blob: dc3f9f3c26ca38638e89b1f90a861d59a4f45ec3 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Chunhe Lanc3eb88d2014-09-12 14:47:09 +08002/**
3 * Copyright 2014 Freescale Semiconductor
4 *
5 * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
6 *
Chunhe Lanc3eb88d2014-09-12 14:47:09 +08007 * This file provides support for the ngPIXIS, a board-specific FPGA used on
8 * some Freescale reference boards.
9 */
10
11/*
12 * CPLD register set. Feel free to add board-specific #ifdefs where necessary.
13 */
14struct cpld_data {
15 u8 chip_id1; /* 0x00 - CPLD Chip ID1 Register */
16 u8 chip_id2; /* 0x01 - CPLD Chip ID2 Register */
17 u8 sw_maj_ver; /* 0x02 - CPLD Code Major Version Register */
18 u8 sw_min_ver; /* 0x03 - CPLD Code Minor Version Register */
19 u8 hw_ver; /* 0x04 - PCBA Version Register */
20 u8 software_on; /* 0x05 - Override Physical Switch Enable Register */
21 u8 cfg_rcw_src; /* 0x06 - RCW Source Location Control Register */
22 u8 res0; /* 0x07 - not used */
23 u8 vbank; /* 0x08 - Flash Bank Selection Control Register */
24 u8 sw1_sysclk; /* 0x09 - SW1 Status Read Back Register */
25 u8 sw2_status; /* 0x0a - SW2 Status Read Back Register */
26 u8 sw3_status; /* 0x0b - SW3 Status Read Back Register */
27 u8 sw4_status; /* 0x0c - SW4 Status Read Back Register */
28 u8 sys_reset; /* 0x0d - Reset System With Reserving Registers Value*/
29 u8 global_reset;/* 0x0e - Reset System With Default Registers Value */
30 u8 res1; /* 0x0f - not used */
31};
32
33#define CPLD_BANK_SEL_MASK 0x07
34#define CPLD_BANK_SEL_EN 0x04
35#define CPLD_SYSTEM_RESET 0x01
36#define CPLD_SELECT_BANK0 0x00
37#define CPLD_SELECT_BANK4 0x04
38#define CPLD_DEFAULT_BANK 0x01
39
40/* Pointer to the CPLD register set */
41
42u8 cpld_read(unsigned int reg);
43void cpld_write(unsigned int reg, u8 value);
44
45#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
46#define CPLD_WRITE(reg, value) \
47 cpld_write(offsetof(struct cpld_data, reg), value)
48