blob: 98476cdf304dbb9e82700ddf088c5ca46cf04c9c [file] [log] [blame]
Christophe Leroy069fa832017-07-06 10:23:22 +02001/*
2 * MPC8xx Communication Processor Module.
3 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
4 *
5 * (C) Copyright 2000-2006
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 *
8 * This file contains structures and information for the communication
9 * processor channels. Some CPM control and status is available
Christophe Leroy48f896d2017-07-06 10:33:17 +020010 * through the MPC8xx internal memory map. See immap.h for details.
Christophe Leroy069fa832017-07-06 10:23:22 +020011 * This file only contains what I need for the moment, not the total
12 * CPM capabilities. I (or someone else) will add definitions as they
13 * are needed. -- Dan
14 *
15 */
16#ifndef __CPM_8XX__
17#define __CPM_8XX__
18
Christophe Leroyb3510fb2018-03-16 17:20:41 +010019#include <asm/immap_8xx.h>
Christophe Leroy069fa832017-07-06 10:23:22 +020020
21/* CPM Command register.
22*/
23#define CPM_CR_RST ((ushort)0x8000)
24#define CPM_CR_OPCODE ((ushort)0x0f00)
25#define CPM_CR_CHAN ((ushort)0x00f0)
26#define CPM_CR_FLG ((ushort)0x0001)
27
28/* Some commands (there are more...later)
29*/
30#define CPM_CR_INIT_TRX ((ushort)0x0000)
31#define CPM_CR_INIT_RX ((ushort)0x0001)
32#define CPM_CR_INIT_TX ((ushort)0x0002)
33#define CPM_CR_HUNT_MODE ((ushort)0x0003)
34#define CPM_CR_STOP_TX ((ushort)0x0004)
35#define CPM_CR_RESTART_TX ((ushort)0x0006)
36#define CPM_CR_SET_GADDR ((ushort)0x0008)
37
38/* Channel numbers.
39*/
40#define CPM_CR_CH_SCC1 ((ushort)0x0000)
41#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
42#define CPM_CR_CH_SCC2 ((ushort)0x0004)
43#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI/IDMA2/Timers */
44#define CPM_CR_CH_SCC3 ((ushort)0x0008)
45#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
46#define CPM_CR_CH_SCC4 ((ushort)0x000c)
47#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
48
49#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
50
51/*
52 * DPRAM defines and allocation functions
53 */
Christophe Leroye65975f2023-05-04 10:20:35 +020054#define CPM_SERIAL_BASE 0x0800
55#define CPM_I2C_BASE 0x0820
56#define CPM_SPI_BASE 0x0840
57#define CPM_FEC_BASE 0x0860
58#define CPM_SERIAL2_BASE 0x08E0
59#define CPM_SCC_BASE 0x0900
60#define CPM_POST_BASE 0x0980
61#define CPM_WLKBD_BASE 0x0a00
Christophe Leroy069fa832017-07-06 10:23:22 +020062
63#define BD_IIC_START ((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
64
65/* Export the base address of the communication processor registers
66 * and dual port ram.
67 */
68extern cpm8xx_t *cpmp; /* Pointer to comm processor */
69
70/* Buffer descriptors used by many of the CPM protocols.
71*/
72typedef struct cpm_buf_desc {
73 ushort cbd_sc; /* Status and Control */
74 ushort cbd_datlen; /* Data length in buffer */
75 uint cbd_bufaddr; /* Buffer address in host memory */
76} cbd_t;
77
78#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
79#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
80#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
81#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
82#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
83#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
Christophe Leroy48f896d2017-07-06 10:33:17 +020084#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */
Christophe Leroy069fa832017-07-06 10:23:22 +020085#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
86#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
87#define BD_SC_BR ((ushort)0x0020) /* Break received */
88#define BD_SC_FR ((ushort)0x0010) /* Framing error */
89#define BD_SC_PR ((ushort)0x0008) /* Parity error */
90#define BD_SC_OV ((ushort)0x0002) /* Overrun */
91#define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */
92
93/* Parameter RAM offsets.
