| David Purdy | 415d07e | 2012-03-27 16:01:09 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 |
| 3 | * David Purdy <david.c.purdy@gmail.com> |
| 4 | * |
| 5 | * Based on Kirkwood support: |
| 6 | * (C) Copyright 2009 |
| 7 | * Marvell Semiconductor <www.marvell.com> |
| 8 | * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| 9 | * |
| Wolfgang Denk | d79de1d | 2013-07-08 09:37:19 +0200 | [diff] [blame] | 10 | * SPDX-License-Identifier: GPL-2.0+ |
| David Purdy | 415d07e | 2012-03-27 16:01:09 +0000 | [diff] [blame] | 11 | */ |
| 12 | |
| 13 | #ifndef _CONFIG_POGO_E02_H |
| 14 | #define _CONFIG_POGO_E02_H |
| 15 | |
| 16 | /* |
| 17 | * Machine type definition and ID |
| 18 | */ |
| 19 | #define MACH_TYPE_POGO_E02 3542 |
| 20 | #define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02 |
| 21 | #define CONFIG_IDENT_STRING "\nPogo E02" |
| 22 | |
| 23 | /* |
| 24 | * High Level Configuration Options (easy to change) |
| 25 | */ |
| 26 | #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ |
| 27 | #define CONFIG_KIRKWOOD /* SOC Family Name */ |
| 28 | #define CONFIG_KW88F6281 /* SOC Name */ |
| 29 | #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
| 30 | |
| 31 | /* |
| 32 | * Commands configuration |
| 33 | */ |
| 34 | #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ |
| 35 | #define CONFIG_SYS_MVFS |
| 36 | #include <config_cmd_default.h> |
| 37 | #define CONFIG_CMD_DHCP |
| 38 | #define CONFIG_CMD_ENV |
| 39 | #define CONFIG_CMD_MII |
| 40 | #define CONFIG_CMD_NAND |
| 41 | #define CONFIG_CMD_PING |
| 42 | #define CONFIG_CMD_USB |
| 43 | |
| 44 | /* |
| 45 | * mv-common.h should be defined after CMD configs since it used them |
| 46 | * to enable certain macros |
| 47 | */ |
| 48 | #include "mv-common.h" |
| 49 | |
| 50 | /* Remove or override few declarations from mv-common.h */ |
| 51 | #undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ |
| 52 | #define CONFIG_SYS_PROMPT "PogoE02> " |
| 53 | |
| 54 | /* |
| 55 | * Environment variables configurations |
| 56 | */ |
| 57 | #ifdef CONFIG_CMD_NAND |
| 58 | #define CONFIG_ENV_IS_IN_NAND |
| 59 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ |
| 60 | #else |
| 61 | #define CONFIG_ENV_IS_NOWHERE |
| 62 | #endif |
| 63 | |
| 64 | #define CONFIG_ENV_SIZE 0x20000 /* 128k */ |
| 65 | #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ |
| 66 | |
| 67 | /* |
| 68 | * Default environment variables |
| 69 | */ |
| 70 | #define CONFIG_BOOTCOMMAND \ |
| 71 | "setenv bootargs $(bootargs_console); " \ |
| 72 | "run bootcmd_usb; " \ |
| 73 | "bootm 0x00800000 0x01100000" |
| 74 | |
| 75 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 76 | "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ |
| 77 | "32M(rootfs),-(data)\0"\ |
| 78 | "mtdids=nand0=orion_nand\0"\ |
| 79 | "bootargs_console=console=ttyS0,115200\0" \ |
| 80 | "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \ |
| 81 | "ext2load usb 0:1 0x01100000 /uInitrd\0" |
| 82 | |
| 83 | /* |
| 84 | * Ethernet Driver configuration |
| 85 | */ |
| 86 | #ifdef CONFIG_CMD_NET |
| 87 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ |
| 88 | #define CONFIG_PHY_BASE_ADR 0 |
| 89 | #endif /* CONFIG_CMD_NET */ |
| 90 | |
| 91 | /* |
| 92 | * File system |
| 93 | */ |
| 94 | #define CONFIG_CMD_EXT2 |
| 95 | #define CONFIG_CMD_FAT |
| 96 | #define CONFIG_CMD_JFFS2 |
| 97 | #define CONFIG_CMD_UBI |
| 98 | #define CONFIG_CMD_UBIFS |
| 99 | #define CONFIG_RBTREE |
| 100 | #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ |
| 101 | #define CONFIG_MTD_PARTITIONS |
| 102 | #define CONFIG_CMD_MTDPARTS |
| 103 | #define CONFIG_LZO |
| 104 | |
| 105 | #endif /* _CONFIG_POGO_E02_H */ |