blob: 22bb008745e1f616fa9cbbd16684bcf95714d816 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Simon Guinot16311a22011-06-17 19:41:33 +05302/*
3 * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
4 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
Simon Guinot16311a22011-06-17 19:41:33 +05309 */
10
11#include <common.h>
Simon Guinot16311a22011-06-17 19:41:33 +053012#include <command.h>
Simon Glass5e6201b2019-08-01 09:46:51 -060013#include <env.h>
Simon Glass97589732020-05-10 11:40:02 -060014#include <init.h>
Simon Glass0c364412019-12-28 10:44:48 -070015#include <net.h>
Simon Glass3ba929a2020-10-30 21:38:53 -060016#include <asm/global_data.h>
Simon Glass0ffb9d62017-05-31 19:47:48 -060017#include <asm/mach-types.h>
Anatolij Gustschin5cf80f12011-10-29 11:31:19 +000018#include <asm/arch/cpu.h>
Stefan Roesec2437842014-10-22 12:13:06 +020019#include <asm/arch/soc.h>
Simon Guinot16311a22011-06-17 19:41:33 +053020#include <asm/arch/mpp.h>
21#include <asm/arch/gpio.h>
Simon Guinota35cb4c2011-11-21 19:25:47 +053022
Simon Guinot16311a22011-06-17 19:41:33 +053023#include "netspace_v2.h"
Simon Guinota35cb4c2011-11-21 19:25:47 +053024#include "../common/common.h"
Simon Guinot16311a22011-06-17 19:41:33 +053025
26DECLARE_GLOBAL_DATA_PTR;
27
28int board_early_init_f(void)
29{
30 /* Gpio configuration */
Stefan Roesec50ab392014-10-22 12:13:11 +020031 mvebu_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
32 NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
Simon Guinot16311a22011-06-17 19:41:33 +053033
34 /* Multi-Purpose Pins Functionality configuration */
Albert ARIBAUD4d424312012-11-26 11:27:36 +000035 static const u32 kwmpp_config[] = {
Simon Guinot16311a22011-06-17 19:41:33 +053036 MPP0_SPI_SCn,
37 MPP1_SPI_MOSI,
38 MPP2_SPI_SCK,
39 MPP3_SPI_MISO,
40 MPP4_NF_IO6,
41 MPP5_NF_IO7,
42 MPP6_SYSRST_OUTn,
43 MPP7_GPO, /* Fan speed (bit 1) */
44 MPP8_TW_SDA,
45 MPP9_TW_SCK,
46 MPP10_UART0_TXD,
47 MPP11_UART0_RXD,
48 MPP12_GPO, /* Red led */
49 MPP14_GPIO, /* USB fuse */
50 MPP16_GPIO, /* SATA 0 power */
51 MPP17_GPIO, /* SATA 1 power */
52 MPP18_NF_IO0,
53 MPP19_NF_IO1,
54 MPP20_SATA1_ACTn,
55 MPP21_SATA0_ACTn,
56 MPP22_GPIO, /* Fan speed (bit 0) */
57 MPP23_GPIO, /* Fan power */
58 MPP24_GPIO, /* USB mode select */
59 MPP25_GPIO, /* Fan rotation fail */
60 MPP26_GPIO, /* USB vbus-in detection */
61 MPP28_GPIO, /* USB enable vbus-out */
62 MPP29_GPIO, /* Blue led (slow register) */
63 MPP30_GPIO, /* Blue led (command register) */
64 MPP31_GPIO, /* Board power off */
65 MPP32_GPIO, /* Button (0 = Released, 1 = Pushed) */
66 MPP33_GPIO, /* Fan speed (bit 2) */
67 0
68 };
Valentin Longchamp7d0d5022012-06-01 01:31:00 +000069 kirkwood_mpp_conf(kwmpp_config, NULL);
Simon Guinot16311a22011-06-17 19:41:33 +053070
71 return 0;
72}
73
74int board_init(void)
75{
Tom Rinieb6aadc2021-08-30 09:16:32 -040076#ifdef CONFIG_MACH_TYPE
Simon Guinot16311a22011-06-17 19:41:33 +053077 /* Machine number */
78 gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
Tom Rinieb6aadc2021-08-30 09:16:32 -040079#endif
Simon Guinot16311a22011-06-17 19:41:33 +053080
81 /* Boot parameters address */
Stefan Roese0b741752014-10-22 12:13:13 +020082 gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
Simon Guinot16311a22011-06-17 19:41:33 +053083
84 return 0;
85}
86
Simon Guinota35cb4c2011-11-21 19:25:47 +053087#if defined(CONFIG_MISC_INIT_R)
Simon Guinot6e238912011-11-08 11:31:14 +000088int misc_init_r(void)
89{
90#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
Simon Glass64b723f2017-08-03 12:22:12 -060091 if (!env_get("ethaddr")) {
Simon Guinot6e238912011-11-08 11:31:14 +000092 uchar mac[6];
Simon Guinota35cb4c2011-11-21 19:25:47 +053093 if (lacie_read_mac_address(mac) == 0)
Simon Glass8551d552017-08-03 12:22:11 -060094 eth_env_set_enetaddr("ethaddr", mac);
Simon Guinot6e238912011-11-08 11:31:14 +000095 }
Simon Guinota35cb4c2011-11-21 19:25:47 +053096#endif
Simon Guinot6e238912011-11-08 11:31:14 +000097 return 0;
98}
Simon Guinota35cb4c2011-11-21 19:25:47 +053099#endif
Simon Guinot16311a22011-06-17 19:41:33 +0530100
Simon Guinota35cb4c2011-11-21 19:25:47 +0530101#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
Simon Guinot16311a22011-06-17 19:41:33 +0530102/* Configure and initialize PHY */
103void reset_phy(void)
104{
Simon Guinot13c5ae62012-09-06 10:51:42 +0000105#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
Simon Guinotab07aa22020-06-28 19:00:31 +0200106 mv_phy_88e1318_init("ethernet-controller@72000", 0);
Simon Guinot13c5ae62012-09-06 10:51:42 +0000107#else
Simon Guinotab07aa22020-06-28 19:00:31 +0200108 mv_phy_88e1116_init("ethernet-controller@72000", 8);
Simon Guinot13c5ae62012-09-06 10:51:42 +0000109#endif
Simon Guinot16311a22011-06-17 19:41:33 +0530110}
Simon Guinota35cb4c2011-11-21 19:25:47 +0530111#endif
Simon Guinot16311a22011-06-17 19:41:33 +0530112
Simon Guinota35cb4c2011-11-21 19:25:47 +0530113#if defined(CONFIG_KIRKWOOD_GPIO)
Simon Guinot16311a22011-06-17 19:41:33 +0530114/* Return GPIO button status */
115static int
Simon Glassed38aef2020-05-10 11:40:03 -0600116do_read_button(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
Simon Guinot16311a22011-06-17 19:41:33 +0530117{
118 return kw_gpio_get_value(NETSPACE_V2_GPIO_BUTTON);
119}
120
121U_BOOT_CMD(button, 1, 1, do_read_button,
122 "Return GPIO button status 0=off 1=on", "");
Simon Guinota35cb4c2011-11-21 19:25:47 +0530123#endif