Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2014 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <command.h> |
| 9 | #include <i2c.h> |
| 10 | #include <netdev.h> |
| 11 | #include <linux/compiler.h> |
| 12 | #include <asm/mmu.h> |
| 13 | #include <asm/processor.h> |
| 14 | #include <asm/immap_85xx.h> |
| 15 | #include <asm/fsl_law.h> |
| 16 | #include <asm/fsl_serdes.h> |
| 17 | #include <asm/fsl_portals.h> |
| 18 | #include <asm/fsl_liodn.h> |
| 19 | #include <asm/mpc85xx_gpio.h> |
| 20 | #include <fm_eth.h> |
| 21 | #include "t102xrdb.h" |
| 22 | #include "cpld.h" |
| 23 | |
| 24 | DECLARE_GLOBAL_DATA_PTR; |
| 25 | |
| 26 | int checkboard(void) |
| 27 | { |
| 28 | struct cpu_type *cpu = gd->arch.cpu; |
| 29 | static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"}; |
| 30 | |
| 31 | printf("Board: %sRDB, ", cpu->name); |
| 32 | printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ", |
| 33 | CPLD_READ(hw_ver), CPLD_READ(sw_ver)); |
| 34 | |
| 35 | #ifdef CONFIG_SDCARD |
| 36 | puts("SD/MMC\n"); |
| 37 | #elif CONFIG_SPIFLASH |
| 38 | puts("SPI\n"); |
| 39 | #else |
| 40 | u8 reg; |
| 41 | |
| 42 | reg = CPLD_READ(flash_csr); |
| 43 | |
| 44 | if (reg & CPLD_BOOT_SEL) { |
| 45 | puts("NAND\n"); |
| 46 | } else { |
| 47 | reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT); |
| 48 | printf("NOR vBank%d\n", reg); |
| 49 | } |
| 50 | #endif |
| 51 | |
| 52 | puts("SERDES Reference Clocks:\n"); |
| 53 | printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]); |
| 54 | |
| 55 | return 0; |
| 56 | } |
| 57 | |
| 58 | int board_early_init_r(void) |
| 59 | { |
| 60 | #ifdef CONFIG_SYS_FLASH_BASE |
| 61 | const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; |
| 62 | int flash_esel = find_tlb_idx((void *)flashbase, 1); |
| 63 | /* |
| 64 | * Remap Boot flash region to caching-inhibited |
| 65 | * so that flash can be erased properly. |
| 66 | */ |
| 67 | |
| 68 | /* Flush d-cache and invalidate i-cache of any FLASH data */ |
| 69 | flush_dcache(); |
| 70 | invalidate_icache(); |
| 71 | if (flash_esel == -1) { |
| 72 | /* very unlikely unless something is messed up */ |
| 73 | puts("Error: Could not find TLB for FLASH BASE\n"); |
| 74 | flash_esel = 2; /* give our best effort to continue */ |
| 75 | } else { |
| 76 | /* invalidate existing TLB entry for flash + promjet */ |
| 77 | disable_tlb(flash_esel); |
| 78 | } |
| 79 | |
| 80 | set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, |
| 81 | MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 82 | 0, flash_esel, BOOKE_PAGESZ_256M, 1); |
| 83 | #endif |
| 84 | |
| 85 | set_liodns(); |
| 86 | #ifdef CONFIG_SYS_DPAA_QBMAN |
| 87 | setup_portals(); |
| 88 | #endif |
| 89 | |
| 90 | return 0; |
| 91 | } |
| 92 | |
| 93 | unsigned long get_board_sys_clk(void) |
| 94 | { |
| 95 | return CONFIG_SYS_CLK_FREQ; |
| 96 | } |
| 97 | |
| 98 | unsigned long get_board_ddr_clk(void) |
| 99 | { |
| 100 | return CONFIG_DDR_CLK_FREQ; |
| 101 | } |
| 102 | |
| 103 | int misc_init_r(void) |
| 104 | { |
| 105 | return 0; |
| 106 | } |
| 107 | |
| 108 | int ft_board_setup(void *blob, bd_t *bd) |
| 109 | { |
| 110 | phys_addr_t base; |
| 111 | phys_size_t size; |
| 112 | |
| 113 | ft_cpu_setup(blob, bd); |
| 114 | |
| 115 | base = getenv_bootm_low(); |
| 116 | size = getenv_bootm_size(); |
| 117 | |
| 118 | fdt_fixup_memory(blob, (u64)base, (u64)size); |
| 119 | |
| 120 | #ifdef CONFIG_PCI |
| 121 | pci_of_setup(blob, bd); |
| 122 | #endif |
| 123 | |
| 124 | fdt_fixup_liodn(blob); |
| 125 | fdt_fixup_dr_usb(blob, bd); |
| 126 | |
| 127 | #ifdef CONFIG_SYS_DPAA_FMAN |
| 128 | fdt_fixup_fman_ethernet(blob); |
| 129 | fdt_fixup_board_enet(blob); |
| 130 | #endif |
| 131 | |
| 132 | return 0; |
| 133 | } |
| 134 | |
| 135 | #ifdef CONFIG_DEEP_SLEEP |
| 136 | void board_mem_sleep_setup(void) |
| 137 | { |
| 138 | /* does not provide HW signals for power management */ |
| 139 | CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40)); |
| 140 | /* Disable MCKE isolation */ |
| 141 | gpio_set_value(2, 0); |
| 142 | udelay(1); |
| 143 | } |
| 144 | #endif |