| /* |
| * Memory management functions. |
| * |
| * Copyright 2000-2007 Willy Tarreau <w@1wt.eu> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <sys/mman.h> |
| #include <errno.h> |
| |
| #include <haproxy/activity.h> |
| #include <haproxy/api.h> |
| #include <haproxy/applet-t.h> |
| #include <haproxy/cfgparse.h> |
| #include <haproxy/channel.h> |
| #include <haproxy/cli.h> |
| #include <haproxy/errors.h> |
| #include <haproxy/global.h> |
| #include <haproxy/list.h> |
| #include <haproxy/pool.h> |
| #include <haproxy/stats-t.h> |
| #include <haproxy/stream_interface.h> |
| #include <haproxy/thread.h> |
| #include <haproxy/tools.h> |
| |
| |
| #ifdef CONFIG_HAP_POOLS |
| /* These ones are initialized per-thread on startup by init_pools() */ |
| THREAD_LOCAL size_t pool_cache_bytes = 0; /* total cache size */ |
| THREAD_LOCAL size_t pool_cache_count = 0; /* #cache objects */ |
| #endif |
| |
| static struct list pools = LIST_HEAD_INIT(pools); |
| int mem_poison_byte = -1; |
| |
| #ifdef DEBUG_FAIL_ALLOC |
| static int mem_fail_rate = 0; |
| #endif |
| |
| static int using_default_allocator = 1; |
| static int(*my_mallctl)(const char *, void *, size_t *, void *, size_t) = NULL; |
| |
| /* ask the allocator to trim memory pools. |
| * This must run under thread isolation so that competing threads trying to |
| * allocate or release memory do not prevent the allocator from completing |
| * its job. We just have to be careful as callers might already be isolated |
| * themselves. |
| */ |
| static void trim_all_pools(void) |
| { |
| int isolated = thread_isolated(); |
| |
| if (!isolated) |
| thread_isolate(); |
| |
| if (my_mallctl) { |
| unsigned int i, narenas = 0; |
| size_t len = sizeof(narenas); |
| |
| if (my_mallctl("arenas.narenas", &narenas, &len, NULL, 0) == 0) { |
| for (i = 0; i < narenas; i ++) { |
| char mib[32] = {0}; |
| snprintf(mib, sizeof(mib), "arena.%u.purge", i); |
| (void)my_mallctl(mib, NULL, NULL, NULL, 0); |
| } |
| } |
| } else { |
| #if defined(HA_HAVE_MALLOC_TRIM) |
| if (using_default_allocator) |
| malloc_trim(0); |
| #elif defined(HA_HAVE_MALLOC_ZONE) |
| if (using_default_allocator) { |
| vm_address_t *zones; |
| unsigned int i, nzones; |
| |
| if (malloc_get_all_zones(0, NULL, &zones, &nzones) == KERN_SUCCESS) { |
| for (i = 0; i < nzones; i ++) { |
| malloc_zone_t *zone = (malloc_zone_t *)zones[i]; |
| |
| /* we cannot purge anonymous zones */ |
| if (zone->zone_name) |
| malloc_zone_pressure_relief(zone, 0); |
| } |
| } |
| } |
| #endif |
| } |
| |
| if (!isolated) |
| thread_release(); |
| } |
| |
| /* check if we're using the same allocator as the one that provides |
| * malloc_trim() and mallinfo(). The principle is that on glibc, both |
| * malloc_trim() and mallinfo() are provided, and using mallinfo() we |
| * can check if malloc() is performed through glibc or any other one |
| * the executable was linked against (e.g. jemalloc). Prior to this we |
| * have to check whether we're running on jemalloc by verifying if the |
| * mallctl() function is provided. Its pointer will be used later. |
| */ |
| static void detect_allocator(void) |
| { |
| #if defined(__ELF__) |
| extern int mallctl(const char *, void *, size_t *, void *, size_t) __attribute__((weak)); |
| |
| my_mallctl = mallctl; |
| #endif |
| |
| if (!my_mallctl) { |
| my_mallctl = get_sym_curr_addr("mallctl"); |
| using_default_allocator = (my_mallctl == NULL); |
| } |
| |
| if (!my_mallctl) { |
| #if defined(HA_HAVE_MALLOC_TRIM) |
| #ifdef HA_HAVE_MALLINFO2 |
| struct mallinfo2 mi1, mi2; |
| #else |
