Blame - drivers/phy/Kconfig - filogic/uboot

blob: e12347e8a031b478e2e474935c0d8ea4ebe224df [file] [log] [blame]

Jean-Jacques Hiblot	4844778	2017-04-24 11:51:27 +0200	[diff] [blame]	1
				2	menu "PHY Subsystem"
				3
				4	config PHY
				5	bool "PHY Core"
				6	depends on DM
				7	help
				8	PHY support.
				9
				10	This framework is designed to provide a generic interface for PHY
				11	devices. PHY devices are dedicated hardware that handle the physical
				12	layer of the protocols in the OSI model.
				13	PHYs are commonly used for high speed interfaces such as Serial-ATA
				14	or PCI express.
				15	The API provides functions to initialize/deinitialize the
				16	PHY, power on/off the PHY, and reset the PHY. It's meant to be as
				17	compatible as possible with the equivalent framework found in the
				18	linux kernel.
				19
				20	config SPL_PHY
				21	bool "PHY Core in SPL"
Adam Ford	ac4d80e	2019-08-24 13:50:34 -0500	[diff] [blame]	22	depends on DM && SPL
Jean-Jacques Hiblot	4844778	2017-04-24 11:51:27 +0200	[diff] [blame]	23	help
				24	PHY support in SPL.
				25
				26	This framework is designed to provide a generic interface for PHY
				27	devices. PHY devices are dedicated hardware that handle the physical
				28	layer of the protocols (https://en.wikipedia.org/wiki/OSI_model).
				29	PHYs are commonly used for high speed interfaces such as Serial-ATA
				30	or PCI express.
				31	The API provides functions to initialize/deinitialize the
				32	PHY, power on/off the PHY, and reset the PHY. It's meant to be as
				33	compatible as possible with the equivalent framework found in the
				34	linux kernel.
				35
Jean-Jacques Hiblot	7e9db02	2017-04-24 11:51:28 +0200	[diff] [blame]	36	config PHY_SANDBOX
				37	bool "Sandbox PHY support"
				38	depends on SANDBOX
				39	depends on PHY
				40	help
				41	This select a dummy sandbox PHY driver. It used only to implement
				42	the unit tests for the phy framework
				43
Jean-Jacques Hiblot	c2da3e3	2017-07-24 15:18:15 +0200	[diff] [blame]	44	config NOP_PHY
				45	bool "NOP PHY driver"
				46	depends on PHY
				47	help
				48	Support for a no-op PHY driver (stubbed PHY driver).
				49
				50	This is useful when a driver uses the PHY framework but no real PHY
				51	hardware exists.
				52
				53	config SPL_NOP_PHY
				54	bool "NOP PHY driver in SPL"
				55	depends on SPL_PHY
				56	help
				57	Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
				58
				59	This is useful when a driver uses the PHY framework but no real PHY
				60	hardware exists.
				61
Neil Armstrong	466fa15	2020-12-29 14:58:58 +0100	[diff] [blame]	62	config MIPI_DPHY_HELPERS
				63	bool "MIPI D-PHY support helpers"
				64	help
				65	Provides a number of helpers a core functions for MIPI D-PHY drivers.
				66
Stephan Gerhold	bd51911	2021-07-08 20:33:49 +0200	[diff] [blame]	67	config AB8500_USB_PHY
				68	bool "AB8500 USB PHY Driver"
				69	depends on PHY && PMIC_AB8500
				70	help
				71	Support for the USB OTG PHY in ST-Ericsson AB8500.
				72
Mark Kettenis	23d9898	2023-07-14 22:21:42 +0200	[diff] [blame]	73	config APPLE_ATCPHY
				74	bool "Apple Type-C PHY Driver"
				75	depends on PHY && ARCH_APPLE
				76	default y
				77	help
				78	Support for the Apple Type-C PHY.
				79
				80	This is a dummy driver since the PHY is initialized
				81	sufficiently by previous stage firmware.
