blob: 136db0dd260b5408fa8c077a0a26c136b329b269 [file] [log] [blame]
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +01001/*
2 * (C) Copyright 2003-2007
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
Wolfgang Grandegger870ee402012-09-29 09:27:00 +00005 * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +01006 *
Wolfgang Denkbd8ec7e2013-10-07 13:07:26 +02007 * SPDX-License-Identifier: GPL-2.0+
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +01008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010013/*
14 * High Level Configuration Options
15 */
16
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010017/* CPU and board */
Masahiro Yamada608ed2c2014-01-16 11:03:07 +090018#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010019#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */
20
Becky Bruce03ea1be2008-05-08 19:02:12 -050021#define CONFIG_HIGH_BATS 1 /* High BATs supported */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010022
Wolfgang Denk291ba1b2010-10-06 09:05:45 +020023#define CONFIG_SYS_TEXT_BASE 0xfff00000
24
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010025/*
Jon Loeliger5c4ddae2007-07-10 10:12:10 -050026 * BOOTP options
27 */
28#define CONFIG_BOOTP_BOOTFILESIZE
29#define CONFIG_BOOTP_BOOTPATH
30#define CONFIG_BOOTP_GATEWAY
31#define CONFIG_BOOTP_HOSTNAME
32
Jon Loeliger5c4ddae2007-07-10 10:12:10 -050033/*
Jon Loeliger316d2342007-07-04 22:33:01 -050034 * Command line configuration.
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010035 */
Wolfgang Denk765be5c2010-10-20 08:31:45 +020036#define CONFIG_CMD_DTT
37#define CONFIG_CMD_EEPROM
Wolfgang Denk765be5c2010-10-20 08:31:45 +020038#define CONFIG_CMD_IDE
39#define CONFIG_CMD_IMMAP
40#define CONFIG_CMD_JFFS2
Wolfgang Denk765be5c2010-10-20 08:31:45 +020041#define CONFIG_CMD_REGINFO
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010042
43/*
44 * Serial console configuration
45 */
46#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
47#define CONFIG_NETCONSOLE 1 /* network console */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +020048#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010049
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010050/*
51 * Ethernet configuration
52 */
53#define CONFIG_MPC5xxx_FEC 1
Ben Warrenbc1b9172009-02-05 23:58:25 -080054#define CONFIG_MPC5xxx_FEC_MII100
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010055#define CONFIG_PHY_ADDR 0x2
56#define CONFIG_PHY_TYPE 0x79c874
Bartlomiej Sieka26b4c4f2007-05-27 16:58:45 +020057#define CONFIG_RESET_PHY_R 1
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010058
59/*
60 * Autobooting
61 */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010062#undef CONFIG_BOOTARGS
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010063
Wolfgang Denk765be5c2010-10-20 08:31:45 +020064#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Wolfgang Denk765be5c2010-10-20 08:31:45 +020065
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010066/*
67 * Default environment settings
68 */
69#define CONFIG_EXTRA_ENV_SETTINGS \
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010070 "netdev=eth0\0" \
71 "hostname=motionpro\0" \
Wolfgang Grandegger870ee402012-09-29 09:27:00 +000072 "netmask=255.255.255.0\0" \
73 "ipaddr=192.168.1.106\0" \
74 "serverip=192.168.1.100\0" \
75 "gatewayip=192.168.1.100\0" \
Bartlomiej Sieka8daee212007-05-08 09:21:57 +020076 "console=ttyPSC0,115200\0" \
Wolfgang Denk765be5c2010-10-20 08:31:45 +020077 "u-boot_addr=400000\0" \
78 "kernel_addr=400000\0" \
79 "fdt_addr=700000\0" \
80 "ramdisk_addr=800000\0" \
Bartlomiej Siekad14c4142007-05-08 10:23:56 +020081 "multi_image_addr=800000\0" \
Wolfgang Grandegger870ee402012-09-29 09:27:00 +000082 "rootpath=/opt/eldk-4.2/ppc_6xx\0" \
83 "u-boot=/tftpboot/motionpro/u-boot.bin\0" \
84 "bootfile=/tftpboot/motionpro/uImage\0" \
85 "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
86 "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
Bartlomiej Siekad14c4142007-05-08 10:23:56 +020087 "multi_image_file=kernel+initrd+dtb.img\0" \
