reg-tests/ssl/set_ssl_cert.vtc

#REGTEST_TYPE=devel

# This reg-test uses the "set ssl cert" command to update a certificate over the CLI.
# It requires socat to upload the certificate
#
# This check has two separate parts.
# In the first part, there are 3 requests, the first one will use "www.test1.com" as SNI,
# the second one with the same but that must fail and the third one will use
# "localhost". Since vtest can't do SSL, we use haproxy as an SSL client with 2
# chained listen section.
#
# In the second part, we check the update of a default certificate in a crt-list.
# This corresponds to a bug raised in https://github.com/haproxy/haproxy/issues/1143.
# A certificate is used as default certificate as well as regular one, and during the update
# the default certificate would not be properly updated if the default instance did not have
# any SNI. The test consists in checking that the used certificate is the right one after
# updating it via a "set ssl cert" call.
#
# If this test does not work anymore:
# - Check that you have socat

varnishtest "Test the 'set ssl cert' feature of the CLI"
#REQUIRE_VERSION=2.2
#REQUIRE_OPTIONS=OPENSSL
#REQUIRE_BINARIES=socat
feature ignore_unknown_macro

server s1 -repeat 9 {
  rxreq
  txresp
} -start

haproxy h1 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-cipherlist-size 1
        stats socket "${tmpdir}/h1/stats" level admin
        crt-base ${testdir}

    defaults
        mode http
        option httplog
        ${no-htx} option http-use-htx
        log stderr local0 debug err
        option logasap
        timeout connect 100ms
        timeout client  1s
        timeout server  1s

    listen clear-lst
        bind "fd@${clearlst}"
        balance roundrobin

        http-response set-header X-SSL-Server-SHA1 %[ssl_s_sha1,hex]

        retries 0 # 2nd SSL connection must fail so skip the retry
        server s1 "${tmpdir}/ssl.sock" ssl verify none sni str(www.test1.com)
        server s2 "${tmpdir}/ssl.sock" ssl verify none sni str(www.test1.com)
        server s3 "${tmpdir}/ssl.sock" ssl verify none sni str(localhost)

        server s4 "${tmpdir}/other-ssl.sock" ssl verify none sni str(www.test1.com)
        server s5 "${tmpdir}/other-ssl.sock" ssl verify none sni str(other.test1.com) # uses the default certificate
        server s6 "${tmpdir}/other-ssl.sock" ssl verify none sni str(www.test1.com)
        server s7 "${tmpdir}/other-ssl.sock" ssl verify none sni str(other.test1.com) # uses the default certificate

        server s8 "${tmpdir}/other-ssl.sock" ssl verify none sni str(www.test1.com)
        server s9 "${tmpdir}/other-ssl.sock" ssl verify none sni str(other.test1.com) # uses the default certificate

    listen ssl-lst
        bind "${tmpdir}/ssl.sock" ssl crt ${testdir}/common.pem strict-sni
        server s1 ${s1_addr}:${s1_port}

    listen other-ssl-lst
        bind "${tmpdir}/other-ssl.sock" ssl crt-list ${testdir}/set_default_cert.crt-list
        server s1 ${s1_addr}:${s1_port}

} -start


haproxy h1 -cli {
    send "show ssl cert ${testdir}/common.pem"
    expect ~ ".*SHA1 FingerPrint: 2195C9F0FD58470313013FC27C1B9CF9864BD1C6"
}

client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run

shell {
    printf "set ssl cert ${testdir}/common.pem <<\n$(cat ${testdir}/ecdsa.pem)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl cert ${testdir}/common.pem" | socat "${tmpdir}/h1/stats" -
}

haproxy h1 -cli {
    send "show ssl cert ${testdir}/common.pem"
    expect ~ ".*SHA1 FingerPrint: A490D069DBAFBEE66DE434BEC34030ADE8BCCBF1"
}

# check that the "www.test1.com" SNI was removed
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 503
} -run

client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run

shell {
    printf "set ssl cert ${testdir}/common.pem <<\n$(cat ${testdir}/common.pem)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "abort ssl cert ${testdir}/common.pem" | socat "${tmpdir}/h1/stats" -
}

haproxy h1 -cli {
    send "show ssl cert ${testdir}/common.pem"
    expect ~ ".*SHA1 FingerPrint: A490D069DBAFBEE66DE434BEC34030ADE8BCCBF1"
}



# The following requests are aimed at a backend that uses the set_default_cert.crt-list file

# Uses the www.test1.com sni
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "9DC18799428875976DDE706E9956035EE88A4CB3"
    expect resp.status == 200
} -run

# Uses the other.test1.com sni and the default line of the crt-list
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "9DC18799428875976DDE706E9956035EE88A4CB3"
    expect resp.status == 200
} -run

shell {
    printf "set ssl cert ${testdir}/set_default_cert.pem <<\n$(cat ${testdir}/common.pem)\n\n" | socat "${tmpdir}/h1/stats" -
}

# Certificate should not have changed yet
haproxy h1 -cli {
    send "show ssl cert ${testdir}/set_default_cert.pem"
    expect ~ ".*SHA1 FingerPrint: 9DC18799428875976DDE706E9956035EE88A4CB3"
}

shell {
    echo "commit ssl cert ${testdir}/set_default_cert.pem" | socat "${tmpdir}/h1/stats" -
}

haproxy h1 -cli {
    send "show ssl cert ${testdir}/set_default_cert.pem"
    expect ~ ".*SHA1 FingerPrint: 2195C9F0FD58470313013FC27C1B9CF9864BD1C6"
}

# Uses the www.test1.com sni
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "2195C9F0FD58470313013FC27C1B9CF9864BD1C6"
    expect resp.status == 200
} -run

# Uses the other.test1.com sni and the default line of the crt-list
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "2195C9F0FD58470313013FC27C1B9CF9864BD1C6"
    expect resp.status == 200
} -run

# Restore original certificate
shell {
    printf "set ssl cert ${testdir}/set_default_cert.pem <<\n$(cat ${testdir}/set_default_cert.pem)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl cert ${testdir}/set_default_cert.pem" | socat "${tmpdir}/h1/stats" -
}

haproxy h1 -cli {
    send "show ssl cert ${testdir}/set_default_cert.pem"
    expect ~ ".*SHA1 FingerPrint: 9DC18799428875976DDE706E9956035EE88A4CB"
}

# Uses the www.test1.com sni
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "9DC18799428875976DDE706E9956035EE88A4CB3"
    expect resp.status == 200
} -run

# Uses the other.test1.com sni and the default line of the crt-list
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.http.X-SSL-Server-SHA1 == "9DC18799428875976DDE706E9956035EE88A4CB3"
    expect resp.status == 200
} -run