blob: 5cb5fa899d203cb4606fdd1f81d726a424ffcc90 [file] [log] [blame]
wdenk43c377f2002-07-20 10:56:28 +00001/*
2 * Memory Setup stuff - taken from ???
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23
wdenk43c377f2002-07-20 10:56:28 +000024#include <config.h>
25#include <version.h>
26
27
28/* some parameters for the board */
29
30SYSCON2: .long 0x80001100
31MEMCFG1: .long 0x80000180
32MEMCFG2: .long 0x800001C0
33DRFPR: .long 0x80000200
34
35syscon2_mask: .long 0x00000004
36memcfg1_val: .long 0x160c1414
37memcfg2_mask: .long 0x0000ffff @ only set lower 16 bits
38memcfg2_val: .long 0x00000000 @ upper 16 bits are reserved for CS7 + CS6
39drfpr_val: .long 0x00000081
40/* setting up the memory */
41
42.globl memsetup
43memsetup:
44 /*
45 * DRFPR
46 * 64kHz DRAM refresh
47 */
48 ldr r0, DRFPR
49 ldr r1, drfpr_val
50 str r1, [r0]
51
52 /*
53 * SYSCON2: clear bit 2, DRAM is 32 bits wide
54 */
55 ldr r0, SYSCON2
56 ldr r2, [r0]
57 ldr r1, syscon2_mask
58 bic r2, r2, r1
59 str r2, [r0]
60
61 /*
62 * MEMCFG1
63 * Setting up Keyboard at CS3, 8 Bit, 3 Waitstates
64 * Setting up CS8900 (Ethernet) at CS2, 32 Bit, 5 Waitstates
65 * Setting up flash at CS0 and CS1, 32 Bit, 3 Waitstates
66 */
67 ldr r0, MEMCFG1
68 ldr r1, memcfg1_val
69 str r1, [r0]
70
71 /*
72 * MEMCFG2
73 * Setting up ? with 0
74 *
75 */
76 ldr r0, MEMCFG2
77 ldr r2, [r0]
78 ldr r1, memcfg2_mask
79 bic r2, r2, r1
80 ldr r1, memcfg2_val
81 orr r2, r2, r1
82 str r2, [r0]
83
84 /* everything is fine now */
85 mov pc, lr