Bartlomiej Sieka082da162007-05-27 17:26:46 +020088 "load=tftp ${u-boot_addr} ${u-boot}\0" \
Wolfgang Denk765be5c2010-10-20 08:31:45 +020089 "update=prot off fff00000 +${filesize};" \
90 "era fff00000 +${filesize}; " \
Bartlomiej Sieka082da162007-05-27 17:26:46 +020091 "cp.b ${u-boot_addr} fff00000 ${filesize};" \
Wolfgang Denk765be5c2010-10-20 08:31:45 +020092 "prot on fff00000 +${filesize}\0" \
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010093 "ramargs=setenv bootargs root=/dev/ram rw\0" \
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +010094 "nfsargs=setenv bootargs root=/dev/nfs rw " \
Bartlomiej Sieka082da162007-05-27 17:26:46 +020095 "nfsroot=${serverip}:${rootpath}\0" \
Wolfgang Grandegger870ee402012-09-29 09:27:00 +000096 "fat_args=setenv bootargs root=/dev/sda rw\0" \
97 "mtdids=nor0=ff000000.flash\0" \
98 "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," \
99 "128k(env),128k(redund_env)," \
100 "128k(dtb),128k(user_data)\0" \
101 "addcons=setenv bootargs ${bootargs} console=${console}\0" \
102 "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
Bartlomiej Sieka082da162007-05-27 17:26:46 +0200103 "addip=setenv bootargs ${bootargs} " \
104 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
105 "${netmask}:${hostname}:${netdev}:off panic=1 " \
106 "console=${console}\0" \
107 "net_nfs=tftp ${kernel_addr} ${bootfile}; " \
Wolfgang Grandegger870ee402012-09-29 09:27:00 +0000108 "tftp ${fdt_addr} ${fdt_file}; " \
109 "run nfsargs addip addmtd; " \
Bartlomiej Sieka082da162007-05-27 17:26:46 +0200110 "bootm ${kernel_addr} - ${fdt_addr}\0" \
111 "net_self=tftp ${kernel_addr} ${bootfile}; " \
112 "tftp ${fdt_addr} ${fdt_file}; " \
113 "tftp ${ramdisk_addr} ${ramdisk_file}; " \
Wolfgang Grandegger870ee402012-09-29 09:27:00 +0000114 "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \
115 "run ramargs addip addcons addmtd; " \
Bartlomiej Sieka082da162007-05-27 17:26:46 +0200116 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
Wolfgang Grandegger870ee402012-09-29 09:27:00 +0000117 "fat_multi=run fat_args addip addmtd; fatload ide 0:1 " \
Bartlomiej Siekad14c4142007-05-08 10:23:56 +0200118 "${multi_image_addr} ${multi_image_file}; " \
119 "bootm ${multi_image_addr}\0" \
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100120 ""
Wolfgang Grandegger870ee402012-09-29 09:27:00 +0000121#define CONFIG_BOOTCOMMAND "run fat_multi"
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100122
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100123/*
124 * do board-specific init
125 */
126#define CONFIG_BOARD_EARLY_INIT_R 1
127
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100128/*
129 * Low level configuration
130 */
131
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100132/*
Bartlomiej Sieka7426cf12007-10-23 13:14:10 +0200133 * Clock configuration: SYS_XTALIN = 33MHz
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100134 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200135#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100136
Bartlomiej Siekadca82ba2007-05-08 09:39:12 +0200137/*
Bartlomiej Siekaa01420c2007-05-27 16:53:43 +0200138 * Set IPB speed to 100MHz
Bartlomiej Siekadca82ba2007-05-08 09:39:12 +0200139 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200140#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
Bartlomiej Siekadca82ba2007-05-08 09:39:12 +0200141
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100142/*
143 * Memory map
144 */
145/*
146 * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000.
147 * Setting MBAR to otherwise will cause system hang when using SmartDMA such
148 * as network commands.
149 */
Wolfgang Denk765be5c2010-10-20 08:31:45 +0200150#define CONFIG_SYS_MBAR 0xf0000000
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200151#define CONFIG_SYS_SDRAM_BASE 0x00000000
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100152
153/*
154 * If building for running out of SDRAM, then MBAR has been set up beforehand
155 * (e.g., by the BDI). Otherwise we must specify the default boot-up value of
156 * MBAR, as given in the doccumentation.
