| /* |
| * General purpose functions. |
| * |
| * Copyright 2000-2007 Willy Tarreau <w@1wt.eu> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <netdb.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <netinet/in.h> |
| #include <arpa/inet.h> |
| |
| #include <common/config.h> |
| #include <common/standard.h> |
| #include <proto/log.h> |
| |
| /* enough to store 2^64-1 = 18446744073709551615 */ |
| static char itoa_str[21]; |
| |
| /* |
| * copies at most <size-1> chars from <src> to <dst>. Last char is always |
| * set to 0, unless <size> is 0. The number of chars copied is returned |
| * (excluding the terminating zero). |
| * This code has been optimized for size and speed : on x86, it's 45 bytes |
| * long, uses only registers, and consumes only 4 cycles per char. |
| */ |
| int strlcpy2(char *dst, const char *src, int size) |
| { |
| char *orig = dst; |
| if (size) { |
| while (--size && (*dst = *src)) { |
| src++; dst++; |
| } |
| *dst = 0; |
| } |
| return dst - orig; |
| } |
| |
| /* |
| * This function simply returns a statically allocated string containing |
| * the ascii representation for number 'n' in decimal. |
| */ |
| char *ultoa(unsigned long n) |
| { |
| char *pos; |
| |
| pos = itoa_str + sizeof(itoa_str) - 1; |
| *pos-- = '\0'; |
| |
| do { |
| *pos-- = '0' + n % 10; |
| n /= 10; |
| } while (n && pos >= itoa_str); |
| return pos + 1; |
| } |
| |
| |
| /* |
| * Returns non-zero if character <s> is a hex digit (0-9, a-f, A-F), else zero. |
| * |
| * It looks like this one would be a good candidate for inlining, but this is |
| * not interesting because it around 35 bytes long and often called multiple |
| * times within the same function. |
| */ |
| int ishex(char s) |
| { |
| s -= '0'; |
| if ((unsigned char)s <= 9) |
| return 1; |
| s -= 'A' - '0'; |
| if ((unsigned char)s <= 5) |
| return 1; |
| s -= 'a' - 'A'; |
| if ((unsigned char)s <= 5) |
| return 1; |
| return 0; |
| } |
| |
| |
| /* |
| * converts <str> to a struct sockaddr_in* which is locally allocated. |
| * The format is "addr:port", where "addr" can be a dotted IPv4 address, |
| * a host name, or empty or "*" to indicate INADDR_ANY. |
| */ |
| struct sockaddr_in *str2sa(char *str) |
| { |
| static struct sockaddr_in sa; |
| char *c; |
| int port; |
| |
| memset(&sa, 0, sizeof(sa)); |
| str = strdup(str); |
| if (str == NULL) |
| goto out_nofree; |
| |
| if ((c = strrchr(str,':')) != NULL) { |
| *c++ = '\0'; |
| port = atol(c); |
| } |
| else |
| port = 0; |
| |
| if (*str == '*' || *str == '\0') { /* INADDR_ANY */ |
| sa.sin_addr.s_addr = INADDR_ANY; |
| } |
| else if (!inet_pton(AF_INET, str, &sa.sin_addr)) { |
| struct hostent *he; |
| |
| if ((he = gethostbyname(str)) == NULL) { |
| Alert("Invalid server name: '%s'\n", str); |
| } |
| else |
| sa.sin_addr = *(struct in_addr *) *(he->h_addr_list); |
| } |
| sa.sin_port = htons(port); |
| sa.sin_family = AF_INET; |
| |
| free(str); |
| out_nofree: |
| return &sa; |
| } |
| |
| /* |
| * converts <str> to two struct in_addr* which must be pre-allocated. |
| * The format is "addr[/mask]", where "addr" cannot be empty, and mask |
| * is optionnal and either in the dotted or CIDR notation. |
| * Note: "addr" can also be a hostname. Returns 1 if OK, 0 if error. |
| */ |
| int str2net(const char *str, struct in_addr *addr, struct in_addr *mask) |
| { |
| __label__ out_free, out_err; |
| char *c, *s; |
| int ret_val; |
| unsigned long len; |
| |
| s = strdup(str); |
| if (!s) |
| return 0; |
| |
| memset(mask, 0, sizeof(*mask)); |
| memset(addr, 0, sizeof(*addr)); |
| |
| if ((c = strrchr(s, '/')) != NULL) { |
| *c++ = '\0'; |
| /* c points to the mask */ |
| if (strchr(c, '.') != NULL) { /* dotted notation */ |
| if (!inet_pton(AF_INET, c, mask)) |
| goto out_err; |
| } |
| else { /* mask length */ |
| char *err; |
| len = strtol(c, &err, 10); |
| if (!*c || (err && *err) || (unsigned)len > 32) |
| goto out_err; |
| if (len) |
| mask->s_addr = htonl(~0UL << (32 - len)); |
| else |
| mask->s_addr = 0; |
| } |
| } |
| else { |
| mask->s_addr = ~0U; |
| } |
| if (!inet_pton(AF_INET, s, addr)) { |
| struct hostent *he; |
| |
| if ((he = gethostbyname(s)) == NULL) { |
| goto out_err; |
| } |
| else |
| *addr = *(struct in_addr *) *(he->h_addr_list); |
| } |
| |
| ret_val = 1; |
| out_free: |
| free(s); |
| return ret_val; |
| out_err: |
| ret_val = 0; |
| goto out_free; |
| } |
| |
| /* will try to encode the string <string> replacing all characters tagged in |
| * <map> with the hexadecimal representation of their ASCII-code (2 digits) |
| * prefixed by <escape>, and will store the result between <start> (included) |
| * and <stop> (excluded), and will always terminate the string with a '\0' |
| * before <stop>. The position of the '\0' is returned if the conversion |