94*/
Christophe Leroye6050cc2023-05-03 10:31:19 +020095#define PROFF_SCC1 ((uint)0x1c00)
96#define PROFF_IIC ((uint)0x1c80)
97#define PROFF_REVNUM ((uint)0x1cb0)
98#define PROFF_SCC2 ((uint)0x1d00)
99#define PROFF_SPI ((uint)0x1d80)
100#define PROFF_SCC3 ((uint)0x1e00)
101#define PROFF_SMC1 ((uint)0x1e80)
102#define PROFF_SCC4 ((uint)0x1f00)
103#define PROFF_SMC2 ((uint)0x1f80)
Christophe Leroy069fa832017-07-06 10:23:22 +0200104
105/* Define enough so I can at least use the serial port as a UART.
106 */
107typedef struct smc_uart {
108 ushort smc_rbase; /* Rx Buffer descriptor base address */
109 ushort smc_tbase; /* Tx Buffer descriptor base address */
110 u_char smc_rfcr; /* Rx function code */
111 u_char smc_tfcr; /* Tx function code */
112 ushort smc_mrblr; /* Max receive buffer length */
113 uint smc_rstate; /* Internal */
114 uint smc_idp; /* Internal */
115 ushort smc_rbptr; /* Internal */
116 ushort smc_ibc; /* Internal */
117 uint smc_rxtmp; /* Internal */
118 uint smc_tstate; /* Internal */
119 uint smc_tdp; /* Internal */
120 ushort smc_tbptr; /* Internal */
121 ushort smc_tbc; /* Internal */
122 uint smc_txtmp; /* Internal */
123 ushort smc_maxidl; /* Maximum idle characters */
124 ushort smc_tmpidl; /* Temporary idle counter */
125 ushort smc_brklen; /* Last received break length */
126 ushort smc_brkec; /* rcv'd break condition counter */
127 ushort smc_brkcr; /* xmt break count register */
128 ushort smc_rmask; /* Temporary bit mask */
129 u_char res1[8];
130 ushort smc_rpbase; /* Relocation pointer */
131} smc_uart_t;
132
133/* Function code bits.
134*/
135#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
136
137/* SMC uart mode register.
138*/
139#define SMCMR_REN ((ushort)0x0001)
140#define SMCMR_TEN ((ushort)0x0002)
141#define SMCMR_DM ((ushort)0x000c)
142#define SMCMR_SM_GCI ((ushort)0x0000)
143#define SMCMR_SM_UART ((ushort)0x0020)
144#define SMCMR_SM_TRANS ((ushort)0x0030)
145#define SMCMR_SM_MASK ((ushort)0x0030)
146#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
147#define SMCMR_REVD SMCMR_PM_EVEN
148#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
149#define SMCMR_BS SMCMR_PEN
150#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
151#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
152#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
153
154/* SMC2 as Centronics parallel printer. It is half duplex, in that
155 * it can only receive or transmit. The parameter ram values for
156 * each direction are either unique or properly overlap, so we can
157 * include them in one structure.
158 */
159typedef struct smc_centronics {
160 ushort scent_rbase;
161 ushort scent_tbase;
162 u_char scent_cfcr;
163 u_char scent_smask;
164 ushort scent_mrblr;
165 uint scent_rstate;
166 uint scent_r_ptr;
167 ushort scent_rbptr;
168 ushort scent_r_cnt;
169 uint scent_rtemp;
170 uint scent_tstate;
171 uint scent_t_ptr;
172 ushort scent_tbptr;
173 ushort scent_t_cnt;
174 uint scent_ttemp;
175 ushort scent_max_sl;
176 ushort scent_sl_cnt;
177 ushort scent_character1;
178 ushort scent_character2;
179 ushort scent_character3;
180 ushort scent_character4;
181 ushort scent_character5;
182 ushort scent_character6;
183 ushort scent_character7;
184 ushort scent_character8;
185 ushort scent_rccm;
186 ushort scent_rccr;
187} smc_cent_t;
188
189/* Centronics Status Mask Register.
190*/
191#define SMC_CENT_F ((u_char)0x08)
192#define SMC_CENT_PE ((u_char)0x04)
193#define SMC_CENT_S ((u_char)0x02)
194
195/* SMC Event and Mask register.
196*/
197#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
198#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
199#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
200#define SMCM_BSY ((unsigned char)0x04)
201#define SMCM_TX ((unsigned char)0x02)
202#define SMCM_RX ((unsigned char)0x01)
203
204/* Baud rate generators.