| struct mallinfo mi1, mi2; |
| #endif |
| void *ptr; |
| |
| #ifdef HA_HAVE_MALLINFO2 |
| mi1 = mallinfo2(); |
| #else |
| mi1 = mallinfo(); |
| #endif |
| ptr = DISGUISE(malloc(1)); |
| #ifdef HA_HAVE_MALLINFO2 |
| mi2 = mallinfo2(); |
| #else |
| mi2 = mallinfo(); |
| #endif |
| free(DISGUISE(ptr)); |
| |
| using_default_allocator = !!memcmp(&mi1, &mi2, sizeof(mi1)); |
| #elif defined(HA_HAVE_MALLOC_ZONE) |
| using_default_allocator = (malloc_default_zone() != NULL); |
| #endif |
| } |
| } |
| |
| static int is_trim_enabled(void) |
| { |
| return using_default_allocator; |
| } |
| |
| /* Try to find an existing shared pool with the same characteristics and |
| * returns it, otherwise creates this one. NULL is returned if no memory |
| * is available for a new creation. Two flags are supported : |
| * - MEM_F_SHARED to indicate that the pool may be shared with other users |
| * - MEM_F_EXACT to indicate that the size must not be rounded up |
| */ |
| struct pool_head *create_pool(char *name, unsigned int size, unsigned int flags) |
| { |
| struct pool_head *pool; |
| struct pool_head *entry; |
| struct list *start; |
| unsigned int align; |
| int thr __maybe_unused; |
| |
| /* We need to store a (void *) at the end of the chunks. Since we know |
| * that the malloc() function will never return such a small size, |
| * let's round the size up to something slightly bigger, in order to |
| * ease merging of entries. Note that the rounding is a power of two. |
| * This extra (void *) is not accounted for in the size computation |
| * so that the visible parts outside are not affected. |
| * |
| * Note: for the LRU cache, we need to store 2 doubly-linked lists. |
| */ |
| |
| if (!(flags & MEM_F_EXACT)) { |
| align = 4 * sizeof(void *); // 2 lists = 4 pointers min |
| size = ((size + POOL_EXTRA + align - 1) & -align) - POOL_EXTRA; |
| } |
| |
| /* TODO: thread: we do not lock pool list for now because all pools are |
| * created during HAProxy startup (so before threads creation) */ |
| start = &pools; |
| pool = NULL; |
| |
| list_for_each_entry(entry, &pools, list) { |
| if (entry->size == size) { |
| /* either we can share this place and we take it, or |
| * we look for a shareable one or for the next position |
| * before which we will insert a new one. |
| */ |
| if ((flags & entry->flags & MEM_F_SHARED) |
| #ifdef DEBUG_DONT_SHARE_POOLS |
| && strcmp(name, entry->name) == 0 |
| #endif |
| ) { |
| /* we can share this one */ |
| pool = entry; |
| DPRINTF(stderr, "Sharing %s with %s\n", name, pool->name); |
| break; |
| } |
| } |
| else if (entry->size > size) { |
| /* insert before this one */ |
| start = &entry->list; |
| break; |
| } |
| } |
| |
| if (!pool) { |
| if (!pool) |
| pool = calloc(1, sizeof(*pool)); |
| |
| if (!pool) |
| return NULL; |
| if (name) |
| strlcpy2(pool->name, name, sizeof(pool->name)); |
| pool->size = size; |
| pool->flags = flags; |
| LIST_APPEND(start, &pool->list); |
| |
| #ifdef CONFIG_HAP_POOLS |
| /* update per-thread pool cache if necessary */ |
| for (thr = 0; thr < MAX_THREADS; thr++) { |
| LIST_INIT(&pool->cache[thr].list); |
| } |
| #endif |
| } |
| pool->users++; |
| return pool; |
| } |
| |
| /* Tries to allocate an object for the pool <pool> using the system's allocator |
| * and directly returns it. The pool's allocated counter is checked and updated, |
| * but no other checks are performed. |
| */ |
| void *pool_get_from_os(struct pool_head *pool) |
| { |
| if (!pool->limit || pool->allocated < pool->limit) { |
| void *ptr = pool_alloc_area(pool->size + POOL_EXTRA); |
