Makefile.bsd - haproxy - Gitiles

 # This makefile is dedicated to OpenBSD (and possibly other BSDs)
 # You should use it this way :
 #   make TARGET=os CPU=cpu
 #
 # Some optional components may be added, such as DLMALLOC :
 #
 #   make TARGET=freebsd CPU=i686 DLMALLOC_SRC=/usr/local/src/dlmalloc.c \
 #        OPT_OBJS=src/dlmalloc.o

 # Select target OS. TARGET must match a system for which COPTS and LIBS are
 # correctly defined below.
 TARGET = openbsd

 # pass CPU=<cpu_name> to make to optimize for a particular CPU
 CPU = generic
 #CPU = native
 #CPU = i586
 #CPU = i686
 #CPU = ultrasparc

 # By default, we use libc's regex. WARNING! On Solaris 8/Sparc, group
 # references seem broken using libc ! Use pcre instead.
 REGEX=libc
 #REGEX=pcre
 #REGEX=static-pcre

 # tools options
 CC = gcc
 LD = gcc

 # This is the directory hosting include/pcre.h and lib/libpcre.* when REGEX=pcre
 PCREDIR!= pcre-config --prefix 2>/dev/null || :
 #PCREDIR=/usr/local

 # This is for OpenBSD 3.0 and above
 COPTS.openbsd = -DENABLE_POLL -DENABLE_KQUEUE
 LIBS.openbsd =

 # CPU dependant optimizations
 COPTS.generic = -O2
 COPTS.native = -O2 -march=native
 COPTS.i586 = -O2 -march=i586
 COPTS.i686 = -O2 -march=i686
 COPTS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc

 # options for standard regex library
 COPTS.libc=
 LIBS.libc=

 # options for libpcre
 COPTS.pcre=-DUSE_PCRE -I$(PCREDIR)/include
 LIBS.pcre=-L$(PCREDIR)/lib -lpcreposix -lpcre

 # options for static libpcre
 COPTS.static-pcre=-DUSE_PCRE -I$(PCREDIR)/include
 LIBS.static-pcre=-L$(PCREDIR)/lib -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic

 # you can enable debug arguments with "DEBUG=-g" or disable them with "DEBUG="
 #DEBUG = -g -DDEBUG_MEMORY -DDEBUG_FULL
 DEBUG = -g

 # if small memory footprint is required, you can reduce the buffer size. There
 # are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory
 # with 1000 concurrent sessions. Putting it slightly lower than a page size
 # will avoid the additionnal paramters to overflow a page. 8030 bytes is
 # exactly 5.5 TCP segments of 1460 bytes.
 #SMALL_OPTS =
 SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024

 # redefine this if you want to add some special PATH to include/libs
 ADDINC =
 ADDLIB =

 # redefine this if you want to add some special .o files
 OPT_OBJS =

 # set some defines when needed.
 # Known ones are -DENABLE_POLL
 # - use -DTPROXY to compile with transparent proxy support.
 # - use -DUSE_GETADDRINFO to use of getaddrinfo() to resolve IPv6 host names
 DEFINE = -DTPROXY

 # May be changed to patch PAGE_SIZE on every platform when using dlmalloc
 DLMALLOC_THRES=4096

 # global options
 TARGET_OPTS=$(COPTS.$(TARGET))
 REGEX_OPTS=$(COPTS.$(REGEX))
 CPU_OPTS=$(COPTS.$(CPU))
 SPEC_OPTS=-fno-strict-aliasing

 VERSION != cat VERSION 2>/dev/null || touch VERSION
 SUBVERS != cat SUBVERS 2>/dev/null || touch SUBVERS
 VERDATE != cat VERDATE 2>/dev/null || touch VERDATE

 VER_OPTS := -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)\" \
             -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\"

 # This one can be changed to look for ebtree files in an external directory
 EBTREE_DIR := ebtree

 COPTS   = -Iinclude -I$(EBTREE_DIR) $(ADDINC) $(CPU_OPTS) $(TARGET_OPTS) \
           $(SPEC_OPTS) $(REGEX_OPTS) $(SMALL_OPTS) $(VER_OPTS) $(DEFINE)
 LIBS    = $(LIBS.$(TARGET)) $(LIBS.$(REGEX)) $(ADDLIB)
 CFLAGS  = -Wall $(COPTS) $(DEBUG)
 LDFLAGS = -g

