| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | TPS51632 Voltage regulators |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: Must be "ti,tps51632" |
| 5 | - reg: I2C slave address |
| 6 | |
| 7 | Optional properties: |
| 8 | - ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface. |
| 9 | - ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this |
| 10 | will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage |
| 11 | step is 10mV as per datasheet. |
| 12 | |
| 13 | Any property defined as part of the core regulator binding, defined in |
| 14 | regulator.txt, can also be used. |
| 15 | |
| 16 | Example: |
| 17 | |
| 18 | tps51632 { |
| 19 | compatible = "ti,tps51632"; |
| 20 | reg = <0x43>; |
| 21 | regulator-name = "tps51632-vout"; |
| 22 | regulator-min-microvolt = <500000>; |
| 23 | regulator-max-microvolt = <1500000>; |
| 24 | regulator-boot-on; |
| 25 | ti,enable-pwm-dvfs; |
| 26 | ti,dvfs-step-20mV; |
| 27 | }; |