157 */
Wolfgang Denk0708bc62010-10-07 21:51:12 +0200158#if CONFIG_SYS_TEXT_BASE == 0x00100000
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200159#define CONFIG_SYS_DEFAULT_MBAR 0xf0000000
Wolfgang Denk0708bc62010-10-07 21:51:12 +0200160#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200161#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
162#define CONFIG_SYS_LOWBOOT 1
Wolfgang Denk0708bc62010-10-07 21:51:12 +0200163#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100164
165/* Use SRAM until RAM will be available */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200166#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
Wolfgang Denk1c2e98e2010-10-26 13:32:32 +0200167#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100168
Wolfgang Denk0191e472010-10-26 14:34:52 +0200169#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200170#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100171
Wolfgang Denk0708bc62010-10-07 21:51:12 +0200172#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200173#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
174#define CONFIG_SYS_RAMBOOT 1
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100175#endif
176
Wolfgang Grandegger870ee402012-09-29 09:27:00 +0000177#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200178#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */
179#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100180
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100181/*
182 * Chip selects configuration
183 */
184/* Boot Chipselect */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200185#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
186#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
187#define CONFIG_SYS_BOOTCS_CFG 0x00045D00
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100188
189/* Flash memory addressing */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200190#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
191#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
192#define CONFIG_SYS_CS0_CFG CONFIG_SYS_BOOTCS_CFG
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100193
194/* Dual Port SRAM -- Kollmorgen Drive memory addressing */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200195#define CONFIG_SYS_CS1_START 0x50000000
196#define CONFIG_SYS_CS1_SIZE 0x10000
197#define CONFIG_SYS_CS1_CFG 0x05055800
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100198
199/* Local register access */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200200#define CONFIG_SYS_CS2_START 0x50010000
201#define CONFIG_SYS_CS2_SIZE 0x10000
202#define CONFIG_SYS_CS2_CFG 0x05055800
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100203
204/* Anybus CompactCom Module memory addressing */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200205#define CONFIG_SYS_CS3_START 0x50020000
206#define CONFIG_SYS_CS3_SIZE 0x10000
207#define CONFIG_SYS_CS3_CFG 0x05055800
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100208
209/* No burst and dead cycle = 2 for all CSs */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200210#define CONFIG_SYS_CS_BURST 0x00000000
211#define CONFIG_SYS_CS_DEADCYCLE 0x22222222
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100212
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100213/*
214 * SDRAM configuration
215 */
Bartlomiej Sieka7426cf12007-10-23 13:14:10 +0200216/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */
217#define SDRAM_CONFIG1 0x62322900
218#define SDRAM_CONFIG2 0x88c70000
219#define SDRAM_CONTROL 0x504f0000
220#define SDRAM_MODE 0x00cd0000
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100221
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100222/*
223 * Flash configuration
224 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200225#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Jean-Christophe PLAGNIOL-VILLARD8d94c232008-08-13 01:40:42 +0200226#define CONFIG_FLASH_CFI_DRIVER 1
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200227#define CONFIG_SYS_FLASH_BASE 0xff000000
228#define CONFIG_SYS_FLASH_SIZE 0x01000000
229#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
230#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
231#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100232#define CONFIG_FLASH_16BIT /* Flash is 16-bit */
233
Piotr Kruszynski371507a2007-05-10 16:55:52 +0200234/*
235 * MTD configuration
236 */
Stefan Roeseb1423dd2009-03-19 13:30:36 +0100237#define CONFIG_CMD_MTDPARTS
Stefan Roese5dc958f2009-05-12 14:32:58 +0200238#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
239#define CONFIG_FLASH_CFI_MTD
Piotr Kruszynski371507a2007-05-10 16:55:52 +0200240#define MTDIDS_DEFAULT "nor0=motionpro-0"
241#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \
Wolfgang Grandegger870ee402012-09-29 09:27:00 +0000242 "13m(fs),2m(kernel),384k(uboot)," \
Bartlomiej Sieka7426cf12007-10-23 13:14:10 +0200243 "128k(env),128k(redund_env)," \
244 "128k(dtb),-(user_data)"
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100245
246/*
Bartlomiej Siekad14c4142007-05-08 10:23:56 +0200247 * IDE/ATA configuration
248 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200249#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
250#define CONFIG_SYS_IDE_MAXBUS 1
251#define CONFIG_SYS_IDE_MAXDEVICE 1
Bartlomiej Siekad14c4142007-05-08 10:23:56 +0200252#define CONFIG_IDE_PREINIT
253
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200254#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060
