board/esd/cpci750/sdram_init.c

/*
 * (C) Copyright 2001
 * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*************************************************************************
 * adaption for the Marvell DB64360 Board
 * Ingo Assmus (ingo.assmus@keymile.com)
 *
 * adaption for the cpci750 Board
 * Reinhard Arlt (reinhard.arlt@esd-electronics.com)
 *************************************************************************/


/* sdram_init.c - automatic memory sizing */

#include <common.h>
#include <74xx_7xx.h>
#include "../../Marvell/include/memory.h"
#include "../../Marvell/include/pci.h"
#include "../../Marvell/include/mv_gen_reg.h"
#include <net.h>

#include "eth.h"
#include "mpsc.h"
#include "../../Marvell/common/i2c.h"
#include "64360.h"
#include "mv_regs.h"


#undef	DEBUG
/* #define DEBUG */
#ifdef CONFIG_PCI
#define	MAP_PCI
#endif /* of CONFIG_PCI */

#ifdef DEBUG
#define DP(x) x
#else
#define DP(x)
#endif

int set_dfcdlInit(void);	/* setup delay line of Mv64360 */

/* ------------------------------------------------------------------------- */

int
memory_map_bank(unsigned int bankNo,
		unsigned int bankBase,
		unsigned int bankLength)
{
#ifdef MAP_PCI
	PCI_HOST host;
#endif


#ifdef DEBUG
	if (bankLength > 0) {
		printf("mapping bank %d at %08x - %08x\n",
		       bankNo, bankBase, bankBase + bankLength - 1);
	} else {
		printf("unmapping bank %d\n", bankNo);
	}
#endif

	memoryMapBank(bankNo, bankBase, bankLength);

#ifdef MAP_PCI
	for (host=PCI_HOST0;host<=PCI_HOST1;host++) {
		const int features=
			PREFETCH_ENABLE |
			DELAYED_READ_ENABLE |
			AGGRESSIVE_PREFETCH |
			READ_LINE_AGGRESSIVE_PREFETCH |
			READ_MULTI_AGGRESSIVE_PREFETCH |
			MAX_BURST_4 |
			PCI_NO_SWAP;

		pciMapMemoryBank(host, bankNo, bankBase, bankLength);

		pciSetRegionSnoopMode(host, bankNo, PCI_SNOOP_WB, bankBase,
				bankLength);

		pciSetRegionFeatures(host, bankNo, features, bankBase, bankLength);
	}
#endif
	return 0;
}

#define GB         (1 << 30)

/* much of this code is based on (or is) the code in the pip405 port */
/* thanks go to the authors of said port - Josh */

/* structure to store the relevant information about an sdram bank */
typedef struct sdram_info {
	uchar drb_size;
	uchar registered, ecc;
	uchar tpar;
	uchar tras_clocks;
	uchar burst_len;
	uchar banks, slot;
} sdram_info_t;

/* Typedefs for 'gtAuxilGetDIMMinfo' function */

typedef enum _memoryType {SDRAM, DDR} MEMORY_TYPE;

typedef enum _voltageInterface {TTL_5V_TOLERANT, LVTTL, HSTL_1_5V,
                                SSTL_3_3V, SSTL_2_5V, VOLTAGE_UNKNOWN,
                               } VOLTAGE_INTERFACE;

typedef enum _max_CL_supported_DDR {DDR_CL_1=1, DDR_CL_1_5=2, DDR_CL_2=4, DDR_CL_2_5=8, DDR_CL_3=16, DDR_CL_3_5=32, DDR_CL_FAULT} MAX_CL_SUPPORTED_DDR;
typedef enum _max_CL_supported_SD {SD_CL_1=1,  SD_CL_2,  SD_CL_3, SD_CL_4, SD_CL_5, SD_CL_6, SD_CL_7, SD_FAULT} MAX_CL_SUPPORTED_SD;


/* SDRAM/DDR information struct */
typedef struct _gtMemoryDimmInfo
{
    MEMORY_TYPE          memoryType;
    unsigned int         numOfRowAddresses;
    unsigned int         numOfColAddresses;
    unsigned int         numOfModuleBanks;
    unsigned int         dataWidth;
    VOLTAGE_INTERFACE    voltageInterface;
    unsigned int         errorCheckType;                                /* ECC , PARITY..*/
    unsigned int         sdramWidth;                                    /* 4,8,16 or 32 */;
    unsigned int         errorCheckDataWidth;                           /* 0 - no, 1 - Yes */
    unsigned int         minClkDelay;
    unsigned int         burstLengthSupported;
    unsigned int         numOfBanksOnEachDevice;
    unsigned int         suportedCasLatencies;
    unsigned int     	 RefreshInterval;
    unsigned int   	 maxCASlatencySupported_LoP;			/* LoP left of point (measured in ns) */
    unsigned int   	 maxCASlatencySupported_RoP;			/* RoP right of point (measured in ns)*/
    MAX_CL_SUPPORTED_DDR maxClSupported_DDR;
    MAX_CL_SUPPORTED_SD  maxClSupported_SD;
    unsigned int         moduleBankDensity;
    /* module attributes (true for yes) */
    bool                 bufferedAddrAndControlInputs;
    bool                 registeredAddrAndControlInputs;
    bool                 onCardPLL;
    bool                 bufferedDQMBinputs;
    bool                 registeredDQMBinputs;
    bool	         differentialClockInput;
    bool                 redundantRowAddressing;

    /* module general attributes */
    bool                 suportedAutoPreCharge;
    bool                 suportedPreChargeAll;
    bool                 suportedEarlyRasPreCharge;
    bool                 suportedWrite1ReadBurst;
    bool                 suported5PercentLowVCC;
    bool                 suported5PercentUpperVCC;
    /* module timing parameters */
    unsigned int         minRasToCasDelay;
    unsigned int         minRowActiveRowActiveDelay;
    unsigned int         minRasPulseWidth;
    unsigned int         minRowPrechargeTime;   			/* measured in ns */

    int   	         addrAndCommandHoldTime;			/* LoP left of point (measured in ns) */
    int   	         addrAndCommandSetupTime;				/* (measured in ns/100) */
    int   	         dataInputSetupTime;				/* LoP left of point (measured in ns) */
    int   	         dataInputHoldTime;				/* LoP left of point (measured in ns) */
/* tAC times for highest 2nd and 3rd highest CAS Latency values */
    unsigned int   	 clockToDataOut_LoP;				/* LoP left of point (measured in ns) */
    unsigned int   	 clockToDataOut_RoP;				/* RoP right of point (measured in ns)*/
    unsigned int   	 clockToDataOutMinus1_LoP;				/* LoP left of point (measured in ns) */
    unsigned int   	 clockToDataOutMinus1_RoP;			/* RoP right of point (measured in ns)*/
    unsigned int   	 clockToDataOutMinus2_LoP;				/* LoP left of point (measured in ns) */
    unsigned int   	 clockToDataOutMinus2_RoP;			/* RoP right of point (measured in ns)*/

    unsigned int   	 minimumCycleTimeAtMaxCasLatancy_LoP;		/* LoP left of point (measured in ns) */
    unsigned int   	 minimumCycleTimeAtMaxCasLatancy_RoP;		/* RoP right of point (measured in ns)*/

    unsigned int   	 minimumCycleTimeAtMaxCasLatancyMinus1_LoP;	/* LoP left of point (measured in ns) */
    unsigned int   	 minimumCycleTimeAtMaxCasLatancyMinus1_RoP;	/* RoP right of point (measured in ns)*/

    unsigned int   	 minimumCycleTimeAtMaxCasLatancyMinus2_LoP;	/* LoP left of point (measured in ns) */
    unsigned int   	 minimumCycleTimeAtMaxCasLatancyMinus2_RoP;	/* RoP right of point (measured in ns)*/