| if (ptr) { |
| _HA_ATOMIC_INC(&pool->allocated); |
| return ptr; |
| } |
| _HA_ATOMIC_INC(&pool->failed); |
| } |
| activity[tid].pool_fail++; |
| return NULL; |
| |
| } |
| |
| /* Releases a pool item back to the operating system and atomically updates |
| * the allocation counter. |
| */ |
| void pool_put_to_os(struct pool_head *pool, void *ptr) |
| { |
| #ifdef DEBUG_UAF |
| /* This object will be released for real in order to detect a use after |
| * free. We also force a write to the area to ensure we crash on double |
| * free or free of a const area. |
| */ |
| *(uint32_t *)ptr = 0xDEADADD4; |
| #endif /* DEBUG_UAF */ |
| |
| pool_free_area(ptr, pool->size + POOL_EXTRA); |
| _HA_ATOMIC_DEC(&pool->allocated); |
| } |
| |
| /* Tries to allocate an object for the pool <pool> using the system's allocator |
| * and directly returns it. The pool's counters are updated but the object is |
| * never cached, so this is usable with and without local or shared caches. |
| */ |
| void *pool_alloc_nocache(struct pool_head *pool) |
| { |
| void *ptr = NULL; |
| |
| ptr = pool_get_from_os(pool); |
| if (!ptr) |
| return NULL; |
| |
| swrate_add_scaled(&pool->needed_avg, POOL_AVG_SAMPLES, pool->used, POOL_AVG_SAMPLES/4); |
| _HA_ATOMIC_INC(&pool->used); |
| |
| /* keep track of where the element was allocated from */ |
| POOL_DEBUG_SET_MARK(pool, ptr); |
| POOL_DEBUG_TRACE_CALLER(pool, (struct pool_cache_item *)ptr, NULL); |
| return ptr; |
| } |
| |
| /* Release a pool item back to the OS and keeps the pool's counters up to date. |
| * This is always defined even when pools are not enabled (their usage stats |
| * are maintained). |
| */ |
| void pool_free_nocache(struct pool_head *pool, void *ptr) |
| { |
| _HA_ATOMIC_DEC(&pool->used); |
| swrate_add(&pool->needed_avg, POOL_AVG_SAMPLES, pool->used); |
| pool_put_to_os(pool, ptr); |
| } |
| |
| |
| #ifdef CONFIG_HAP_POOLS |
| |
| /* removes up to <count> items from the end of the local pool cache <ph> for |
| * pool <pool>. The shared pool is refilled with these objects in the limit |
| * of the number of acceptable objects, and the rest will be released to the |
| * OS. It is not a problem is <count> is larger than the number of objects in |
| * the local cache. The counters are automatically updated. |
| */ |
| static void pool_evict_last_items(struct pool_head *pool, struct pool_cache_head *ph, uint count) |
| { |
| struct pool_cache_item *item; |
| struct pool_item *pi, *head = NULL; |
| uint released = 0; |
| uint cluster = 0; |
| uint to_free_max; |
| |
| to_free_max = pool_releasable(pool); |
| |
| while (released < count && !LIST_ISEMPTY(&ph->list)) { |
| item = LIST_PREV(&ph->list, typeof(item), by_pool); |
| pool_check_pattern(ph, item, pool->size); |
| LIST_DELETE(&item->by_pool); |
| LIST_DELETE(&item->by_lru); |
| |
| if (to_free_max > released || cluster) { |
| pi = (struct pool_item *)item; |
| pi->next = NULL; |
| pi->down = head; |
| head = pi; |
| cluster++; |
| if (cluster >= CONFIG_HAP_POOL_CLUSTER_SIZE) { |
| /* enough to make a cluster */ |
| pool_put_to_shared_cache(pool, head, cluster); |
| cluster = 0; |
| head = NULL; |
| } |
| } else |
| pool_free_nocache(pool, item); |
| |
| released++; |
| } |
| |
| /* incomplete cluster left */ |
| if (cluster) |
| pool_put_to_shared_cache(pool, head, cluster); |
| |
| ph->count -= released; |
| pool_cache_count -= released; |
| pool_cache_bytes -= released * pool->size; |
| } |
| |
| /* Evicts some of the oldest objects from one local cache, until its number of |
