case HLUA_E_AGAIN: |
| Alert("lua init: yield not allowed.\n"); |
| return 0; |
| case HLUA_E_ERRMSG: |
| msg = lua_tostring(gL.T, -1); |
| Alert("lua init: %s.\n", msg); |
| return 0; |
| case HLUA_E_ERR: |
| default: |
| Alert("lua init: unknown runtime error.\n"); |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| /* The memory allocator used by the Lua stack. <ud> is a pointer to the |
| * allocator's context. <ptr> is the pointer to alloc/free/realloc. <osize> |
| * is the previously allocated size or the kind of object in case of a new |
| * allocation. <nsize> is the requested new size. |
| */ |
| static void *hlua_alloc(void *ud, void *ptr, size_t osize, size_t nsize) |
| { |
| struct hlua_mem_allocator *zone = ud; |
| |
| if (nsize == 0) { |
| /* it's a free */ |
| if (ptr) |
| zone->allocated -= osize; |
| free(ptr); |
| return NULL; |
| } |
| |
| if (!ptr) { |
| /* it's a new allocation */ |
| if (zone->limit && zone->allocated + nsize > zone->limit) |
| return NULL; |
| |
| ptr = malloc(nsize); |
| if (ptr) |
| zone->allocated += nsize; |
| return ptr; |
| } |
| |
| /* it's a realloc */ |
| if (zone->limit && zone->allocated + nsize - osize > zone->limit) |
| return NULL; |
| |
| ptr = realloc(ptr, nsize); |
| if (ptr) |
| zone->allocated += nsize - osize; |
| return ptr; |
| } |
| |
| /* Ithis function can fail with an abort() due to an Lua critical error. |
| * We are in the initialisation process of HAProxy, this abort() is |
| * tolerated. |
| */ |
| void hlua_init(void) |
| { |
| int i; |
| int idx; |
| struct sample_fetch *sf; |
| struct sample_conv *sc; |
| char *p; |
| #ifdef USE_OPENSSL |
| struct srv_kw *kw; |
| int tmp_error; |
| char *error; |
| char *args[] = { /* SSL client configuration. */ |
| "ssl", |
| "verify", |
| "none", |
| NULL |
| }; |
| #endif |
| |
| /* Initialise com signals pool */ |
| pool2_hlua_com = create_pool("hlua_com", sizeof(struct hlua_com), MEM_F_SHARED); |
| |
| /* Register configuration keywords. */ |
| cfg_register_keywords(&cfg_kws); |
| |
| /* Init main lua stack. */ |
| gL.Mref = LUA_REFNIL; |
| gL.flags = 0; |
| LIST_INIT(&gL.com); |
| gL.T = luaL_newstate(); |
| hlua_sethlua(&gL); |
| gL.Tref = LUA_REFNIL; |
| gL.task = NULL; |
| |
| /* From this point, until the end of the initialisation fucntion, |
| * the Lua function can fail with an abort. We are in the initialisation |
| * process of HAProxy, this abort() is tolerated. |
| */ |
| |
| /* change the memory allocators to track memory usage */ |
| lua_setallocf(gL.T, hlua_alloc, &hlua_global_allocator); |
| |
| /* Initialise lua. */ |
| luaL_openlibs(gL.T); |
| |
| /* |
| * |
| * Create "core" object. |
| * |
| */ |
| |
| /* This table entry is the object "core" base. */ |
| lua_newtable(gL.T); |
| |
| /* Push the loglevel constants. */ |
| for (i = 0; i < NB_LOG_LEVELS; i++) |
| hlua_class_const_int(gL.T, log_levels[i], i); |
| |
| /* Register special functions. */ |
| hlua_class_function(gL.T, "register_init", hlua_register_init); |
| hlua_class_function(gL.T, "register_task", hlua_register_task); |
| hlua_class_function(gL.T, "register_fetches", hlua_register_fetches); |
| hlua_class_function(gL.T, "register_converters", hlua_register_converters); |
| hlua_class_function(gL.T, "register_action", hlua_register_action); |
| hlua_class_function(gL.T, "register_service", hlua_register_service); |
| hlua_class_function(gL.T, "yield", hlua_yield); |
| hlua_class_function(gL.T, "set_nice", hlua_set_nice); |