				82
Álvaro Fernández Rojas	66871b7	2018-02-04 21:11:15 +0100	[diff] [blame]	83	config BCM6318_USBH_PHY
				84	bool "BCM6318 USBH PHY support"
				85	depends on PHY && ARCH_BMIPS
				86	select POWER_DOMAIN
				87	help
				88	Support for the Broadcom MIPS BCM6318 USBH PHY.
				89
Álvaro Fernández Rojas	b3c963a	2018-02-04 11:18:24 +0100	[diff] [blame]	90	config BCM6348_USBH_PHY
				91	bool "BCM6348 USBH PHY support"
				92	depends on PHY && ARCH_BMIPS
				93	help
				94	Support for the Broadcom MIPS BCM6348 USBH PHY.
				95
Álvaro Fernández Rojas	54a1fb6	2018-02-04 11:19:11 +0100	[diff] [blame]	96	config BCM6358_USBH_PHY
				97	bool "BCM6358 USBH PHY support"
				98	depends on PHY && ARCH_BMIPS
				99	help
				100	Support for the Broadcom MIPS BCM6358 USBH PHY.
				101
Álvaro Fernández Rojas	dbb6baf	2018-02-04 21:10:13 +0100	[diff] [blame]	102	config BCM6368_USBH_PHY
				103	bool "BCM6368 USBH PHY support"
				104	depends on PHY && ARCH_BMIPS
				105	help
				106	Support for the Broadcom MIPS BCM6368 USBH PHY.
				107
Srinath Mannam	7568702	2020-04-02 16:08:12 +0530	[diff] [blame]	108	config BCM_SR_PCIE_PHY
				109	bool "Broadcom Stingray PCIe PHY driver"
				110	depends on PHY
				111	help
				112	Enable this to support the Broadcom Stingray PCIe PHY
				113	If unsure, say N.
				114
Adam Ford	9442e74	2019-07-10 13:59:09 -0500	[diff] [blame]	115	config PHY_DA8XX_USB
				116	tristate "TI DA8xx USB PHY Driver"
				117	depends on PHY && ARCH_DAVINCI
				118	help
				119	Enable this to support the USB PHY on DA8xx SoCs.
				120
Jean-Jacques Hiblot	73e95eb	2017-04-24 11:51:29 +0200	[diff] [blame]	121	config PIPE3_PHY
				122	bool "Support omap's PIPE3 PHY"
Jean-Jacques Hiblot	5a3d1c6	2017-07-07 12:13:34 +0200	[diff] [blame]	123	depends on PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot	73e95eb	2017-04-24 11:51:29 +0200	[diff] [blame]	124	help
				125	Support for the omap PIPE3 phy for sata
				126
				127	This PHY is found on omap devices supporting SATA such as dra7, am57x
				128	and omap5
				129
				130	config SPL_PIPE3_PHY
				131	bool "Support omap's PIPE3 PHY in SPL"
Jean-Jacques Hiblot	5a3d1c6	2017-07-07 12:13:34 +0200	[diff] [blame]	132	depends on SPL_PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot	73e95eb	2017-04-24 11:51:29 +0200	[diff] [blame]	133	help
				134	Support for the omap PIPE3 phy for sata in SPL
				135
				136	This PHY is found on omap devices supporting SATA such as dra7, am57x
				137	and omap5
				138
Sekhar Nori	114b0bc	2019-08-01 19:12:58 +0530	[diff] [blame]	139	config AM654_PHY
				140	tristate "TI AM654 SERDES support"
				141	depends on PHY && ARCH_K3
				142	select REGMAP
				143	select SYSCON
				144	help
				145	This option enables support for TI AM654 SerDes PHY used for
				146	PCIe.
				147
Patrice Chotard	6b33651	2017-09-05 11:04:21 +0200	[diff] [blame]	148	config STI_USB_PHY
				149	bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
				150	depends on PHY && ARCH_STI
				151	help
				152	This is the generic phy driver for the picoPHY ports
				153	used by USB2 and USB3 Host controllers available on
				154	STiH407 SoC families.
				155
Marek Vasut	484961c	2018-08-05 15:22:19 +0200	[diff] [blame]	156	config PHY_RCAR_GEN2
				157	tristate "Renesas R-Car Gen2 USB PHY"
				158	depends on PHY && RCAR_GEN2
				159	help
				160	Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
				161	PHY connected to USBHS module, PCI EHCI module and USB3.0 module and
				162	allows configuring the module multiplexing.
				163
Marek Vasut	c31c4b1	2018-10-02 22:31:47 +0200	[diff] [blame]	164	config PHY_RCAR_GEN3
				165	tristate "Renesas R-Car Gen3 USB PHY"
				166	depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR
				167	default y if RCAR_GEN3
				168	help
				169	Support for the Renesas R-Car Gen3 USB PHY. This driver operates the
				170	PHY connected to EHCI USB module and controls USB OTG operation.
				171
Patrice Chotard	226d87b	2018-04-27 11:01:55 +0200	[diff] [blame]	172	config PHY_STM32_USBPHYC
				173	tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
				174	depends on PHY && ARCH_STM32MP
				175	help
				176	Enable this to support the High-Speed USB transceiver that is part of
				177	STMicroelectronics STM32 SoCs.
				178
				179	This driver controls the entire USB PHY block: the USB PHY controller
				180	(USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
				181	used by an HS USB Host controller, and the second one is shared
				182	between an HS USB OTG controller and an HS USB Host controller,
				183	selected by an USB switch.
