| #REGTEST_TYPE=broken |
| |
| # This reg-test checks that the connection and SSL sample fetches related to |
| # errors are functioning properly. It also tests the proper behaviour of the |
| # default HTTPS log format and of the dontloglegacyconnerr option which enables |
| # or disables the output of a special error message in case of connection |
| # failure (otherwise a line following the configured log-format is output). |
| # |
| # It works by sending request through three different paths, one using a custom |
| # log-format line that contains the connection error and SSL handshake error |
| # sample fetches, one using the default HTTPS log-format and one using the |
| # legacy error log format. |
| # |
| # The output log lines are caught by syslog blocks (one for each path) and |
| # compared to an expected format. |
| # Since the syslog is not by design synchronized with the Varnish clients and |
| # servers, synchronization is achieved through barriers, which ensure that |
| # syslog messages arrive in the right order. |
| # |
| # In order to ensure that the log line raised in case of connection error if |
| # the dontloglegacyconnerr option is disabled still follows the |
| # log-separate-error option, the log lines raised by the https_fmt_lst listener |
| # will be sent to two separate syslog servers. |
| # |
| |
| varnishtest "Test the connection and SSL error fetches." |
| feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.5-dev2)'" |
| feature cmd "$HAPROXY_PROGRAM -cc 'feature(OPENSSL)'" |
| feature cmd "command -v socat" |
| feature ignore_unknown_macro |
| |
| server s1 -repeat 3 { |
| rxreq |
| txresp |
| } -start |
| |
| barrier b1 cond 4 -cyclic |
| |
| |
| syslog Slg_cust_fmt -level info { |
| recv |
| expect ~ ".*conn_status:\"0:Success\" hsk_err:\"0:-\"" |
| |
| barrier b1 sync |
| |
| recv |
| expect ~ ".*conn_status:\"30:SSL client CA chain cannot be verified\" hsk_err:\"337100934:error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed\"" |
| |
| barrier b1 sync |
| |
| recv |
| expect ~ ".*conn_status:\"31:SSL client certificate not trusted\" hsk_err:\"337100934:error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed\"" |
| |
| barrier b1 sync |
| |
| recv |
| expect ~ ".*conn_status:\"34:SSL handshake failure\" hsk_err:\"337678529:error:142090C1:SSL routines:tls_early_post_process_client_hello:no shared cipher\"" |
| } -start |
| |
| syslog Slg_https_fmt -level info { |
| recv |
| expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/s1.*0/0000000000000000/0/0 TLSv1.3/TLS_AES_256_GCM_SHA384" |
| |
| barrier b1 sync |
| } -start |
| |
| syslog Slg_https_fmt_err -level info { |
| recv |
| expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*30/000000001417C086/0/2 TLSv1.3/TLS_AES_256_GCM_SHA384" |
| |
| barrier b1 sync |
| |
| recv |
| expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*31/000000001417C086/20/0 TLSv1.3/TLS_AES_256_GCM_SHA384" |
| |
| barrier b1 sync |
| |
| recv |
| expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*34/00000000142090C1/0/0 TLSv1.3/\\(NONE\\)" |
| } -start |
| |
| syslog Slg_logconnerror -level info { |
| recv |
| expect ~ ".*logconnerror_ssl_lst~ logconnerror_ssl_lst/s1" |
| |
| barrier b1 sync |
| |
| recv |
| expect ~ ".*logconnerror_ssl_lst/1: SSL client CA chain cannot be verified" |
| |
| barrier b1 sync |
| |
| recv |
| expect ~ ".*logconnerror_ssl_lst/1: SSL client certificate not trusted" |
| |
| barrier b1 sync |
| |
| recv |
| expect ~ ".*logconnerror_ssl_lst/1: SSL handshake failure" |
| } -start |
| |
| |
| haproxy h1 -conf { |
| global |
| tune.ssl.default-dh-param 2048 |
| tune.ssl.capture-cipherlist-size 1 |
| stats socket "${tmpdir}/h1/stats" level admin |
| |
| defaults |
| timeout connect 100ms |
| timeout client 1s |
| timeout server 1s |
| retries 0 |
| |
| listen clear_lst |
| bind "fd@${clearlst}" |
| default-server ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none no-ssl-reuse |
| |
| balance roundrobin |
| server cust_fmt "${tmpdir}/cust_logfmt_ssl.sock" |
| server https_fmt "${tmpdir}/https_logfmt_ssl.sock" |