| hlua_class_function(gL.T, "sleep", hlua_sleep); |
| hlua_class_function(gL.T, "msleep", hlua_msleep); |
| hlua_class_function(gL.T, "add_acl", hlua_add_acl); |
| hlua_class_function(gL.T, "del_acl", hlua_del_acl); |
| hlua_class_function(gL.T, "set_map", hlua_set_map); |
| hlua_class_function(gL.T, "del_map", hlua_del_map); |
| hlua_class_function(gL.T, "tcp", hlua_socket_new); |
| hlua_class_function(gL.T, "log", hlua_log); |
| hlua_class_function(gL.T, "Debug", hlua_log_debug); |
| hlua_class_function(gL.T, "Info", hlua_log_info); |
| hlua_class_function(gL.T, "Warning", hlua_log_warning); |
| hlua_class_function(gL.T, "Alert", hlua_log_alert); |
| hlua_class_function(gL.T, "done", hlua_done); |
| |
| lua_setglobal(gL.T, "core"); |
| |
| /* |
| * |
| * Register class Map |
| * |
| */ |
| |
| /* This table entry is the object "Map" base. */ |
| lua_newtable(gL.T); |
| |
| /* register pattern types. */ |
| for (i=0; i<PAT_MATCH_NUM; i++) |
| hlua_class_const_int(gL.T, pat_match_names[i], i); |
| |
| /* register constructor. */ |
| hlua_class_function(gL.T, "new", hlua_map_new); |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_MAP); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fille the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| /* Register . */ |
| hlua_class_function(gL.T, "lookup", hlua_map_lookup); |
| hlua_class_function(gL.T, "slookup", hlua_map_slookup); |
| |
| lua_rawset(gL.T, -3); |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_MAP); /* register class session. */ |
| class_map_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class session. */ |
| |
| /* Assign the metatable to the mai Map object. */ |
| lua_setmetatable(gL.T, -2); |
| |
| /* Set a name to the table. */ |
| lua_setglobal(gL.T, "Map"); |
| |
| /* |
| * |
| * Register class Channel |
| * |
| */ |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_CHANNEL); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fille the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| /* Register . */ |
| hlua_class_function(gL.T, "get", hlua_channel_get); |
| hlua_class_function(gL.T, "dup", hlua_channel_dup); |
| hlua_class_function(gL.T, "getline", hlua_channel_getline); |
| hlua_class_function(gL.T, "set", hlua_channel_set); |
| hlua_class_function(gL.T, "append", hlua_channel_append); |
| hlua_class_function(gL.T, "send", hlua_channel_send); |
| hlua_class_function(gL.T, "forward", hlua_channel_forward); |
| hlua_class_function(gL.T, "get_in_len", hlua_channel_get_in_len); |
| hlua_class_function(gL.T, "get_out_len", hlua_channel_get_out_len); |
| |
| lua_rawset(gL.T, -3); |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_CHANNEL); /* register class session. */ |
| class_channel_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class session. */ |
| |
| /* |
| * |
| * Register class Fetches |
| * |
| */ |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_FETCHES); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fille the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| /* Browse existing fetches and create the associated |
| * object method. |
| */ |
| sf = NULL; |
| while ((sf = sample_fetch_getnext(sf, &idx)) != NULL) { |
| |
| /* Dont register the keywork if the arguments check function are |
| * not safe during the runtime. |
| */ |
| if ((sf->val_args != NULL) && |
| (sf->val_args != val_payload_lv) && |
| (sf->val_args != val_hdr)) |
| continue; |
| |