				184
Beniamino Galvani	86724a5	2019-08-18 15:42:54 +0200	[diff] [blame]	185	config MESON_GXBB_USB_PHY
				186	bool "Amlogic Meson GXBB USB PHY"
				187	depends on PHY && ARCH_MESON && MESON_GXBB
				188	imply REGMAP
				189	help
				190	This is the generic phy driver for the Amlogic Meson GXBB
				191	USB2 PHY.
				192
Neil Armstrong	1cbd9ae	2018-04-11 17:08:02 +0200	[diff] [blame]	193	config MESON_GXL_USB_PHY
				194	bool "Amlogic Meson GXL USB PHYs"
Neil Armstrong	c90263c	2020-09-10 10:48:16 +0200	[diff] [blame]	195	depends on PHY && ARCH_MESON && (MESON_GXL \|\| MESON_GXM \|\| MESON_AXG)
Neil Armstrong	1cbd9ae	2018-04-11 17:08:02 +0200	[diff] [blame]	196	imply REGMAP
				197	help
				198	This is the generic phy driver for the Amlogic Meson GXL
				199	USB2 and USB3 PHYS.
				200
Neil Armstrong	5fe837d	2019-02-19 15:17:29 +0100	[diff] [blame]	201	config MESON_G12A_USB_PHY
				202	bool "Amlogic Meson G12A USB PHYs"
Alexey Romanov	b2340a4	2023-10-05 11:54:26 +0300	[diff] [blame]	203	depends on PHY && ARCH_MESON && (MESON_G12A \|\| MESON_A1)
Neil Armstrong	5fe837d	2019-02-19 15:17:29 +0100	[diff] [blame]	204	imply REGMAP
				205	help
				206	This is the generic phy driver for the Amlogic Meson G12A
				207	USB2 and USB3 PHYS.
				208
Neil Armstrong	90f9ecd	2020-12-29 14:59:00 +0100	[diff] [blame]	209	config MESON_AXG_MIPI_DPHY
				210	bool "Amlogic Meson AXG MIPI D-PHY"
				211	depends on PHY && ARCH_MESON && MESON_AXG
				212	select MIPI_DPHY_HELPERS
				213	imply REGMAP
				214	help
				215	This is the generic phy driver for the Amlogic Meson AXG
				216	MIPI D-PHY.
				217
Neil Armstrong	d8d1169	2020-12-29 14:59:01 +0100	[diff] [blame]	218	config MESON_AXG_MIPI_PCIE_ANALOG_PHY
				219	bool "Amlogic Meson AXG MIPI PCIe Analog PHY"
				220	depends on PHY && ARCH_MESON && MESON_AXG
				221	select MIPI_DPHY_HELPERS
				222	imply REGMAP
				223	help
				224	This is the generic phy driver for the Amlogic Meson AXG
				225	MIPI PCIe Analog PHY.
				226
Jean-Jacques Hiblot	4530571	2018-11-29 10:57:39 +0100	[diff] [blame]	227	config OMAP_USB2_PHY
				228	bool "Support OMAP's USB2 PHY"
				229	depends on PHY
				230	depends on SYSCON
				231	help
				232	Support for the OMAP's USB2 PHY.
				233
				234	This PHY is found on OMAP devices supporting USB2.
				235
Jean-Jacques Hiblot	a5bb671	2018-12-04 11:12:59 +0100	[diff] [blame]	236
				237	config KEYSTONE_USB_PHY
				238	bool "Support TI Keystone USB PHY"
				239	depends on PHY
				240	depends on ARCH_KEYSTONE
				241	help
				242	Support for the USB PHY found on some Keystone (k2) processors
				243
				244	This PHY is found on some Keystone (K2) devices supporting USB.
				245
developer	19cf577	2020-11-12 16:36:48 +0800	[diff] [blame]	246	config MT7620_USB_PHY
				247	bool "MediaTek MT7620 USB PHY support"
				248	depends on PHY
				249	depends on SOC_MT7620
				250	help
				251	Support the intergated USB PHY in MediaTek MT7620 SoC
				252
Stefan Roese	67e02df	2019-04-05 13:44:43 +0200	[diff] [blame]	253	config MT76X8_USB_PHY
				254	bool "MediaTek MT76x8 (7628/88) USB PHY support"
				255	depends on PHY
developer	065e7dd	2019-09-25 17:45:31 +0800	[diff] [blame]	256	depends on SOC_MT7628