    /* Parameters calculated from
       the extracted DIMM information */
    unsigned int         size;
    unsigned int         deviceDensity;           		       	/* 16,64,128,256 or 512 Mbit */
    unsigned int         numberOfDevices;
    uchar 		 drb_size;				       	/* DRAM size in n*64Mbit */
    uchar 		 slot;						/* Slot Number this module is inserted in */
    uchar 		 spd_raw_data[128];			       	/* Content of SPD-EEPROM copied 1:1 */
#ifdef DEBUG
    uchar 		 manufactura[8];				/* Content of SPD-EEPROM Byte 64-71 */
    uchar 		 modul_id[18];					/* Content of SPD-EEPROM Byte 73-90 */
    uchar 		 vendor_data[27];			       	/* Content of SPD-EEPROM Byte 99-125 */
    unsigned long	 modul_serial_no;			       	/* Content of SPD-EEPROM Byte 95-98 */
    unsigned int         manufac_date;					/* Content of SPD-EEPROM Byte 93-94 */
    unsigned int         modul_revision;				/* Content of SPD-EEPROM Byte 91-92 */
    uchar 		 manufac_place;					/* Content of SPD-EEPROM Byte 72 */

#endif
} AUX_MEM_DIMM_INFO;


/*
 * translate ns.ns/10 coding of SPD timing values
 * into 10 ps unit values
 */
static inline unsigned short
NS10to10PS(unsigned char spd_byte)
{
	unsigned short ns, ns10;

	/* isolate upper nibble */
	ns = (spd_byte >> 4) & 0x0F;
	/* isolate lower nibble */
	ns10 = (spd_byte & 0x0F);

	return(ns*100 + ns10*10);
}

/*
 * translate ns coding of SPD timing values
 * into 10 ps unit values
 */
static inline unsigned short
NSto10PS(unsigned char spd_byte)
{
	return(spd_byte*100);
}

/* This code reads the SPD chip on the sdram and populates
 * the array which is passed in with the relevant information */
/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
static int
check_dimm(uchar slot, AUX_MEM_DIMM_INFO *dimmInfo)

{
 DECLARE_GLOBAL_DATA_PTR;

     unsigned long spd_checksum;

	uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
	int ret;
    	unsigned int        i,j,density = 1,devicesForErrCheck = 0;
#ifdef DEBUG
    	unsigned int        k;
#endif
    	unsigned int    rightOfPoint = 0,leftOfPoint = 0, mult, div, time_tmp;
	int                 sign = 1,shift,maskLeftOfPoint,maskRightOfPoint;
	uchar supp_cal, cal_val;
	ulong memclk, tmemclk;
	ulong tmp;
	uchar trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks;
	uchar data[128];

	memclk = gd->bus_clk;
 	tmemclk = 1000000000 / (memclk / 100);  /* in 10 ps units */

	memset(data, 0, sizeof(data));


	ret = 0;

	DP(puts("before i2c read\n"));

        ret = i2c_read(addr, 0, 2, data, 128);

	DP(puts("after i2c read\n"));

	if ((data[64] != 'e') || (data[65] != 's') || (data[66] != 'd') || (data[67] != '-') ||
	    (data[68] != 'g') || (data[69] != 'm') || (data[70] != 'b') || (data[71] != 'h'))
	    {
	    ret = -1;
	    }

	if ((ret != 0) && (slot == 0))
	    {
	    memset(data, 0, sizeof(data));
	    data[ 0] = 0x80; data[ 1] = 0x08; data[ 2] = 0x07; data[ 3] = 0x0c;
	    data[ 4] = 0x09; data[ 5] = 0x01; data[ 6] = 0x48; data[ 7] = 0x00;
	    data[ 8] = 0x04; data[ 9] = 0x75; data[10] = 0x80; data[11] = 0x02;
	    data[12] = 0x80; data[13] = 0x10; data[14] = 0x08; data[15] = 0x01;
	    data[16] = 0x0e; data[17] = 0x04; data[18] = 0x0c; data[19] = 0x01;
	    data[20] = 0x02; data[21] = 0x20; data[22] = 0x00; data[23] = 0xa0;
	    data[24] = 0x80; data[25] = 0x00; data[26] = 0x00; data[27] = 0x50;
	    data[28] = 0x3c; data[29] = 0x50; data[30] = 0x32; data[31] = 0x10;
	    data[32] = 0xb0; data[33] = 0xb0; data[34] = 0x60; data[35] = 0x60;
	    data[64] = 'e' ; data[65] = 's' ; data[66] = 'd' ; data[67] = '-' ;
	    data[68] = 'g' ; data[69] = 'm' ; data[70] = 'b' ; data[71] = 'h' ;
            ret = 0;
	    }

	/* zero all the values */
	memset(dimmInfo, 0, sizeof(*dimmInfo));

	/* copy the SPD content 1:1 into the dimmInfo structure*/
    	for(i = 0 ; i <= 127 ; i++)
    	{
	  dimmInfo->spd_raw_data[i] = data[i];
    	}

	if (ret) {
		DP(printf("No DIMM in slot %d [err = %x]\n", slot, ret));
		return 0;
	}
	else
	dimmInfo->slot = slot;		/* start to fill up dimminfo for this "slot" */

#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT

    for(i = 0 ; i <= 127 ; i++)
    {
	printf("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i], data[i]);
    }

#endif
#ifdef DEBUG
/* find Manufactura of Dimm Module */
    for(i = 0 ; i < sizeof(dimmInfo->manufactura) ; i++)
    {
	dimmInfo->manufactura[i] = data[64+i];
    }
    printf("\nThis RAM-Module is produced by: 		%s\n", dimmInfo->manufactura);

/* find Manul-ID of Dimm Module */
    for(i = 0 ; i < sizeof(dimmInfo->modul_id) ; i++)
    {
	dimmInfo->modul_id[i] = data[73+i];
    }
    printf("The Module-ID of this RAM-Module is: 		%s\n", dimmInfo->modul_id);

/* find Vendor-Data of Dimm Module */
    for(i = 0 ; i < sizeof(dimmInfo->vendor_data) ; i++)
    {
	dimmInfo->vendor_data[i] = data[99+i];
    }
    printf("Vendor Data of this RAM-Module is: 		%s\n", dimmInfo->vendor_data);

/* find modul_serial_no of Dimm Module */
    dimmInfo->modul_serial_no = (*((unsigned long *)(&data[95])));
    printf("Serial No. of this RAM-Module is: 		%ld (%lx)\n", dimmInfo->modul_serial_no, dimmInfo->modul_serial_no);