| /* gL.Tua doesn't support '.' and '-' in the function names, replace it |
| * by an underscore. |
| */ |
| strncpy(trash.str, sf->kw, trash.size); |
| trash.str[trash.size - 1] = '\0'; |
| for (p = trash.str; *p; p++) |
| if (*p == '.' || *p == '-' || *p == '+') |
| *p = '_'; |
| |
| /* Register the function. */ |
| lua_pushstring(gL.T, trash.str); |
| lua_pushlightuserdata(gL.T, sf); |
| lua_pushcclosure(gL.T, hlua_run_sample_fetch, 1); |
| lua_rawset(gL.T, -3); |
| } |
| |
| lua_rawset(gL.T, -3); |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_FETCHES); /* register class session. */ |
| class_fetches_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class session. */ |
| |
| /* |
| * |
| * Register class Converters |
| * |
| */ |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_CONVERTERS); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fill the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| /* Browse existing converters and create the associated |
| * object method. |
| */ |
| sc = NULL; |
| while ((sc = sample_conv_getnext(sc, &idx)) != NULL) { |
| /* Dont register the keywork if the arguments check function are |
| * not safe during the runtime. |
| */ |
| if (sc->val_args != NULL) |
| continue; |
| |
| /* gL.Tua doesn't support '.' and '-' in the function names, replace it |
| * by an underscore. |
| */ |
| strncpy(trash.str, sc->kw, trash.size); |
| trash.str[trash.size - 1] = '\0'; |
| for (p = trash.str; *p; p++) |
| if (*p == '.' || *p == '-' || *p == '+') |
| *p = '_'; |
| |
| /* Register the function. */ |
| lua_pushstring(gL.T, trash.str); |
| lua_pushlightuserdata(gL.T, sc); |
| lua_pushcclosure(gL.T, hlua_run_sample_conv, 1); |
| lua_rawset(gL.T, -3); |
| } |
| |
| lua_rawset(gL.T, -3); |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_CONVERTERS); /* register class session. */ |
| class_converters_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class session. */ |
| |
| /* |
| * |
| * Register class HTTP |
| * |
| */ |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_HTTP); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fille the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| /* Register Lua functions. */ |
| hlua_class_function(gL.T, "req_get_headers",hlua_http_req_get_headers); |
| hlua_class_function(gL.T, "req_del_header", hlua_http_req_del_hdr); |
| hlua_class_function(gL.T, "req_rep_header", hlua_http_req_rep_hdr); |
| hlua_class_function(gL.T, "req_rep_value", hlua_http_req_rep_val); |
| hlua_class_function(gL.T, "req_add_header", hlua_http_req_add_hdr); |
| hlua_class_function(gL.T, "req_set_header", hlua_http_req_set_hdr); |
| hlua_class_function(gL.T, "req_set_method", hlua_http_req_set_meth); |
| hlua_class_function(gL.T, "req_set_path", hlua_http_req_set_path); |
| hlua_class_function(gL.T, "req_set_query", hlua_http_req_set_query); |
| hlua_class_function(gL.T, "req_set_uri", hlua_http_req_set_uri); |
| |
| hlua_class_function(gL.T, "res_get_headers",hlua_http_res_get_headers); |
| hlua_class_function(gL.T, "res_del_header", hlua_http_res_del_hdr); |
| hlua_class_function(gL.T, "res_rep_header", hlua_http_res_rep_hdr); |
| hlua_class_function(gL.T, "res_rep_value", hlua_http_res_rep_val); |
| hlua_class_function(gL.T, "res_add_header", hlua_http_res_add_hdr); |
| hlua_class_function(gL.T, "res_set_header", hlua_http_res_set_hdr); |
| hlua_class_function(gL.T, "res_set_status", hlua_http_res_set_status); |
| |
