| Priyanka Jain | ef76b2e | 2018-10-29 09:17:09 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| 2 | /* |
| 3 | * NXP lx2160a SOC common device tree source |
| 4 | * |
| 5 | * Copyright 2018 NXP |
| 6 | * |
| 7 | */ |
| 8 | |
| 9 | / { |
| 10 | compatible = "fsl,lx2160a"; |
| 11 | interrupt-parent = <&gic>; |
| 12 | #address-cells = <2>; |
| 13 | #size-cells = <2>; |
| 14 | |
| 15 | memory@80000000 { |
| 16 | device_type = "memory"; |
| 17 | reg = <0x00000000 0x80000000 0 0x80000000>; |
| 18 | /* DRAM space - 1, size : 2 GB DRAM */ |
| 19 | }; |
| 20 | |
| 21 | sysclk: sysclk { |
| 22 | compatible = "fixed-clock"; |
| 23 | #clock-cells = <0>; |
| 24 | clock-frequency = <100000000>; |
| 25 | clock-output-names = "sysclk"; |
| 26 | }; |
| 27 | |
| 28 | clockgen: clocking@1300000 { |
| 29 | compatible = "fsl,ls2080a-clockgen"; |
| 30 | reg = <0 0x1300000 0 0xa0000>; |
| 31 | #clock-cells = <2>; |
| 32 | clocks = <&sysclk>; |
| 33 | }; |
| 34 | |
| 35 | gic: interrupt-controller@6000000 { |
| 36 | compatible = "arm,gic-v3"; |
| 37 | reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ |
| 38 | <0x0 0x06200000 0 0x100000>; /* GICR */ |
| 39 | #interrupt-cells = <3>; |
| 40 | interrupt-controller; |
| 41 | interrupts = <1 9 0x4>; |
| 42 | }; |
| 43 | |
| 44 | timer { |
| 45 | compatible = "arm,armv8-timer"; |
| 46 | interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ |
| 47 | <1 14 0x8>, /* Physical NS PPI, active-low */ |
| 48 | <1 11 0x8>, /* Virtual PPI, active-low */ |
| 49 | <1 10 0x8>; /* Hypervisor PPI, active-low */ |
| 50 | }; |
| 51 | |
| 52 | uart0: serial@21c0000 { |
| 53 | compatible = "arm,pl011"; |
| 54 | reg = <0x0 0x21c0000 0x0 0x1000>; |
| 55 | clocks = <&clockgen 4 0>; |
| 56 | }; |
| 57 | |
| 58 | uart1: serial@21d0000 { |
| 59 | compatible = "arm,pl011"; |
| 60 | reg = <0x0 0x21d0000 0x0 0x1000>; |
| 61 | clocks = <&clockgen 4 0>; |
| 62 | }; |
| 63 | |
| 64 | uart2: serial@21e0000 { |
| 65 | compatible = "arm,pl011"; |
| 66 | reg = <0x0 0x21e0000 0x0 0x1000>; |
| 67 | clocks = <&clockgen 4 0>; |
| 68 | status = "disabled"; |
| 69 | }; |
| 70 | |
| 71 | uart3: serial@21f0000 { |
| 72 | compatible = "arm,pl011"; |
| 73 | reg = <0x0 0x21f0000 0x0 0x1000>; |
| 74 | clocks = <&clockgen 4 0>; |
| 75 | status = "disabled"; |
| 76 | }; |
| 77 | |
| 78 | dspi0: dspi@2100000 { |
| 79 | compatible = "fsl,vf610-dspi"; |
| 80 | #address-cells = <1>; |
| 81 | #size-cells = <0>; |
| 82 | reg = <0x0 0x2100000 0x0 0x10000>; |
| 83 | interrupts = <0 26 0x4>; /* Level high type */ |
| 84 | num-cs = <6>; |
| 85 | }; |
| 86 | |
| 87 | dspi1: dspi@2110000 { |
| 88 | compatible = "fsl,vf610-dspi"; |
| 89 | #address-cells = <1>; |
| 90 | #size-cells = <0>; |
| 91 | reg = <0x0 0x2110000 0x0 0x10000>; |
| 92 | interrupts = <0 240 0x4>; /* Level high type */ |
| 93 | num-cs = <6>; |
| 94 | }; |
| 95 | |
| 96 | dspi2: dspi@2120000 { |
| 97 | compatible = "fsl,vf610-dspi"; |
| 98 | #address-cells = <1>; |
| 99 | #size-cells = <0>; |
| 100 | reg = <0x0 0x2120000 0x0 0x10000>; |
| 101 | interrupts = <0 241 0x4>; /* Level high type */ |
| 102 | num-cs = <6>; |
| 103 | }; |
| 104 | |
| 105 | usb0: usb3@3100000 { |
| 106 | compatible = "fsl,layerscape-dwc3"; |
| 107 | reg = <0x0 0x3100000 0x0 0x10000>; |
| 108 | interrupts = <0 80 0x4>; /* Level high type */ |
| 109 | dr_mode = "host"; |
| 110 | }; |
| 111 | |
| 112 | usb1: usb3@3110000 { |
| 113 | compatible = "fsl,layerscape-dwc3"; |
| 114 | reg = <0x0 0x3110000 0x0 0x10000>; |
| 115 | interrupts = <0 81 0x4>; /* Level high type */ |
| 116 | dr_mode = "host"; |
| 117 | }; |
| 118 | }; |