1. 3b551bc arm: socfpga: imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION by Simon Goldschmidt · Tue Oct 30 20:21:49 2018 +0100
  2. ad4105f arm: socfpga: Fix bootcounter located at the end of internal SRAM by Stefan Roese · Tue Oct 30 10:00:22 2018 +0100
  3. 4003448 arm: socfpga: fpga: fix type of local variable by Simon Goldschmidt · Mon Oct 15 20:35:10 2018 +0200
  4. 77a36e9 Prepare v2018.11-rc3 by Tom Rini · Mon Oct 29 16:04:26 2018 -0400
  5. b49f19e Merge branch 'master' of git://git.denx.de/u-boot-sunxi by Tom Rini · Mon Oct 29 11:21:00 2018 -0400
  6. 08ee1ba sunxi: store DRAM size in SPL header by Andre Przywara · Thu Oct 25 17:23:07 2018 +0800
  7. 14170a4 sunxi: add Kconfig option for the maximum accessible DRAM by Icenowy Zheng · Thu Oct 25 17:23:06 2018 +0800
  8. 9bc6bec sunxi: map DRAM part with 3G size by Icenowy Zheng · Thu Oct 25 17:23:05 2018 +0800
  9. 14a2539 sunxi: board.c: refactor SPL header checks by Andre Przywara · Thu Oct 25 17:23:04 2018 +0800
  10. edddccb sunxi: Extend SPL header versioning by Andre Przywara · Thu Oct 25 17:23:03 2018 +0800
  11. 2a269d3 sunxi: disable Pine A64 model detection code on other boards by Icenowy Zheng · Thu Oct 25 17:23:02 2018 +0800
  12. 2d98c75 Merge git://git.denx.de/u-boot-x86 by Tom Rini · Sun Oct 28 09:28:26 2018 -0400
  13. d6e53c7 drivers: cosmetic: Convert SPDX license tags to Linux Kernel style by Patrick Delaunay · Fri Oct 26 09:02:52 2018 +0200
  14. 253a24a x86: Fix car_uninit weak symbol definition by Bin Meng · Thu Oct 25 03:05:37 2018 -0700
  15. 4db1b93 x86: theadorable-x86-xxx_defconfig: Move VGA BIOS to make room for U-Boot by Stefan Roese · Mon Oct 22 14:07:56 2018 +0200
  16. fd58a66 x86: theadorable-x86: Generate and pass root=PARTUUID instead of /dev/sdaX by Stefan Roese · Mon Oct 22 14:07:55 2018 +0200
  17. 104e111 x86: theadorable-x86-common: Change pci hotplug cmdline parameters (again) by Stefan Roese · Mon Oct 22 14:07:54 2018 +0200
  18. 9c9d0e9 x86: BayTrail: southcluster.asl: Change PCI 64 bit address range / region by Stefan Roese · Mon Oct 22 14:07:53 2018 +0200
  19. ec3f662 vf610twr: Enable thumb2 for builds by Tom Rini · Fri Oct 26 08:40:53 2018 -0400
  20. 310cc0d Merge branch 'master' of git://git.denx.de/u-boot-net by Tom Rini · Thu Oct 25 20:30:05 2018 -0400
  21. 5db0e14 Merge tag 'u-boot-imx-20181025' of git://git.denx.de/u-boot-imx by Tom Rini · Thu Oct 25 10:16:21 2018 -0400
  22. bd260f0 arm: dts: imx8qxp: fix build warining by Peng Fan · Thu Oct 25 08:36:49 2018 +0000
  23. 844b9f3 imx: mkimage: avoid stop CI when required files not exists by Peng Fan · Thu Oct 25 08:32:40 2018 +0000
  24. b71fc5e net: fec_mxc: add support for i.MX8X by Anatolij Gustschin · Thu Oct 18 16:15:11 2018 +0200