Stefan Roese	67e02df	2019-04-05 13:44:43 +0200	[diff] [blame]	257	help
				258	Support the USB PHY in MT76x8 SoCs
				259
				260	This PHY is found on MT76x8 devices supporting USB.
				261
developer	7b27b8d	2019-08-22 12:26:50 +0200	[diff] [blame]	262	config PHY_MTK_TPHY
				263	bool "MediaTek T-PHY Driver"
				264	depends on PHY
developer	f37e4f2	2022-05-20 11:23:01 +0800	[diff] [blame]	265	depends on ARCH_MEDIATEK \|\| SOC_MT7621
Christian Marangi	198a378	2024-06-24 23:03:27 +0200	[diff] [blame]	266	select REGMAP
				267	select SYSCON
developer	7b27b8d	2019-08-22 12:26:50 +0200	[diff] [blame]	268	help
				269	MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and
				270	SATA, and meanwhile supports two version T-PHY which have
				271	different banks layout, the T-PHY with shared banks between
				272	multi-ports is first version, otherwise is second veriosn,
				273	so you can easily distinguish them by banks layout.
				274
Jim Liu	9a215e8	2022-06-21 17:03:38 +0800	[diff] [blame]	275	config PHY_NPCM_USB
				276	bool "Nuvoton NPCM USB PHY support"
				277	depends on PHY
				278	depends on ARCH_NPCM
				279	help
				280	Support the USB PHY in NPCM SoCs
				281
Ye Li	fde01d9	2021-02-21 08:26:21 -0800	[diff] [blame]	282	config PHY_IMX8MQ_USB
Marek Vasut	c55fbc4	2022-04-01 03:18:31 +0200	[diff] [blame]	283	bool "NXP i.MX8MQ/i.MX8MP USB PHY Driver"
Ye Li	fde01d9	2021-02-21 08:26:21 -0800	[diff] [blame]	284	depends on PHY
Marek Vasut	c55fbc4	2022-04-01 03:18:31 +0200	[diff] [blame]	285	depends on IMX8MQ \|\| IMX8MP
Ye Li	fde01d9	2021-02-21 08:26:21 -0800	[diff] [blame]	286	help
Marek Vasut	c55fbc4	2022-04-01 03:18:31 +0200	[diff] [blame]	287	Support the USB3.0 PHY in NXP i.MX8MQ or i.MX8MP SoC
Ye Li	fde01d9	2021-02-21 08:26:21 -0800	[diff] [blame]	288
Sumit Garg	2c71451	2024-03-21 20:25:02 +0530	[diff] [blame]	289	config PHY_IMX8M_PCIE
				290	bool "NXP i.MX8MM/i.MX8MP PCIe PHY Driver"
				291	depends on PHY
				292	depends on IMX8MM \|\| IMX8MP
				293	select REGMAP
				294	select SYSCON
				295	help
				296	Support the PCIe PHY in NXP i.MX8MM or i.MX8MP SoC
				297
				298	This PHY is found on i.MX8M devices supporting PCIe.
				299
Michal Simek	0be35ab	2022-01-06 09:49:41 +0100	[diff] [blame]	300	config PHY_XILINX_ZYNQMP
				301	tristate "Xilinx ZynqMP PHY driver"
				302	depends on PHY && ARCH_ZYNQMP
				303	help
				304	Enable this to support ZynqMP High Speed Gigabit Transceiver
				305	that is part of ZynqMP SoC.
				306
Jagan Teki	70e882f	2020-05-26 11:33:44 +0800	[diff] [blame]	307	source "drivers/phy/rockchip/Kconfig"
Alan Douglas	fda76da	2021-07-21 21:28:36 +0530	[diff] [blame]	308	source "drivers/phy/cadence/Kconfig"
Jean-Jacques Hiblot	065788e	2021-07-21 21:28:38 +0530	[diff] [blame]	309	source "drivers/phy/ti/Kconfig"
Sumit Garg	302d5a4	2022-08-04 19:57:09 +0530	[diff] [blame]	310	source "drivers/phy/qcom/Kconfig"
Marek Vasut	8ec3077	2023-03-19 18:09:43 +0100	[diff] [blame]	311	source "drivers/phy/renesas/Kconfig"
Alan Douglas	fda76da	2021-07-21 21:28:36 +0530	[diff] [blame]	312
Jean-Jacques Hiblot	4844778	2017-04-24 11:51:27 +0200	[diff] [blame]	313	endmenu