| * objects is no more than 16+1/8 of the total number of locally cached objects |
| * or the total size of the local cache is no more than 75% of its maximum (i.e. |
| * we don't want a single cache to use all the cache for itself). For this, the |
| * list is scanned in reverse. |
| */ |
| void pool_evict_from_local_cache(struct pool_head *pool) |
| { |
| struct pool_cache_head *ph = &pool->cache[tid]; |
| |
| while (ph->count >= CONFIG_HAP_POOL_CLUSTER_SIZE && |
| ph->count >= 16 + pool_cache_count / 8 && |
| pool_cache_bytes > CONFIG_HAP_POOL_CACHE_SIZE * 3 / 4) { |
| pool_evict_last_items(pool, ph, CONFIG_HAP_POOL_CLUSTER_SIZE); |
| } |
| } |
| |
| /* Evicts some of the oldest objects from the local cache, pushing them to the |
| * global pool. |
| */ |
| void pool_evict_from_local_caches() |
| { |
| struct pool_cache_item *item; |
| struct pool_cache_head *ph; |
| struct pool_head *pool; |
| |
| do { |
| item = LIST_PREV(&th_ctx->pool_lru_head, struct pool_cache_item *, by_lru); |
| /* note: by definition we remove oldest objects so they also are the |
| * oldest in their own pools, thus their next is the pool's head. |
| */ |
| ph = LIST_NEXT(&item->by_pool, struct pool_cache_head *, list); |
| pool = container_of(ph - tid, struct pool_head, cache); |
| pool_evict_last_items(pool, ph, CONFIG_HAP_POOL_CLUSTER_SIZE); |
| } while (pool_cache_bytes > CONFIG_HAP_POOL_CACHE_SIZE * 7 / 8); |
| } |
| |
| /* Frees an object to the local cache, possibly pushing oldest objects to the |
| * shared cache, which itself may decide to release some of them to the OS. |
| * While it is unspecified what the object becomes past this point, it is |
| * guaranteed to be released from the users' perpective. A caller address may |
| * be passed and stored into the area when DEBUG_POOL_TRACING is set. |
| */ |
| void pool_put_to_cache(struct pool_head *pool, void *ptr, const void *caller) |
| { |
| struct pool_cache_item *item = (struct pool_cache_item *)ptr; |
| struct pool_cache_head *ph = &pool->cache[tid]; |
| |
| LIST_INSERT(&ph->list, &item->by_pool); |
| LIST_INSERT(&th_ctx->pool_lru_head, &item->by_lru); |
| POOL_DEBUG_TRACE_CALLER(pool, item, caller); |
| ph->count++; |
| pool_fill_pattern(ph, item, pool->size); |
| pool_cache_count++; |
| pool_cache_bytes += pool->size; |
| |
| if (unlikely(pool_cache_bytes > CONFIG_HAP_POOL_CACHE_SIZE * 3 / 4)) { |
| if (ph->count >= 16 + pool_cache_count / 8 + CONFIG_HAP_POOL_CLUSTER_SIZE) |
| pool_evict_from_local_cache(pool); |
| if (pool_cache_bytes > CONFIG_HAP_POOL_CACHE_SIZE) |
| pool_evict_from_local_caches(); |
| } |
| } |
| |
| #if defined(CONFIG_HAP_NO_GLOBAL_POOLS) |
| |
| /* legacy stuff */ |
| void pool_flush(struct pool_head *pool) |
| { |
| } |
| |
| /* This function might ask the malloc library to trim its buffers. */ |
| void pool_gc(struct pool_head *pool_ctx) |
| { |
| trim_all_pools(); |
| } |
| |
| #else /* CONFIG_HAP_NO_GLOBAL_POOLS */ |
| |
| /* Tries to refill the local cache <pch> from the shared one for pool <pool>. |
| * This is only used when pools are in use and shared pools are enabled. No |
| * malloc() is attempted, and poisonning is never performed. The purpose is to |
| * get the fastest possible refilling so that the caller can easily check if |
| * the cache has enough objects for its use. |
| */ |
| void pool_refill_local_from_shared(struct pool_head *pool, struct pool_cache_head *pch) |
| { |
| struct pool_cache_item *item; |
| struct pool_item *ret, *down; |
| uint count; |
| |
| /* we'll need to reference the first element to figure the next one. We |