205*/
206#define CPM_BRG_RST ((uint)0x00020000)
207#define CPM_BRG_EN ((uint)0x00010000)
208#define CPM_BRG_EXTC_INT ((uint)0x00000000)
209#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
210#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
211#define CPM_BRG_ATB ((uint)0x00002000)
212#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
213#define CPM_BRG_DIV16 ((uint)0x00000001)
214
215/* SI Clock Route Register
216*/
217#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
218#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
219#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
220#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
221#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
222#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
223#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
224#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
225
226/* SCCs.
227*/
228#define SCC_GSMRH_IRP ((uint)0x00040000)
229#define SCC_GSMRH_GDE ((uint)0x00010000)
230#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
231#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
232#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
233#define SCC_GSMRH_REVD ((uint)0x00002000)
234#define SCC_GSMRH_TRX ((uint)0x00001000)
235#define SCC_GSMRH_TTX ((uint)0x00000800)
236#define SCC_GSMRH_CDP ((uint)0x00000400)
237#define SCC_GSMRH_CTSP ((uint)0x00000200)
238#define SCC_GSMRH_CDS ((uint)0x00000100)
239#define SCC_GSMRH_CTSS ((uint)0x00000080)
240#define SCC_GSMRH_TFL ((uint)0x00000040)
241#define SCC_GSMRH_RFW ((uint)0x00000020)
242#define SCC_GSMRH_TXSY ((uint)0x00000010)
243#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
244#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
245#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
246#define SCC_GSMRH_RTSM ((uint)0x00000002)
247#define SCC_GSMRH_RSYN ((uint)0x00000001)
248
249#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
250#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
251#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
252#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
253#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
254#define SCC_GSMRL_TCI ((uint)0x10000000)
255#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
256#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
257#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
258#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
259#define SCC_GSMRL_RINV ((uint)0x02000000)
260#define SCC_GSMRL_TINV ((uint)0x01000000)
261#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
262#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
263#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
264#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
265#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
266#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
267#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
268#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
269#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
270#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
271#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
272#define SCC_GSMRL_TEND ((uint)0x00040000)
273#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
274#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
275#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
276#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
277#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
278#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
279#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
280#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
281#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
282#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
283#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
284#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
285#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
286#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
287#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
288#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
289#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
290#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
291#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
292#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
293#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
294#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
295#define SCC_GSMRL_ENR ((uint)0x00000020)
296#define SCC_GSMRL_ENT ((uint)0x00000010)
297#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
298#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
299#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
300#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
301#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
302#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
303#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
304#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
305#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
306#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
307
308#define SCC_TODR_TOD ((ushort)0x8000)
309
310/* SCC Event and Mask register.
311*/
312#define SCCM_TXE ((unsigned char)0x10)
313#define SCCM_BSY ((unsigned char)0x04)
314#define SCCM_TX ((unsigned char)0x02)
315#define SCCM_RX ((unsigned char)0x01)
316
317typedef struct scc_param {
318 ushort scc_rbase; /* Rx Buffer descriptor base address */
319 ushort scc_tbase; /* Tx Buffer descriptor base address */
320 u_char scc_rfcr; /* Rx function code */
321 u_char scc_tfcr; /* Tx function code */
322 ushort scc_mrblr; /* Max receive buffer length */
323 uint scc_rstate; /* Internal */
324 uint scc_idp; /* Internal */
325 ushort scc_rbptr; /* Internal */
326 ushort scc_ibc; /* Internal */
327 uint scc_rxtmp; /* Internal */
328 uint scc_tstate; /* Internal */
329 uint scc_tdp; /* Internal */
330 ushort scc_tbptr; /* Internal */
331 ushort scc_tbc; /* Internal */
332 uint scc_txtmp; /* Internal */
333 uint scc_rcrc; /* Internal */
334 uint scc_tcrc; /* Internal */
335} sccp_t;
336
337/* Function code bits.
338*/
339#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
340
341/* CPM Ethernet through SCCx.