255#define CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_DATA_OFFSET
256#define CONFIG_SYS_ATA_STRIDE 4
Bartlomiej Siekad14c4142007-05-08 10:23:56 +0200257
Bartlomiej Siekad14c4142007-05-08 10:23:56 +0200258/*
Piotr Kruszynskib8894d02007-05-08 13:05:44 +0200259 * I2C configuration
260 */
261#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200262#define CONFIG_SYS_I2C_MODULE 2 /* select I2C module #2 */
263#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
264#define CONFIG_SYS_I2C_SLAVE 0x7F
Piotr Kruszynskib8894d02007-05-08 13:05:44 +0200265
Piotr Kruszynskib8894d02007-05-08 13:05:44 +0200266/*
267 * EEPROM configuration
268 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200269#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
270#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */
271#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */
Piotr Kruszynskib8894d02007-05-08 13:05:44 +0200272
Piotr Kruszynskib8894d02007-05-08 13:05:44 +0200273/*
274 * RTC configuration
275 */
276#define CONFIG_RTC_DS1337 1
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200277#define CONFIG_SYS_I2C_RTC_ADDR 0x68
Piotr Kruszynskib8894d02007-05-08 13:05:44 +0200278
Piotr Kruszynskib8894d02007-05-08 13:05:44 +0200279/*
Bartlomiej Siekac9e6a1e2007-05-27 16:51:48 +0200280 * Status LED configuration
281 */
Bartlomiej Siekac9e6a1e2007-05-27 16:51:48 +0200282
283#define ENABLE_GPIO_OUT 0x00000024
284#define LED_ON 0x00000010
285
Bartlomiej Siekac9e6a1e2007-05-27 16:51:48 +0200286/*
Bartlomiej Siekaf641fd72007-05-27 16:57:15 +0200287 * Temperature sensor
288 */
289#define CONFIG_DTT_LM75 1
290#define CONFIG_DTT_SENSORS { 0x49 }
291
Bartlomiej Siekaf641fd72007-05-27 16:57:15 +0200292/*
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100293 * Environment settings
294 */
Jean-Christophe PLAGNIOL-VILLARD53db4cd2008-09-10 22:48:04 +0200295#define CONFIG_ENV_IS_IN_FLASH 1
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100296/* This has to be a multiple of the Flash sector size */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200297#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
Jean-Christophe PLAGNIOL-VILLARD7e1cda62008-09-10 22:48:06 +0200298#define CONFIG_ENV_SIZE 0x1000
299#define CONFIG_ENV_SECT_SIZE 0x20000
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100300
Bartlomiej Sieka537e3212007-05-27 17:06:36 +0200301/* Configuration of redundant environment */
Jean-Christophe PLAGNIOL-VILLARD7e1cda62008-09-10 22:48:06 +0200302#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
303#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100304
305/*
306 * Pin multiplexing configuration
307 */
308
309/* PSC1: UART1
310 * PSC2: GPIO (default)
311 * PSC3: GPIO (default)
312 * USB: 2xUART4/5
313 * Ethernet: Ethernet 100Mbit with MD
314 * Timer: CAN2/GPIO
315 * PSC6/IRDA: GPIO (default)
316 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200317#define CONFIG_SYS_GPS_PORT_CONFIG 0x1105a004
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100318
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100319/*
Bartlomiej Sieka4ac54f92007-05-27 16:55:23 +0200320 * Motion-PRO's CPLD revision control register
321 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200322#define CPLD_REV_REGISTER (CONFIG_SYS_CS2_START + 0x06)
Bartlomiej Sieka4ac54f92007-05-27 16:55:23 +0200323
Bartlomiej Sieka4ac54f92007-05-27 16:55:23 +0200324/*
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100325 * Miscellaneous configurable options
326 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200327#define CONFIG_SYS_LONGHELP /* undef to save memory */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200328#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
329#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
330#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
331#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100332
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200333#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
334#define CONFIG_SYS_MEMTEST_END 0x03e00000 /* 1 ... 62 MiB in DRAM */
335#define CONFIG_SYS_ALT_MEMTEST
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100336
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200337#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default kernel load addr */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100338
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100339/*
340 * Various low-level settings
341 */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200342#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
343#define CONFIG_SYS_HID0_FINAL HID0_ICE
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100344
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200345#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100346
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100347/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
Jean-Christophe PLAGNIOL-VILLARD03836942008-10-16 15:01:15 +0200348#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100349
Bartlomiej Sieka8daee212007-05-08 09:21:57 +0200350#define OF_CPU "PowerPC,5200@0"
351#define OF_SOC "soc5200@f0000000"
352#define OF_TBCLK (bd->bi_busfreq / 4)
Bartlomiej Sieka082da162007-05-27 17:26:46 +0200353#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
Bartlomiej Sieka8daee212007-05-08 09:21:57 +0200354
Bartlomiej Siekac619a9f2007-02-09 10:45:42 +0100355#endif /* __CONFIG_H */