| * must temporarily lock it so that nobody allocates then releases it, |
| * or the dereference could fail. |
| */ |
| ret = _HA_ATOMIC_LOAD(&pool->free_list); |
| do { |
| while (unlikely(ret == POOL_BUSY)) { |
| __ha_cpu_relax(); |
| ret = _HA_ATOMIC_LOAD(&pool->free_list); |
| } |
| if (ret == NULL) |
| return; |
| } while (unlikely((ret = _HA_ATOMIC_XCHG(&pool->free_list, POOL_BUSY)) == POOL_BUSY)); |
| |
| if (unlikely(ret == NULL)) { |
| HA_ATOMIC_STORE(&pool->free_list, NULL); |
| return; |
| } |
| |
| /* this releases the lock */ |
| HA_ATOMIC_STORE(&pool->free_list, ret->next); |
| |
| /* now store the retrieved object(s) into the local cache */ |
| count = 0; |
| for (; ret; ret = down) { |
| down = ret->down; |
| /* keep track of where the element was allocated from */ |
| POOL_DEBUG_SET_MARK(pool, ret); |
| |
| item = (struct pool_cache_item *)ret; |
| POOL_DEBUG_TRACE_CALLER(pool, item, NULL); |
| LIST_INSERT(&pch->list, &item->by_pool); |
| LIST_INSERT(&th_ctx->pool_lru_head, &item->by_lru); |
| count++; |
| pool_fill_pattern(pch, item, pool->size); |
| } |
| HA_ATOMIC_ADD(&pool->used, count); |
| pch->count += count; |
| pool_cache_count += count; |
| pool_cache_bytes += count * pool->size; |
| } |
| |
| /* Adds pool item cluster <item> to the shared cache, which contains <count> |
| * elements. The caller is advised to first check using pool_releasable() if |
| * it's wise to add this series of objects there. Both the pool and the item's |
| * head must be valid. |
| */ |
| void pool_put_to_shared_cache(struct pool_head *pool, struct pool_item *item, uint count) |
| { |
| struct pool_item *free_list; |
| |
| _HA_ATOMIC_SUB(&pool->used, count); |
| free_list = _HA_ATOMIC_LOAD(&pool->free_list); |
| do { |
| while (unlikely(free_list == POOL_BUSY)) { |
| __ha_cpu_relax(); |
| free_list = _HA_ATOMIC_LOAD(&pool->free_list); |
| } |
| _HA_ATOMIC_STORE(&item->next, free_list); |
| __ha_barrier_atomic_store(); |
| } while (!_HA_ATOMIC_CAS(&pool->free_list, &free_list, item)); |
| __ha_barrier_atomic_store(); |
| swrate_add(&pool->needed_avg, POOL_AVG_SAMPLES, pool->used); |
| } |
| |
| /* |
| * This function frees whatever can be freed in pool <pool>. |
| */ |
| void pool_flush(struct pool_head *pool) |
| { |
| struct pool_item *next, *temp, *down; |
| |
| if (!pool) |
| return; |
| |
| /* The loop below atomically detaches the head of the free list and |
| * replaces it with a NULL. Then the list can be released. |
| */ |
| next = pool->free_list; |
| do { |
| while (unlikely(next == POOL_BUSY)) { |
| __ha_cpu_relax(); |
| next = _HA_ATOMIC_LOAD(&pool->free_list); |
| } |
| if (next == NULL) |
| return; |
| } while (unlikely((next = _HA_ATOMIC_XCHG(&pool->free_list, POOL_BUSY)) == POOL_BUSY)); |
| _HA_ATOMIC_STORE(&pool->free_list, NULL); |
| __ha_barrier_atomic_store(); |
| |
| while (next) { |
| temp = next; |
| next = temp->next; |
| for (; temp; temp = down) { |
| down = temp->down; |
| pool_put_to_os(pool, temp); |
| } |
| } |
| /* here, we should have pool->allocated == pool->used */ |
| } |
| |
| /* |
| * This function frees whatever can be freed in all pools, but respecting |
| * the minimum thresholds imposed by owners. It makes sure to be alone to |
| * run by using thread_isolate(). <pool_ctx> is unused. |
| */ |
| void pool_gc(struct pool_head *pool_ctx) |
| { |
| struct pool_head *entry; |
| int isolated = thread_isolated(); |
| |
| if (!isolated) |
| thread_isolate(); |
| |
| list_for_each_entry(entry, &pools, list) { |
| struct pool_item *temp, *down; |
| |
| while (entry->free_list && |