/* find Manufac-Data of Dimm Module */
    dimmInfo->manufac_date = (*((unsigned int *)(&data[93])));
    printf("Manufactoring Date of this RAM-Module is: 	%d.%d\n", data[93], data [94]); /*dimmInfo->manufac_date*/

/* find modul_revision of Dimm Module */
    dimmInfo->modul_revision = (*((unsigned int *)(&data[91])));
    printf("Module Revision of this RAM-Module is: 		%d.%d\n", data[91], data [92]); /* dimmInfo->modul_revision*/

/* find manufac_place of Dimm Module */
    dimmInfo->manufac_place = (*((unsigned char *)(&data[72])));
    printf("manufac_place of this RAM-Module is: 		%d\n", dimmInfo->manufac_place);

#endif
/*------------------------------------------------------------------------------------------------------------------------------*/
/* calculate SPD checksum */
/*------------------------------------------------------------------------------------------------------------------------------*/
    spd_checksum = 0;
#if 0 /* test-only */
    for(i = 0 ; i <= 62 ; i++)
    {
     spd_checksum += data[i];
    }

    if ((spd_checksum & 0xff) != data[63])
    {
    	printf("### Error in SPD Checksum !!! Is_value: %2x should value %2x\n", (unsigned int)(spd_checksum & 0xff), data[63]);
        	hang();
    }

    else
    	printf("SPD Checksum ok!\n");
#endif /* test-only */

/*------------------------------------------------------------------------------------------------------------------------------*/
    for(i = 2 ; i <= 35 ; i++)
    {
        switch(i)
        {
        case 2:  /* Memory type (DDR / SDRAM) */
            dimmInfo->memoryType = (data[i] == 0x7)? DDR:SDRAM;
	#ifdef DEBUG
	if (dimmInfo->memoryType == 0)
		DP(printf("Dram_type in slot %d is: 			SDRAM\n", dimmInfo->slot));
	if (dimmInfo->memoryType == 1)
		DP(printf("Dram_type in slot %d is: 			DDRAM\n", dimmInfo->slot));
	#endif
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 3:  /* Number Of Row Addresses */
            dimmInfo->numOfRowAddresses = data[i];
	    DP(printf("Module Number of row addresses: 		%d\n", dimmInfo->numOfRowAddresses));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 4:  /* Number Of Column Addresses */
            dimmInfo->numOfColAddresses = data[i];
	    DP(printf("Module Number of col addresses: 		%d\n", dimmInfo->numOfColAddresses));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 5:  /* Number Of Module Banks */
            dimmInfo->numOfModuleBanks = data[i];
	    DP(printf("Number of Banks on Mod. : 				%d\n", dimmInfo->numOfModuleBanks));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 6:  /* Data Width */
            dimmInfo->dataWidth = data[i];
	    DP(printf("Module Data Width: 				%d\n", dimmInfo->dataWidth));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 8:  /* Voltage Interface */
            switch(data[i])
            {
            case 0x0:
                dimmInfo->voltageInterface = TTL_5V_TOLERANT;
		DP(printf("Module is 					TTL_5V_TOLERANT\n"));
                break;
            case 0x1:
                dimmInfo->voltageInterface = LVTTL;
		DP(printf("Module is 					LVTTL\n"));
                break;
            case 0x2:
                dimmInfo->voltageInterface = HSTL_1_5V;
	    DP(printf("Module is 					TTL_5V_TOLERANT\n"));
                break;
            case 0x3:
                dimmInfo->voltageInterface = SSTL_3_3V;
		DP(printf("Module is 					HSTL_1_5V\n"));
                break;
            case 0x4:
                dimmInfo->voltageInterface = SSTL_2_5V;
		DP(printf("Module is 					SSTL_2_5V\n"));
                break;
            default:
                dimmInfo->voltageInterface = VOLTAGE_UNKNOWN;
		DP(printf("Module is 					VOLTAGE_UNKNOWN\n"));
                break;
            }
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 9:  /* Minimum Cycle Time At Max CasLatancy */
            shift = (dimmInfo->memoryType == DDR)? 4:2;
            mult = (dimmInfo->memoryType == DDR)? 10:25;
            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
            leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
            rightOfPoint = (data[i] & maskRightOfPoint)* mult;
            dimmInfo->minimumCycleTimeAtMaxCasLatancy_LoP = leftOfPoint;
            dimmInfo->minimumCycleTimeAtMaxCasLatancy_RoP = rightOfPoint;
	    DP(printf("Minimum Cycle Time At Max CasLatancy: 		%d.%d [ns]\n",leftOfPoint, rightOfPoint));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 10: /* Clock To Data Out */
            div = (dimmInfo->memoryType == DDR)? 100:10;
            time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
            leftOfPoint     = time_tmp / div;
            rightOfPoint    = time_tmp % div;
            dimmInfo->clockToDataOut_LoP = leftOfPoint;
            dimmInfo->clockToDataOut_RoP = rightOfPoint;
	    DP(printf("Clock To Data Out: 				%d.%2d [ns]\n",leftOfPoint,  rightOfPoint ));
	    /*dimmInfo->clockToDataOut*/
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

#ifdef CONFIG_ECC
        case 11: /* Error Check Type */
            dimmInfo->errorCheckType = data[i];
	DP(printf("Error Check Type (0=NONE): 			%d\n", dimmInfo->errorCheckType));
            break;
#endif
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 12: /* Refresh Interval */
            dimmInfo->RefreshInterval = data[i];
	DP(printf("RefreshInterval (80= Self refresh Normal, 15.625us) : %x\n", dimmInfo->RefreshInterval));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 13: /* Sdram Width */
            dimmInfo->sdramWidth = data[i];
	DP(printf("Sdram Width: 					%d\n", dimmInfo->sdramWidth));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 14: /* Error Check Data Width */
            dimmInfo->errorCheckDataWidth = data[i];
	DP(printf("Error Check Data Width: 			%d\n", dimmInfo->errorCheckDataWidth));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 15: /* Minimum Clock Delay */
            dimmInfo->minClkDelay = data[i];
	DP(printf("Minimum Clock Delay: 				%d\n", dimmInfo->minClkDelay));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 16: /* Burst Length Supported */
                           /******-******-******-*******
                           * bit3 | bit2 | bit1 | bit0 *
                           *******-******-******-*******
            burst length = *  8   |  4   |   2  |   1  *
                           *****************************

            If for example bit0 and bit2 are set, the burst
            length supported are 1 and 4. */

            dimmInfo->burstLengthSupported = data[i];
#ifdef DEBUG
	DP(printf("Burst Length Supported: 			"));
	if (dimmInfo->burstLengthSupported & 0x01)
		DP(printf("1, "));
	if (dimmInfo->burstLengthSupported & 0x02)
		DP(printf("2, "));
	if (dimmInfo->burstLengthSupported & 0x04)
		DP(printf("4, "));
	if (dimmInfo->burstLengthSupported & 0x08)
		DP(printf("8, "));
	DP(printf(" Bit \n"));
#endif
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 17: /* Number Of Banks On Each Device */
            dimmInfo->numOfBanksOnEachDevice = data[i];
	    DP(printf("Number Of Banks On Each Chip: 			%d\n", dimmInfo->numOfBanksOnEachDevice));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 18: /* Suported Cas Latencies */

