blob: e046f39276c0ffb6c02e8b3076f1f903f482bc41 [file] [log] [blame]
/*
* include/proto/buffers.h
* Buffer management definitions, macros and inline functions.
*
* Copyright (C) 2000-2009 Willy Tarreau - w@1wt.eu
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation, version 2.1
* exclusively.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _PROTO_BUFFERS_H
#define _PROTO_BUFFERS_H
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <common/config.h>
#include <common/memory.h>
#include <common/ticks.h>
#include <common/time.h>
#include <types/buffers.h>
#include <types/global.h>
extern struct pool_head *pool2_buffer;
/* perform minimal intializations, report 0 in case of error, 1 if OK. */
int init_buffer();
/* Initialize all fields in the buffer. The BF_OUT_EMPTY flags is set. */
static inline void buffer_init(struct buffer *buf)
{
buf->send_max = 0;
buf->to_forward = 0;
buf->l = buf->total = 0;
buf->pipe = NULL;
buf->analysers = 0;
buf->cons = NULL;
buf->flags = BF_OUT_EMPTY;
buf->r = buf->lr = buf->w = buf->data;
}
/* Return the max number of bytes the buffer can contain so that once all the
* pending bytes are forwarded, the buffer still has global.tune.maxrewrite
* bytes free. The result sits between buf->size - maxrewrite and buf->size.
*/
static inline int buffer_max_len(struct buffer *buf)
{
if (buf->to_forward == BUF_INFINITE_FORWARD ||
buf->to_forward + buf->send_max >= global.tune.maxrewrite)
return buf->size;
else
return buf->size - global.tune.maxrewrite + buf->to_forward + buf->send_max;
}
/* Check buffer timeouts, and set the corresponding flags. The
* likely/unlikely have been optimized for fastest normal path.
* The read/write timeouts are not set if there was activity on the buffer.
* That way, we don't have to update the timeout on every I/O. Note that the
* analyser timeout is always checked.
*/
static inline void buffer_check_timeouts(struct buffer *b)
{
if (likely(!(b->flags & (BF_SHUTR|BF_READ_TIMEOUT|BF_READ_ACTIVITY|BF_READ_NOEXP))) &&
unlikely(tick_is_expired(b->rex, now_ms)))
b->flags |= BF_READ_TIMEOUT;
if (likely(!(b->flags & (BF_SHUTW|BF_WRITE_TIMEOUT|BF_WRITE_ACTIVITY))) &&
unlikely(tick_is_expired(b->wex, now_ms)))
b->flags |= BF_WRITE_TIMEOUT;
if (likely(!(b->flags & BF_ANA_TIMEOUT)) &&
unlikely(tick_is_expired(b->analyse_exp, now_ms)))
b->flags |= BF_ANA_TIMEOUT;
}
/* Schedule <bytes> more bytes to be forwarded by the buffer without notifying
* the task. Any pending data in the buffer is scheduled to be sent as well,
* in the limit of the number of bytes to forward. This must be the only method
* to use to schedule bytes to be sent. Directly touching ->to_forward will
* cause lockups when send_max goes down to zero if nobody is ready to push the
* remaining data.
*/
static inline void buffer_forward(struct buffer *buf, unsigned long bytes)
{
unsigned long data_left;
if (!bytes)
return;
data_left = buf->l - buf->send_max;
if (data_left >= bytes) {
buf->send_max += bytes;
buf->flags &= ~BF_OUT_EMPTY;
return;
}
buf->send_max += data_left;
if (buf->send_max)
buf->flags &= ~BF_OUT_EMPTY;
if (buf->to_forward != BUF_INFINITE_FORWARD) {
buf->to_forward += bytes - data_left;
if (bytes == BUF_INFINITE_FORWARD)
buf->to_forward = bytes;
}
if (buf->l < buffer_max_len(buf))
buf->flags &= ~BF_FULL;
else
buf->flags |= BF_FULL;
}
/* Schedule all remaining buffer data to be sent. send_max is not touched if it
* already covers those data. That permits doing a flush even after a forward,
* although not recommended.
*/
static inline void buffer_flush(struct buffer *buf)
{
if (buf->send_max < buf->l)
buf->send_max = buf->l;
if (buf->send_max)
buf->flags &= ~BF_OUT_EMPTY;
}
/* Erase any content from buffer <buf> and adjusts flags accordingly. Note
* that any spliced data is not affected since we may not have any access to
* it.
