Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / f7e52843e12021eb6f7f1733bcf4527cc905ec6a / . / dts / upstream / src / arm / qcom / qcom-msm8974-sony-xperia-rhine.dtsi
blob: 68a2f9094e536f758b25ed0e97d97fc87257b71e [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-msm8974.dtsi"
3#include "qcom-pm8841.dtsi"
4#include "qcom-pm8941.dtsi"
5#include <dt-bindings/input/input.h>
6#include <dt-bindings/leds/common.h>
7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9/ {
10 aliases {
11 serial0 = &blsp1_uart2;
12 };
13
14 chosen {
15 stdout-path = "serial0:115200n8";
16 };
17
18 gpio-keys {
19 compatible = "gpio-keys";
20
21 pinctrl-names = "default";
22 pinctrl-0 = <&gpio_keys_pin_a>;
23
24 key-volume-down {
25 label = "volume_down";
26 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
27 linux,input-type = <1>;
28 linux,code = <KEY_VOLUMEDOWN>;
29 };
30
31 key-camera-snapshot {
32 label = "camera_snapshot";
33 gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
34 linux,input-type = <1>;
35 linux,code = <KEY_CAMERA>;
36 };
37
38 key-camera-focus {
39 label = "camera_focus";
40 gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
41 linux,input-type = <1>;
42 linux,code = <KEY_CAMERA_FOCUS>;
43 };
44
45 key-volume-up {
46 label = "volume_up";
47 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
48 linux,input-type = <1>;
49 linux,code = <KEY_VOLUMEUP>;
50 };
51 };
52
53 reserved-memory {
54 #address-cells = <1>;
55 #size-cells = <1>;
56 ranges;
57
58 ramoops@3e8e0000 {
59 compatible = "ramoops";
60 reg = <0x3e8e0000 0x200000>;
61
62 console-size = <0x100000>;
63 record-size = <0x10000>;
64 ftrace-size = <0x10000>;
65 pmsg-size = <0x80000>;
66 };
67 };
68};
69
70&blsp1_i2c2 {
71 status = "okay";
72 clock-frequency = <355000>;
73
74 synaptics@2c {
75 compatible = "syna,rmi4-i2c";
76 reg = <0x2c>;
77
78 interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
79
80 #address-cells = <1>;
81 #size-cells = <0>;
82
83 vdd-supply = <&pm8941_l22>;
84 vio-supply = <&pm8941_lvs3>;
85
86 pinctrl-names = "default";
87 pinctrl-0 = <&ts_int_pin>;
88
89 syna,startup-delay-ms = <10>;
90
91 rmi4-f01@1 {
92 reg = <0x1>;
93 syna,nosleep-mode = <1>;
94 };
95
96 rmi4-f11@11 {
97 reg = <0x11>;
98 touchscreen-inverted-x;
99 syna,sensor-type = <1>;
100 };
101 };
102};
103
104&blsp1_i2c6 {
105 status = "okay";
106 clock-frequency = <355000>;
107
108 nfc@28 {
109 compatible = "nxp,pn544-i2c";
110 reg = <0x28>;
111
112 interrupt-parent = <&tlmm>;
113 interrupts = <59 IRQ_TYPE_EDGE_RISING>;
114
115 enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>;
116 firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
117 };
118};
119
120&blsp1_uart2 {
121 status = "okay";
122};
123
124&blsp2_dma {
125 qcom,controlled-remotely;
126};
127
128&blsp2_i2c5 {
129 status = "okay";
130 clock-frequency = <355000>;
131
132 /* sii8334 MHL HDMI bridge */
133};
134
135&pm8941_coincell {
136 status = "okay";
137 qcom,rset-ohms = <2100>;
138 qcom,vset-millivolts = <3000>;
139};
140
141&pm8941_gpios {
142 gpio_keys_pin_a: gpio-keys-active-state {
143 pins = "gpio2", "gpio3", "gpio4", "gpio5";
144 function = "normal";
145
146 bias-pull-up;
147 power-source = <PM8941_GPIO_S3>;
148 };
149};
150
151&pm8941_lpg {
152 status = "okay";
153
154 qcom,power-source = <1>;
155
156 multi-led {
157 color = <LED_COLOR_ID_RGB>;
158 function = LED_FUNCTION_STATUS;
159
160 #address-cells = <1>;
161 #size-cells = <0>;
162
163 led@5 {
164 reg = <5>;
165 color = <LED_COLOR_ID_BLUE>;
166 };
167
168 led@6 {
169 reg = <6>;