	  /*     DDR:
                   *******-******-******-******-******-******-******-*******
		   * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
		   *******-******-******-******-******-******-******-*******
	   CAS =   * TBD  | TBD  | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  *
	           *********************************************************
	   SDRAM:
	           *******-******-******-******-******-******-******-*******
		   * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 *
		   *******-******-******-******-******-******-******-*******
	   CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  *
	           ********************************************************/
	  dimmInfo->suportedCasLatencies = data[i];
#ifdef DEBUG
	  DP(printf("Suported Cas Latencies: (CL) 			"));
	  if (dimmInfo->memoryType == 0)		/* SDRAM*/
	    {
	      for (k = 0; k <=7; k++)
		{
		  if (dimmInfo->suportedCasLatencies & (1 << k))
		    DP(printf("%d, 			", k+1));
		}

	    }
	  else					/* DDR-RAM*/
	    {
	      if (dimmInfo->suportedCasLatencies & 1)
		DP(printf("1, "));
	      if (dimmInfo->suportedCasLatencies & 2)
		DP(printf("1.5, "));
	      if (dimmInfo->suportedCasLatencies & 4)
		DP(printf("2, "));
	      if (dimmInfo->suportedCasLatencies & 8)
		DP(printf("2.5, "));
	      if (dimmInfo->suportedCasLatencies & 16)
		DP(printf("3, "));
	      if (dimmInfo->suportedCasLatencies & 32)
		DP(printf("3.5, "));

	    }
	  DP(printf("\n"));
#endif
	  /* Calculating MAX CAS latency */
	  for(j = 7 ; j > 0 ; j--)
	    {
	      if(((dimmInfo->suportedCasLatencies >> j) & 0x1) == 1)
		{
		  switch(dimmInfo->memoryType)
		    {
		    case DDR:
		      /* CAS latency 1, 1.5, 2, 2.5, 3, 3.5 */
		      switch (j)
			{
			case 7:
			  DP(printf("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
			  dimmInfo->maxClSupported_DDR = DDR_CL_FAULT;
			  hang();
			  break;
			case 6:
			  DP(printf("Max. Cas Latencies (DDR): 			ERROR !!!\n"));
			  dimmInfo->maxClSupported_DDR = DDR_CL_FAULT;
			  hang();
			  break;
			case 5:
			  DP(printf("Max. Cas Latencies (DDR): 			3.5 clk's\n"));
			  dimmInfo->maxClSupported_DDR = DDR_CL_3_5;
			  break;
			case 4:
			  DP(printf("Max. Cas Latencies (DDR): 			3 clk's \n"));
			  dimmInfo->maxClSupported_DDR = DDR_CL_3;
			  break;
			case 3:
			  DP(printf("Max. Cas Latencies (DDR): 			2.5 clk's \n"));
			  dimmInfo->maxClSupported_DDR = DDR_CL_2_5;
			  break;
			case 2:
			  DP(printf("Max. Cas Latencies (DDR): 			2 clk's \n"));
			  dimmInfo->maxClSupported_DDR = DDR_CL_2;
			  break;
			case 1:
			  DP(printf("Max. Cas Latencies (DDR): 			1.5 clk's \n"));
			  dimmInfo->maxClSupported_DDR = DDR_CL_1_5;
			  break;
			}
		      dimmInfo->maxCASlatencySupported_LoP = 1 + (int) (5 * j /10);
		      if (((5*j) % 10) != 0)
			dimmInfo->maxCASlatencySupported_RoP =  5;
		      else
			dimmInfo->maxCASlatencySupported_RoP =  0;
		      DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): 	%d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP));
		      break;
		    case SDRAM:
		      /* CAS latency 1, 2, 3, 4, 5, 6, 7 */
		      dimmInfo->maxClSupported_SD = j;			/*  Cas Latency DDR-RAM Coded			*/
		      DP(printf("Max. Cas Latencies (SD): %d\n", dimmInfo->maxClSupported_SD));
		      dimmInfo->maxCASlatencySupported_LoP =  j ;
		      dimmInfo->maxCASlatencySupported_RoP =  0;
		      DP(printf("Max. Cas Latencies (DDR LoP.RoP Notation): %d.%d \n", dimmInfo->maxCASlatencySupported_LoP, dimmInfo->maxCASlatencySupported_RoP));
		      break;
		    }
		  break;
		}
            }
	  break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 21: /* Buffered Address And Control Inputs */
            DP(printf("\nModul Attributes (SPD Byte 21): \n"));
            dimmInfo->bufferedAddrAndControlInputs = data[i] & BIT0;
            dimmInfo->registeredAddrAndControlInputs = (data[i] & BIT1) >> 1;
            dimmInfo->onCardPLL = (data[i] & BIT2) >> 2;
            dimmInfo->bufferedDQMBinputs = (data[i] & BIT3) >> 3;
            dimmInfo->registeredDQMBinputs = (data[i] & BIT4) >> 4;
            dimmInfo->differentialClockInput = (data[i] & BIT5) >> 5;
            dimmInfo->redundantRowAddressing = (data[i] & BIT6) >> 6;
#ifdef DEBUG
            if (dimmInfo->bufferedAddrAndControlInputs == 1)
 	           DP(printf(" - Buffered Address/Control Input:		Yes \n"));
            else
 	           DP(printf(" - Buffered Address/Control Input:		No \n"));

            if (dimmInfo->registeredAddrAndControlInputs == 1)
 	           DP(printf(" - Registered Address/Control Input:		Yes \n"));
            else
 	           DP(printf(" - Registered Address/Control Input:		No \n"));

            if (dimmInfo->onCardPLL == 1)
 	           DP(printf(" - On-Card PLL (clock):				Yes \n"));
            else
 	           DP(printf(" - On-Card PLL (clock):				No \n"));

            if (dimmInfo->bufferedDQMBinputs == 1)
 	           DP(printf(" - Bufferd DQMB Inputs:				Yes \n"));
            else
 	           DP(printf(" - Bufferd DQMB Inputs:				No \n"));

            if (dimmInfo->registeredDQMBinputs == 1)
 	           DP(printf(" - Registered DQMB Inputs:			Yes \n"));
            else
 	           DP(printf(" - Registered DQMB Inputs:			No \n"));

            if (dimmInfo->differentialClockInput == 1)
 	           DP(printf(" - Differential Clock Input:			Yes \n"));
            else
 	           DP(printf(" - Differential Clock Input:			No \n"));

            if (dimmInfo->redundantRowAddressing == 1)
 	           DP(printf(" - redundant Row Addressing:			Yes \n"));
            else
 	           DP(printf(" - redundant Row Addressing:			No \n"));