*/
static inline void buffer_erase(struct buffer *buf)
{
buf->send_max = 0;
buf->to_forward = 0;
buf->r = buf->lr = buf->w = buf->data;
buf->l = 0;
buf->flags &= ~(BF_FULL | BF_OUT_EMPTY);
if (!buf->pipe)
buf->flags |= BF_OUT_EMPTY;
}
/* Cut the "tail" of the buffer, which means strip it to the length of unsent
* data only, and kill any remaining unsent data. Any scheduled forwarding is
* stopped. This is mainly to be used to send error messages after existing
* data.
*/
static inline void buffer_cut_tail(struct buffer *buf)
{
if (!buf->send_max)
return buffer_erase(buf);
buf->to_forward = 0;
if (buf->l == buf->send_max)
return;
buf->l = buf->send_max;
buf->r = buf->w + buf->l;
if (buf->r >= buf->data + buf->size)
buf->r -= buf->size;
buf->lr = buf->r;
buf->flags &= ~BF_FULL;
if (buf->l >= buffer_max_len(buf))
buf->flags |= BF_FULL;
}
/* Cut the <n> next unsent bytes of the buffer. The caller must ensure that <n>
* is smaller than the actual buffer's length. This is mainly used to remove
* empty lines at the beginning of a request or a response.
*/
static inline void buffer_ignore(struct buffer *buf, int n)
{
buf->l -= n;
buf->w += n;
if (buf->w >= buf->data + buf->size)
buf->w -= buf->size;
buf->flags &= ~BF_FULL;
if (buf->l >= buffer_max_len(buf))
buf->flags |= BF_FULL;
}
/* marks the buffer as "shutdown" ASAP for reads */
static inline void buffer_shutr_now(struct buffer *buf)
{
buf->flags |= BF_SHUTR_NOW;
}
/* marks the buffer as "shutdown" ASAP for writes */
static inline void buffer_shutw_now(struct buffer *buf)
{
buf->flags |= BF_SHUTW_NOW;
}
/* marks the buffer as "shutdown" ASAP in both directions */
static inline void buffer_abort(struct buffer *buf)
{
buf->flags |= BF_SHUTR_NOW | BF_SHUTW_NOW;
}
/* Installs <func> as a hijacker on the buffer <b> for session <s>. The hijack
* flag is set, and the function called once. The function is responsible for
* clearing the hijack bit. It is possible that the function clears the flag
* during this first call.
*/
static inline void buffer_install_hijacker(struct session *s,
struct buffer *b,
void (*func)(struct session *, struct buffer *))
{
b->hijacker = func;
b->flags |= BF_HIJACK;
func(s, b);
}
/* Releases the buffer from hijacking mode. Often used by the hijack function */
static inline void buffer_stop_hijack(struct buffer *buf)
{
buf->flags &= ~BF_HIJACK;
}
/* allow the consumer to try to establish a new connection. */
static inline void buffer_auto_connect(struct buffer *buf)
{
buf->flags |= BF_AUTO_CONNECT;
}
/* prevent the consumer from trying to establish a new connection, and also
* disable auto shutdown forwarding.
*/
static inline void buffer_dont_connect(struct buffer *buf)
{
buf->flags &= ~(BF_AUTO_CONNECT|BF_AUTO_CLOSE);
}
/* allow the producer to forward shutdown requests */
static inline void buffer_auto_close(struct buffer *buf)
{
buf->flags |= BF_AUTO_CLOSE;
}
/* prevent the producer from forwarding shutdown requests */
static inline void buffer_dont_close(struct buffer *buf)
{
buf->flags &= ~BF_AUTO_CLOSE;
}
/* allow the producer to read / poll the input */
static inline void buffer_auto_read(struct buffer *buf)
{
buf->flags &= ~BF_DONT_READ;
}
/* prevent the producer from read / poll the input */
static inline void buffer_dont_read(struct buffer *buf)
{
buf->flags |= BF_DONT_READ;
}
/* returns the maximum number of bytes writable at once in this buffer */
static inline int buffer_max(const struct buffer *buf)
{
if (buf->l == buf->size)
return 0;
else if (buf->r >= buf->w)
return buf->data + buf->size - buf->r;
else
return buf->w - buf->r;
}
/*
* Tries to realign the given buffer, and returns how many bytes can be written
* there at once without overwriting anything.