342 */
343typedef struct scc_enet {
344 sccp_t sen_genscc;
345 uint sen_cpres; /* Preset CRC */
346 uint sen_cmask; /* Constant mask for CRC */
347 uint sen_crcec; /* CRC Error counter */
348 uint sen_alec; /* alignment error counter */
349 uint sen_disfc; /* discard frame counter */
350 ushort sen_pads; /* Tx short frame pad character */
351 ushort sen_retlim; /* Retry limit threshold */
352 ushort sen_retcnt; /* Retry limit counter */
353 ushort sen_maxflr; /* maximum frame length register */
354 ushort sen_minflr; /* minimum frame length register */
355 ushort sen_maxd1; /* maximum DMA1 length */
356 ushort sen_maxd2; /* maximum DMA2 length */
357 ushort sen_maxd; /* Rx max DMA */
358 ushort sen_dmacnt; /* Rx DMA counter */
359 ushort sen_maxb; /* Max BD byte count */
360 ushort sen_gaddr1; /* Group address filter */
361 ushort sen_gaddr2;
362 ushort sen_gaddr3;
363 ushort sen_gaddr4;
364 uint sen_tbuf0data0; /* Save area 0 - current frame */
365 uint sen_tbuf0data1; /* Save area 1 - current frame */
366 uint sen_tbuf0rba; /* Internal */
367 uint sen_tbuf0crc; /* Internal */
368 ushort sen_tbuf0bcnt; /* Internal */
369 ushort sen_paddrh; /* physical address (MSB) */
370 ushort sen_paddrm;
371 ushort sen_paddrl; /* physical address (LSB) */
372 ushort sen_pper; /* persistence */
373 ushort sen_rfbdptr; /* Rx first BD pointer */
374 ushort sen_tfbdptr; /* Tx first BD pointer */
375 ushort sen_tlbdptr; /* Tx last BD pointer */
376 uint sen_tbuf1data0; /* Save area 0 - current frame */
377 uint sen_tbuf1data1; /* Save area 1 - current frame */
378 uint sen_tbuf1rba; /* Internal */
379 uint sen_tbuf1crc; /* Internal */
380 ushort sen_tbuf1bcnt; /* Internal */
381 ushort sen_txlen; /* Tx Frame length counter */
382 ushort sen_iaddr1; /* Individual address filter */
383 ushort sen_iaddr2;
384 ushort sen_iaddr3;
385 ushort sen_iaddr4;
386 ushort sen_boffcnt; /* Backoff counter */
387
388 /* NOTE: Some versions of the manual have the following items
389 * incorrectly documented. Below is the proper order.
390 */
391 ushort sen_taddrh; /* temp address (MSB) */
392 ushort sen_taddrm;
393 ushort sen_taddrl; /* temp address (LSB) */
394} scc_enet_t;
395
396/*********************************************************************/
397
398/* SCC Event register as used by Ethernet.
399*/
400#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
401#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
402#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
403#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
404#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
405#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
406
407/* SCC Mode Register (PSMR) as used by Ethernet.
408*/
409#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
410#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
411#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
412#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
413#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
414#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
415#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
416#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
417#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
418#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
419#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
420#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
421#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
422
423/* Buffer descriptor control/status used by Ethernet receive.
424*/
425#define BD_ENET_RX_EMPTY ((ushort)0x8000)
426#define BD_ENET_RX_WRAP ((ushort)0x2000)
427#define BD_ENET_RX_INTR ((ushort)0x1000)
428#define BD_ENET_RX_LAST ((ushort)0x0800)
429#define BD_ENET_RX_FIRST ((ushort)0x0400)
430#define BD_ENET_RX_MISS ((ushort)0x0100)
431#define BD_ENET_RX_LG ((ushort)0x0020)
432#define BD_ENET_RX_NO ((ushort)0x0010)
433#define BD_ENET_RX_SH ((ushort)0x0008)
434#define BD_ENET_RX_CR ((ushort)0x0004)
435#define BD_ENET_RX_OV ((ushort)0x0002)
436#define BD_ENET_RX_CL ((ushort)0x0001)
437#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
438
439/* Buffer descriptor control/status used by Ethernet transmit.