| lua_rawset(gL.T, -3); |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_HTTP); /* register class session. */ |
| class_http_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class session. */ |
| |
| /* |
| * |
| * Register class AppletTCP |
| * |
| */ |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_APPLET_TCP); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fille the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| /* Register Lua functions. */ |
| hlua_class_function(gL.T, "getline", hlua_applet_tcp_getline); |
| hlua_class_function(gL.T, "receive", hlua_applet_tcp_recv); |
| hlua_class_function(gL.T, "send", hlua_applet_tcp_send); |
| |
| lua_settable(gL.T, -3); |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_APPLET_TCP); /* register class session. */ |
| class_applet_tcp_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class session. */ |
| |
| /* |
| * |
| * Register class AppletHTTP |
| * |
| */ |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_APPLET_HTTP); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fille the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| /* Register Lua functions. */ |
| hlua_class_function(gL.T, "getline", hlua_applet_http_getline); |
| hlua_class_function(gL.T, "receive", hlua_applet_http_recv); |
| hlua_class_function(gL.T, "send", hlua_applet_http_send); |
| hlua_class_function(gL.T, "add_header", hlua_applet_http_addheader); |
| hlua_class_function(gL.T, "set_status", hlua_applet_http_status); |
| hlua_class_function(gL.T, "start_response", hlua_applet_http_start_response); |
| |
| lua_settable(gL.T, -3); |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_APPLET_HTTP); /* register class session. */ |
| class_applet_http_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class session. */ |
| |
| /* |
| * |
| * Register class TXN |
| * |
| */ |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_TXN); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fille the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| /* Register Lua functions. */ |
| hlua_class_function(gL.T, "set_priv", hlua_set_priv); |
| hlua_class_function(gL.T, "get_priv", hlua_get_priv); |
| hlua_class_function(gL.T, "set_var", hlua_set_var); |
| hlua_class_function(gL.T, "get_var", hlua_get_var); |
| hlua_class_function(gL.T, "done", hlua_txn_done); |
| hlua_class_function(gL.T, "set_loglevel",hlua_txn_set_loglevel); |
| hlua_class_function(gL.T, "set_tos", hlua_txn_set_tos); |
| hlua_class_function(gL.T, "set_mark", hlua_txn_set_mark); |
| hlua_class_function(gL.T, "deflog", hlua_txn_deflog); |
| hlua_class_function(gL.T, "log", hlua_txn_log); |
| hlua_class_function(gL.T, "Debug", hlua_txn_log_debug); |
| hlua_class_function(gL.T, "Info", hlua_txn_log_info); |
| hlua_class_function(gL.T, "Warning", hlua_txn_log_warning); |
| hlua_class_function(gL.T, "Alert", hlua_txn_log_alert); |
| |
| lua_rawset(gL.T, -3); |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_TXN); /* register class session. */ |
| class_txn_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class session. */ |
| |
| /* |
| * |
| * Register class Socket |
| * |
| */ |
| |
| /* Create and fill the metatable. */ |
| lua_newtable(gL.T); |
| |
| /* Create the __tostring identifier */ |
| lua_pushstring(gL.T, "__tostring"); |
| lua_pushstring(gL.T, CLASS_SOCKET); |
| lua_pushcclosure(gL.T, hlua_dump_object, 1); |
| lua_rawset(gL.T, -3); |
| |
| /* Create and fille the __index entry. */ |
| lua_pushstring(gL.T, "__index"); |