#endif
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 22: /* Suported AutoPreCharge */
            DP(printf("\nModul Attributes (SPD Byte 22): \n"));
            dimmInfo->suportedEarlyRasPreCharge= data[i] & BIT0;
            dimmInfo->suportedAutoPreCharge = (data[i] & BIT1) >> 1;
            dimmInfo->suportedPreChargeAll = (data[i] & BIT2) >> 2;
            dimmInfo->suportedWrite1ReadBurst= (data[i] & BIT3) >> 3;
            dimmInfo->suported5PercentLowVCC= (data[i] & BIT4) >> 4;
            dimmInfo->suported5PercentUpperVCC= (data[i] & BIT5) >> 5;
#ifdef DEBUG
            if (dimmInfo->suportedEarlyRasPreCharge == 1)
 	           DP(printf(" - Early Ras Precharge:			Yes \n"));
            else
 	           DP(printf(" -  Early Ras Precharge:			No \n"));

            if (dimmInfo->suportedAutoPreCharge == 1)
 	           DP(printf(" - AutoPreCharge:				Yes \n"));
            else
 	           DP(printf(" -  AutoPreCharge:				No \n"));

            if (dimmInfo->suportedPreChargeAll == 1)
 	           DP(printf(" - Precharge All:				Yes \n"));
            else
 	           DP(printf(" -  Precharge All:				No \n"));

            if (dimmInfo->suportedWrite1ReadBurst == 1)
 	           DP(printf(" - Write 1/ReadBurst:				Yes \n"));
            else
 	           DP(printf(" -  Write 1/ReadBurst:				No \n"));

            if (dimmInfo->suported5PercentLowVCC == 1)
 	           DP(printf(" - lower VCC tolerance:			5 Percent \n"));
            else
 	           DP(printf("  - lower VCC tolerance:			10 Percent \n"));

            if (dimmInfo->suported5PercentUpperVCC == 1)
 	           DP(printf(" - upper VCC tolerance:			5 Percent \n"));
            else
 	           DP(printf(" -  upper VCC tolerance:			10 Percent \n"));

#endif
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 23: /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
            shift = (dimmInfo->memoryType == DDR)? 4:2;
            mult = (dimmInfo->memoryType == DDR)? 10:25;
            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
            leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
            rightOfPoint = (data[i] & maskRightOfPoint)* mult;
            dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_LoP = leftOfPoint;
            dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus1_RoP = rightOfPoint;
	    DP(printf("Minimum Cycle Time At 2nd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint ));
	    /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/
            div = (dimmInfo->memoryType == DDR)? 100:10;
            time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
            leftOfPoint     = time_tmp / div;
            rightOfPoint    = time_tmp % div;
            dimmInfo->clockToDataOutMinus1_LoP = leftOfPoint;
            dimmInfo->clockToDataOutMinus1_RoP = rightOfPoint;
	    DP(printf("Clock To Data Out (2nd CL value): 		%d.%2d [ns]\n",leftOfPoint,  rightOfPoint ));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 25: /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
            shift = (dimmInfo->memoryType == DDR)? 4:2;
            mult = (dimmInfo->memoryType == DDR)? 10:25;
            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xf0:0xfc;
            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0xf:0x03;
            leftOfPoint = (data[i] & maskLeftOfPoint) >> shift;
            rightOfPoint = (data[i] & maskRightOfPoint)* mult;
            dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_LoP = leftOfPoint;
            dimmInfo->minimumCycleTimeAtMaxCasLatancyMinus2_RoP = rightOfPoint;
	    DP(printf("Minimum Cycle Time At 3rd highest CasLatancy (0 = Not supported): %d.%d [ns]\n",leftOfPoint, rightOfPoint ));
	    /*dimmInfo->minimumCycleTimeAtMaxCasLatancy*/
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/
            div = (dimmInfo->memoryType == DDR)? 100:10;
            time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
            leftOfPoint     = time_tmp / div;
            rightOfPoint    = time_tmp % div;
            dimmInfo->clockToDataOutMinus2_LoP = leftOfPoint;
            dimmInfo->clockToDataOutMinus2_RoP = rightOfPoint;
	    DP(printf("Clock To Data Out (3rd CL value): 		%d.%2d [ns]\n",leftOfPoint,  rightOfPoint ));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 27: /* Minimum Row Precharge Time */
            shift = (dimmInfo->memoryType == DDR)? 2:0;
            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
            leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
            rightOfPoint = (data[i] & maskRightOfPoint)*25;

            dimmInfo->minRowPrechargeTime = ((leftOfPoint*100) + rightOfPoint);	/* measured in n times 10ps Intervals */
	trp_clocks = (dimmInfo->minRowPrechargeTime + (tmemclk-1)) /  tmemclk;
	DP(printf("*** 1 clock cycle = %ld  10ps intervalls = %ld.%ld ns****\n", tmemclk, tmemclk/100, tmemclk%100 ));
	DP(printf("Minimum Row Precharge Time [ns]: 		%d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 28: /* Minimum Row Active to Row Active Time */
            shift = (dimmInfo->memoryType == DDR)? 2:0;
            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
            leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
            rightOfPoint = (data[i] & maskRightOfPoint)*25;

            dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint);	/* measured in 100ns Intervals */
	trrd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1)) / tmemclk;
	DP(printf("Minimum Row Active -To- Row Active Delay [ns]: 	%d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 29: /* Minimum Ras-To-Cas Delay */
            shift = (dimmInfo->memoryType == DDR)? 2:0;
            maskLeftOfPoint = (dimmInfo->memoryType == DDR)? 0xfc:0xff;
            maskRightOfPoint = (dimmInfo->memoryType == DDR)? 0x03:0x00;
            leftOfPoint = ((data[i] & maskLeftOfPoint) >> shift);
            rightOfPoint = (data[i] & maskRightOfPoint)*25;

            dimmInfo->minRowActiveRowActiveDelay = ((leftOfPoint*100) + rightOfPoint);	/* measured in 100ns Intervals */
	trcd_clocks = (dimmInfo->minRowActiveRowActiveDelay + (tmemclk-1) )/ tmemclk;
	DP(printf("Minimum Ras-To-Cas Delay [ns]: 			%d.%2d = in Clk cycles %d\n", leftOfPoint, rightOfPoint, trp_clocks));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 30: /* Minimum Ras Pulse Width */
            dimmInfo->minRasPulseWidth = data[i];
	tras_clocks = (NSto10PS(data[i])+(tmemclk-1)) / tmemclk;
	DP(printf("Minimum Ras Pulse Width [ns]: 			%d = in Clk cycles %d\n", dimmInfo->minRasPulseWidth, tras_clocks));

