| /* |
| * Protocol registration and listener management functions. |
| * |
| * Copyright 2000-2010 Willy Tarreau <w@1wt.eu> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <stdio.h> |
| #include <string.h> |
| |
| #include <common/config.h> |
| #include <common/errors.h> |
| #include <common/mini-clist.h> |
| #include <common/standard.h> |
| |
| #include <proto/acl.h> |
| #include <proto/fd.h> |
| |
| /* List head of all registered protocols */ |
| static struct list protocols = LIST_HEAD_INIT(protocols); |
| |
| /* This function adds the specified listener's file descriptor to the polling |
| * lists if it is in the LI_LISTEN state. The listener enters LI_READY or |
| * LI_FULL state depending on its number of connections. |
| */ |
| void enable_listener(struct listener *listener) |
| { |
| if (listener->state == LI_LISTEN) { |
| if (listener->nbconn < listener->maxconn) { |
| EV_FD_SET(listener->fd, DIR_RD); |
| listener->state = LI_READY; |
| } else { |
| listener->state = LI_FULL; |
| } |
| } |
| } |
| |
| /* This function removes the specified listener's file descriptor from the |
| * polling lists if it is in the LI_READY or in the LI_FULL state. The listener |
| * enters LI_LISTEN. |
| */ |
| void disable_listener(struct listener *listener) |
| { |
| if (listener->state < LI_READY) |
| return; |
| if (listener->state == LI_READY) |
| EV_FD_CLR(listener->fd, DIR_RD); |
| if (listener->state == LI_LIMITED) |
| LIST_DEL(&listener->wait_queue); |
| listener->state = LI_LISTEN; |
| } |
| |
| /* This function tries to temporarily disable a listener, depending on the OS |
| * capabilities. Linux unbinds the listen socket after a SHUT_RD, and ignores |
| * SHUT_WR. Solaris refuses either shutdown(). OpenBSD ignores SHUT_RD but |
| * closes upon SHUT_WR and refuses to rebind. So a common validation path |
| * involves SHUT_WR && listen && SHUT_RD. In case of success, the FD's polling |
| * is disabled. It normally returns non-zero, unless an error is reported. |
| */ |
| int pause_listener(struct listener *l) |
| { |
| if (l->state <= LI_PAUSED) |
| return 1; |
| |
| if (shutdown(l->fd, SHUT_WR) != 0) |
| return 0; /* Solaris dies here */ |
| |
| if (listen(l->fd, l->backlog ? l->backlog : l->maxconn) != 0) |
| return 0; /* OpenBSD dies here */ |
| |
| if (shutdown(l->fd, SHUT_RD) != 0) |
| return 0; /* should always be OK */ |
| |
| if (l->state == LI_LIMITED) |
| LIST_DEL(&l->wait_queue); |
| |
| EV_FD_CLR(l->fd, DIR_RD); |
| l->state = LI_PAUSED; |
| return 1; |
| } |
| |
| /* This function tries to resume a temporarily disabled listener. Paused, full, |
| * limited and disabled listeners are handled, which means that this function |
| * may replace enable_listener(). The resulting state will either be LI_READY |
| * or LI_FULL. 0 is returned in case of failure to resume (eg: dead socket). |
| */ |
| int resume_listener(struct listener *l) |
| { |
| if (l->state < LI_PAUSED) |
| return 0; |
| |
| if (l->state == LI_PAUSED && |
| listen(l->fd, l->backlog ? l->backlog : l->maxconn) != 0) |
| return 0; |
| |
| if (l->state == LI_READY) |
| return 1; |
| |
| if (l->state == LI_LIMITED) |
| LIST_DEL(&l->wait_queue); |
| |
| if (l->nbconn >= l->maxconn) { |
| l->state = LI_FULL; |
| return 1; |
| } |
| |
| EV_FD_SET(l->fd, DIR_RD); |
| l->state = LI_READY; |
| return 1; |
| } |
| |
| /* Marks a ready listener as full so that the session code tries to re-enable |
| * it upon next close() using resume_listener(). |
| */ |
| void listener_full(struct listener *l) |
| { |
| if (l->state >= LI_READY) { |
| if (l->state == LI_LIMITED) |
| LIST_DEL(&l->wait_queue); |
| |
| EV_FD_CLR(l->fd, DIR_RD); |
| l->state = LI_FULL; |
| } |
| } |
| |
