Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / f16518e3edbdeb10bef4be0d4df2803dc8ea2105 / . / include / configs / colibri_imx7.h
blob: 2ec392e4b14ec08258ee6b38de5fd59686ccfb2c [file] [log] [blame]
Stefan Agner41f75bb2016-07-20 21:27:49 -0700[diff] [blame]1/*
2 * Copyright 2016 Toradex AG
3 *
4 * Configuration settings for the Colibri iMX7 module.
5 *
6 * based on mx7dsabresd.h:
7 * Copyright (C) 2015 Freescale Semiconductor, Inc.
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#ifndef __COLIBRI_IMX7_CONFIG_H
13#define __COLIBRI_IMX7_CONFIG_H
14
15#include "mx7_common.h"
16
17#define CONFIG_SYS_THUMB_BUILD
18#define CONFIG_USE_ARCH_MEMCPY
19#define CONFIG_USE_ARCH_MEMSET
20
21/*#define CONFIG_DBG_MONITOR*/
22#define PHYS_SDRAM_SIZE SZ_512M
23
24#define CONFIG_BOARD_EARLY_INIT_F
25#define CONFIG_BOARD_LATE_INIT
26
27#define CONFIG_DISPLAY_BOARDINFO_LATE
28
29/* Size of malloc() pool */
30#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
31
32/* Uncomment to enable secure boot support */
33/* #define CONFIG_SECURE_BOOT */
34#define CONFIG_CSF_SIZE 0x4000
35
36#define CONFIG_CMD_BMODE
37
38/* Network */
39#define CONFIG_FEC_MXC
40#define CONFIG_MII
41#define CONFIG_FEC_XCV_TYPE RMII
42#define CONFIG_ETHPRIME "FEC"
43#define CONFIG_FEC_MXC_PHYADDR 0
44
45#define CONFIG_PHYLIB
46#define CONFIG_PHY_MICREL
47#define CONFIG_TFTP_TSIZE
48#define CONFIG_IP_DEFRAG
49#define CONFIG_TFTP_BLOCKSIZE 16384
50
51/* ENET1 */
52#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
53
54/* MMC Config*/
55#define CONFIG_SYS_FSL_ESDHC_ADDR 0
56#define CONFIG_SYS_FSL_USDHC_NUM 1
57
58#undef CONFIG_BOOTM_PLAN9
59#undef CONFIG_BOOTM_RTEMS
60
61/* I2C configs */
62#define CONFIG_SYS_I2C
63#define CONFIG_SYS_I2C_MXC
64#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
65#define CONFIG_SYS_I2C_SPEED 100000
66
67#define CONFIG_IPADDR 192.168.10.2
68#define CONFIG_NETMASK 255.255.255.0
69#define CONFIG_SERVERIP 192.168.10.1
70
71#define MEM_LAYOUT_ENV_SETTINGS \
72 "fdt_addr_r=0x82000000\0" \
73 "fdt_high=0xffffffff\0" \
74 "initrd_high=0xffffffff\0" \
75 "kernel_addr_r=0x81000000\0" \
76 "ramdisk_addr_r=0x82100000\0"
77
78#define SD_BOOTCMD \
79 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
80 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
81 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
82 "run m4boot && " \
83 "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
84 "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
85 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
86
87#define NFS_BOOTCMD \
88 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
89 "nfsboot=run setup; " \
90 "setenv bootargs ${defargs} ${nfsargs} " \
91 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
92 "dhcp ${kernel_addr_r} && " \
93 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
94 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
95
96#define UBI_BOOTCMD \
97 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
98 "ubi.fm_autoconvert=1\0" \
99 "ubiboot=run setup; " \
100 "setenv bootargs ${defargs} ${ubiargs} " \
101 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
102 "ubi part ubi && run m4boot && " \
103 "ubi read ${kernel_addr_r} kernel && " \
104 "ubi read ${fdt_addr_r} dtb && " \
105 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
106
107#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
108
109#define CONFIG_EXTRA_ENV_SETTINGS \
110 MEM_LAYOUT_ENV_SETTINGS \
111 NFS_BOOTCMD \
112 SD_BOOTCMD \
113 UBI_BOOTCMD \
114 "console=ttymxc0\0" \
115 "defargs=\0" \
116 "fdt_board=eval-v3\0" \
117 "fdt_fixup=;\0" \
118 "m4boot=;\0" \
119 "ip_dyn=yes\0" \
120 "kernel_file=zImage\0" \
121 "mtdparts=" MTDPARTS_DEFAULT "\0" \
122 "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
123 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
124 "${board}/flash_eth.img && source ${loadaddr}\0" \
125 "setsdupdate=mmc rescan && setenv interface mmc && " \
126 "fatload ${interface} 0:1 ${loadaddr} " \