*/
static inline int buffer_realign(struct buffer *buf)
{
if (buf->l == 0) {
/* let's realign the buffer to optimize I/O */
buf->r = buf->w = buf->lr = buf->data;
}
return buffer_max(buf);
}
/*
* Return the max amount of bytes that can be stuffed into the buffer at once.
* Note that this may be lower than the actual buffer size when the free space
* wraps after the end, so it's preferable to call this function again after
* writing. Also note that this function respects max_len.
*/
static inline int buffer_contig_space(struct buffer *buf)
{
int ret;
if (buf->l == 0) {
buf->r = buf->w = buf->lr = buf->data;
ret = buffer_max_len(buf);
}
else if (buf->r > buf->w) {
ret = buf->data + buffer_max_len(buf) - buf->r;
}
else {
ret = buf->w - buf->r;
if (ret > buffer_max_len(buf))
ret = buffer_max_len(buf);
}
return ret;
}
/* Return 1 if the buffer has less than 1/4 of its capacity free, otherwise 0 */
static inline int buffer_almost_full(struct buffer *buf)
{
if (buffer_contig_space(buf) < buf->size / 4)
return 1;
return 0;
}
/*
* Return the max amount of bytes that can be read from the buffer at once.
* Note that this may be lower than the actual buffer length when the data
* wrap after the end, so it's preferable to call this function again after
* reading. Also note that this function respects the send_max limit.
*/
static inline int buffer_contig_data(struct buffer *buf)
{
int ret;
if (!buf->send_max || !buf->l)
return 0;
if (buf->r > buf->w)
ret = buf->r - buf->w;
else
ret = buf->data + buf->size - buf->w;
/* limit the amount of outgoing data if required */
if (ret > buf->send_max)
ret = buf->send_max;
return ret;
}
/*
* Advance the buffer's read pointer by <len> bytes. This is useful when data
* have been read directly from the buffer. It is illegal to call this function
* with <len> causing a wrapping at the end of the buffer. It's the caller's
* responsibility to ensure that <len> is never larger than buf->send_max.
*/
static inline void buffer_skip(struct buffer *buf, int len)
{
buf->w += len;
if (buf->w >= buf->data + buf->size)
buf->w -= buf->size; /* wrap around the buffer */
buf->l -= len;
if (!buf->l)
buf->r = buf->w = buf->lr = buf->data;
if (buf->l < buffer_max_len(buf))
buf->flags &= ~BF_FULL;
buf->send_max -= len;
if (!buf->send_max && !buf->pipe)
buf->flags |= BF_OUT_EMPTY;
/* notify that some data was written to the SI from the buffer */
buf->flags |= BF_WRITE_PARTIAL;
}
/*
* Return one char from the buffer. If the buffer is empty and closed, return -1.
* If the buffer is just empty, return -2. The buffer's pointer is not advanced,
* it's up to the caller to call buffer_skip(buf, 1) when it has consumed the char.
* Also note that this function respects the send_max limit.
*/
static inline int buffer_si_peekchar(struct buffer *buf)
{
if (buf->send_max)
return *buf->w;
if (buf->flags & (BF_SHUTW|BF_SHUTW_NOW))
return -1;
else
return -2;
}
/* Try to write character <c> into buffer <buf> after length controls. This
* work like buffer_feed2(buf, &c, 1).
* Returns non-zero in case of success, 0 if the buffer was full.
* The send limit is automatically adjusted with the amount of data written.