170 color = <LED_COLOR_ID_GREEN>;
171 };
172
173 led@7 {
174 reg = <7>;
175 color = <LED_COLOR_ID_RED>;
176 };
177 };
178};
179
180&pm8941_wled {
181 status = "okay";
182
183 qcom,cs-out;
184 qcom,current-limit = <20>;
185 qcom,current-boost-limit = <805>;
186 qcom,switching-freq = <1600>;
187 qcom,ovp = <29>;
188 qcom,num-strings = <2>;
189};
190
191&remoteproc_adsp {
192 cx-supply = <&pm8841_s2>;
193};
194
195&remoteproc_mss {
196 cx-supply = <&pm8841_s2>;
197 mss-supply = <&pm8841_s3>;
198 mx-supply = <&pm8841_s1>;
199 pll-supply = <&pm8941_l12>;
200};
201
202&rpm_requests {
203 regulators-0 {
204 compatible = "qcom,rpm-pm8841-regulators";
205
206 pm8841_s1: s1 {
207 regulator-min-microvolt = <675000>;
208 regulator-max-microvolt = <1050000>;
209 };
210
211 pm8841_s2: s2 {
212 regulator-min-microvolt = <500000>;
213 regulator-max-microvolt = <1050000>;
214 };
215
216 pm8841_s3: s3 {
217 regulator-min-microvolt = <500000>;
218 regulator-max-microvolt = <1050000>;
219 };
220
221 pm8841_s4: s4 {
222 regulator-min-microvolt = <500000>;
223 regulator-max-microvolt = <1050000>;
224 };
225 };
226
227 regulators-1 {
228 compatible = "qcom,rpm-pm8941-regulators";
229
230 vdd_l1_l3-supply = <&pm8941_s1>;
231 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
232 vdd_l4_l11-supply = <&pm8941_s1>;
233 vdd_l5_l7-supply = <&pm8941_s2>;
234 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
235 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
236 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
237 vdd_l21-supply = <&vreg_boost>;
238
239 pm8941_s1: s1 {
240 regulator-min-microvolt = <1300000>;
241 regulator-max-microvolt = <1300000>;
242 regulator-always-on;
243 regulator-boot-on;
244 };
245
246 pm8941_s2: s2 {
247 regulator-min-microvolt = <2150000>;
248 regulator-max-microvolt = <2150000>;
249 regulator-boot-on;
250 };
251
252 pm8941_s3: s3 {
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
255 regulator-always-on;
256 regulator-boot-on;
257 };
258
259 pm8941_s4: s4 {
260 regulator-min-microvolt = <5000000>;
261 regulator-max-microvolt = <5000000>;
262 };
263
264 pm8941_l1: l1 {
265 regulator-min-microvolt = <1225000>;
266 regulator-max-microvolt = <1225000>;
267 regulator-always-on;
268 regulator-boot-on;
269 };
270
271 pm8941_l2: l2 {
272 regulator-min-microvolt = <1200000>;
273 regulator-max-microvolt = <1200000>;
274 };
275
276 pm8941_l3: l3 {
277 regulator-min-microvolt = <1200000>;
278 regulator-max-microvolt = <1200000>;
279 };
280
281 pm8941_l4: l4 {
282 regulator-min-microvolt = <1225000>;
283 regulator-max-microvolt = <1225000>;
284 };
285
286 pm8941_l5: l5 {
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <1800000>;
289 };
290
291 pm8941_l6: l6 {
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <1800000>;
294 regulator-boot-on;
295 };
296
297 pm8941_l7: l7 {
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <1800000>;
300 regulator-boot-on;
301 };
302
303 pm8941_l8: l8 {
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <1800000>;
306 };
307
308 pm8941_l9: l9 {
309 regulator-min-microvolt = <1800000>;
310 regulator-max-microvolt = <2950000>;
311 };
312
313 pm8941_l11: l11 {
314 regulator-min-microvolt = <1300000>;
315 regulator-max-microvolt = <1350000>;
316 };
317
318 pm8941_l12: l12 {
319 regulator-min-microvolt = <1800000>;
320 regulator-max-microvolt = <1800000>;
321 regulator-always-on;
322 regulator-boot-on;
323 };
324
325 pm8941_l13: l13 {
326 regulator-min-microvolt = <1800000>;
327 regulator-max-microvolt = <2950000>;
