Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / b908d2e12de59661cd33f14bdd866924998babe4
  1. b908d2e riscv: Remove unused _relocate arguments by Ivan Gorinov · Thu Jun 28 14:50:17 2018 -0700
  2. 29c23b5 arm: Remove unused _relocate arguments by Ivan Gorinov · Thu Jun 28 14:50:04 2018 -0700
  3. 28bad7d x86: Remove unused _relocate arguments by Ivan Gorinov · Thu Jun 28 14:49:46 2018 -0700
  4. ced66ce arm/arm64: bitops: fix find_next_zero_bit to be compat with arm64 by Grygorii Strashko · Thu Jun 28 14:25:52 2018 -0500
  5. 6be6a2f boards: amlogic: Fix boards README by Neil Armstrong · Wed Jun 27 17:19:02 2018 +0200
  6. 34f89b8 power: regulator: stpmu1: add power off delay by Christophe Kerello · Wed Jun 27 11:59:47 2018 +0200
  7. cf65fa4 phy: Be able to get phy from PHY provider by Patrice Chotard · Wed Jun 27 11:55:42 2018 +0200
  8. 6935108 mmc: stm32_sdmmc2: update pwron management by Patrick Delaunay · Wed Jun 27 10:15:33 2018 +0200
  9. f0370c0 spl: nor: Skip CONFIG_SYS_FDT_BASE if not defined by York Sun · Tue Jun 26 10:10:04 2018 -0700
  10. 7975725 spl: nor: Add FIT support by York Sun · Tue Jun 26 10:10:03 2018 -0700
  11. 7cb61e0 boards: amlogic: Add FriendlyElec NanoPi K2 board support by Thomas McKahan · Mon Jun 25 16:50:17 2018 +0200
  12. d35f892 ARM: dts: sync meson-gxbb-nanopi-k2 from Linux 4.17 by Neil Armstrong · Mon Jun 25 16:50:16 2018 +0200
  13. b2bb9bc env: common: accept flags on reset to default env by Yaniv Levinsky · Sun Jun 24 19:16:57 2018 +0300
  14. 16e3424 cmd: nvedit: set H_INTERACTIVE in do_env_default by Yaniv Levinsky · Sun Jun 24 19:16:56 2018 +0300
  15. 23840d1 cmd: nvedit: propagate envflag to set_default_vars by Yaniv Levinsky · Sun Jun 24 19:16:55 2018 +0300
  16. 72e10ca cmd: nvedit: rename flags in do_env_default by Yaniv Levinsky · Sun Jun 24 19:16:54 2018 +0300
  17. b8acfa9 cmd: fit_image: Add default property for FIT format scripts by Alex Kiernan · Fri Jun 22 14:58:02 2018 +0000
  18. becc3e0 test: Add ut_assertnull macro by Ramon Fried · Thu Jun 21 17:47:16 2018 +0300
  19. 7bda7dd Merge tag 'xilinx-for-v2018.09' of git://git.denx.de/u-boot-microblaze by Tom Rini · Thu Jul 19 11:48:33 2018 -0400
  20. 7d9405a arm: zynq: spl: fix FPGA initialization by Luis Araneda · Thu Jul 19 03:10:18 2018 -0400
  21. 4397602 drivers: fpga: zynqpl: fix compilation with SPL by Luis Araneda · Thu Jul 19 03:10:17 2018 -0400
  22. eece623 spl: fit: display a message when an FPGA image is loaded by Luis Araneda · Thu Jul 19 03:10:16 2018 -0400
  23. 3a02cfb arm64: zynqmp: Setup ENV_SIZE via Kconfig for mini targets by Michal Simek · Wed Jul 18 13:07:59 2018 +0200
  24. 81c7980 arm64: zynqmp: Add QSPI flash mini u-boot configuration by Siva Durga Prasad Paladugu · Wed Jul 18 16:31:38 2018 +0530
  25. 2384da4 arm: zynq: Setup ENV_SIZE via Kconfig by Michal Simek · Wed Jul 18 12:59:14 2018 +0200