            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 31: /* Module Bank Density */
            dimmInfo->moduleBankDensity = data[i];
	DP(printf("Module Bank Density: 				%d\n", dimmInfo->moduleBankDensity));
#ifdef DEBUG
	DP(printf("*** Offered Densities (more than 1 = Multisize-Module): "));
	{
		if (dimmInfo->moduleBankDensity & 1)
			DP(printf("4MB, "));
		if (dimmInfo->moduleBankDensity & 2)
			DP(printf("8MB, "));
		if (dimmInfo->moduleBankDensity & 4)
			DP(printf("16MB, "));
		if (dimmInfo->moduleBankDensity & 8)
			DP(printf("32MB, "));
		if (dimmInfo->moduleBankDensity & 16)
			DP(printf("64MB, "));
		if (dimmInfo->moduleBankDensity & 32)
			DP(printf("128MB, "));
		if ((dimmInfo->moduleBankDensity & 64) || (dimmInfo->moduleBankDensity & 128)) {
			DP(printf("ERROR, "));
		        	hang();
			}
	}
	DP(printf("\n"));
#endif
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 32: /* Address And Command Setup Time (measured in ns/1000) */
            sign = 1;
            switch(dimmInfo->memoryType)
            {
            case DDR:
            	  time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
                leftOfPoint = time_tmp / 100;
                rightOfPoint = time_tmp % 100;
                break;
            case SDRAM:
                leftOfPoint = (data[i] & 0xf0) >> 4;
                if(leftOfPoint > 7)
                {
                    leftOfPoint = data[i] & 0x70 >> 4;
                    sign = -1;
                }
                rightOfPoint = (data[i] & 0x0f);
                break;
            }
            dimmInfo->addrAndCommandSetupTime = (leftOfPoint*100 + rightOfPoint) * sign;
	DP(printf("Address And Command Setup Time [ns]: 		%d.%d\n", sign*leftOfPoint, rightOfPoint));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 33: /* Address And Command Hold Time */
            sign = 1;
            switch(dimmInfo->memoryType)
            {
            case DDR:
            	  time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
                leftOfPoint = time_tmp / 100;
                rightOfPoint = time_tmp % 100;
                break;
            case SDRAM:
                leftOfPoint = (data[i] & 0xf0) >> 4;
                if(leftOfPoint > 7)
                {
                    leftOfPoint = data[i] & 0x70 >> 4;
                    sign = -1;
                }
                rightOfPoint = (data[i] & 0x0f) ;
                break;
            }
            dimmInfo->addrAndCommandHoldTime = (leftOfPoint * 100 + rightOfPoint) * sign;
	DP(printf("Address And Command Hold Time [ns]: 		%d.%d\n", sign*leftOfPoint, rightOfPoint));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 34: /* Data Input Setup Time */
            sign = 1;
            switch(dimmInfo->memoryType)
            {
            case DDR:
            	  time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
                leftOfPoint = time_tmp / 100;
                rightOfPoint = time_tmp % 100;
                break;
            case SDRAM:
                leftOfPoint = (data[i] & 0xf0) >> 4;
                if( leftOfPoint > 7)
                {
                    leftOfPoint = data[i] & 0x70 >> 4;
                    sign = -1;
                }
                rightOfPoint = (data[i] & 0x0f );
                break;
            }
            dimmInfo->dataInputSetupTime = (leftOfPoint *100 + rightOfPoint) * sign;
	DP(printf("Data Input Setup Time [ns]: 			%d.%d\n", sign*leftOfPoint, rightOfPoint));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/

        case 35: /* Data Input Hold Time */
            sign = 1;
            switch(dimmInfo->memoryType)
            {
            case DDR:
            	  time_tmp = (((data[i] & 0xf0) >> 4)*10) + ((data[i] & 0x0f));
                leftOfPoint = time_tmp / 100;
                rightOfPoint = time_tmp % 100;
                break;
            case SDRAM:
                leftOfPoint = (data[i] & 0xf0) >> 4;
                if( leftOfPoint > 7)
                {
                    leftOfPoint = data[i] & 0x70 >> 4;
                    sign = -1;
                }
                rightOfPoint = (data[i] & 0x0f) ;
                break;
            }
            dimmInfo->dataInputHoldTime = (leftOfPoint *100 + rightOfPoint) * sign;
	DP(printf("Data Input Hold Time [ns]: 			%d.%d\n\n", sign*leftOfPoint, rightOfPoint));
            break;
/*------------------------------------------------------------------------------------------------------------------------------*/
        }
    }
    /* calculating the sdram density */
    for(i = 0;i < dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses;i++)
    {
        density = density*2;
    }
    dimmInfo->deviceDensity = density*dimmInfo->numOfBanksOnEachDevice*
                             dimmInfo->sdramWidth;
    dimmInfo->numberOfDevices = (dimmInfo->dataWidth / dimmInfo->sdramWidth)*
                                 dimmInfo->numOfModuleBanks;
    devicesForErrCheck = (dimmInfo->dataWidth - 64) / dimmInfo->sdramWidth ;
    if((dimmInfo->errorCheckType == 0x1) ||
       (dimmInfo->errorCheckType == 0x2) ||
       (dimmInfo->errorCheckType == 0x3))
    {
        dimmInfo->size = (dimmInfo->deviceDensity / 8)*
                         (dimmInfo->numberOfDevices - devicesForErrCheck);
    }
    else
    {
        dimmInfo->size = (dimmInfo->deviceDensity/8)*dimmInfo->numberOfDevices;
    }

    /* compute the module DRB size */
    tmp = (1 << (dimmInfo->numOfRowAddresses + dimmInfo->numOfColAddresses));
    tmp *= dimmInfo->numOfModuleBanks;
    tmp *= dimmInfo->sdramWidth;
    tmp = tmp >> 24;    /* div by 0x4000000 (64M)	*/
    dimmInfo->drb_size = (uchar)tmp;
    DP(printf("Module DRB size (n*64Mbit): %d\n", dimmInfo->drb_size));

	/* try a CAS latency of 3 first... */

	/* bit 1 is CL2, bit 2 is CL3 */
	supp_cal = (dimmInfo->suportedCasLatencies & 0x1c) >> 1;

	cal_val = 0;
	if (supp_cal & 8) {
		if (NS10to10PS(data[9]) <= tmemclk)
			cal_val = 6;
	}
	if (supp_cal & 4) {
		if (NS10to10PS(data[9]) <= tmemclk)
			cal_val = 5;
	}

	/* then 2... */
	if (supp_cal & 2) {
		if (NS10to10PS(data[23]) <= tmemclk)
			cal_val = 4;
	}

	DP(printf("cal_val = %d\n", cal_val*5));

	/* bummer, did't work... */
	if (cal_val == 0) {
		DP(printf("Couldn't find a good CAS latency\n"));
	        	hang();
		return 0;
	}

    return true;
}

/* sets up the GT properly with information passed in */
int
setup_sdram(AUX_MEM_DIMM_INFO *info)
{
	ulong tmp, check;
              ulong tmp_sdram_mode=0; 		/* 0x141c*/
              ulong tmp_dunit_control_low=0;	/* 0x1404*/
	int i;

	/* sanity checking */
	if (! info->numOfModuleBanks) {
		printf("setup_sdram called with 0 banks\n");
		return 1;
	}

	/* delay line */

	/* Program the GT with the discovered data */
	if (info->registeredAddrAndControlInputs == true)
		DP(printf("Module is registered, but we do not support registered Modules !!!\n"));


	/* delay line */
	set_dfcdlInit(); /* may be its not needed */
	DP(printf("Delay line set done\n"));

	/* set SDRAM mode NOP*/ /* To_do check it*/
	GT_REG_WRITE(SDRAM_OPERATION, 0x5);
	while (GTREGREAD(SDRAM_OPERATION) != 0) {
		DP(printf("\n*** SDRAM_OPERATION 1418: Module still busy ... please wait... ***\n"));
		}

	/* SDRAM configuration */
	GT_REG_WRITE(SDRAM_CONFIG, 0x58200400);
	DP(printf("sdram_conf 0x1400: %08x\n", GTREGREAD(SDRAM_CONFIG)));

