blob: de6b1838d7654e7311626463b307dc88f41ecd43 [file] [log] [blame]
Stefano Babic6ec4b952012-10-10 21:11:46 +00001/*
2 * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
3 *
4 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
5 *
6 * Configuration for the woodburn board.
7 *
Wolfgang Denkbd8ec7e2013-10-07 13:07:26 +02008 * SPDX-License-Identifier: GPL-2.0+
Stefano Babic6ec4b952012-10-10 21:11:46 +00009 */
10
11#ifndef __WOODBURN_COMMON_CONFIG_H
12#define __WOODBURN_COMMON_CONFIG_H
13
14#include <asm/arch/imx-regs.h>
15
16 /* High Level Configuration Options */
Stefano Babic6ec4b952012-10-10 21:11:46 +000017#define CONFIG_MX35
18#define CONFIG_MX35_HCLK_FREQ 24000000
Gong Qianyu52de2e52015-10-26 19:47:42 +080019#define CONFIG_SYS_FSL_CLK
Stefano Babic6ec4b952012-10-10 21:11:46 +000020
21#define CONFIG_SYS_DCACHE_OFF
Stefano Babic6ec4b952012-10-10 21:11:46 +000022
23#define CONFIG_DISPLAY_CPUINFO
24
25/* Only in case the value is not present in mach-types.h */
26#ifndef MACH_TYPE_FLEA3
27#define MACH_TYPE_FLEA3 3668
28#endif
29
30#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3
31
32/* This is required to setup the ESDC controller */
33
34#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
35#define CONFIG_REVISION_TAG
36#define CONFIG_SETUP_MEMORY_TAGS
37#define CONFIG_INITRD_TAG
38
39/*
40 * Size of malloc() pool
41 */
42#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
43
44/*
45 * Hardware drivers
46 */
trem03997412013-09-21 18:13:36 +020047#define CONFIG_SYS_I2C
48#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)eb943872015-09-21 22:43:38 +020049#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
50#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
York Sunf1a52162015-03-20 10:20:40 -070051#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
trem03997412013-09-21 18:13:36 +020052#define CONFIG_SYS_SPD_BUS_NUM 0
Stefano Babic6ec4b952012-10-10 21:11:46 +000053#define CONFIG_MXC_SPI
54#define CONFIG_MXC_GPIO
55
56/* PMIC Controller */
Stefano Babicaba29e42012-12-08 12:02:45 +010057#define CONFIG_POWER
58#define CONFIG_POWER_I2C
59#define CONFIG_POWER_FSL
Simon Glass02229812014-05-20 06:01:34 -060060#define CONFIG_POWER_FSL_MC13892
Stefano Babic6ec4b952012-10-10 21:11:46 +000061#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
62#define CONFIG_RTC_MC13XXX
63
Stefano Babic6ec4b952012-10-10 21:11:46 +000064/* mmc driver */
65#define CONFIG_MMC
66#define CONFIG_GENERIC_MMC
67#define CONFIG_FSL_ESDHC
68#define CONFIG_SYS_FSL_ESDHC_ADDR 0
69#define CONFIG_SYS_FSL_ESDHC_NUM 1
70
71/*
72 * UART (console)
73 */
74#define CONFIG_MXC_UART
75#define CONFIG_MXC_UART_BASE UART1_BASE
76
77/* allow to overwrite serial and ethaddr */
78#define CONFIG_ENV_OVERWRITE
79#define CONFIG_CONS_INDEX 1
80#define CONFIG_BAUDRATE 115200
81
82/*
83 * Command definition
84 */
Stefano Babic6ec4b952012-10-10 21:11:46 +000085#define CONFIG_CMD_DATE
Stefano Babic6ec4b952012-10-10 21:11:46 +000086#define CONFIG_BOOTP_SUBNETMASK
87#define CONFIG_BOOTP_GATEWAY
88#define CONFIG_BOOTP_DNS
89
90#define CONFIG_CMD_NAND
Stefano Babic6ec4b952012-10-10 21:11:46 +000091
Stefano Babic6ec4b952012-10-10 21:11:46 +000092#define CONFIG_DOS_PARTITION
93#define CONFIG_EFI_PARTITION
Stefano Babic6ec4b952012-10-10 21:11:46 +000094
Stefano Babic6ec4b952012-10-10 21:11:46 +000095#define CONFIG_MXC_GPIO
96
97#define CONFIG_NET_RETRY_COUNT 100
98
Stefano Babic6ec4b952012-10-10 21:11:46 +000099
100#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */
101
Stefano Babic6ec4b952012-10-10 21:11:46 +0000102/*
103 * Ethernet on SOC (FEC)
104 */
105#define CONFIG_FEC_MXC
106#define IMX_FEC_BASE FEC_BASE_ADDR
107#define CONFIG_PHYLIB
108#define CONFIG_PHY_MICREL
109#define CONFIG_FEC_MXC_PHYADDR 0x1
110
111#define CONFIG_MII
112#define CONFIG_DISCOVER_PHY
113
114#define CONFIG_ARP_TIMEOUT 200UL
115
116/*
117 * Miscellaneous configurable options
118 */
119#define CONFIG_SYS_LONGHELP /* undef to save memory */
Stefano Babic6ec4b952012-10-10 21:11:46 +0000120#define CONFIG_CMDLINE_EDITING
Stefano Babic6ec4b952012-10-10 21:11:46 +0000121
122#define CONFIG_AUTO_COMPLETE
123#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
124/* Print Buffer Size */
125#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
126#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
127#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
128
129#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
130#define CONFIG_SYS_MEMTEST_END 0x10000
131
Stefano Babic6ec4b952012-10-10 21:11:46 +0000132#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
133
Stefano Babic6ec4b952012-10-10 21:11:46 +0000134/*
135 * Stack sizes
136 *
137 * The stack sizes are set up in start.S using the settings below
138 */
139#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
140
141/*
142 * Physical Memory Map
143 */
144#define CONFIG_NR_DRAM_BANKS 1
145#define PHYS_SDRAM_1 CSD0_BASE_ADDR
146#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024)
147
