| Prabhakar Kushwaha | 5543250 | 2016-06-03 18:41:34 +0530 | [diff] [blame] | 1 | Overview |
| 2 | -------- |
| 3 | QorIQ LS1012A Development System (LS1012AQDS) is a high-performance |
| 4 | development platform, with a complete debugging environment. |
| 5 | The LS1012AQDS board supports the QorIQ LS1012A processor and is |
| 6 | optimized to support the high-bandwidth DDR3L memory and |
| 7 | a full complement of high-speed SerDes ports. |
| 8 | |
| 9 | LS1012A SoC Overview |
| 10 | -------------------- |
| 11 | Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A |
| 12 | SoC overview. |
| 13 | |
| 14 | LS1012AQDS board Overview |
| 15 | ----------------------- |
| 16 | - SERDES Connections, 4 lanes supporting: |
| 17 | - PCI Express - 3.0 |
| 18 | - SGMII, SGMII 2.5 |
| 19 | - SATA 3.0 |
| 20 | - DDR Controller |
| 21 | - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s |
| 22 | - QSPI Controller |
| 23 | - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select |
| 24 | signals to QSPI NOR flash memory (2 virtual banks) and the QSPI |
| 25 | emulator |
| 26 | - USB 3.0 |
| 27 | - One USB 3.0 controller with integrated PHY |
| 28 | - One high-speed USB 3.0 port |
| 29 | - USB 2.0 |
| 30 | - One USB 2.0 controller with ULPI interface |
| 31 | - Two enhanced secure digital host controllers: |
| 32 | - SDHC1 controller can be connected to onboard SDHC connector |
| 33 | - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices |
| 34 | - 2 I2C controllers |
| 35 | - One SATA onboard connectors |
| 36 | - UART |
| 37 | - 5 SAI |
| 38 | - One SAI port with audio codec SGTL5000: |
| 39 | • Provides MIC bias |
| 40 | • Provides headphone and line output |
| 41 | - One SAI port terminated at 2x6 header |
| 42 | - Three SAI Tx/Rx ports terminated at 2x3 headers |
| 43 | - ARM JTAG support |
| 44 | |
| 45 | Booting Options |
| 46 | --------------- |
| 47 | a) QSPI Flash Emu Boot |
| 48 | b) QSPI Flash 1 |
| 49 | c) QSPI Flash 2 |
| 50 | |
| 51 | QSPI flash map |
| 52 | -------------- |
| 53 | Images | Size |QSPI Flash Address |
| 54 | ------------------------------------------ |
| 55 | RCW + PBI | 1MB | 0x4000_0000 |
| 56 | U-boot | 1MB | 0x4010_0000 |
| 57 | U-boot Env | 1MB | 0x4020_0000 |
| 58 | PPA FIT image | 2MB | 0x4050_0000 |
| 59 | Linux ITB | ~53MB | 0x40A0_0000 |