  25. 67674e4 net: mvpp2: increase PHY reset pulse by Baruch Siach · Mon Oct 15 13:16:48 2018 +0300
  26. 187dced net: mvpp2: fix polarity of PHY reset signal by Baruch Siach · Mon Oct 15 13:16:47 2018 +0300
  27. 46fa2bd net/phy: Add phy-id for IN112525_S03 by Priyanka Jain · Thu Oct 11 04:47:05 2018 +0000
  28. f08eb3d net: dm: fec: Obtain the transceiver type from the DT by Martin Fuzzey · Thu Oct 04 19:59:21 2018 +0200
  29. 9a6a2c9 net: dm: fec: Support the phy-supply binding by Martin Fuzzey · Thu Oct 04 19:59:20 2018 +0200
  30. 185e3b8 net: dm: fec: Fix phy-reset-duration clamping and defaults by Martin Fuzzey · Thu Oct 04 19:59:19 2018 +0200
  31. 9c3f97a net: dm: fec: Fix time unit error in phy-reset-duration by Martin Fuzzey · Thu Oct 04 19:59:18 2018 +0200
  32. 6ce0dd8 net: phy: aquantia: autodetect if firmware needs to be loaded by Jeremy Gebben · Tue Sep 18 15:49:37 2018 -0600
  33. e662c0d net: phy: aquantia: add firmware loading support by Jeremy Gebben · Tue Sep 18 15:49:36 2018 -0600
  34. abe3edf configs: migrate CONFIG_PHY_AQUANTIA to Kconfig by Jeremy Gebben · Tue Sep 18 15:49:35 2018 -0600
  35. 7c18fe8 miiphy: Add function to retrieve MDIO bus list head by Pankaj Bansal · Tue Sep 18 15:46:48 2018 +0530
  36. 4c2c464 cmd: mii: don't check address for 'device' subcommand by Hector Palacios · Fri Aug 17 13:06:40 2018 +0200
  37. 82482d6 sunxi: display: Mark sunxi_rgb2yuv_coef array as const by Priit Laes · Tue Oct 23 20:20:31 2018 +0300
  38. 9aa5009 sunxi: docs: Mention CONFIG_NAND requirement by Priit Laes · Tue Oct 23 20:20:30 2018 +0300
  39. cb9325d sunxi: Fix typos of spelling Allwinner by Priit Laes · Tue Oct 23 20:20:28 2018 +0300
  40. 50f3feb pwm: sunxi: choose best prescaler to improve PWM resolution by Vasily Khoruzhick · Tue Oct 16 21:56:35 2018 -0700
  41. f83a857 pwm: sunxi: use new prescaler when configuring PWM by Vasily Khoruzhick · Tue Oct 16 21:56:34 2018 -0700
  42. db3fb0c pwm: sunxi: fix off-by-one that prevented PWM to use prescaler bypass by Vasily Khoruzhick · Tue Oct 16 21:56:33 2018 -0700
  43. ab25a0d warp7: MAINTAINERS: Add an entry for warp7_bl33_defconfig by Fabio Estevam · Tue Oct 23 12:38:18 2018 -0300
  44. 5dbcdb2 Merge branch 'master' of git://git.denx.de/u-boot-samsung by Tom Rini · Tue Oct 23 21:13:32 2018 -0400
  45. 59ff66c travis: Rework Freescale ARM jobs a bit by Tom Rini · Tue Oct 23 11:58:44 2018 -0400
  46. 738805d ARM: Samsung: Add Exynos5422-based Odroid HC2 support by Dirk Meul · Sun Oct 14 17:14:17 2018 +0200
  47. 41902e4 binman: Add a test for Intel reference code by Simon Glass · Mon Oct 01 12:22:31 2018 -0600
  48. eabfa91 Merge git://git.denx.de/u-boot-x86 by Tom Rini · Mon Oct 22 13:56:10 2018 -0400
  49. 822cab3 serial: mxc: Add match string for i.mx6 quad/dual lite serial by Bernhard Messerklinger · Mon Sep 03 10:17:35 2018 +0200