| server logconnerror "${tmpdir}/logconnerror_ssl.sock" |
| |
| |
| listen clear_wrong_ciphers_lst |
| bind "fd@${wrongcipherslst}" |
| default-server ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none no-ssl-reuse ciphersuites "TLS_AES_128_GCM_SHA256" |
| |
| balance roundrobin |
| server cust_fmt "${tmpdir}/cust_logfmt_ssl.sock" |
| server https_fmt "${tmpdir}/https_logfmt_ssl.sock" |
| server logconnerror "${tmpdir}/logconnerror_ssl.sock" |
| |
| |
| listen cust_logfmt_ssl_lst |
| log ${Slg_cust_fmt_addr}:${Slg_cust_fmt_port} local0 |
| option dontloglegacyconnerr |
| mode http |
| log-format "conn_status:\"%[fc_conn_err]:%[fc_conn_err_str]\" hsk_err:\"%[ssl_fc_hsk_err]:%[ssl_fc_hsk_err_str]\"" |
| bind "${tmpdir}/cust_logfmt_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphersuites "TLS_AES_256_GCM_SHA384" |
| server s1 ${s1_addr}:${s1_port} |
| |
| listen https_logfmt_ssl_lst |
| log ${Slg_https_fmt_addr}:${Slg_https_fmt_port} local0 info |
| log ${Slg_https_fmt_err_addr}:${Slg_https_fmt_err_port} local0 err info |
| option dontloglegacyconnerr |
| option log-separate-errors |
| mode http |
| option httpslog |
| bind "${tmpdir}/https_logfmt_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphersuites "TLS_AES_256_GCM_SHA384" |
| server s1 ${s1_addr}:${s1_port} |
| |
| listen logconnerror_ssl_lst |
| log ${Slg_logconnerror_addr}:${Slg_logconnerror_port} local0 info |
| mode http |
| option httplog |
| bind "${tmpdir}/logconnerror_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphersuites "TLS_AES_256_GCM_SHA384" |
| server s1 ${s1_addr}:${s1_port} |
| |
| } -start |
| |
| |
| # The three following requests should all succeed |
| client c1 -connect ${h1_clearlst_sock} { |
| txreq |
| rxresp |
| expect resp.status == 200 |
| } -run |
| |
| client c2 -connect ${h1_clearlst_sock} { |
| txreq |
| rxresp |
| expect resp.status == 200 |
| } -run |
| |
| client c3 -connect ${h1_clearlst_sock} { |
| txreq |
| rxresp |
| expect resp.status == 200 |
| } -run |
| |
| |
| barrier b1 sync |
| |
| |
| # Change the root CA in the frontends |
| shell { |
| printf "set ssl ca-file ${testdir}/set_cafile_rootCA.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n\n" | socat "${tmpdir}/h1/stats" - |
| echo "commit ssl ca-file ${testdir}/set_cafile_rootCA.crt" | socat "${tmpdir}/h1/stats" - |
| } |
| |
| client c4 -connect ${h1_clearlst_sock} { |
| txreq |
| } -run |
| |
| client c5 -connect ${h1_clearlst_sock} { |
| txreq |
| } -run |
| |
| client c6 -connect ${h1_clearlst_sock} { |
| txreq |
| } -run |
| |
| barrier b1 sync |
| |
| |
| |
| # Restore the root CA |
| shell { |
| printf "set ssl ca-file ${testdir}/set_cafile_rootCA.crt <<\n$(cat ${testdir}/set_cafile_rootCA.crt)\n\n" | socat "${tmpdir}/h1/stats" - |
| echo "commit ssl ca-file ${testdir}/set_cafile_rootCA.crt" | socat "${tmpdir}/h1/stats" - |
| } |
| |
| # Change the intermediate CA in the frontends |
| shell { |
| printf "set ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_interCA2.crt)\n\n" | socat "${tmpdir}/h1/stats" - |
| echo "commit ssl ca-file ${testdir}/set_cafile_interCA1.crt" | socat "${tmpdir}/h1/stats" - |
| } |
| |
| client c7 -connect ${h1_clearlst_sock} { |
| txreq |
| } -run |
| |
| client c8 -connect ${h1_clearlst_sock} { |
| txreq |
| } -run |
| |
| client c9 -connect ${h1_clearlst_sock} { |
| txreq |
| } -run |
| |
| barrier b1 sync |
| |
| |
| # Restore the intermediate CA in the frontends |
| shell { |
| printf "set ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n\n" | socat "${tmpdir}/h1/stats" - |
| echo "commit ssl ca-file ${testdir}/set_cafile_interCA1.crt" | socat "${tmpdir}/h1/stats" - |
| } |
| |
| # "No shared cipher" errors |
| client c10 -connect ${h1_wrongcipherslst_sock} { |
| txreq |
| } -run |
| client c11 -connect ${h1_wrongcipherslst_sock} { |
| txreq |
| } -run |
| client c12 -connect ${h1_wrongcipherslst_sock} { |
| txreq |
| } -run |
| |
| syslog Slg_cust_fmt -wait |
| syslog Slg_https_fmt -wait |
| syslog Slg_https_fmt_err -wait |
| syslog Slg_logconnerror -wait |