328 regulator-boot-on;
329 };
330
331 pm8941_l14: l14 {
332 regulator-min-microvolt = <1800000>;
333 regulator-max-microvolt = <1800000>;
334 };
335
336 pm8941_l15: l15 {
337 regulator-min-microvolt = <2050000>;
338 regulator-max-microvolt = <2050000>;
339 };
340
341 pm8941_l16: l16 {
342 regulator-min-microvolt = <2700000>;
343 regulator-max-microvolt = <2700000>;
344 };
345
346 pm8941_l17: l17 {
347 regulator-min-microvolt = <2700000>;
348 regulator-max-microvolt = <2700000>;
349 };
350
351 pm8941_l18: l18 {
352 regulator-min-microvolt = <2850000>;
353 regulator-max-microvolt = <2850000>;
354 };
355
356 pm8941_l19: l19 {
357 regulator-min-microvolt = <3300000>;
358 regulator-max-microvolt = <3300000>;
359 };
360
361 pm8941_l20: l20 {
362 regulator-min-microvolt = <2950000>;
363 regulator-max-microvolt = <2950000>;
364 regulator-system-load = <200000>;
365 regulator-allow-set-load;
366 regulator-boot-on;
367 };
368
369 pm8941_l21: l21 {
370 regulator-min-microvolt = <2950000>;
371 regulator-max-microvolt = <2950000>;
372 regulator-boot-on;
373 };
374
375 pm8941_l22: l22 {
376 regulator-min-microvolt = <3000000>;
377 regulator-max-microvolt = <3000000>;
378 };
379
380 pm8941_l23: l23 {
381 regulator-min-microvolt = <2800000>;
382 regulator-max-microvolt = <2800000>;
383 };
384
385 pm8941_l24: l24 {
386 regulator-min-microvolt = <3075000>;
387 regulator-max-microvolt = <3075000>;
388 regulator-boot-on;
389 };
390
391 pm8941_lvs3: lvs3 {};
392 };
393};
394
395&sdhc_1 {
396 status = "okay";
397
398 vmmc-supply = <&pm8941_l20>;
399 vqmmc-supply = <&pm8941_s3>;
400
401 pinctrl-names = "default", "sleep";
402 pinctrl-0 = <&sdc1_on>;
403 pinctrl-1 = <&sdc1_off>;
404};
405
406&sdhc_2 {
407 status = "okay";
408
409 vmmc-supply = <&pm8941_l21>;
410 vqmmc-supply = <&pm8941_l13>;
411
412 cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
413
414 pinctrl-names = "default", "sleep";
415 pinctrl-0 = <&sdc2_on>;
416 pinctrl-1 = <&sdc2_off>;
417};
418
419&smbb {
420 qcom,fast-charge-safe-current = <1500000>;
421 qcom,fast-charge-current-limit = <1500000>;
422 qcom,dc-current-limit = <1800000>;
423 qcom,fast-charge-safe-voltage = <4400000>;
424 qcom,fast-charge-high-threshold-voltage = <4350000>;
425 qcom,fast-charge-low-threshold-voltage = <3400000>;
426 qcom,auto-recharge-threshold-voltage = <4200000>;
427 qcom,minimum-input-voltage = <4300000>;
428};
429
430&tlmm {
431 ts_int_pin: touch-int-state {
432 pins = "gpio61";
433 function = "gpio";
434 drive-strength = <2>;
435 bias-disable;
436 };
437
438 sdc1_on: sdc1-on-state {
439 clk-pins {
440 pins = "sdc1_clk";
441 drive-strength = <16>;
442 bias-disable;
443 };
444
445 cmd-data-pins {
446 pins = "sdc1_cmd", "sdc1_data";
447 drive-strength = <10>;
448 bias-pull-up;
449 };
450 };
451
452 sdc2_on: sdc-on-state {
453 clk-pins {
454 pins = "sdc2_clk";
455 drive-strength = <10>;
456 bias-disable;
457 };
458
459 cmd-data-pins {
460 pins = "sdc2_cmd", "sdc2_data";
461 drive-strength = <6>;
462 bias-pull-up;
463 };
464
465 cd-pins {
466 pins = "gpio62";
467 function = "gpio";
468 drive-strength = <2>;
469 bias-disable;
470 };
471 };
472};
473
474&usb {
475 status = "okay";
476
477 phys = <&usb_hs1_phy>;
478 phy-select = <&tcsr 0xb000 0>;
479 extcon = <&smbb>, <&usb_id>;
480 vbus-supply = <&chg_otg>;
481
482 hnp-disable;
483 srp-disable;
484 adp-disable;
485};
486
487&usb_hs1_phy {
488 status = "okay";
489
490 v1p8-supply = <&pm8941_l6>;
491 v3p3-supply = <&pm8941_l24>;
492
493 extcon = <&smbb>;
494 qcom,init-seq = /bits/ 8 <0x1 0x64>;
495};