blob: 421e2fe38c5cfdbc1c8dd599abb954d0ff372754 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Calvin Johnsonb2231452018-03-08 15:30:29 +05302/*
3 * Copyright 2015-2016 Freescale Semiconductor, Inc.
4 * Copyright 2017 NXP
Calvin Johnsonb2231452018-03-08 15:30:29 +05305 */
6
7#include <common.h>
8#include <dm.h>
9#include <asm/io.h>
10#include <netdev.h>
11#include <fm_eth.h>
12#include <fsl_mdio.h>
13#include <malloc.h>
14#include <asm/types.h>
15#include <fsl_dtsec.h>
16#include <asm/arch/soc.h>
17#include <asm/arch-fsl-layerscape/config.h>
18#include <asm/arch-fsl-layerscape/immap_lsch2.h>
19#include <asm/arch/fsl_serdes.h>
20#include <net/pfe_eth/pfe_eth.h>
21#include <dm/platform_data/pfe_dm_eth.h>
22
23#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
24#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
25
26#define MASK_ETH_PHY_RST 0x00000100
27
28static inline void ls1012afrdm_reset_phy(void)
29{
30 unsigned int val;
31 struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR);
32
33 setbits_be32(&pgpio->gpdir, MASK_ETH_PHY_RST);
34
35 val = in_be32(&pgpio->gpdat);
36 setbits_be32(&pgpio->gpdat, val & ~MASK_ETH_PHY_RST);
37 mdelay(10);
38
39 val = in_be32(&pgpio->gpdat);
40 setbits_be32(&pgpio->gpdat, val | MASK_ETH_PHY_RST);
41 mdelay(50);
42}
43
44int pfe_eth_board_init(struct udevice *dev)
45{
46 static int init_done;
47 struct mii_dev *bus;
48 struct pfe_mdio_info mac_mdio_info;
49 struct pfe_eth_dev *priv = dev_get_priv(dev);
50
51 if (!init_done) {
52 ls1012afrdm_reset_phy();
53
54 mac_mdio_info.reg_base = (void *)EMAC1_BASE_ADDR;
55 mac_mdio_info.name = DEFAULT_PFE_MDIO_NAME;
56
57 bus = pfe_mdio_init(&mac_mdio_info);
58 if (!bus) {
59 printf("Failed to register mdio\n");
60 return -1;
61 }
62
63 init_done = 1;
64 }
65
66 if (priv->gemac_port) {
67 mac_mdio_info.reg_base = (void *)EMAC2_BASE_ADDR;
68 mac_mdio_info.name = DEFAULT_PFE_MDIO1_NAME;
69 bus = pfe_mdio_init(&mac_mdio_info);
70 if (!bus) {
71 printf("Failed to register mdio\n");
72 return -1;
73 }
74 }
75
76 pfe_set_mdio(priv->gemac_port,
77 miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME));
78 if (!priv->gemac_port)
79 /* MAC1 */
80 pfe_set_phy_address_mode(priv->gemac_port,
81 CONFIG_PFE_EMAC1_PHY_ADDR,
82 PHY_INTERFACE_MODE_SGMII);
83 else
84 /* MAC2 */
85 pfe_set_phy_address_mode(priv->gemac_port,
86 CONFIG_PFE_EMAC2_PHY_ADDR,
87 PHY_INTERFACE_MODE_SGMII);
88 return 0;
89}
90
91static struct pfe_eth_pdata pfe_pdata0 = {
92 .pfe_eth_pdata_mac = {
93 .iobase = (phys_addr_t)EMAC1_BASE_ADDR,
94 .phy_interface = 0,
95 },
96
97 .pfe_ddr_addr = {
98 .ddr_pfe_baseaddr = (void *)CONFIG_DDR_PFE_BASEADDR,
99 .ddr_pfe_phys_baseaddr = CONFIG_DDR_PFE_PHYS_BASEADDR,
100 },
101};
102
103static struct pfe_eth_pdata pfe_pdata1 = {
104 .pfe_eth_pdata_mac = {
105 .iobase = (phys_addr_t)EMAC2_BASE_ADDR,
106 .phy_interface = 1,
107 },
108
109 .pfe_ddr_addr = {
110 .ddr_pfe_baseaddr = (void *)CONFIG_DDR_PFE_BASEADDR,
111 .ddr_pfe_phys_baseaddr = CONFIG_DDR_PFE_PHYS_BASEADDR,
112 },
113};
114
115U_BOOT_DEVICE(ls1012a_pfe0) = {
116 .name = "pfe_eth",
117 .platdata = &pfe_pdata0,
118};
119
120U_BOOT_DEVICE(ls1012a_pfe1) = {
121 .name = "pfe_eth",
122 .platdata = &pfe_pdata1,
123};