 OBJS = src/haproxy.o src/sessionhash.o src/base64.o src/protocols.o \
        src/uri_auth.o src/standard.o src/buffers.o src/log.o src/task.o \
        src/time.o src/fd.o src/pipe.o src/regex.o src/cfgparse.o src/server.o \
        src/checks.o src/queue.o src/frontend.o src/proxy.o src/proto_uxst.o \
        src/proto_http.o src/stream_sock.o src/appsession.o src/backend.o \
        src/peers.o src/stream_interface.o src/dumpstats.o src/proto_tcp.o \
        src/session.o src/hdr_idx.o src/ev_select.o src/signal.o \
        src/lb_chash.o src/lb_fwlc.o src/lb_fwrr.o src/lb_map.o \
        src/ev_poll.o src/ev_kqueue.o \
        src/acl.o src/memory.o src/freq_ctr.o \
        src/auth.o src/stick_table.o src/pattern.o

 EBTREE_OBJS = $(EBTREE_DIR)/ebtree.o \
               $(EBTREE_DIR)/eb32tree.o $(EBTREE_DIR)/eb64tree.o \
               $(EBTREE_DIR)/ebmbtree.o $(EBTREE_DIR)/ebsttree.o \
               $(EBTREE_DIR)/ebimtree.o $(EBTREE_DIR)/ebistree.o

 all: haproxy

 haproxy: $(OBJS) $(OPT_OBJS) $(EBTREE_OBJS)
 	$(LD) $(LDFLAGS) -o $@ $> $(LIBS)

 .SUFFIXES: .c.o

 .c.o:
 	$(CC) $(CFLAGS) -c -o $@ $>

 src/haproxy.o: src/haproxy.c
 	$(CC) $(CFLAGS) -DBUILD_TARGET='"$(TARGET)"' -DBUILD_CC='"$(CC)"' \
 	                -DBUILD_CPU='"$(CPU)"' -DBUILD_REGEX='"$(REGEX)"' \
 	                -DBUILD_OPTS='"$(COPTS)"' -c -o $@ $>

 src/dlmalloc.o: $(DLMALLOC_SRC)
 	$(CC) $(CFLAGS) -DDEFAULT_MMAP_THRESHOLD=$(DLMALLOC_THRES) -c -o $@ $>

 clean:
 	rm -f *.[oas] src/*.[oas] ebtree/*.[oas] haproxy test
 	for dir in . src include/* doc ebtree; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done
 	rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION) nohup.out gmon.out

 version:
 	@echo "VERSION: $(VERSION)"
 	@echo "SUBVERS: $(SUBVERS)"
 	@echo "VERDATE: $(VERDATE)"
	# This makefile is dedicated to OpenBSD (and possibly other BSDs)
	# You should use it this way :
	# make TARGET=os CPU=cpu
	#
	# Some optional components may be added, such as DLMALLOC :
	#
	# make TARGET=freebsd CPU=i686 DLMALLOC_SRC=/usr/local/src/dlmalloc.c \
	# OPT_OBJS=src/dlmalloc.o

	# Select target OS. TARGET must match a system for which COPTS and LIBS are
	# correctly defined below.
	TARGET = openbsd

	# pass CPU=<cpu_name> to make to optimize for a particular CPU
	CPU = generic
	#CPU = native
	#CPU = i586
	#CPU = i686
	#CPU = ultrasparc

	# By default, we use libc's regex. WARNING! On Solaris 8/Sparc, group
	# references seem broken using libc ! Use pcre instead.
	REGEX=libc
	#REGEX=pcre
	#REGEX=static-pcre

	# tools options
	CC = gcc
	LD = gcc

	# This is the directory hosting include/pcre.h and lib/libpcre.* when REGEX=pcre
	PCREDIR!= pcre-config --prefix 2>/dev/null \|\| :
	#PCREDIR=/usr/local

	# This is for OpenBSD 3.0 and above
	COPTS.openbsd = -DENABLE_POLL -DENABLE_KQUEUE
	LIBS.openbsd =

	# CPU dependant optimizations
	COPTS.generic = -O2
	COPTS.native = -O2 -march=native
	COPTS.i586 = -O2 -march=i586
	COPTS.i686 = -O2 -march=i686
	COPTS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc

	# options for standard regex library
	COPTS.libc=
	LIBS.libc=

	# options for libpcre
	COPTS.pcre=-DUSE_PCRE -I$(PCREDIR)/include
	LIBS.pcre=-L$(PCREDIR)/lib -lpcreposix -lpcre

	# options for static libpcre
	COPTS.static-pcre=-DUSE_PCRE -I$(PCREDIR)/include
	LIBS.static-pcre=-L$(PCREDIR)/lib -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic

	# you can enable debug arguments with "DEBUG=-g" or disable them with "DEBUG="
	#DEBUG = -g -DDEBUG_MEMORY -DDEBUG_FULL
	DEBUG = -g