| (int)(entry->allocated - entry->used) > (int)entry->minavail) { |
| temp = entry->free_list; |
| entry->free_list = temp->next; |
| for (; temp; temp = down) { |
| down = temp->down; |
| pool_put_to_os(entry, temp); |
| } |
| } |
| } |
| |
| trim_all_pools(); |
| |
| if (!isolated) |
| thread_release(); |
| } |
| #endif /* CONFIG_HAP_NO_GLOBAL_POOLS */ |
| |
| #else /* CONFIG_HAP_POOLS */ |
| |
| /* legacy stuff */ |
| void pool_flush(struct pool_head *pool) |
| { |
| } |
| |
| /* This function might ask the malloc library to trim its buffers. */ |
| void pool_gc(struct pool_head *pool_ctx) |
| { |
| trim_all_pools(); |
| } |
| |
| #endif /* CONFIG_HAP_POOLS */ |
| |
| /* |
| * Returns a pointer to type <type> taken from the pool <pool_type> or |
| * dynamically allocated. In the first case, <pool_type> is updated to point to |
| * the next element in the list. <flags> is a binary-OR of POOL_F_* flags. |
| * Prefer using pool_alloc() which does the right thing without flags. |
| */ |
| void *__pool_alloc(struct pool_head *pool, unsigned int flags) |
| { |
| void *p = NULL; |
| void *caller = NULL; |
| |
| #ifdef DEBUG_FAIL_ALLOC |
| if (unlikely(!(flags & POOL_F_NO_FAIL) && mem_should_fail(pool))) |
| return NULL; |
| #endif |
| |
| #if defined(DEBUG_POOL_TRACING) |
| caller = __builtin_return_address(0); |
| #endif |
| if (!p) |
| p = pool_get_from_cache(pool, caller); |
| if (unlikely(!p)) |
| p = pool_alloc_nocache(pool); |
| |
| if (likely(p)) { |
| if (unlikely(flags & POOL_F_MUST_ZERO)) |
| memset(p, 0, pool->size); |
| else if (unlikely(!(flags & POOL_F_NO_POISON) && mem_poison_byte >= 0)) |
| memset(p, mem_poison_byte, pool->size); |
| } |
| return p; |
| } |
| |
| /* |
| * Puts a memory area back to the corresponding pool. <ptr> be valid. Using |
| * pool_free() is preferred. |
| */ |
| void __pool_free(struct pool_head *pool, void *ptr) |
| { |
| const void *caller = NULL; |
| |
| #if defined(DEBUG_POOL_TRACING) |
| caller = __builtin_return_address(0); |
| #endif |
| /* we'll get late corruption if we refill to the wrong pool or double-free */ |
| POOL_DEBUG_CHECK_MARK(pool, ptr); |
| |
| if (unlikely(mem_poison_byte >= 0)) |
| memset(ptr, mem_poison_byte, pool->size); |
| |
| pool_put_to_cache(pool, ptr, caller); |
| } |
| |
| |
| #ifdef DEBUG_UAF |
| |
| /************* use-after-free allocator *************/ |
| |
| /* allocates an area of size <size> and returns it. The semantics are similar |
| * to those of malloc(). However the allocation is rounded up to 4kB so that a |
| * full page is allocated. This ensures the object can be freed alone so that |
| * future dereferences are easily detected. The returned object is always |
| * 16-bytes aligned to avoid issues with unaligned structure objects. In case |
| * some padding is added, the area's start address is copied at the end of the |
| * padding to help detect underflows. |
| */ |
| void *pool_alloc_area_uaf(size_t size) |
| { |
| size_t pad = (4096 - size) & 0xFF0; |
| void *ret; |
| |
| ret = mmap(NULL, (size + 4095) & -4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); |
| if (ret != MAP_FAILED) { |
| /* let's dereference the page before returning so that the real |
| * allocation in the system is performed without holding the lock. |
| */ |
| *(int *)ret = 0; |
| if (pad >= sizeof(void *)) |
| *(void **)(ret + pad - sizeof(void *)) = ret + pad; |
| ret += pad; |
| } else { |
| ret = NULL; |
| } |
| return ret; |
| } |
| |
| /* frees an area <area> of size <size> allocated by pool_alloc_area(). The |
