Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / dc7d3228370038edab8b7ffacea07517aedcf13b / drivers
  1. 4ee9b86 mmc: fsl_esdhc: drop i.MX DDR support code by Yangbo Lu · Mon Oct 21 18:09:09 2019 +0800
  2. d385697 mmc: fsl_esdhc: remove redundant DM_MMC checking by Yangbo Lu · Mon Oct 21 18:09:08 2019 +0800
  3. 77f2632 mmc: fsl_esdhc: make BLK as hard requirement of DM_MMC by Yangbo Lu · Mon Oct 21 18:09:07 2019 +0800
  4. aae1e58 Merge tag 'mips-pull-2019-10-25' of git://git.denx.de/u-boot-mips by Tom Rini · Fri Oct 25 20:07:24 2019 -0400
  5. e7c456e Merge branch '2019-10-24-ti-imports' by Tom Rini · Fri Oct 25 17:33:28 2019 -0400
  6. 521a4ef ram: k3-j721e: Add support for J721E DDR controller by Kevin Scholz · Mon Oct 07 19:26:36 2019 +0530
  7. 2c85dfd1 ram: k3-am654: Do not rely on default values for certain DDR register by James Doublesin · Mon Oct 07 14:04:27 2019 +0530
  8. b6a19f0 ram: k3-am654: add support for LPDDR4 and DDR3L DDRs by James Doublesin · Mon Oct 07 14:04:26 2019 +0530
  9. 56d31ae Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · Fri Oct 25 13:50:51 2019 -0400
  10. 510adb3 Merge tag 'u-boot-atmel-2020.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel by Tom Rini · Fri Oct 25 13:50:33 2019 -0400
  11. cd48940 Merge tag 'xilinx-for-v2020.01-part2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · Fri Oct 25 11:23:46 2019 -0400
  12. 399e4af mmc: mtk-sd: add a dts property cd-active-high for builtin-cd mode by developer · Wed Sep 25 17:45:38 2019 +0800
  13. 607faf7 mmc: mtk-sd: add support for MediaTek MT7620/MT7628 SoCs by developer · Wed Sep 25 17:45:37 2019 +0800
  14. 33272b6 net: mt7628-eth: add support to isolate LAN/WAN ports by developer · Wed Sep 25 17:45:35 2019 +0800
  15. ba57a6b net: mt7628-eth: free rx descriptor on receiving failure by developer · Wed Sep 25 17:45:34 2019 +0800
  16. a564411 net: mt7628-eth: make phy link up detection optional via DT by developer · Wed Sep 25 17:45:33 2019 +0800
  17. e4387bd net: mt7628-eth: remove hardcoded gpio settings and regmap-based phy reset by developer · Wed Sep 25 17:45:32 2019 +0800
  18. 065e7dd phy: mt76x8-usb-phy: add slew rate calibration and remove non-mt7628 part by developer · Wed Sep 25 17:45:31 2019 +0800
  19. 074393a reset: add reset controller driver for MediaTek MIPS platform by developer · Wed Sep 25 17:45:29 2019 +0800
  20. e194781 pinctrl: add support for MediaTek MT7628 by developer · Wed Sep 25 17:45:26 2019 +0800
  21. a546d15 spi: mt7621-spi: restore default register value after each xfer by developer · Wed Sep 25 17:45:25 2019 +0800
  22. fe93f59 spi: mt7621-spi: remove data cache and rewrite its xfer function by developer · Wed Sep 25 17:45:24 2019 +0800
  23. 7ad7bee spi: mt7621-spi: use clock frequency from clk driver by developer · Wed Sep 25 17:45:23 2019 +0800
  24. 2bef3c5 clk: add clock driver for MediaTek MT76x8 platform by developer · Wed Sep 25 17:45:21 2019 +0800
