| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/leds/leds-aw2013.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: AWINIC AW2013 3-channel LED Driver |
| 8 | |
| 9 | maintainers: |
| 10 | - Nikita Travkin <nikitos.tr@gmail.com> |
| 11 | |
| 12 | description: | |
| 13 | The AW2013 is a 3-channel LED driver with I2C interface. It can control |
| 14 | LED brightness with PWM output. |
| 15 | |
| 16 | properties: |
| 17 | compatible: |
| 18 | const: awinic,aw2013 |
| 19 | |
| 20 | reg: |
| 21 | maxItems: 1 |
| 22 | |
| 23 | interrupts: |
| 24 | maxItems: 1 |
| 25 | description: Open-drain, low active interrupt pin "INTN". |
| 26 | Used to report completion of operations (power up, LED breath effects). |
| 27 | |
| 28 | vcc-supply: |
| 29 | description: Regulator providing power to the "VCC" pin. |
| 30 | |
| 31 | vio-supply: |
| 32 | description: Regulator providing power for pull-up of the I/O lines. |
| 33 | "VIO1" in the typical application circuit example of the datasheet. |
| 34 | Note that this regulator does not directly connect to AW2013, but is |
| 35 | needed for the correct operation of the interrupt and I2C lines. |
| 36 | |
| 37 | "#address-cells": |
| 38 | const: 1 |
| 39 | |
| 40 | "#size-cells": |
| 41 | const: 0 |
| 42 | |
| 43 | patternProperties: |
| 44 | "^led@[0-2]$": |
| 45 | type: object |
| 46 | $ref: common.yaml# |
| 47 | unevaluatedProperties: false |
| 48 | |
| 49 | properties: |
| 50 | reg: |
| 51 | description: Index of the LED. |
| 52 | minimum: 0 |
| 53 | maximum: 2 |
| 54 | |
| 55 | required: |
| 56 | - compatible |
| 57 | - reg |
| 58 | - "#address-cells" |
| 59 | - "#size-cells" |
| 60 | |
| 61 | additionalProperties: false |
| 62 | |
| 63 | examples: |
| 64 | - | |
| 65 | #include <dt-bindings/gpio/gpio.h> |
| 66 | #include <dt-bindings/interrupt-controller/irq.h> |
| 67 | #include <dt-bindings/leds/common.h> |
| 68 | |
| 69 | i2c { |
| 70 | #address-cells = <1>; |
| 71 | #size-cells = <0>; |
| 72 | |
| 73 | led-controller@45 { |
| 74 | compatible = "awinic,aw2013"; |
| 75 | reg = <0x45>; |
| 76 | interrupts = <42 IRQ_TYPE_LEVEL_LOW>; |
| 77 | #address-cells = <1>; |
| 78 | #size-cells = <0>; |
| 79 | |
| 80 | vcc-supply = <&pm8916_l17>; |
| 81 | |
| 82 | led@0 { |
| 83 | reg = <0>; |
| 84 | led-max-microamp = <5000>; |
| 85 | function = LED_FUNCTION_INDICATOR; |
| 86 | color = <LED_COLOR_ID_RED>; |
| 87 | }; |
| 88 | |
| 89 | led@1 { |
| 90 | reg = <1>; |
| 91 | led-max-microamp = <5000>; |
| 92 | function = LED_FUNCTION_INDICATOR; |
| 93 | color = <LED_COLOR_ID_GREEN>; |
| 94 | }; |
| 95 | |
| 96 | led@2 { |
| 97 | reg = <2>; |
| 98 | led-max-microamp = <5000>; |
| 99 | function = LED_FUNCTION_INDICATOR; |
| 100 | color = <LED_COLOR_ID_BLUE>; |
| 101 | }; |
| 102 | }; |
| 103 | }; |
| 104 | ... |