  50. 0b8a2e3 arm: ti: boot: Remove environment partition by Sam Protsenko · Thu Oct 18 22:47:17 2018 +0300
  51. cb466db watchdog: aspeed: restore default value of reset_mask by Cédric Le Goater · Tue Oct 16 13:57:11 2018 +0200
  52. 726ab5d ARM: omap3_logic: Add NOR Flash Support for SOM-LV by Adam Ford · Sun Oct 14 15:53:17 2018 -0500
  53. ed8efed arm: udoo: Convert to distro config by Meul, Dirk · Sat Oct 13 12:54:01 2018 +0000
  54. b210fc7 test: overlay: add missing include by Heinrich Schuchardt · Thu Oct 11 02:16:46 2018 +0200
  55. 455ef43 nand: atmel: Initialize pmecc smu with correct size by Bin Meng · Mon Oct 08 02:27:44 2018 -0700
  56. 1524c30 configs: sama5d2_ptc_ek: add default bootargs for MMC defconfig by Eugen Hristev · Mon Oct 08 10:37:00 2018 +0300
  57. 8dd60e9 configs: sama5d2_ptc_ek: add default bootargs for NAND defconfig by Eugen Hristev · Mon Oct 08 10:36:59 2018 +0300
  58. 265b8f7 configs: sama5d2_xplained: enable w1 and overlay for emmc defconfig by Eugen Hristev · Mon Oct 08 10:20:04 2018 +0300
  59. fb9f30e configs: sama5d27_som1_ek: enable w1 and overlay for mmc1 defconfig by Eugen Hristev · Mon Oct 08 10:12:56 2018 +0300
  60. 933207b configs: at91: sama5: enable CMD_IMI by Eugen Hristev · Mon Oct 08 10:03:01 2018 +0300
  61. 3c4c7eb configs: at91: sam9x5: added FIT and iminfo support by Eugen Hristev · Mon Oct 08 09:55:19 2018 +0300
  62. 3232f9b board: at91sam9x5: add environment var for cpu type by Eugen Hristev · Mon Oct 08 09:54:27 2018 +0300
  63. c54e087 ARM: omap3logic: Fix MMC name by Adam Ford · Sun Oct 07 17:47:50 2018 -0500
  64. 29e6e45 ARM: omap3logic: Specify DM serial driver as omap_serial by Adam Ford · Sun Oct 07 17:42:42 2018 -0500
  65. 0845f1d ARM: omap3logic: Encapsulate the MUSB functions in check for DM by Adam Ford · Sun Oct 07 17:39:29 2018 -0500
  66. c369692 ARM: omap3_logic.c: Optimize DDR timings based on OMAP35 or 36/37 by Adam Ford · Sun Oct 07 09:20:45 2018 -0500
  67. 3c7111f ARM: da850evm_direct_nor: Remove DM_I2C_COMPAT by Adam Ford · Sun Oct 07 08:39:21 2018 -0500
  68. 7400b92 warp7: configs: add bl33 defconfig by Rui Miguel Silva · Wed Sep 05 11:56:08 2018 +0100
  69. 5c1dab0 warp7: include: configs: set skip low level init by Rui Miguel Silva · Wed Sep 05 11:56:07 2018 +0100
  70. 0fec77d optee: adjust dependencies and default values for dram by Rui Miguel Silva · Wed Sep 05 11:56:06 2018 +0100
  71. d1bb7a0 imx: mx7: avoid some initialization if low level is skipped by Rui Miguel Silva · Wed Sep 05 11:56:05 2018 +0100
  72. 422f8a8 i2c: imx_lpi2c: fix typo and register base address format by Anatolij Gustschin · Thu Oct 18 16:36:01 2018 +0200
  73. 4161dc2 Kconfig: Convert CONFIG_IMX_WATCHDOG to Kconfig by Xiaoliang Yang · Thu Oct 18 17:14:19 2018 +0800