  26. c5330b4 env: Added support to save env to spi through Kconfig by Vipul Kumar · Tue Jul 17 19:00:34 2018 +0530
  27. f3e0ed4 arm: zynq: Add parallel NOR flash mini u-boot configuration for zynq by Siva Durga Prasad Paladugu · Mon Jul 16 15:57:02 2018 +0530
  28. cc1ab0f arm: zynq: Add Nand flash mini u-boot configuration for zynq by Siva Durga Prasad Paladugu · Mon Jul 16 15:57:01 2018 +0530
  29. 2f0d5d7 arm: zynq: Dont define SDRAM_BASE and SDRAM_SIZE in .h by Siva Durga Prasad Paladugu · Mon Jul 16 15:57:00 2018 +0530
  30. b3d55ea lib: fdtdec: Rename routine fdtdec_setup_memory_size() by Siva Durga Prasad Paladugu · Mon Jul 16 15:56:11 2018 +0530
  31. 94a1d52 lib: fdtdec: Update ram_base to store ram start adddress by Siva Durga Prasad Paladugu · Mon Jul 16 15:56:10 2018 +0530
  32. a9d9448 microblaze: Remove XILINX_SPI_FLASH_BASEADDR logic by Michal Simek · Tue Jul 17 14:49:33 2018 +0200
  33. ab31961 watchdog: cadence: Do not stop wdt in probe by Michal Simek · Tue Jul 17 13:17:39 2018 +0200
  34. 869ed8c arm64: zynqmp: Added support of mmio read and write commands by Vipul Kumar · Mon Jul 16 18:04:22 2018 +0530
  35. def629c xilinx: Enable led support for some boards by Michal Simek · Mon Jul 16 14:12:43 2018 +0200
  36. 8a68c3a watchdog: cdns: Add comment for expire_now function by Michal Simek · Mon Jul 16 13:34:55 2018 +0200
  37. 43a21f9 microblaze: Do not force saving variables to flash by Michal Simek · Mon Jul 16 13:37:28 2018 +0200
  38. 4e39ea8 microblaze: Convert generic platform to DM gpio by Michal Simek · Fri Jul 13 08:26:28 2018 +0200
  39. ff629fd arm64: xilinx: Setup default number of chipselects for zcu100 by Michal Simek · Thu May 31 09:50:10 2018 +0200
  40. 5ea7ed5 microblaze: Enable watchdog via defconfig by Michal Simek · Mon Jul 16 13:03:21 2018 +0200
  41. 335fb5b watchdog: Convert Xilinx Axi watchdog driver to driver model by Shreenidhi Shedi · Sun Jul 15 02:05:41 2018 +0530
  42. 1f8fcbb microblaze: Support for watchdog_reset in init by Shreenidhi Shedi · Sun Jul 15 02:05:40 2018 +0530
  43. e2500ee microblaze: Delete Xilinx watchdog related macros by Shreenidhi Shedi · Sun Jul 15 02:05:39 2018 +0530
  44. ffced40 microblaze: Cosmetic changes in Microblaze related files by Shreenidhi Shedi · Sun Jul 15 02:34:35 2018 +0530
  45. 95a3f87 arm64: zynqmp: Changed zynqmp command to handle subcommands with U_BOOT_CMD_MKENT by Vipul Kumar · Wed Jul 11 15:18:28 2018 +0530
  46. 6887797 gpio: xilinx: Convert driver to DM by Michal Simek · Thu Jul 12 16:05:46 2018 +0200
  47. d1c6d42 sysreset: Add support for Microblaze soft reset jump by Michal Simek · Fri Jul 13 17:00:13 2018 +0200
  48. 8a196af sysreset: Add support for gpio-restart by Michal Simek · Fri Jul 13 11:04:56 2018 +0200
  49. 41e905b arm: zynq: Try to enable the first watchdog via aliases by Michal Simek · Wed Jul 11 08:35:22 2018 +0200
  50. 169d34b arm64: zynqmp: Try to enable the first watchdog via aliases by Michal Simek · Wed Jul 11 08:30:07 2018 +0200