127 "${board}/flash_blk.img && source ${loadaddr}\0" \
128 "setup=setenv setupargs " \
129 "console=tty1 console=${console}" \
130 ",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
131 "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
132 "setusbupdate=usb start && setenv interface usb && " \
133 "fatload ${interface} 0:1 ${loadaddr} " \
134 "${board}/flash_blk.img && source ${loadaddr}\0" \
135 "splashpos=m,m\0" \
136 "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
137
138/* Miscellaneous configurable options */
139#define CONFIG_SYS_LONGHELP
140
141#define CONFIG_SYS_MEMTEST_START 0x80000000
142#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)
143
144#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
145#define CONFIG_SYS_HZ 1000
146
147#define CONFIG_STACKSIZE SZ_128K
148
149/* Physical Memory Map */
150#define CONFIG_NR_DRAM_BANKS 1
151#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
152
153#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
154#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
155#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
156
157#define CONFIG_SYS_INIT_SP_OFFSET \
158 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
159#define CONFIG_SYS_INIT_SP_ADDR \
160 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
161
162/* FLASH and environment organization */
163#define CONFIG_SYS_NO_FLASH
164#define CONFIG_ENV_IS_IN_NAND
165
166#if defined(CONFIG_ENV_IS_IN_MMC)
167#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
168#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
169#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
170#define CONFIG_ENV_OFFSET (8 * SZ_64K)
171#elif defined(CONFIG_ENV_IS_IN_NAND)
172#define CONFIG_ENV_OFFSET (4 * 1024 * 1024)
173#define CONFIG_ENV_SECT_SIZE (128 * 1024)
174#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
175#endif
176
177#define CONFIG_NAND_MXS
178#define CONFIG_CMD_NAND_TRIMFFS
179
180/* NAND stuff */
181#define CONFIG_SYS_MAX_NAND_DEVICE 1
182#define CONFIG_SYS_NAND_BASE 0x40000000
183#define CONFIG_SYS_NAND_5_ADDR_CYCLE
184#define CONFIG_SYS_NAND_ONFI_DETECTION
185#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
186#define CONFIG_CMD_NAND_TORTURE
187
188/* UBI stuff */
189#define CONFIG_RBTREE
190#define CONFIG_LZO
191#define CONFIG_CMD_UBI
192#define CONFIG_MTD_UBI_FASTMAP
193#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
194
195/* Dynamic MTD partition support */
196#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
197#define CONFIG_MTD_PARTITIONS
198#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
199#define MTDIDS_DEFAULT "nand0=gpmi-nand"
200#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \
201 "512k(mx7-bcb)," \
202 "3584k(u-boot)ro," \
203 "512k(u-boot-env)," \
204 "-(ubi)"
205
206/* DMA stuff, needed for GPMI/MXS NAND support */
207#define CONFIG_APBH_DMA
208#define CONFIG_APBH_DMA_BURST
209#define CONFIG_APBH_DMA_BURST8
210
211/* USB Configs */
Stefan Agner41f75bb2016-07-20 21:27:49 -0700[diff] [blame]212#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
213
214#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
215#define CONFIG_MXC_USB_FLAGS 0
216#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
217
218#define CONFIG_IMX_THERMAL
219
220#define CONFIG_USBD_HS
221
222#define CONFIG_USB_FUNCTION_MASS_STORAGE
223
224/* USB Device Firmware Update support */
225#define CONFIG_USB_FUNCTION_DFU
226#define CONFIG_DFU_MMC
227#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
228#define DFU_DEFAULT_POLL_TIMEOUT 300
229
230#define CONFIG_VIDEO
231#ifdef CONFIG_VIDEO
232#define CONFIG_CFB_CONSOLE
233#define CONFIG_VIDEO_MXS
234#define CONFIG_VIDEO_LOGO
235#define CONFIG_VIDEO_SW_CURSOR
236#define CONFIG_VGA_AS_SINGLE_DEVICE
237#define CONFIG_SYS_CONSOLE_IS_IN_ENV
238#define CONFIG_SPLASH_SCREEN
239#define CONFIG_SPLASH_SCREEN_ALIGN
240#define CONFIG_CMD_BMP
241#define CONFIG_BMP_16BPP
242#define CONFIG_VIDEO_BMP_RLE8
243#define CONFIG_VIDEO_BMP_LOGO
244#endif
245
246#endif