| * completes. If bytes are missing between <start> and <stop>, then the |
| * conversion will be incomplete and truncated. If <stop> <= <start>, the '\0' |
| * cannot even be stored so we return <start> without writing the 0. |
| * The input string must also be zero-terminated. |
| */ |
| const char hextab[16] = "0123456789ABCDEF"; |
| char *encode_string(char *start, char *stop, |
| const char escape, const fd_set *map, |
| const char *string) |
| { |
| if (start < stop) { |
| stop--; /* reserve one byte for the final '\0' */ |
| while (start < stop && *string != '\0') { |
| if (!FD_ISSET((unsigned char)(*string), map)) |
| *start++ = *string; |
| else { |
| if (start + 3 >= stop) |
| break; |
| *start++ = escape; |
| *start++ = hextab[(*string >> 4) & 15]; |
| *start++ = hextab[*string & 15]; |
| } |
| string++; |
| } |
| *start = '\0'; |
| } |
| return start; |
| } |
| |
| |
| unsigned int str2ui(const char *s) |
| { |
| return __str2ui(s); |
| } |
| |
| unsigned int str2uic(const char *s) |
| { |
| return __str2uic(s); |
| } |
| |
| unsigned int strl2ui(const char *s, int len) |
| { |
| return __strl2ui(s, len); |
| } |
| |
| unsigned int strl2uic(const char *s, int len) |
| { |
| return __strl2uic(s, len); |
| } |
| |
| /* This one is 7 times faster than strtol() on athlon with checks. |
| * It returns the value of the number composed of all valid digits read, |
| * and can process negative numbers too. |
| */ |
| int strl2ic(const char *s, int len) |
| { |
| int i = 0; |
| int j, k; |
| |
| if (len > 0) { |
| if (*s != '-') { |
| /* positive number */ |
| while (len-- > 0) { |
| j = (*s++) - '0'; |
| k = i * 10; |
| if (j > 9) |
| break; |
| i = k + j; |
| } |
| } else { |
| /* negative number */ |
| s++; |
| while (--len > 0) { |
| j = (*s++) - '0'; |
| k = i * 10; |
| if (j > 9) |
| break; |
| i = k - j; |
| } |
| } |
| } |
| return i; |
| } |
| |
| |
| /* This function reads exactly <len> chars from <s> and converts them to a |
| * signed integer which it stores into <ret>. It accurately detects any error |
| * (truncated string, invalid chars, overflows). It is meant to be used in |
| * applications designed for hostile environments. It returns zero when the |
| * number has successfully been converted, non-zero otherwise. When an error |
| * is returned, the <ret> value is left untouched. It is yet 5 to 40 times |
| * faster than strtol(). |
| */ |
| int strl2irc(const char *s, int len, int *ret) |
| { |
| int i = 0; |
| int j; |
| |
| if (!len) |
| return 1; |
| |
| if (*s != '-') { |
| /* positive number */ |
| while (len-- > 0) { |
| j = (*s++) - '0'; |
| if (j > 9) return 1; /* invalid char */ |
| if (i > INT_MAX / 10) return 1; /* check for multiply overflow */ |
| i = i * 10; |
| if (i + j < i) return 1; /* check for addition overflow */ |
| i = i + j; |
| } |
| } else { |
| /* negative number */ |
| s++; |
| while (--len > 0) { |
| j = (*s++) - '0'; |
| if (j > 9) return 1; /* invalid char */ |
| if (i < INT_MIN / 10) return 1; /* check for multiply overflow */ |
| i = i * 10; |
| if (i - j > i) return 1; /* check for subtract overflow */ |
| i = i - j; |
| } |
| } |
| *ret = i; |
| return 0; |
| } |
| |
| |
| /* This function reads exactly <len> chars from <s> and converts them to a |
| * signed integer which it stores into <ret>. It accurately detects any error |
| * (truncated string, invalid chars, overflows). It is meant to be used in |
| * applications designed for hostile environments. It returns zero when the |
| * number has successfully been converted, non-zero otherwise. When an error |
| * is returned, the <ret> value is left untouched. It is about 3 times slower |
| * than str2irc(). |
| */ |
| #ifndef LLONG_MAX |
| #define LLONG_MAX 9223372036854775807LL |
| #define LLONG_MIN (-LLONG_MAX - 1LL) |
| #endif |
| |
| int strl2llrc(const char *s, int len, long long *ret) |
| { |
| long long i = 0; |
| int j; |
| |
| if (!len) |
| return 1; |
| |
| if (*s != '-') { |
| /* positive number */ |
| while (len-- > 0) { |
| j = (*s++) - '0'; |
| if (j > 9) return 1; /* invalid char */ |
| if (i > LLONG_MAX / 10LL) return 1; /* check for multiply overflow */ |
| i = i * 10LL; |
| if (i + j < i) return 1; /* check for addition overflow */ |
| i = i + j; |
| } |
| } else { |
| /* negative number */ |
| s++; |
| while (--len > 0) { |
| j = (*s++) - '0'; |
| if (j > 9) return 1; /* invalid char */ |
| if (i < LLONG_MIN / 10LL) return 1; /* check for multiply overflow */ |
| i = i * 10LL; |
| if (i - j > i) return 1; /* check for subtract overflow */ |
| i = i - j; |
| } |
| } |
| *ret = i; |
| return 0; |
| } |
| |
| |
| /* |
| * Local variables: |
| * c-indent-level: 8 |
| * c-basic-offset: 8 |
| * End: |
| */ |