  51. e440665 gpio: zynq: Setup bank_name to dev->name by Michal Simek · Thu Jun 21 13:58:56 2018 +0200
  52. f54fbc8 microblaze: Do not call timer init that early by Michal Simek · Wed Jul 11 14:08:26 2018 +0200
  53. 625bc08 gpio: zynq: Read of mach data in platdata with dev_get_driver_data by Michal Simek · Thu Jul 12 10:58:04 2018 +0200
  54. 5f7202c gpio: dm: Support manual relocation for gpio by Michal Simek · Thu Jul 12 12:42:27 2018 +0200
  55. 28d3deb sysreset: dm: Support manual relocation for sysreset by Michal Simek · Thu Jul 12 10:36:07 2018 +0200
  56. d05b794 gpio: zynq: Fix typo in one error message by Michal Simek · Thu Jul 12 12:30:34 2018 +0200
  57. 8dd12a8 microblaze: Remove unused XILINX_BOARD_NAME macro by Michal Simek · Thu Jul 12 08:46:11 2018 +0200
  58. fcb64a6 arm64: zynqmp: Sync defconfigs in connection to DEFINE_TCM_OCM_MMAP by Michal Simek · Thu Jul 12 07:50:59 2018 +0200
  59. 7b5eca9 watchdog: dm: Support manual relocation for watchdogs by Michal Simek · Wed Jul 11 15:42:25 2018 +0200
  60. fc61be3 watchdog: dm: Change uclass name to watchdog and enable DM_UC_FLAG_SEQ_ALIAS by Michal Simek · Wed Jul 11 08:24:43 2018 +0200
  61. 971b30a arm64: zcu100: Enable USB host ether and ASIX via defconfig by Michal Simek · Wed Jun 27 15:54:18 2018 +0200
  62. cda7d20 microblaze: Guard do_reset by CONFIG_SYSRESET by Michal Simek · Thu Jun 28 10:30:05 2018 +0200
  63. a5be522 microblaze: Use default implementation from include/linux/io.h by Michal Simek · Thu Jun 28 10:41:56 2018 +0200
  64. e460352 xilinx: zynq: Add support to secure images by Siva Durga Prasad Paladugu · Tue Jun 26 15:02:19 2018 +0530
  65. f104c55 serial: zynq: Use platdata for storing static data instead of priv by Michal Simek · Thu Jun 14 10:32:27 2018 +0200
  66. 2b0634d usb_kdb: Get stdio_dev directly from sdev pointer by Michal Simek · Wed Jun 27 14:35:07 2018 +0200
  67. 07b3cc9 usb_kbd: Add support for watchdog by Michal Simek · Wed Jun 27 14:16:54 2018 +0200
  68. 488f0e7 clk: zynqmp: Fixed the same if/else part error reported by coverity by Vipul Kumar · Wed Jun 27 10:44:45 2018 +0530
  69. b0172c3 arm/arm64: zynq/zynqmp: pass the PS init file as a kconfig variable by Luca Ceresoli · Fri Jun 22 12:40:16 2018 +0200
  70. 73c60d7 hush: Remove default CONFIG_SYS_PROMPT_HUSH_PS2 setting from board files by Michal Simek · Fri Jun 22 08:10:41 2018 +0200
  71. 2e1b90b common: command: Handle USAGE failure separately by Michal Simek · Thu Jun 21 14:49:26 2018 +0200
  72. 44bdb57 common: command: Use command_ret_t enum values instead of values by Michal Simek · Mon Jun 04 13:29:49 2018 +0200
  73. c11fba3 arm64: zynqmp: Enable usb mass storage command and functionality by Michal Simek · Thu Jun 21 14:40:09 2018 +0200
  74. 5f49251 gpio: zynq: Use live-tree function by Michal Simek · Thu Jun 21 09:21:35 2018 +0200