  25. 77c7c73 serial: serial_mtk: add non-DM version for SPL by developer · Wed Sep 25 17:45:18 2019 +0800
  26. 67d2b61 serial: serial_mtk: enable FIFO and disable flow control by developer · Wed Sep 25 17:45:17 2019 +0800
  27. 1100e49 drivers: nand: brcmnand: fix nand_chip ecc layout structure by William Zhang · Wed Sep 04 10:51:13 2019 -0700
  28. d9f9bfc nand: brcm: add BCM6368 support by Álvaro Fernández Rojas · Wed Aug 28 19:12:15 2019 +0200
  29. ed4e0f8 Merge branch '2019-10-24-UFS-support' by Tom Rini · Thu Oct 24 09:51:48 2019 -0400
  30. 9da57ea ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULP by Ye Li · Thu Oct 24 10:29:32 2019 -0300
  31. 9c24d01 usb: ehci-mx6: Fix bus enumeration for iMX7 SoCs by Igor Opaniuk · Thu Oct 10 16:09:35 2019 +0300
  32. ebddf49 arm64: zynqmp: Switch to xlnx-zynqmp-clk header by Michal Simek · Mon Oct 14 15:42:03 2019 +0200
  33. bce58b3 drivers: crypto: rsa_mod_exp: Add manual relocation for ops->mod_exp() by T Karthik Reddy · Sat Mar 16 15:23:02 2019 +0530
  34. 60d590e spi: zynqmp: Remove unused platform headers by Michal Simek · Mon Oct 14 12:55:47 2019 +0200
  35. 470e5fb gpio: zynq: Add gpio driver support for PMC gpio by Shubhrajyoti Datta · Wed Sep 18 12:10:31 2019 +0530
  36. c8a5307 gpio: zynq: Add gpio driver support for Versal by Ashok Reddy Soma · Mon Sep 16 03:35:16 2019 -0600
  37. 8ece072 firmware: zynqmp: Clean up zynqmp_power_probe by Michal Simek · Thu Oct 10 11:26:16 2019 +0200
  38. 4ca6e95 firmware: zynqmp: Report error when xilinx_pm_request called from EL3 by Michal Simek · Thu Oct 10 11:09:15 2019 +0200
  39. 4c3de37 arm64: zynqmp: Convert invoke_smc() to xilinx_pm_request() by Michal Simek · Fri Oct 04 15:35:45 2019 +0200
  40. 142fb5b arm64: versal: Rename versal_pm_request to xilinx_pm_request by Michal Simek · Fri Oct 04 15:52:43 2019 +0200
  41. 81efd2a arm64: xilinx: Move firmware functions from platform to driver by Michal Simek · Fri Oct 04 15:45:29 2019 +0200
  42. e50c104 arm64: versal: Clean pm_api_id usage by Michal Simek · Fri Oct 04 15:25:18 2019 +0200
  43. 3bd5610 misc: microchip_flexcom: introduce microchip_flexcom driver by Eugen Hristev · Wed Oct 09 09:23:39 2019 +0000
  44. b2adee6 phy: keystone-usb: handle the transition of the USB power domain by Jean-Jacques Hiblot · Wed Sep 11 11:33:56 2019 +0200
  45. 731a2a3 usb: dwc3: Kconfig: get rid of obsolete mode selection by Jean-Jacques Hiblot · Wed Sep 11 11:33:53 2019 +0200
  46. ce868d0 usb: dwc3: Add dwc3_of_parse() to get quirks information from DT by Jean-Jacques Hiblot · Wed Sep 11 11:33:52 2019 +0200
  47. 547df0d usb: dwc3-generic: if no max speed is specified in DT, assume super speed by Jean-Jacques Hiblot · Wed Sep 11 11:33:51 2019 +0200
  48. 175cd7c usb: dwc3-generic: add a new host driver that uses the dwc3 core by Jean-Jacques Hiblot · Wed Sep 11 11:33:50 2019 +0200
  49. 2bf2c35 usb: dwc3-generic: factorize code by Jean-Jacques Hiblot · Wed Sep 11 11:33:49 2019 +0200
