blob: fd26fef7b9ae0458bc6066a40614e5f8c0184dbe [file] [log] [blame]
Ajay Bhargav3405e322011-08-04 21:26:02 +05301/*
2 * (C) Copyright 2011
3 * eInfochips Ltd. <www.einfochips.com>
Ajay Bhargav0ad0b612016-12-21 13:28:06 +05304 * Written-by: Ajay Bhargav <contact@8051projects.net>
Ajay Bhargav3405e322011-08-04 21:26:02 +05305 *
6 * Based on Aspenite:
7 * (C) Copyright 2010
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
11 *
Wolfgang Denkd79de1d2013-07-08 09:37:19 +020012 * SPDX-License-Identifier: GPL-2.0+
Ajay Bhargav3405e322011-08-04 21:26:02 +053013 */
14
15#ifndef __CONFIG_GPLUGD_H
16#define __CONFIG_GPLUGD_H
17
18/*
Ajay Bhargav3405e322011-08-04 21:26:02 +053019 * High Level Configuration Options
20 */
21#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
22#define CONFIG_ARMADA100 1 /* SOC Family Name */
23#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
Tom Rinid997f7c2017-01-25 20:42:36 -050024#define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
Ajay Bhargav3405e322011-08-04 21:26:02 +053025#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
26
Ajay Bhargav3405e322011-08-04 21:26:02 +053027/*
28 * There is no internal RAM in ARMADA100, using DRAM
29 * TBD: dcache to be used for this
30 */
31#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
32#define CONFIG_NR_DRAM_BANKS_MAX 2
33
34/*
35 * Commands configuration
36 */
Ajay Bhargav8ed2bcb2011-09-13 22:22:04 +053037
38/* Disable DCACHE */
39#define CONFIG_SYS_DCACHE_OFF
40
41/* Network configuration */
42#ifdef CONFIG_CMD_NET
Ajay Bhargav8ed2bcb2011-09-13 22:22:04 +053043#define CONFIG_ARMADA100_FEC
44
45/* DHCP Support */
Ajay Bhargav8ed2bcb2011-09-13 22:22:04 +053046#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
47#endif /* CONFIG_CMD_NET */
Ajay Bhargav3405e322011-08-04 21:26:02 +053048
Ajay Bhargav8246ae02011-09-13 22:22:13 +053049/* GPIO Support */
50#define CONFIG_MARVELL_GPIO
51
52/* PHY configuration */
53#define CONFIG_MII
Ajay Bhargav8246ae02011-09-13 22:22:13 +053054#define CONFIG_RESET_PHY_R
55/* 88E3015 register definition */
56#define PHY_LED_PAR_SEL_REG 22
57#define PHY_LED_MAN_REG 25
58#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
59/* GPIO Configuration for PHY */
60#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
61
Ajay Bhargav8bddd842011-10-03 14:00:58 +053062/* Flash Support */
Ajay Bhargav8bddd842011-10-03 14:00:58 +053063
Ajay Bhargav3405e322011-08-04 21:26:02 +053064/*
65 * mv-common.h should be defined after CMD configs since it used them
66 * to enable certain macros
67 */
68#include "mv-common.h"
Ajay Bhargav3405e322011-08-04 21:26:02 +053069
70#ifdef CONFIG_SYS_NS16550_COM1
71#undef CONFIG_SYS_NS16550_COM1
72#endif /* CONFIG_SYS_NS16550_COM1 */
73
74#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
75
76/*
77 * Environment variables configurations
78 */
Ajay Bhargavcc6880a2011-10-03 14:00:58 +053079#define CONFIG_ENV_SIZE 0x4000
Ajay Bhargavcc6880a2011-10-03 14:00:58 +053080
Ajay Bhargavfc49f272012-02-13 03:27:44 +000081#ifdef CONFIG_CMD_USB
Ajay Bhargavfc49f272012-02-13 03:27:44 +000082#define CONFIG_USB_EHCI_ARMADA100
83#define CONFIG_EHCI_IS_TDI
Ajay Bhargavfc49f272012-02-13 03:27:44 +000084#endif /* CONFIG_CMD_USB */
85
Ajay Bhargav3405e322011-08-04 21:26:02 +053086#endif /* __CONFIG_GPLUGD_H */