  75. 6b629d8 Merge branch 'master' of git://git.denx.de/u-boot-sunxi by Tom Rini · Tue Jul 17 14:28:47 2018 -0400
  76. 386d243 sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards by Chen-Yu Tsai · Sat Jul 14 21:55:45 2018 +0800
  77. 594aeb6 Merge branch 'master' of git://git.denx.de/u-boot-spi by Tom Rini · Mon Jul 16 09:13:45 2018 -0400
  78. ea15d06 sf: add paired dev info for winbond w25q16jv by Ludwig Zenz · Thu Jul 05 09:27:47 2018 +0200
  79. af45f63 sf: add Macronix mx25l1633e entry by Ludwig Zenz · Thu Jul 05 09:27:46 2018 +0200
  80. 4dc1de3 sf: add Gigadevice gd25q16c entry by Ludwig Zenz · Thu Jul 05 09:27:45 2018 +0200
  81. 4ff88da spi_flash: add a bunch of winbond flashes to id-table by Hannes Schmelzer · Tue Jun 26 23:14:07 2018 +0200
  82. 027989a zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boards by Siva Durga Prasad Paladugu · Wed Jul 04 17:31:24 2018 +0530
  83. 7659738 spi: zynqmp_gqspi: Add support for ZynqMP qspi driver by Siva Durga Prasad Paladugu · Wed Jul 04 17:31:23 2018 +0530
  84. 646b460 spi: xilinx_spi: convert to livetree by Vipul Kumar · Sat Jun 30 08:15:20 2018 +0530
  85. c7e2aae spi: xilinx_spi: Added support to read JEDEC-id twice at the boot time by Vipul Kumar · Sat Jun 30 08:15:19 2018 +0530
  86. 90098ba spi: xilinx_spi: Modify transfer logic xilinx_spi_xfer() function by Vipul Kumar · Sat Jun 30 08:15:18 2018 +0530
  87. 1ba1386 spi: xilinx: Read reg base address from DTS file by Michal Simek · Sat Jun 30 08:15:17 2018 +0530
  88. 575dc3c configs: Bananapi_M2_Ultra: enable gigabit ethernet by Lothar Felten · Fri Jul 13 10:45:30 2018 +0200
  89. 42abac6 sunxi: R40: add gigabit ethernet devicetree node by Lothar Felten · Fri Jul 13 10:45:29 2018 +0200
  90. e8cbced net: sun8i-emac: support R40 GMAC by Lothar Felten · Fri Jul 13 10:45:28 2018 +0200
  91. acb9a5b net: sun8i-emac: set mux and clock by driver data by Lothar Felten · Fri Jul 13 10:45:27 2018 +0200
  92. 5be7594 net: sun8i-emac: fix printing NULL character by Lothar Felten · Fri Jul 13 10:45:26 2018 +0200
  93. 30213a2 sunxi: R40: add gigabit ethernet clocks by Lothar Felten · Fri Jul 13 10:45:25 2018 +0200
  94. 1a6575b dm: sunxi: Use DM for MMC and SATA on all A10 boards by Adam Sampson · Sat Jun 30 01:02:29 2018 +0100
  95. 8347015 dm: mmc: sunxi: Add A10/A20 compatible strings by Adam Sampson · Sat Jun 30 01:02:28 2018 +0100
  96. 35196f1 sunxi: DT: A64: add proper SoPine baseboard device tree by Andre Przywara · Wed Jul 04 14:16:39 2018 +0100
  97. 436337a sunxi: DT: H3: update board .dts files from Linux by Andre Przywara · Wed Jul 04 14:16:38 2018 +0100
  98. e237db6 sunxi: DT: H5: update board .dts files from Linux by Andre Przywara · Wed Jul 04 14:16:37 2018 +0100
  99. 273e641 sunxi: DT: update device tree files for Allwinner H3 and H5 SoCs by Andre Przywara · Wed Jul 04 14:16:36 2018 +0100
  100. 0fcb830 sunxi: DT: A64: update board .dts files from Linux by Andre Przywara · Wed Jul 04 14:16:35 2018 +0100