440*/
441#define BD_ENET_TX_READY ((ushort)0x8000)
442#define BD_ENET_TX_PAD ((ushort)0x4000)
443#define BD_ENET_TX_WRAP ((ushort)0x2000)
444#define BD_ENET_TX_INTR ((ushort)0x1000)
445#define BD_ENET_TX_LAST ((ushort)0x0800)
446#define BD_ENET_TX_TC ((ushort)0x0400)
447#define BD_ENET_TX_DEF ((ushort)0x0200)
448#define BD_ENET_TX_HB ((ushort)0x0100)
449#define BD_ENET_TX_LC ((ushort)0x0080)
450#define BD_ENET_TX_RL ((ushort)0x0040)
451#define BD_ENET_TX_RCMASK ((ushort)0x003c)
452#define BD_ENET_TX_UN ((ushort)0x0002)
453#define BD_ENET_TX_CSL ((ushort)0x0001)
454#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
455
456/* SCC as UART
457*/
458typedef struct scc_uart {
459 sccp_t scc_genscc;
460 uint scc_res1; /* Reserved */
461 uint scc_res2; /* Reserved */
462 ushort scc_maxidl; /* Maximum idle chars */
463 ushort scc_idlc; /* temp idle counter */
464 ushort scc_brkcr; /* Break count register */
465 ushort scc_parec; /* receive parity error counter */
466 ushort scc_frmec; /* receive framing error counter */
467 ushort scc_nosec; /* receive noise counter */
468 ushort scc_brkec; /* receive break condition counter */
469 ushort scc_brkln; /* last received break length */
470 ushort scc_uaddr1; /* UART address character 1 */
471 ushort scc_uaddr2; /* UART address character 2 */
472 ushort scc_rtemp; /* Temp storage */
473 ushort scc_toseq; /* Transmit out of sequence char */
474 ushort scc_char1; /* control character 1 */
475 ushort scc_char2; /* control character 2 */
476 ushort scc_char3; /* control character 3 */
477 ushort scc_char4; /* control character 4 */
478 ushort scc_char5; /* control character 5 */
479 ushort scc_char6; /* control character 6 */
480 ushort scc_char7; /* control character 7 */
481 ushort scc_char8; /* control character 8 */
482 ushort scc_rccm; /* receive control character mask */
483 ushort scc_rccr; /* receive control character register */
484 ushort scc_rlbc; /* receive last break character */
485} scc_uart_t;
486
487/* SCC Event and Mask registers when it is used as a UART.
488*/
489#define UART_SCCM_GLR ((ushort)0x1000)
490#define UART_SCCM_GLT ((ushort)0x0800)
491#define UART_SCCM_AB ((ushort)0x0200)
492#define UART_SCCM_IDL ((ushort)0x0100)
493#define UART_SCCM_GRA ((ushort)0x0080)
494#define UART_SCCM_BRKE ((ushort)0x0040)
495#define UART_SCCM_BRKS ((ushort)0x0020)
496#define UART_SCCM_CCR ((ushort)0x0008)
497#define UART_SCCM_BSY ((ushort)0x0004)
498#define UART_SCCM_TX ((ushort)0x0002)
499#define UART_SCCM_RX ((ushort)0x0001)
500
501/* The SCC PSMR when used as a UART.
502*/
503#define SCU_PSMR_FLC ((ushort)0x8000)
504#define SCU_PSMR_SL ((ushort)0x4000)
505#define SCU_PSMR_CL ((ushort)0x3000)
506#define SCU_PSMR_UM ((ushort)0x0c00)
507#define SCU_PSMR_FRZ ((ushort)0x0200)
508#define SCU_PSMR_RZS ((ushort)0x0100)
509#define SCU_PSMR_SYN ((ushort)0x0080)
510#define SCU_PSMR_DRT ((ushort)0x0040)
511#define SCU_PSMR_PEN ((ushort)0x0010)
512#define SCU_PSMR_RPM ((ushort)0x000c)
513#define SCU_PSMR_REVP ((ushort)0x0008)
514#define SCU_PSMR_TPM ((ushort)0x0003)
515#define SCU_PSMR_TEVP ((ushort)0x0003)
516
517/* CPM Transparent mode SCC.
518 */
519typedef struct scc_trans {
520 sccp_t st_genscc;
521 uint st_cpres; /* Preset CRC */
522 uint st_cmask; /* Constant mask for CRC */
523} scc_trans_t;
524
525#define BD_SCC_TX_LAST ((ushort)0x0800)
526
527/* IIC parameter RAM.