*/
static inline int buffer_si_putchar(struct buffer *buf, char c)
{
if (buf->flags & BF_FULL)
return 0;
*buf->r = c;
buf->l++;
if (buf->l >= buffer_max_len(buf))
buf->flags |= BF_FULL;
buf->r++;
if (buf->r - buf->data == buf->size)
buf->r -= buf->size;
if (buf->to_forward >= 1) {
if (buf->to_forward != BUF_INFINITE_FORWARD)
buf->to_forward--;
buf->send_max++;
buf->flags &= ~BF_OUT_EMPTY;
}
buf->total++;
return 1;
}
int buffer_write(struct buffer *buf, const char *msg, int len);
int buffer_feed2(struct buffer *buf, const char *str, int len);
int buffer_si_putchar(struct buffer *buf, char c);
int buffer_si_peekline(struct buffer *buf, char *str, int len);
int buffer_replace(struct buffer *b, char *pos, char *end, const char *str);
int buffer_replace2(struct buffer *b, char *pos, char *end, const char *str, int len);
int buffer_insert_line2(struct buffer *b, char *pos, const char *str, int len);
void buffer_dump(FILE *o, struct buffer *b, int from, int to);
/* writes the chunk <chunk> to buffer <buf>. Returns -1 in case of success,
* -2 if it is larger than the buffer size, or the number of bytes available
* otherwise. If the chunk has been written, its size is automatically reset
* to zero. The send limit is automatically adjusted with the amount of data
* written.
*/
static inline int buffer_write_chunk(struct buffer *buf, struct chunk *chunk)
{
int ret;
ret = buffer_write(buf, chunk->str, chunk->len);
if (ret == -1)
chunk->len = 0;
return ret;
}
/* Try to write chunk <chunk> into buffer <buf> after length controls. This is
* the equivalent of buffer_write_chunk() except that to_forward and send_max
* are updated and that max_len is respected. Returns -1 in case of success,
* -2 if it is larger than the buffer size, or the number of bytes available
* otherwise. If the chunk has been written, its size is automatically reset
* to zero. The send limit is automatically adjusted with the amount of data
* written.
*/
static inline int buffer_feed_chunk(struct buffer *buf, struct chunk *chunk)
{
int ret;
ret = buffer_feed2(buf, chunk->str, chunk->len);
if (ret == -1)
chunk->len = 0;
return ret;
}
/* Try to write string <str> into buffer <buf> after length controls. This is
* the equivalent of buffer_feed2() except that string length is measured by
* the function. Returns -1 in case of success, -2 if it is larger than the
* buffer size, or the number of bytes available otherwise. The send limit is
* automatically adjusted with the amount of data written.
*/
static inline int buffer_feed(struct buffer *buf, const char *str)
{
return buffer_feed2(buf, str, strlen(str));
}
static inline void chunk_init(struct chunk *chk, char *str, size_t size) {
chk->str = str;
chk->len = 0;
chk->size = size;
}
/* report 0 in case of error, 1 if OK. */
static inline int chunk_initlen(struct chunk *chk, char *str, size_t size, int len) {
if (size && len > size)
return 0;
chk->str = str;
chk->len = len;
chk->size = size;
return 1;
}
static inline void chunk_initstr(struct chunk *chk, char *str) {
chk->str = str;
chk->len = strlen(str);
chk->size = 0; /* mark it read-only */
}
static inline int chunk_strcpy(struct chunk *chk, const char *str) {
size_t len;
len = strlen(str);
if (unlikely(len > chk->size))
return 0;
chk->len = len;
memcpy(chk->str, str, len);
return 1;
}
int chunk_printf(struct chunk *chk, const char *fmt, ...)
__attribute__ ((format(printf, 2, 3)));
int chunk_htmlencode(struct chunk *dst, struct chunk *src);
int chunk_asciiencode(struct chunk *dst, struct chunk *src, char qc);
static inline void chunk_reset(struct chunk *chk) {
chk->str = NULL;
chk->len = -1;
chk->size = 0;
}
static inline void chunk_destroy(struct chunk *chk) {
if (!chk->size)
return;
if (chk->str)
free(chk->str);
chunk_reset(chk);
}
/*
* frees the destination chunk if already allocated, allocates a new string,
* and copies the source into it. The pointer to the destination string is
* returned, or NULL if the allocation fails or if any pointer is NULL..
*/
static inline char *chunk_dup(struct chunk *dst, const struct chunk *src) {
if (!dst || !src || !src->str)
return NULL;
if (dst->str)
free(dst->str);
dst->len = src->len;
dst->str = (char *)malloc(dst->len);
memcpy(dst->str, src->str, dst->len);
return dst->str;
}
#endif /* _PROTO_BUFFERS_H */
/*
* Local variables:
* c-indent-level: 8
* c-basic-offset: 8
* End:
*/