	/* SDRAM open pages controll keep open as much as I can*/
	GT_REG_WRITE(SDRAM_OPEN_PAGES_CONTROL, 0x0);
	DP(printf("sdram_open_pages_controll 0x1414: %08x\n", GTREGREAD(SDRAM_OPEN_PAGES_CONTROL)));


	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
	tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); 		/* Clock Domain Sync from power on reset*/
	if (tmp == 0)
		DP(printf("Core Signals are sync (by HW-Setting)!!!\n"));
	else
		DP(printf("Core Signals syncs. are bypassed (by HW-Setting)!!!\n"));

	/* SDRAM set CAS Lentency according to SPD information*/
	switch(info->memoryType)
	  {
	  case SDRAM:
	    DP(printf("### SD-RAM not supported yet !!!\n"));
	    hang();
	    /* ToDo fill SD-RAM if needed !!!!!*/
	    break;

	  case DDR:
	    DP(printf("### SET-CL for DDR-RAM\n"));

	    switch (info->maxClSupported_DDR)
	      {
	      case DDR_CL_3:
		tmp_dunit_control_low = 0x3c000000;             /* Read-Data sampled on falling edge of Clk*/
		tmp_sdram_mode = 0x32;			        /* CL=3 Burstlength = 4*/
		DP(printf("Max. CL is 3 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
		break;

	      case DDR_CL_2_5:
		if (tmp == 1)	/* clocks sync*/
		  {
		    tmp_dunit_control_low = 0x24000000;		/* Read-Data sampled on falling edge of Clk*/
		    tmp_sdram_mode = 0x62;			/* CL=2,5 Burstlength = 4*/
		    DP(printf("Max. CL is 2,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
		  }
		else	/* clk sync. bypassed	*/
		  {
		    tmp_dunit_control_low = 0x03000000;		/* Read-Data sampled on rising edge of Clk*/
		    tmp_sdram_mode = 0x62;			/* CL=2,5 Burstlength = 4*/
		    DP(printf("Max. CL is 2,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
		  }
		break;

	      case DDR_CL_2:
		if (tmp == 1)	/* Sync*/
		  {
		    tmp_dunit_control_low = 0x03000000;		/* Read-Data sampled on rising edge of Clk*/
		    tmp_sdram_mode = 0x22;			/* CL=2 Burstlength = 4*/
		    DP(printf("Max. CL is 2s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
		  }
		else	/* Not sync.	*/
		  {
		    tmp_dunit_control_low = 0x3b000000;         /* Read-Data sampled on rising edge of Clk*/
		    tmp_sdram_mode = 0x22;			/* CL=2 Burstlength = 4*/
		    DP(printf("Max. CL is 2 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
		  }
		break;

	      case DDR_CL_1_5:
		if (tmp == 1)	/* Sync*/
		  {
		    tmp_dunit_control_low = 0x23000000;		/* Read-Data sampled on falling edge of Clk*/
		    tmp_sdram_mode = 0x52;			/* CL=1,5 Burstlength = 4*/
		    DP(printf("Max. CL is 1,5s CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
		  }
		else	/* not sync*/
		  {
		    tmp_dunit_control_low = 0x1a000000;         /* Read-Data sampled on rising edge of Clk*/
		    tmp_sdram_mode = 0x52;			/* CL=1,5 Burstlength = 4*/
		    DP(printf("Max. CL is 1,5 CLKs 0x141c= %08lx, 0x1404 = %08lx\n",tmp_sdram_mode, tmp_dunit_control_low ));
		  }
		break;

	      default:
		printf("Max. CL is out of range %d\n", info->maxClSupported_DDR);
		hang();
		break;
	      }
	    break;
	  }

	/* Write results of CL detection procedure */
	GT_REG_WRITE(SDRAM_MODE, tmp_sdram_mode);
	/* set SDRAM mode SetCommand 0x1418*/
	GT_REG_WRITE(SDRAM_OPERATION, 0x3);
	while (GTREGREAD(SDRAM_OPERATION) != 0) {
		DP(printf("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
		}


	/* SDRAM D_UNIT_CONTROL_LOW 0x1404 */
	tmp = (GTREGREAD(D_UNIT_CONTROL_LOW) & 0x01); 		/* Clock Domain Sync from power on reset*/
	if (tmp != 1)	/*clocks are not sync*/
	 {
	  	/* asyncmode*/
		GT_REG_WRITE(D_UNIT_CONTROL_LOW ,
               	(GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x18110780 | tmp_dunit_control_low );
	 }
	else
	 {
	  	/* syncmode*/
		GT_REG_WRITE(D_UNIT_CONTROL_LOW ,
		(GTREGREAD(D_UNIT_CONTROL_LOW) & 0x7F) | 0x00110000 | tmp_dunit_control_low );
	  }

	/* set SDRAM mode SetCommand 0x1418*/
	GT_REG_WRITE(SDRAM_OPERATION, 0x3);
	while (GTREGREAD(SDRAM_OPERATION) != 0) {
		DP(printf("\n*** SDRAM_OPERATION 1418 after D_UNIT_CONTROL_LOW: Module still busy ... please wait... ***\n"));
		}

/*------------------------------------------------------------------------------ */


	/* bank parameters */
	/* SDRAM address decode register */
	/* program this with the default value */
	tmp = 0x02;


	DP(printf("drb_size (n*64Mbit): %d\n", info->drb_size));
	switch (info->drb_size) {
	case 1:			/* 64 Mbit */
	case 2:			/* 128 Mbit */
		DP(printf("RAM-Device_size 64Mbit or 128Mbit)\n"));
		tmp |= (0x00 << 4);
		break;
	case 4:			/* 256 Mbit */
	case 8:			/* 512 Mbit */
		DP(printf("RAM-Device_size 256Mbit or 512Mbit)\n"));
		tmp |= (0x01 << 4);
		break;
	case 16:			/* 1 Gbit */
	case 32:			/* 2 Gbit */
		DP(printf("RAM-Device_size 1Gbit or 2Gbit)\n"));
		tmp |= (0x02 << 4);
		break;
	default:
		printf("Error in dram size calculation\n");
		DP(printf("Assume: RAM-Device_size 1Gbit or 2Gbit)\n"));
		tmp |= (0x02 << 4);
		return 1;
	}

	/* SDRAM bank parameters */
	/* the param registers for slot 1 (banks 2+3) are offset by 0x8 */
	DP(printf("setting up slot %d config with: %08lx \n", info->slot, tmp));
	GT_REG_WRITE(SDRAM_ADDR_CONTROL, tmp);

/* ------------------------------------------------------------------------------ */

	DP(printf("setting up sdram_timing_control_low with: %08x \n", 0x11511220));
	GT_REG_WRITE(SDRAM_TIMING_CONTROL_LOW, 0x11511220);


/* ------------------------------------------------------------------------------ */

	/* SDRAM configuration */
	tmp = GTREGREAD(SDRAM_CONFIG);

	if (info->registeredAddrAndControlInputs || info->registeredDQMBinputs) {
	tmp |= (1 << 17);
	DP(printf("SPD says: registered Addr. and Cont.: %d; registered DQMBinputs: %d\n",info->registeredAddrAndControlInputs, info->registeredDQMBinputs));
	}