528*/
529typedef struct iic {
530 ushort iic_rbase; /* Rx Buffer descriptor base address */
531 ushort iic_tbase; /* Tx Buffer descriptor base address */
532 u_char iic_rfcr; /* Rx function code */
533 u_char iic_tfcr; /* Tx function code */
534 ushort iic_mrblr; /* Max receive buffer length */
535 uint iic_rstate; /* Internal */
536 uint iic_rdp; /* Internal */
537 ushort iic_rbptr; /* Internal */
538 ushort iic_rbc; /* Internal */
539 uint iic_rxtmp; /* Internal */
540 uint iic_tstate; /* Internal */
541 uint iic_tdp; /* Internal */
542 ushort iic_tbptr; /* Internal */
543 ushort iic_tbc; /* Internal */
544 uint iic_txtmp; /* Internal */
545 uint iic_res; /* reserved */
546 ushort iic_rpbase; /* Relocation pointer */
547 ushort iic_res2; /* reserved */
548} iic_t;
549
550/* SPI parameter RAM.
551*/
552typedef struct spi {
553 ushort spi_rbase; /* Rx Buffer descriptor base address */
554 ushort spi_tbase; /* Tx Buffer descriptor base address */
555 u_char spi_rfcr; /* Rx function code */
556 u_char spi_tfcr; /* Tx function code */
557 ushort spi_mrblr; /* Max receive buffer length */
558 uint spi_rstate; /* Internal */
559 uint spi_rdp; /* Internal */
560 ushort spi_rbptr; /* Internal */
561 ushort spi_rbc; /* Internal */
562 uint spi_rxtmp; /* Internal */
563 uint spi_tstate; /* Internal */
564 uint spi_tdp; /* Internal */
565 ushort spi_tbptr; /* Internal */
566 ushort spi_tbc; /* Internal */
567 uint spi_txtmp; /* Internal */
568 uint spi_res;
569 ushort spi_rpbase; /* Relocation pointer */
570 ushort spi_res2;
571} spi_t;
572
573/* SPI Mode register.
574*/
575#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
576#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
577#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
578#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
579#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
580#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
581#define SPMODE_EN ((ushort)0x0100) /* Enable */
582#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
583#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
584
Christophe Leroy48f896d2017-07-06 10:33:17 +0200585#define SPMODE_LEN(x) ((((x) - 1) & 0xF) << 4)
586#define SPMODE_PM(x) ((x) & 0xF)
Christophe Leroy069fa832017-07-06 10:23:22 +0200587
588/* HDLC parameter RAM.
589*/
590
591typedef struct hdlc_pram_s {
592 /*
593 * SCC parameter RAM
594 */
595 ushort rbase; /* Rx Buffer descriptor base address */
596 ushort tbase; /* Tx Buffer descriptor base address */
597 uchar rfcr; /* Rx function code */
598 uchar tfcr; /* Tx function code */
599 ushort mrblr; /* Rx buffer length */
600 ulong rstate; /* Rx internal state */
601 ulong rptr; /* Rx internal data pointer */
602 ushort rbptr; /* rb BD Pointer */
603 ushort rcount; /* Rx internal byte count */
604 ulong rtemp; /* Rx temp */
605 ulong tstate; /* Tx internal state */
606 ulong tptr; /* Tx internal data pointer */
607 ushort tbptr; /* Tx BD pointer */
608 ushort tcount; /* Tx byte count */
609 ulong ttemp; /* Tx temp */
610 ulong rcrc; /* temp receive CRC */
611 ulong tcrc; /* temp transmit CRC */
612 /*
613 * HDLC specific parameter RAM
614 */
615 uchar res[4]; /* reserved */
616 ulong c_mask; /* CRC constant */
617 ulong c_pres; /* CRC preset */
618 ushort disfc; /* discarded frame counter */
619 ushort crcec; /* CRC error counter */
620 ushort abtsc; /* abort sequence counter */
621 ushort nmarc; /* nonmatching address rx cnt */
622 ushort retrc; /* frame retransmission cnt */
623 ushort mflr; /* maximum frame length reg */
624 ushort max_cnt; /* maximum length counter */
625 ushort rfthr; /* received frames threshold */
626 ushort rfcnt; /* received frames count */
627 ushort hmask; /* user defined frm addr mask */
628 ushort haddr1; /* user defined frm address 1 */
629 ushort haddr2; /* user defined frm address 2 */
630 ushort haddr3; /* user defined frm address 3 */
631 ushort haddr4; /* user defined frm address 4 */
632 ushort tmp; /* temp */
633 ushort tmp_mb; /* temp */
634} hdlc_pram_t;
635
636/* CPM interrupts. There are nearly 32 interrupts generated by CPM
637 * channels or devices. All of these are presented to the PPC core
638 * as a single interrupt. The CPM interrupt handler dispatches its
639 * own handlers, in a similar fashion to the PPC core handler. We
640 * use the table as defined in the manuals (i.e. no special high
641 * priority and SCC1 == SCCa, etc...).