| * semantics are identical to free() except that the size must absolutely match |
| * the one passed to pool_alloc_area(). In case some padding is added, the |
| * area's start address is compared to the one at the end of the padding, and |
| * a segfault is triggered if they don't match, indicating an underflow. |
| */ |
| void pool_free_area_uaf(void *area, size_t size) |
| { |
| size_t pad = (4096 - size) & 0xFF0; |
| |
| if (pad >= sizeof(void *) && *(void **)(area - sizeof(void *)) != area) |
| ABORT_NOW(); |
| |
| munmap(area - pad, (size + 4095) & -4096); |
| } |
| |
| #endif /* DEBUG_UAF */ |
| |
| /* |
| * This function destroys a pool by freeing it completely, unless it's still |
| * in use. This should be called only under extreme circumstances. It always |
| * returns NULL if the resulting pool is empty, easing the clearing of the old |
| * pointer, otherwise it returns the pool. |
| * . |
| */ |
| void *pool_destroy(struct pool_head *pool) |
| { |
| if (pool) { |
| pool_flush(pool); |
| if (pool->used) |
| return pool; |
| pool->users--; |
| if (!pool->users) { |
| LIST_DELETE(&pool->list); |
| /* note that if used == 0, the cache is empty */ |
| free(pool); |
| } |
| } |
| return NULL; |
| } |
| |
| /* This destroys all pools on exit. It is *not* thread safe. */ |
| void pool_destroy_all() |
| { |
| struct pool_head *entry, *back; |
| |
| list_for_each_entry_safe(entry, back, &pools, list) |
| pool_destroy(entry); |
| } |
| |
| /* This function dumps memory usage information into the trash buffer. */ |
| void dump_pools_to_trash() |
| { |
| struct pool_head *entry; |
| unsigned long allocated, used; |
| int nbpools; |
| #ifdef CONFIG_HAP_POOLS |
| unsigned long cached_bytes = 0; |
| uint cached = 0; |
| #endif |
| |
| allocated = used = nbpools = 0; |
| chunk_printf(&trash, "Dumping pools usage. Use SIGQUIT to flush them.\n"); |
| list_for_each_entry(entry, &pools, list) { |
| #ifdef CONFIG_HAP_POOLS |
| int i; |
| for (cached = i = 0; i < global.nbthread; i++) |
| cached += entry->cache[i].count; |
| cached_bytes += cached * entry->size; |
| #endif |
| chunk_appendf(&trash, " - Pool %s (%u bytes) : %u allocated (%u bytes), %u used" |
| #ifdef CONFIG_HAP_POOLS |
| " (~%u by thread caches)" |
| #endif |
| ", needed_avg %u, %u failures, %u users, @%p%s\n", |
| entry->name, entry->size, entry->allocated, |
| entry->size * entry->allocated, entry->used, |
| #ifdef CONFIG_HAP_POOLS |
| cached, |
| #endif |
| swrate_avg(entry->needed_avg, POOL_AVG_SAMPLES), entry->failed, |
| entry->users, entry, |
| (entry->flags & MEM_F_SHARED) ? " [SHARED]" : ""); |
| |
| allocated += entry->allocated * entry->size; |
| used += entry->used * entry->size; |
| nbpools++; |
| } |
| chunk_appendf(&trash, "Total: %d pools, %lu bytes allocated, %lu used" |
| #ifdef CONFIG_HAP_POOLS |
| " (~%lu by thread caches)" |
| #endif |
| ".\n", |
| nbpools, allocated, used |
| #ifdef CONFIG_HAP_POOLS |
| , cached_bytes |
| #endif |
| ); |
| } |
| |
| /* Dump statistics on pools usage. */ |
| void dump_pools(void) |
| { |
| dump_pools_to_trash(); |
| qfprintf(stderr, "%s", trash.area); |
| } |
| |
| /* This function returns the total number of failed pool allocations */ |
| int pool_total_failures() |
| { |
| struct pool_head *entry; |
| int failed = 0; |
| |
| list_for_each_entry(entry, &pools, list) |
| failed += entry->failed; |
| return failed; |
| } |
| |
| /* This function returns the total amount of memory allocated in pools (in bytes) */ |
| unsigned long pool_total_allocated() |
| { |
| struct pool_head *entry; |
| unsigned long allocated = 0; |