	# if small memory footprint is required, you can reduce the buffer size. There
	# are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory
	# with 1000 concurrent sessions. Putting it slightly lower than a page size
	# will avoid the additionnal paramters to overflow a page. 8030 bytes is
	# exactly 5.5 TCP segments of 1460 bytes.
	#SMALL_OPTS =
	SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024

	# redefine this if you want to add some special PATH to include/libs
	ADDINC =
	ADDLIB =

	# redefine this if you want to add some special .o files
	OPT_OBJS =

	# set some defines when needed.
	# Known ones are -DENABLE_POLL
	# - use -DTPROXY to compile with transparent proxy support.
	# - use -DUSE_GETADDRINFO to use of getaddrinfo() to resolve IPv6 host names
	DEFINE = -DTPROXY

	# May be changed to patch PAGE_SIZE on every platform when using dlmalloc
	DLMALLOC_THRES=4096

	# global options
	TARGET_OPTS=$(COPTS.$(TARGET))
	REGEX_OPTS=$(COPTS.$(REGEX))
	CPU_OPTS=$(COPTS.$(CPU))
	SPEC_OPTS=-fno-strict-aliasing

	VERSION != cat VERSION 2>/dev/null \|\| touch VERSION
	SUBVERS != cat SUBVERS 2>/dev/null \|\| touch SUBVERS
	VERDATE != cat VERDATE 2>/dev/null \|\| touch VERDATE

	VER_OPTS := -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)\" \
	-DCONFIG_HAPROXY_DATE=\"$(VERDATE)\"

	# This one can be changed to look for ebtree files in an external directory
	EBTREE_DIR := ebtree

	COPTS = -Iinclude -I$(EBTREE_DIR) $(ADDINC) $(CPU_OPTS) $(TARGET_OPTS) \
	$(SPEC_OPTS) $(REGEX_OPTS) $(SMALL_OPTS) $(VER_OPTS) $(DEFINE)
	LIBS = $(LIBS.$(TARGET)) $(LIBS.$(REGEX)) $(ADDLIB)
	CFLAGS = -Wall $(COPTS) $(DEBUG)
	LDFLAGS = -g

	OBJS = src/haproxy.o src/sessionhash.o src/base64.o src/protocols.o \
	src/uri_auth.o src/standard.o src/buffers.o src/log.o src/task.o \
	src/time.o src/fd.o src/pipe.o src/regex.o src/cfgparse.o src/server.o \
	src/checks.o src/queue.o src/frontend.o src/proxy.o src/proto_uxst.o \
	src/proto_http.o src/stream_sock.o src/appsession.o src/backend.o \
	src/peers.o src/stream_interface.o src/dumpstats.o src/proto_tcp.o \
	src/session.o src/hdr_idx.o src/ev_select.o src/signal.o \
	src/lb_chash.o src/lb_fwlc.o src/lb_fwrr.o src/lb_map.o \
	src/ev_poll.o src/ev_kqueue.o \
	src/acl.o src/memory.o src/freq_ctr.o \
	src/auth.o src/stick_table.o src/pattern.o

	EBTREE_OBJS = $(EBTREE_DIR)/ebtree.o \
	$(EBTREE_DIR)/eb32tree.o $(EBTREE_DIR)/eb64tree.o \
	$(EBTREE_DIR)/ebmbtree.o $(EBTREE_DIR)/ebsttree.o \
	$(EBTREE_DIR)/ebimtree.o $(EBTREE_DIR)/ebistree.o

	all: haproxy

	haproxy: $(OBJS) $(OPT_OBJS) $(EBTREE_OBJS)
	$(LD) $(LDFLAGS) -o $@ $> $(LIBS)

	.SUFFIXES: .c.o

	.c.o:
	$(CC) $(CFLAGS) -c -o $@ $>

	src/haproxy.o: src/haproxy.c
	$(CC) $(CFLAGS) -DBUILD_TARGET='"$(TARGET)"' -DBUILD_CC='"$(CC)"' \
	-DBUILD_CPU='"$(CPU)"' -DBUILD_REGEX='"$(REGEX)"' \
	-DBUILD_OPTS='"$(COPTS)"' -c -o $@ $>

	src/dlmalloc.o: $(DLMALLOC_SRC)
	$(CC) $(CFLAGS) -DDEFAULT_MMAP_THRESHOLD=$(DLMALLOC_THRES) -c -o $@ $>

	clean:
	rm -f .[oas] src/.[oas] ebtree/*.[oas] haproxy test
	for dir in . src include/* doc ebtree; do rm -f $$dir/~ $$dir/.rej $$dir/core; done
	rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION) nohup.out gmon.out

	version:
	@echo "VERSION: $(VERSION)"
	@echo "SUBVERS: $(SUBVERS)"
	@echo "VERDATE: $(VERDATE)"