  50. a33aa76 usb: dwc3-generic: use platdata by Jean-Jacques Hiblot · Wed Sep 11 11:33:48 2019 +0200
  51. 9f1b49c usb: dwc3: always use the inlined version of dwc3_host_init/dwc3_host_exit by Jean-Jacques Hiblot · Wed Sep 11 11:33:47 2019 +0200
  52. ad4142b usb: xhci: move xhci.h to include usb by Jean-Jacques Hiblot · Wed Sep 11 11:33:46 2019 +0200
  53. 73a1b8b usb: dwc3: switch to peripheral mode when exiting by Jean-Jacques Hiblot · Wed Sep 11 11:33:45 2019 +0200
  54. 810426d usb: host: remove the xhci-zynqmp driver by Jean-Jacques Hiblot · Wed Sep 11 11:33:44 2019 +0200
  55. 2736c67 mtd: Add TI HyperBus Memory Controller driver by Vignesh Raghavendra · Wed Oct 23 13:30:01 2019 +0530
  56. 5b9d800 mtd: cfi_flash: Use CONFIG_SYS_MONITOR_BASE only when defined by Vignesh Raghavendra · Wed Oct 23 13:30:00 2019 +0530
  57. f59396a ufs: Add glue layer driver for TI J721E devices by Faiz Abbas · Tue Oct 15 18:24:38 2019 +0530
  58. 204b2c2 ufs: Add Support for Cadence platform UFS driver by Faiz Abbas · Tue Oct 15 18:24:37 2019 +0530
  59. 5cc5107 ufs: Add Initial Support for UFS subsystem by Faiz Abbas · Tue Oct 15 18:24:36 2019 +0530
  60. 2094809 scsi: Add dma direction member to command structure by Faiz Abbas · Tue Oct 15 18:24:35 2019 +0530
  61. 3645a48 scsi: Retry inquiry 3 times to overcome Unit Attention condition by Faiz Abbas · Tue Oct 15 18:24:34 2019 +0530
  62. b26c614 scsi: Add max_bytes_per_req to scsi_platdata by Faiz Abbas · Tue Oct 15 18:24:33 2019 +0530
  63. 76a6fa6 scsi: Simplify scsi_read()/_write() by Faiz Abbas · Tue Oct 15 18:24:32 2019 +0530
  64. 2c7526a dm: pinctrl: fix for introduce PINCONF_RECURSIVE option by Patrick Delaunay · Mon Oct 21 15:02:40 2019 +0200
  65. 4c90629 pinctrl: Kconfig: remove duplicated nodes by Patrick Delaunay · Mon Oct 21 15:07:54 2019 +0200
  66. be5f8a5 Merge tag 'u-boot-amlogic-20191018' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic by Tom Rini · Fri Oct 18 16:36:44 2019 -0400
  67. 152b453 power: domain: add Amlogic Everything-Else power domain driver by Neil Armstrong · Fri Oct 11 15:12:19 2019 +0200
  68. 3e448bd clk: meson-sm1: add compatible by Neil Armstrong · Fri Oct 11 17:33:53 2019 +0200
  69. 1c0ca20 mmc: meson-gx: add support for mmc-pwrseq-emmc by Neil Armstrong · Fri Oct 11 17:33:52 2019 +0200
  70. bb18f7e video: meson: add compatible for Amlogic G12A by Neil Armstrong · Fri Aug 30 14:09:25 2019 +0200
  71. 57d6dfe video: meson: sync with linux drm-misc tree by Neil Armstrong · Fri Aug 30 14:09:24 2019 +0200
  72. 7e53a7c video: meson: remove power domain get by Neil Armstrong · Fri Aug 30 14:09:23 2019 +0200
  73. 4371b9c clk: meson: g12a: add support for VPU/HDMI clocks by Neil Armstrong · Fri Aug 30 14:09:22 2019 +0200
  74. 108f0af power: domain: meson-gx-pwrc: add G12A support by Neil Armstrong · Fri Aug 30 14:09:21 2019 +0200