| |
| list_for_each_entry(entry, &pools, list) |
| allocated += entry->allocated * entry->size; |
| return allocated; |
| } |
| |
| /* This function returns the total amount of memory used in pools (in bytes) */ |
| unsigned long pool_total_used() |
| { |
| struct pool_head *entry; |
| unsigned long used = 0; |
| |
| list_for_each_entry(entry, &pools, list) |
| used += entry->used * entry->size; |
| return used; |
| } |
| |
| /* This function dumps memory usage information onto the stream interface's |
| * read buffer. It returns 0 as long as it does not complete, non-zero upon |
| * completion. No state is used. |
| */ |
| static int cli_io_handler_dump_pools(struct appctx *appctx) |
| { |
| struct stream_interface *si = appctx->owner; |
| |
| dump_pools_to_trash(); |
| if (ci_putchk(si_ic(si), &trash) == -1) { |
| si_rx_room_blk(si); |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* callback used to create early pool <name> of size <size> and store the |
| * resulting pointer into <ptr>. If the allocation fails, it quits with after |
| * emitting an error message. |
| */ |
| void create_pool_callback(struct pool_head **ptr, char *name, unsigned int size) |
| { |
| *ptr = create_pool(name, size, MEM_F_SHARED); |
| if (!*ptr) { |
| ha_alert("Failed to allocate pool '%s' of size %u : %s. Aborting.\n", |
| name, size, strerror(errno)); |
| exit(1); |
| } |
| } |
| |
| /* Initializes all per-thread arrays on startup */ |
| static void init_pools() |
| { |
| #ifdef CONFIG_HAP_POOLS |
| int thr; |
| |
| for (thr = 0; thr < MAX_THREADS; thr++) { |
| LIST_INIT(&ha_thread_ctx[thr].pool_lru_head); |
| } |
| #endif |
| detect_allocator(); |
| } |
| |
| INITCALL0(STG_PREPARE, init_pools); |
| |
| /* Report in build options if trim is supported */ |
| static void pools_register_build_options(void) |
| { |
| if (is_trim_enabled()) { |
| char *ptr = NULL; |
| memprintf(&ptr, "Support for malloc_trim() is enabled."); |
| hap_register_build_opts(ptr, 1); |
| } |
| } |
| INITCALL0(STG_REGISTER, pools_register_build_options); |
| |
| /* register cli keywords */ |
| static struct cli_kw_list cli_kws = {{ },{ |
| { { "show", "pools", NULL }, "show pools : report information about the memory pools usage", NULL, cli_io_handler_dump_pools }, |
| {{},} |
| }}; |
| |
| INITCALL1(STG_REGISTER, cli_register_kw, &cli_kws); |
| |
| #ifdef DEBUG_FAIL_ALLOC |
| |
| int mem_should_fail(const struct pool_head *pool) |
| { |
| int ret = 0; |
| |
| if (mem_fail_rate > 0 && !(global.mode & MODE_STARTING)) { |
| if (mem_fail_rate > statistical_prng_range(100)) |
| ret = 1; |
| else |
| ret = 0; |
| } |
| return ret; |
| |
| } |
| |
| /* config parser for global "tune.fail-alloc" */ |
| static int mem_parse_global_fail_alloc(char **args, int section_type, struct proxy *curpx, |
| const struct proxy *defpx, const char *file, int line, |
| char **err) |
| { |
| if (too_many_args(1, args, err, NULL)) |
| return -1; |
| mem_fail_rate = atoi(args[1]); |
| if (mem_fail_rate < 0 || mem_fail_rate > 100) { |
| memprintf(err, "'%s' expects a numeric value between 0 and 100.", args[0]); |
| return -1; |
| } |
| return 0; |
| } |
| #endif |
| |
| /* register global config keywords */ |
| static struct cfg_kw_list mem_cfg_kws = {ILH, { |
| #ifdef DEBUG_FAIL_ALLOC |
| { CFG_GLOBAL, "tune.fail-alloc", mem_parse_global_fail_alloc }, |
| #endif |
| { 0, NULL, NULL } |
| }}; |
| |
| INITCALL1(STG_REGISTER, cfg_register_keywords, &mem_cfg_kws); |
| |
| /* |
| * Local variables: |
| * c-indent-level: 8 |
| * c-basic-offset: 8 |
| * End: |
| */ |