| lua_newtable(gL.T); |
| |
| #ifdef USE_OPENSSL |
| hlua_class_function(gL.T, "connect_ssl", hlua_socket_connect_ssl); |
| #endif |
| hlua_class_function(gL.T, "connect", hlua_socket_connect); |
| hlua_class_function(gL.T, "send", hlua_socket_send); |
| hlua_class_function(gL.T, "receive", hlua_socket_receive); |
| hlua_class_function(gL.T, "close", hlua_socket_close); |
| hlua_class_function(gL.T, "getpeername", hlua_socket_getpeername); |
| hlua_class_function(gL.T, "getsockname", hlua_socket_getsockname); |
| hlua_class_function(gL.T, "setoption", hlua_socket_setoption); |
| hlua_class_function(gL.T, "settimeout", hlua_socket_settimeout); |
| |
| lua_rawset(gL.T, -3); /* Push the last 2 entries in the table at index -3 */ |
| |
| /* Register the garbage collector entry. */ |
| lua_pushstring(gL.T, "__gc"); |
| lua_pushcclosure(gL.T, hlua_socket_gc, 0); |
| lua_rawset(gL.T, -3); /* Push the last 2 entries in the table at index -3 */ |
| |
| /* Register previous table in the registry with reference and named entry. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_pushvalue(gL.T, -1); /* Copy the -1 entry and push it on the stack. */ |
| lua_setfield(gL.T, LUA_REGISTRYINDEX, CLASS_SOCKET); /* register class socket. */ |
| class_socket_ref = luaL_ref(gL.T, LUA_REGISTRYINDEX); /* reference class socket. */ |
| |
| /* Proxy and server configuration initialisation. */ |
| memset(&socket_proxy, 0, sizeof(socket_proxy)); |
| init_new_proxy(&socket_proxy); |
| socket_proxy.parent = NULL; |
| socket_proxy.last_change = now.tv_sec; |
| socket_proxy.id = "LUA-SOCKET"; |
| socket_proxy.cap = PR_CAP_FE | PR_CAP_BE; |
| socket_proxy.maxconn = 0; |
| socket_proxy.accept = NULL; |
| socket_proxy.options2 |= PR_O2_INDEPSTR; |
| socket_proxy.srv = NULL; |
| socket_proxy.conn_retries = 0; |
| socket_proxy.timeout.connect = 5000; /* By default the timeout connection is 5s. */ |
| |
| /* Init TCP server: unchanged parameters */ |
| memset(&socket_tcp, 0, sizeof(socket_tcp)); |
| socket_tcp.next = NULL; |
| socket_tcp.proxy = &socket_proxy; |
| socket_tcp.obj_type = OBJ_TYPE_SERVER; |
| LIST_INIT(&socket_tcp.actconns); |
| LIST_INIT(&socket_tcp.pendconns); |
| LIST_INIT(&socket_tcp.priv_conns); |
| LIST_INIT(&socket_tcp.idle_conns); |
| LIST_INIT(&socket_tcp.safe_conns); |
| socket_tcp.state = SRV_ST_RUNNING; /* early server setup */ |
| socket_tcp.last_change = 0; |
| socket_tcp.id = "LUA-TCP-CONN"; |
| socket_tcp.check.state &= ~CHK_ST_ENABLED; /* Disable health checks. */ |
| socket_tcp.agent.state &= ~CHK_ST_ENABLED; /* Disable health checks. */ |
| socket_tcp.pp_opts = 0; /* Remove proxy protocol. */ |
| |
| /* XXX: Copy default parameter from default server, |
| * but the default server is not initialized. |
| */ |
| socket_tcp.maxqueue = socket_proxy.defsrv.maxqueue; |
| socket_tcp.minconn = socket_proxy.defsrv.minconn; |
| socket_tcp.maxconn = socket_proxy.defsrv.maxconn; |
| socket_tcp.slowstart = socket_proxy.defsrv.slowstart; |
| socket_tcp.onerror = socket_proxy.defsrv.onerror; |
| socket_tcp.onmarkeddown = socket_proxy.defsrv.onmarkeddown; |
| socket_tcp.onmarkedup = socket_proxy.defsrv.onmarkedup; |
| socket_tcp.consecutive_errors_limit = socket_proxy.defsrv.consecutive_errors_limit; |
| socket_tcp.uweight = socket_proxy.defsrv.iweight; |
| socket_tcp.iweight = socket_proxy.defsrv.iweight; |
| |
| socket_tcp.check.status = HCHK_STATUS_INI; |
| socket_tcp.check.rise = socket_proxy.defsrv.check.rise; |