  75. 211be3b gpio: sifive: add support for DM based gpio driver for FU540-SoC by Sagar Shrikant Kadam · Tue Oct 01 10:00:46 2019 -0700
  76. aeceb4c Merge tag 'for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubi by Tom Rini · Thu Oct 17 07:26:16 2019 -0400
  77. cab6e75 ubi: Print skip_check in ubi_dump_vol_info() by Stefan Roese · Thu Sep 12 16:41:02 2019 +0200
  78. a88049b ubi: provide a way to skip CRC checks by Quentin Schulz · Thu Sep 12 16:41:01 2019 +0200
  79. 6814897 dm: Tidy up dump output when there are many devices by Patrick Delaunay · Mon Sep 30 10:19:13 2019 +0200
  80. d23bcf1 dm: pinctrl: introduce PINCONF_RECURSIVE option by Patrick Delaunay · Fri Aug 02 14:48:00 2019 +0200
  81. 98381da dm: core: device: switch off power domain after device removal by Anatolij Gustschin · Fri Sep 27 13:48:15 2019 +0530
  82. 589eeb8 power: domain: Introduce dev_power_domain_off by Lokesh Vutla · Fri Sep 27 13:48:14 2019 +0530
  83. 01cfdf7 remoteproc: k3_arm64: Enable DM_FLAG_DEFAULT_PD_CTRL_OFF by Lokesh Vutla · Fri Sep 27 13:48:13 2019 +0530
  84. c10e52b dm: core: Allow for not controlling the power-domain by DM framework by Lokesh Vutla · Fri Sep 27 13:48:12 2019 +0530
  85. 990a4c5 dm: pinctrl: Skip not associated gpio phandle and rise a warning message by Michael Trimarchi · Tue Sep 17 22:06:03 2019 +0200
  86. d220111 core: device: use dev_power_domain_on by Peng Fan · Tue Sep 17 09:29:22 2019 +0000
  87. db513e9 power: domain: add dev_power_domain_on by Peng Fan · Tue Sep 17 09:29:19 2019 +0000
  88. 59c90f3 dm: spi: Do not assume first SPI bus by Thomas Fitzsimmons · Fri Sep 06 07:51:19 2019 -0400
  89. f327ecb dm: device: Request next sequence number by Thomas Fitzsimmons · Fri Sep 06 07:51:18 2019 -0400
  90. 7ef21ad tpm2: Don't assume active low reset value by Kayla Theil · Fri Sep 06 12:40:45 2019 +0200
  91. bcdb104 dm: pinctrl: introduce PINCONF_RECURSIVE option by Patrick Delaunay · Fri Aug 02 14:48:00 2019 +0200
  92. 7d09e5c Merge tag 'u-boot-imx-20191014' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · Mon Oct 14 13:00:51 2019 -0400
  93. 30d6772 Merge tag 'video-for-2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-video by Tom Rini · Mon Oct 14 07:30:16 2019 -0400
  94. f64972a Merge tag 'mmc-10-10-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc by Tom Rini · Mon Oct 14 07:28:32 2019 -0400
  95. f0fb386 i2c: imx_lpi2c: add ipg clk by Peng Fan · Wed Jul 24 08:54:16 2019 +0000
  96. b038fed video: add support of panel RM68200 by Yannick Fertré · Mon Oct 07 15:29:09 2019 +0200
  97. 5b855d4 video: add support of panel OTM8009A by Yannick Fertré · Mon Oct 07 15:29:08 2019 +0200
  98. 1334cf2 video: add support of STM32 MIPI DSI controller driver by Yannick Fertré · Mon Oct 07 15:29:07 2019 +0200
  99. 764af46 video: add MIPI DSI host controller bridge by Yannick Fertré · Mon Oct 07 15:29:06 2019 +0200
  100. 9712c82 dm: Add a dsi host uclass by Yannick Fertré · Mon Oct 07 15:29:05 2019 +0200