642 */
643#define CPMVEC_NR 32
644#define CPMVEC_OFFSET 0x00010000
645#define CPMVEC_PIO_PC15 ((ushort)0x1f | CPMVEC_OFFSET)
646#define CPMVEC_SCC1 ((ushort)0x1e | CPMVEC_OFFSET)
647#define CPMVEC_SCC2 ((ushort)0x1d | CPMVEC_OFFSET)
648#define CPMVEC_SCC3 ((ushort)0x1c | CPMVEC_OFFSET)
649#define CPMVEC_SCC4 ((ushort)0x1b | CPMVEC_OFFSET)
650#define CPMVEC_PIO_PC14 ((ushort)0x1a | CPMVEC_OFFSET)
651#define CPMVEC_TIMER1 ((ushort)0x19 | CPMVEC_OFFSET)
652#define CPMVEC_PIO_PC13 ((ushort)0x18 | CPMVEC_OFFSET)
653#define CPMVEC_PIO_PC12 ((ushort)0x17 | CPMVEC_OFFSET)
654#define CPMVEC_SDMA_CB_ERR ((ushort)0x16 | CPMVEC_OFFSET)
655#define CPMVEC_IDMA1 ((ushort)0x15 | CPMVEC_OFFSET)
656#define CPMVEC_IDMA2 ((ushort)0x14 | CPMVEC_OFFSET)
657#define CPMVEC_TIMER2 ((ushort)0x12 | CPMVEC_OFFSET)
658#define CPMVEC_RISCTIMER ((ushort)0x11 | CPMVEC_OFFSET)
659#define CPMVEC_I2C ((ushort)0x10 | CPMVEC_OFFSET)
660#define CPMVEC_PIO_PC11 ((ushort)0x0f | CPMVEC_OFFSET)
661#define CPMVEC_PIO_PC10 ((ushort)0x0e | CPMVEC_OFFSET)
662#define CPMVEC_TIMER3 ((ushort)0x0c | CPMVEC_OFFSET)
663#define CPMVEC_PIO_PC9 ((ushort)0x0b | CPMVEC_OFFSET)
664#define CPMVEC_PIO_PC8 ((ushort)0x0a | CPMVEC_OFFSET)
665#define CPMVEC_PIO_PC7 ((ushort)0x09 | CPMVEC_OFFSET)
666#define CPMVEC_TIMER4 ((ushort)0x07 | CPMVEC_OFFSET)
667#define CPMVEC_PIO_PC6 ((ushort)0x06 | CPMVEC_OFFSET)
668#define CPMVEC_SPI ((ushort)0x05 | CPMVEC_OFFSET)
669#define CPMVEC_SMC1 ((ushort)0x04 | CPMVEC_OFFSET)
670#define CPMVEC_SMC2 ((ushort)0x03 | CPMVEC_OFFSET)
671#define CPMVEC_PIO_PC5 ((ushort)0x02 | CPMVEC_OFFSET)
672#define CPMVEC_PIO_PC4 ((ushort)0x01 | CPMVEC_OFFSET)
673#define CPMVEC_ERROR ((ushort)0x00 | CPMVEC_OFFSET)
674
Christophe Leroy48f896d2017-07-06 10:33:17 +0200675void irq_install_handler(int vec, void (*handler)(void *), void *dev_id);
Christophe Leroy069fa832017-07-06 10:23:22 +0200676
677/* CPM interrupt configuration vector.
678*/
679#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
680#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
681#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
682#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
Christophe Leroy48f896d2017-07-06 10:33:17 +0200683#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
Christophe Leroy069fa832017-07-06 10:23:22 +0200684#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
685#define CICR_IEN ((uint)0x00000080) /* Int. enable */
686#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
Christophe Leroyd8f34da2023-05-03 08:50:55 +0200687
688#ifdef CONFIG_NO_UCODE_PATCH
689static inline void cpm_load_patch(cpm8xx_t __iomem *cp) { }
690#else
691void cpm_load_patch(cpm8xx_t __iomem *cp);
692#endif
693
Christophe Leroy069fa832017-07-06 10:23:22 +0200694#endif /* __CPM_8XX__ */