	/* Use buffer 1 to return read data to the CPU
	 * Page 426 MV64360 */
	tmp |= (1 << 26);
	DP(printf("Before Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG)));
	DP(printf("After Buffer assignment - sdram_conf: %08x\n", GTREGREAD(SDRAM_CONFIG)));

	/* SDRAM timing To_do:*/


	tmp = GTREGREAD(SDRAM_TIMING_CONTROL_HIGH);
	DP(printf("# sdram_timing_control_high is : %08lx \n", tmp));

	/* SDRAM address decode register */
	/* program this with the default value */
	tmp = GTREGREAD(SDRAM_ADDR_CONTROL);
	DP(printf("SDRAM address control (before: decode): %08x  ",  GTREGREAD(SDRAM_ADDR_CONTROL)));
	GT_REG_WRITE(SDRAM_ADDR_CONTROL, (tmp | 0x2));
	DP(printf("SDRAM address control (after: decode): %08x\n",  GTREGREAD(SDRAM_ADDR_CONTROL)));

	/* set the SDRAM configuration for each bank */

/*	for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
	{
		i = info->slot;
		DP(printf("\n*** Running a MRS cycle for bank %d ***\n", i));

		/* map the bank */
		memory_map_bank(i, 0, GB/4);
#if 1 /* test only */
		/* set SDRAM mode */ /* To_do check it*/
		GT_REG_WRITE(SDRAM_OPERATION, 0x3);
		check = GTREGREAD(SDRAM_OPERATION);
		DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check));


		/* switch back to normal operation mode */
		GT_REG_WRITE(SDRAM_OPERATION, 0);
		check = GTREGREAD(SDRAM_OPERATION);
		DP(printf("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n", check));
#endif /* test only */
		/* unmap the bank */
		memory_map_bank(i, 0, 0);
	}

	return 0;
}

/*
 * Check memory range for valid RAM. A simple memory test determines
 * the actually available RAM size between addresses `base' and
 * `base + maxsize'. Some (not all) hardware errors are detected:
 * - short between address lines
 * - short between data lines
 */
long int
dram_size(long int *base, long int maxsize)
{
    volatile long int	 *addr, *b=base;
    long int	 cnt, val, save1, save2;

#define STARTVAL (1<<20)	/* start test at 1M */
    for (cnt = STARTVAL/sizeof(long); cnt < maxsize/sizeof(long); cnt <<= 1) {
	    addr = base + cnt;	/* pointer arith! */

	    save1=*addr;		/* save contents of addr */
	    save2=*b;		/* save contents of base */

	    *addr=cnt;		/* write cnt to addr */
	    *b=0;			/* put null at base */

	    /* check at base address */
	    if ((*b) != 0) {
		*addr=save1;	/* restore *addr */
		*b=save2;	/* restore *b */
		return (0);
	    }
	    val = *addr;		/* read *addr */
	    val = *addr;		/* read *addr */

	    *addr=save1;
	    *b=save2;

	    if (val != cnt) {
	     	    DP(printf("Found %08x  at Address %08x (failure)\n", (unsigned int)val, (unsigned int) addr));
		    /* fix boundary condition.. STARTVAL means zero */
		    if(cnt==STARTVAL/sizeof(long)) cnt=0;
		    return (cnt * sizeof(long));
	    }
    }
    return maxsize;
}

/* ------------------------------------------------------------------------- */

/* ppcboot interface function to SDRAM init - this is where all the
 * controlling logic happens */
long int
initdram(int board_type)
{
	int s0 = 0, s1 = 0;
	int checkbank[4] = { [0 ... 3] = 0 };
        	ulong bank_no, realsize, total, check;
	AUX_MEM_DIMM_INFO dimmInfo1;
	AUX_MEM_DIMM_INFO dimmInfo2;
	int nhr;

	/* first, use the SPD to get info about the SDRAM/ DDRRAM */

	/* check the NHR bit and skip mem init if it's already done */
	nhr = get_hid0() & (1 << 16);

	if (nhr) {
		printf("Skipping SD- DDRRAM setup due to NHR bit being set\n");
	} else {
		/* DIMM0 */
		s0 = check_dimm(0, &dimmInfo1);

		/* DIMM1 */
		s1 = check_dimm(1, &dimmInfo2);

		memory_map_bank(0, 0, 0);
		memory_map_bank(1, 0, 0);
		memory_map_bank(2, 0, 0);
		memory_map_bank(3, 0, 0);

		if (dimmInfo1.numOfModuleBanks && setup_sdram(&dimmInfo1)) {
			printf("Setup for DIMM1 failed.\n");
		}

		if (dimmInfo2.numOfModuleBanks && setup_sdram(&dimmInfo2)) {
			printf("Setup for DIMM2 failed.\n");
		}

		/* set the NHR bit */
		set_hid0(get_hid0() | (1 << 16));
	}
	/* next, size the SDRAM banks */

	realsize = total = 0;
	check = GB/4;
	if (dimmInfo1.numOfModuleBanks > 0) {checkbank[0] = 1; printf("-- DIMM1 has 1 bank\n");}
	if (dimmInfo1.numOfModuleBanks > 1) {checkbank[1] = 1; printf("-- DIMM1 has 2 banks\n");}
	if (dimmInfo1.numOfModuleBanks > 2)
		printf("Error, SPD claims DIMM1 has >2 banks\n");

	if (dimmInfo2.numOfModuleBanks > 0) {checkbank[2] = 1; printf("-- DIMM2 has 1 bank\n");}
	if (dimmInfo2.numOfModuleBanks > 1) {checkbank[3] = 1; printf("-- DIMM2 has 2 banks\n");}
	if (dimmInfo2.numOfModuleBanks > 2)
		printf("Error, SPD claims DIMM2 has >2 banks\n");

	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
		/* skip over banks that are not populated */
		if (! checkbank[bank_no])
			continue;

		if ((total + check) > CFG_GT_REGS)
			check = CFG_GT_REGS - total;

		memory_map_bank(bank_no, total, check);
		realsize = dram_size((long int *)total, check);
		memory_map_bank(bank_no, total, realsize);

		total += realsize;
	}

/*	Setup Ethernet DMA Adress window to DRAM Area */
        return(total);
}

/* ***************************************************************************************
! *                             SDRAM INIT                                              *
! *  This procedure detect all Sdram types: 64, 128, 256, 512 Mbit, 1Gbit and 2Gb       *
! *               This procedure fits only the Atlantis                                *
! *                                                                                     *
! *************************************************************************************** */


/* ***************************************************************************************
! *                             DFCDL initialize MV643xx Design Considerations             *
! *                                                                                     *
! *************************************************************************************** */
int
set_dfcdlInit(void)
{
     int i;
     unsigned int dfcdl_word = 0x0000014f;
      for (i=0 ; i < 64; i++)
      {
	GT_REG_WRITE(SRAM_DATA0, dfcdl_word);
      }
     GT_REG_WRITE(DFCDL_CONFIG0, 0x00300000);	/* enable dynamic delay line updating */


     return (0);
}