| /* Marks a ready listener as limited so that we only try to re-enable it when |
| * resources are free again. It will be queued into the specified queue. |
| */ |
| void limit_listener(struct listener *l, struct list *list) |
| { |
| if (l->state == LI_READY) { |
| LIST_ADDQ(list, &l->wait_queue); |
| EV_FD_CLR(l->fd, DIR_RD); |
| l->state = LI_LIMITED; |
| } |
| } |
| |
| /* This function adds all of the protocol's listener's file descriptors to the |
| * polling lists when they are in the LI_LISTEN state. It is intended to be |
| * used as a protocol's generic enable_all() primitive, for use after the |
| * fork(). It puts the listeners into LI_READY or LI_FULL states depending on |
| * their number of connections. It always returns ERR_NONE. |
| */ |
| int enable_all_listeners(struct protocol *proto) |
| { |
| struct listener *listener; |
| |
| list_for_each_entry(listener, &proto->listeners, proto_list) |
| enable_listener(listener); |
| return ERR_NONE; |
| } |
| |
| /* This function removes all of the protocol's listener's file descriptors from |
| * the polling lists when they are in the LI_READY or LI_FULL states. It is |
| * intended to be used as a protocol's generic disable_all() primitive. It puts |
| * the listeners into LI_LISTEN, and always returns ERR_NONE. |
| */ |
| int disable_all_listeners(struct protocol *proto) |
| { |
| struct listener *listener; |
| |
| list_for_each_entry(listener, &proto->listeners, proto_list) |
| disable_listener(listener); |
| return ERR_NONE; |
| } |
| |
| /* Dequeues all of the listeners waiting for a resource in wait queue <queue>. */ |
| void dequeue_all_listeners(struct list *list) |
| { |
| struct listener *listener, *l_back; |
| |
| list_for_each_entry_safe(listener, l_back, list, wait_queue) { |
| /* This cannot fail because the listeners are by definition in |
| * the LI_LIMITED state. The function also removes the entry |
| * from the queue. |
| */ |
| resume_listener(listener); |
| } |
| } |
| |
| /* This function closes the listening socket for the specified listener, |
| * provided that it's already in a listening state. The listener enters the |
| * LI_ASSIGNED state. It always returns ERR_NONE. This function is intended |
| * to be used as a generic function for standard protocols. |
| */ |
| int unbind_listener(struct listener *listener) |
| { |
| if (listener->state == LI_READY) |
| EV_FD_CLR(listener->fd, DIR_RD); |
| |
| if (listener->state == LI_LIMITED) |
| LIST_DEL(&listener->wait_queue); |
| |
| if (listener->state >= LI_PAUSED) { |
| fd_delete(listener->fd); |
| listener->state = LI_ASSIGNED; |
| } |
| return ERR_NONE; |
| } |
| |
| /* This function closes all listening sockets bound to the protocol <proto>, |
| * and the listeners end in LI_ASSIGNED state if they were higher. It does not |
| * detach them from the protocol. It always returns ERR_NONE. |
| */ |
| int unbind_all_listeners(struct protocol *proto) |
| { |
| struct listener *listener; |
| |
| list_for_each_entry(listener, &proto->listeners, proto_list) |
| unbind_listener(listener); |
| return ERR_NONE; |
| } |
| |
| /* Delete a listener from its protocol's list of listeners. The listener's |
| * state is automatically updated from LI_ASSIGNED to LI_INIT. The protocol's |
| * number of listeners is updated. Note that the listener must have previously |
| * been unbound. This is the generic function to use to remove a listener. |
| */ |
| void delete_listener(struct listener *listener) |
| { |
| if (listener->state != LI_ASSIGNED) |
| return; |
| listener->state = LI_INIT; |
| LIST_DEL(&listener->proto_list); |
| listener->proto->nb_listeners--; |
| } |
| |
| /* Registers the protocol <proto> */ |
| void protocol_register(struct protocol *proto) |