| socket_tcp.check.fall = socket_proxy.defsrv.check.fall; |
| socket_tcp.check.health = socket_tcp.check.rise; /* socket, but will fall down at first failure */ |
| socket_tcp.check.server = &socket_tcp; |
| |
| socket_tcp.agent.status = HCHK_STATUS_INI; |
| socket_tcp.agent.rise = socket_proxy.defsrv.agent.rise; |
| socket_tcp.agent.fall = socket_proxy.defsrv.agent.fall; |
| socket_tcp.agent.health = socket_tcp.agent.rise; /* socket, but will fall down at first failure */ |
| socket_tcp.agent.server = &socket_tcp; |
| |
| socket_tcp.xprt = &raw_sock; |
| |
| #ifdef USE_OPENSSL |
| /* Init TCP server: unchanged parameters */ |
| memset(&socket_ssl, 0, sizeof(socket_ssl)); |
| socket_ssl.next = NULL; |
| socket_ssl.proxy = &socket_proxy; |
| socket_ssl.obj_type = OBJ_TYPE_SERVER; |
| LIST_INIT(&socket_ssl.actconns); |
| LIST_INIT(&socket_ssl.pendconns); |
| LIST_INIT(&socket_ssl.priv_conns); |
| LIST_INIT(&socket_ssl.idle_conns); |
| LIST_INIT(&socket_ssl.safe_conns); |
| socket_ssl.state = SRV_ST_RUNNING; /* early server setup */ |
| socket_ssl.last_change = 0; |
| socket_ssl.id = "LUA-SSL-CONN"; |
| socket_ssl.check.state &= ~CHK_ST_ENABLED; /* Disable health checks. */ |
| socket_ssl.agent.state &= ~CHK_ST_ENABLED; /* Disable health checks. */ |
| socket_ssl.pp_opts = 0; /* Remove proxy protocol. */ |
| |
| /* XXX: Copy default parameter from default server, |
| * but the default server is not initialized. |
| */ |
| socket_ssl.maxqueue = socket_proxy.defsrv.maxqueue; |
| socket_ssl.minconn = socket_proxy.defsrv.minconn; |
| socket_ssl.maxconn = socket_proxy.defsrv.maxconn; |
| socket_ssl.slowstart = socket_proxy.defsrv.slowstart; |
| socket_ssl.onerror = socket_proxy.defsrv.onerror; |
| socket_ssl.onmarkeddown = socket_proxy.defsrv.onmarkeddown; |
| socket_ssl.onmarkedup = socket_proxy.defsrv.onmarkedup; |
| socket_ssl.consecutive_errors_limit = socket_proxy.defsrv.consecutive_errors_limit; |
| socket_ssl.uweight = socket_proxy.defsrv.iweight; |
| socket_ssl.iweight = socket_proxy.defsrv.iweight; |
| |
| socket_ssl.check.status = HCHK_STATUS_INI; |
| socket_ssl.check.rise = socket_proxy.defsrv.check.rise; |
| socket_ssl.check.fall = socket_proxy.defsrv.check.fall; |
| socket_ssl.check.health = socket_ssl.check.rise; /* socket, but will fall down at first failure */ |
| socket_ssl.check.server = &socket_ssl; |
| |
| socket_ssl.agent.status = HCHK_STATUS_INI; |
| socket_ssl.agent.rise = socket_proxy.defsrv.agent.rise; |
| socket_ssl.agent.fall = socket_proxy.defsrv.agent.fall; |
| socket_ssl.agent.health = socket_ssl.agent.rise; /* socket, but will fall down at first failure */ |
| socket_ssl.agent.server = &socket_ssl; |
| |
| socket_ssl.use_ssl = 1; |
| socket_ssl.xprt = &ssl_sock; |
| |
| for (idx = 0; args[idx] != NULL; idx++) { |
| if ((kw = srv_find_kw(args[idx])) != NULL) { /* Maybe it's registered server keyword */ |
| /* |
| * |
| * If the keyword is not known, we can search in the registered |
| * server keywords. This is usefull to configure special SSL |
| * features like client certificates and ssl_verify. |
| * |
| */ |
| tmp_error = kw->parse(args, &idx, &socket_proxy, &socket_ssl, &error); |
| if (tmp_error != 0) { |
| fprintf(stderr, "INTERNAL ERROR: %s\n", error); |
| abort(); /* This must be never arrives because the command line |
| not editable by the user. */ |
| } |
| idx += kw->skip; |
| } |
| } |
| |
| /* Initialize SSL server. */ |
| ssl_sock_prepare_srv_ctx(&socket_ssl, &socket_proxy); |
| #endif |
| } |