  74. 42e8d8f board: ge: bx50v3: fix initialization of i2c bus0 by Dan Cimpoca · Mon Oct 15 12:09:56 2018 +0200
  75. 476e4e6 board: ge: bx50v3: b{4,6}50v3 modeline by Ian Ray · Mon Oct 15 09:59:45 2018 +0200
  76. 28540c5 board: ge: bx50v3: correct LDB clock by Ian Ray · Mon Oct 15 09:59:44 2018 +0200
  77. 5494ab2 board: ge: bx50v3: Change maintainer by Fabien Lahoudere · Mon Oct 15 09:29:27 2018 +0200
  78. 8e8b847 doc: imx: Improve i.MX documentation naming by Breno Matheus Lima · Wed Oct 10 01:10:51 2018 +0000
  79. 4f01a2c doc: imx: misc: Reorganize miscellaneous documentation by Breno Matheus Lima · Wed Oct 10 01:10:48 2018 +0000
  80. aa99066 doc: imx: hab: Reorganize High Assurance Boot documentation by Breno Matheus Lima · Wed Oct 10 01:10:44 2018 +0000
  81. 54b2652 doc: imx: Reorganize i.MX SoC common documentation by Breno Matheus Lima · Wed Oct 10 01:10:40 2018 +0000
  82. 4d71943 doc: imx: mkimage: reorganize i.MX mkimage documentation by Breno Matheus Lima · Wed Oct 10 01:10:35 2018 +0000
  83. f013f17 doc: imx: Move SPD related info to the appropriate doc by Breno Matheus Lima · Wed Oct 10 01:10:31 2018 +0000
  84. 8832026 doc: imx: reorganize i.MX documentation by Breno Matheus Lima · Wed Oct 10 01:10:27 2018 +0000
  85. 79b393d imx: imx8qxp_mek: update to build image in U-Boot by Peng Fan · Tue Oct 16 04:50:39 2018 +0000
  86. 3cb662a arm: imx: include imx8image support by Peng Fan · Tue Oct 16 04:50:35 2018 +0000
  87. 60a5607 tools: add i.MX8/8X image support by Peng Fan · Tue Oct 16 04:50:30 2018 +0000
  88. 702c6dc imx: add i.MX8QXP MEK board support by Peng Fan · Thu Oct 18 14:28:37 2018 +0200
  89. 62f929f arm: dts: introduce dtsi for i.MX8QXP by Peng Fan · Thu Oct 18 14:28:36 2018 +0200
  90. 4c286b7 mmc: fsl_esdhc: add uclass clk support by Peng Fan · Thu Oct 18 14:28:35 2018 +0200
  91. ef6e9ca fsl_esdhc: Update usdhc driver to support i.MX8 by Ye Li · Thu Oct 18 14:28:34 2018 +0200
  92. 68e4563 serial: lpuart: support uclass clk api by Peng Fan · Fri Oct 19 00:26:23 2018 +0200
  93. a2aedcb serial: lpuart: Enable RX and TX FIFO by Ye Li · Thu Oct 18 14:28:32 2018 +0200
  94. b7f9ea9 serial_lpuart: Update lpuart driver to support i.MX8 by Peng Fan · Thu Oct 18 14:28:31 2018 +0200
  95. 5e80d5a clk: imx: add clk driver for i.MX8QXP by Peng Fan · Thu Oct 18 14:28:30 2018 +0200
  96. bc6244b power: Add power domain driver for i.MX8 by Peng Fan · Thu Oct 18 14:28:29 2018 +0200
  97. e84d11f pinctrl: Add pinctrl driver for i.MX8 by Peng Fan · Thu Oct 18 14:28:28 2018 +0200
  98. b2242e1 gpio: mxc_gpio: add support for i.MX8 by Peng Fan · Thu Oct 18 14:28:27 2018 +0200
  99. e4cf8d7 imx8: add dummy clock by Peng Fan · Thu Oct 18 14:28:26 2018 +0200
  100. f4f876c imx8: add iomux configuration api by Peng Fan · Thu Oct 18 14:28:25 2018 +0200