| { |
| LIST_ADDQ(&protocols, &proto->list); |
| } |
| |
| /* Unregisters the protocol <proto>. Note that all listeners must have |
| * previously been unbound. |
| */ |
| void protocol_unregister(struct protocol *proto) |
| { |
| LIST_DEL(&proto->list); |
| LIST_INIT(&proto->list); |
| } |
| |
| /* binds all listeners of all registered protocols. Returns a composition |
| * of ERR_NONE, ERR_RETRYABLE, ERR_FATAL. |
| */ |
| int protocol_bind_all(char *errmsg, int errlen) |
| { |
| struct protocol *proto; |
| int err; |
| |
| err = 0; |
| list_for_each_entry(proto, &protocols, list) { |
| if (proto->bind_all) { |
| err |= proto->bind_all(proto, errmsg, errlen); |
| if ( err & ERR_ABORT ) |
| break; |
| } |
| } |
| return err; |
| } |
| |
| /* unbinds all listeners of all registered protocols. They are also closed. |
| * This must be performed before calling exit() in order to get a chance to |
| * remove file-system based sockets and pipes. |
| * Returns a composition of ERR_NONE, ERR_RETRYABLE, ERR_FATAL, ERR_ABORT. |
| */ |
| int protocol_unbind_all(void) |
| { |
| struct protocol *proto; |
| int err; |
| |
| err = 0; |
| list_for_each_entry(proto, &protocols, list) { |
| if (proto->unbind_all) { |
| err |= proto->unbind_all(proto); |
| } |
| } |
| return err; |
| } |
| |
| /* enables all listeners of all registered protocols. This is intended to be |
| * used after a fork() to enable reading on all file descriptors. Returns a |
| * composition of ERR_NONE, ERR_RETRYABLE, ERR_FATAL. |
| */ |
| int protocol_enable_all(void) |
| { |
| struct protocol *proto; |
| int err; |
| |
| err = 0; |
| list_for_each_entry(proto, &protocols, list) { |
| if (proto->enable_all) { |
| err |= proto->enable_all(proto); |
| } |
| } |
| return err; |
| } |
| |
| /* disables all listeners of all registered protocols. This may be used before |
| * a fork() to avoid duplicating poll lists. Returns a composition of ERR_NONE, |
| * ERR_RETRYABLE, ERR_FATAL. |
| */ |
| int protocol_disable_all(void) |
| { |
| struct protocol *proto; |
| int err; |
| |
| err = 0; |
| list_for_each_entry(proto, &protocols, list) { |
| if (proto->disable_all) { |
| err |= proto->disable_all(proto); |
| } |
| } |
| return err; |
| } |
| |
| /************************************************************************/ |
| /* All supported ACL keywords must be declared here. */ |
| /************************************************************************/ |
| |
| /* set temp integer to the number of connexions to the same listening socket */ |
| static int |
| acl_fetch_dconn(struct proxy *px, struct session *l4, void *l7, int dir, |
| const struct arg *args, struct sample *smp) |
| { |
| smp->type = SMP_T_UINT; |
| smp->data.uint = l4->listener->nbconn; |
| return 1; |
| } |
| |
| /* set temp integer to the id of the socket (listener) */ |
| static int |
| acl_fetch_so_id(struct proxy *px, struct session *l4, void *l7, int dir, |
| const struct arg *args, struct sample *smp) |
| { |
| smp->type = SMP_T_UINT; |
| smp->data.uint = l4->listener->luid; |
| return 1; |
| } |
| |
| /* Note: must not be declared <const> as its list will be overwritten. |
| * Please take care of keeping this list alphabetically sorted. |
| */ |
| static struct acl_kw_list acl_kws = {{ },{ |
| { "dst_conn", acl_parse_int, acl_fetch_dconn, acl_match_int, ACL_USE_NOTHING, 0 }, |
| { "so_id", acl_parse_int, acl_fetch_so_id, acl_match_int, ACL_USE_NOTHING, 0 }, |
| { NULL, NULL, NULL, NULL }, |
| }}; |
| |
| __attribute__((constructor)) |
| static void __protocols_init(void) |
| { |
| acl_register_keywords(&acl_kws); |
| } |
| |
| /* |
| * Local variables: |
| * c-indent-level: 8 |
| * c-basic-offset: 8 |
| * End: |
| */ |