148#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
149
150#define CONFIG_SYS_GBL_DATA_OFFSET (LOW_LEVEL_SRAM_STACK - \
151 IRAM_BASE_ADDR - \
152 GENERATED_GBL_DATA_SIZE)
153#define CONFIG_SYS_INIT_SP_ADDR (IRAM_BASE_ADDR + \
154 CONFIG_SYS_GBL_DATA_OFFSET)
155
156/*
157 * MTD Command for mtdparts
158 */
159#define CONFIG_CMD_MTDPARTS
160#define CONFIG_MTD_DEVICE
161#define CONFIG_FLASH_CFI_MTD
162#define CONFIG_MTD_PARTITIONS
163#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0"
164#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \
165 "32m(rootfb)," \
166 "64m(pcache)," \
167 "64m(app1)," \
168 "10m(app2),-(spool);" \
169 "physmap-flash.0:512k(u-boot),64k(env1)," \
170 "64k(env2),3776k(kernel1),3776k(kernel2)"
171
172/*
173 * FLASH and environment organization
174 */
175#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR
176#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
177#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
178/* Monitor at beginning of flash */
179#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
180#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
181
182#define CONFIG_ENV_SECT_SIZE (128 * 1024)
183#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
184
185/* Address and size of Redundant Environment Sector */
186#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
187#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
188
189#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
190 CONFIG_SYS_MONITOR_LEN)
191
192#define CONFIG_ENV_IS_IN_FLASH
193
194/*
195 * CFI FLASH driver setup
196 */
197#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
198#define CONFIG_FLASH_CFI_DRIVER
199
200/* A non-standard buffered write algorithm */
201#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */
202#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
203
204/*
205 * NAND FLASH driver setup
206 */
207#define CONFIG_NAND_MXC
208#define CONFIG_NAND_MXC_V1_1
209#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR)
210#define CONFIG_SYS_MAX_NAND_DEVICE 1
211#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR)
212#define CONFIG_MXC_NAND_HWECC
213#define CONFIG_SYS_NAND_LARGEPAGE
214
215#if 0
216#define CONFIG_MTD_DEBUG
217#define CONFIG_MTD_DEBUG_VERBOSE 7
218#endif
219#define CONFIG_SYS_NAND_ONFI_DETECTION
220
221/*
222 * Default environment and default scripts
223 * to update uboot and load kernel
224 */
Stefano Babic6ec4b952012-10-10 21:11:46 +0000225
226#define CONFIG_HOSTNAME woodburn
227#define CONFIG_EXTRA_ENV_SETTINGS \
228 "netdev=eth0\0" \
229 "nfsargs=setenv bootargs root=/dev/nfs rw " \
230 "nfsroot=${serverip}:${rootpath}\0" \
231 "ramargs=setenv bootargs root=/dev/ram rw\0" \
232 "addip_sta=setenv bootargs ${bootargs} " \
233 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
234 ":${hostname}:${netdev}:off panic=1\0" \
235 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
236 "addip=if test -n ${ipdyn};then run addip_dyn;" \
237 "else run addip_sta;fi\0" \
238 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
239 "addtty=setenv bootargs ${bootargs}" \
240 " console=ttymxc0,${baudrate}\0" \
241 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
242 "loadaddr=80800000\0" \
243 "kernel_addr_r=80800000\0" \
Anatolij Gustschinc9d1bac2014-10-24 20:13:51 +0200244 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
245 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
246 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
Stefano Babic6ec4b952012-10-10 21:11:46 +0000247 "flash_self=run ramargs addip addtty addmtd addmisc;" \
248 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
249 "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
250 "bootm ${kernel_addr}\0" \
251 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
252 "run nfsargs addip addtty addmtd addmisc;" \
253 "bootm ${kernel_addr_r}\0" \
254 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
255 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
256 "net_self=if run net_self_load;then " \
257 "run ramargs addip addtty addmtd addmisc;" \
258 "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
259 "else echo Images not loades;fi\0" \
Anatolij Gustschinc9d1bac2014-10-24 20:13:51 +0200260 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
Stefano Babic6ec4b952012-10-10 21:11:46 +0000261 "load=tftp ${loadaddr} ${u-boot}\0" \
Anatolij Gustschinc9d1bac2014-10-24 20:13:51 +0200262 "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
Stefano Babic6ec4b952012-10-10 21:11:46 +0000263 "update=protect off ${uboot_addr} +80000;" \
264 "erase ${uboot_addr} +80000;" \
265 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
266 "upd=if run load;then echo Updating u-boot;if run update;" \
267 "then echo U-Boot updated;" \
268 "else echo Error updating u-boot !;" \
269 "echo Board without bootloader !!;" \
270 "fi;" \
271 "else echo U-Boot not downloaded..exiting;fi\0" \
272 "bootcmd=run net_nfs\0"
273
274#endif /* __CONFIG_H */