Minghuan Lian | a4d6b61 | 2014-10-31 13:43:44 +0800 | [diff] [blame] | 1 | /* |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 2 | * Copyright 2014-2015 Freescale Semiconductor, Inc. |
Minghuan Lian | a4d6b61 | 2014-10-31 13:43:44 +0800 | [diff] [blame] | 3 | * Layerscape PCIe driver |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <asm/arch/fsl_serdes.h> |
| 10 | #include <pci.h> |
| 11 | #include <asm/io.h> |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 12 | #include <errno.h> |
| 13 | #include <malloc.h> |
Stuart Yoder | eaea504 | 2015-07-02 11:29:04 +0530 | [diff] [blame^] | 14 | #include <asm/arch-fsl-lsch3/fdt.h> |
Minghuan Lian | a4d6b61 | 2014-10-31 13:43:44 +0800 | [diff] [blame] | 15 | |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 16 | #ifndef CONFIG_SYS_PCI_MEMORY_BUS |
| 17 | #define CONFIG_SYS_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE |
| 18 | #endif |
| 19 | |
| 20 | #ifndef CONFIG_SYS_PCI_MEMORY_PHYS |
| 21 | #define CONFIG_SYS_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE |
| 22 | #endif |
| 23 | |
| 24 | #ifndef CONFIG_SYS_PCI_MEMORY_SIZE |
| 25 | #define CONFIG_SYS_PCI_MEMORY_SIZE (2 * 1024 * 1024 * 1024UL) /* 2G */ |
| 26 | #endif |
| 27 | |
| 28 | /* iATU registers */ |
| 29 | #define PCIE_ATU_VIEWPORT 0x900 |
| 30 | #define PCIE_ATU_REGION_INBOUND (0x1 << 31) |
| 31 | #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) |
| 32 | #define PCIE_ATU_REGION_INDEX0 (0x0 << 0) |
| 33 | #define PCIE_ATU_REGION_INDEX1 (0x1 << 0) |
| 34 | #define PCIE_ATU_REGION_INDEX2 (0x2 << 0) |
| 35 | #define PCIE_ATU_REGION_INDEX3 (0x3 << 0) |
| 36 | #define PCIE_ATU_CR1 0x904 |
| 37 | #define PCIE_ATU_TYPE_MEM (0x0 << 0) |
| 38 | #define PCIE_ATU_TYPE_IO (0x2 << 0) |
| 39 | #define PCIE_ATU_TYPE_CFG0 (0x4 << 0) |
| 40 | #define PCIE_ATU_TYPE_CFG1 (0x5 << 0) |
| 41 | #define PCIE_ATU_CR2 0x908 |
| 42 | #define PCIE_ATU_ENABLE (0x1 << 31) |
| 43 | #define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) |
| 44 | #define PCIE_ATU_LOWER_BASE 0x90C |
| 45 | #define PCIE_ATU_UPPER_BASE 0x910 |
| 46 | #define PCIE_ATU_LIMIT 0x914 |
| 47 | #define PCIE_ATU_LOWER_TARGET 0x918 |
| 48 | #define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) |
| 49 | #define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) |
| 50 | #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) |
| 51 | #define PCIE_ATU_UPPER_TARGET 0x91C |
| 52 | |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 53 | /* LUT registers */ |
| 54 | #define PCIE_LUT_BASE 0x80000 |
| 55 | #define PCIE_LUT_DBG 0x7FC |
| 56 | |
| 57 | #define PCIE_DBI_RO_WR_EN 0x8bc |
| 58 | |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 59 | #define PCIE_LINK_CAP 0x7c |
| 60 | #define PCIE_LINK_SPEED_MASK 0xf |
| 61 | #define PCIE_LINK_STA 0x82 |
| 62 | |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 63 | #define LTSSM_STATE_MASK 0x3f |
| 64 | #define LTSSM_PCIE_L0 0x11 /* L0 state */ |
| 65 | |
| 66 | #define PCIE_DBI_SIZE 0x100000 /* 1M */ |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 67 | |
| 68 | struct ls_pcie { |
| 69 | int idx; |
| 70 | void __iomem *dbi; |
| 71 | void __iomem *va_cfg0; |
| 72 | void __iomem *va_cfg1; |
| 73 | struct pci_controller hose; |
| 74 | }; |
| 75 | |
| 76 | struct ls_pcie_info { |
| 77 | unsigned long regs; |
| 78 | int pci_num; |
| 79 | u64 cfg0_phys; |
| 80 | u64 cfg0_size; |
| 81 | u64 cfg1_phys; |
| 82 | u64 cfg1_size; |
| 83 | u64 mem_bus; |
| 84 | u64 mem_phys; |
| 85 | u64 mem_size; |
| 86 | u64 io_bus; |
| 87 | u64 io_phys; |
| 88 | u64 io_size; |
| 89 | }; |
| 90 | |
| 91 | #define SET_LS_PCIE_INFO(x, num) \ |
| 92 | { \ |
| 93 | x.regs = CONFIG_SYS_PCIE##num##_ADDR; \ |
| 94 | x.cfg0_phys = CONFIG_SYS_PCIE_CFG0_PHYS_OFF + \ |
| 95 | CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ |
| 96 | x.cfg0_size = CONFIG_SYS_PCIE_CFG0_SIZE; \ |
| 97 | x.cfg1_phys = CONFIG_SYS_PCIE_CFG1_PHYS_OFF + \ |
| 98 | CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ |
| 99 | x.cfg1_size = CONFIG_SYS_PCIE_CFG1_SIZE; \ |
| 100 | x.mem_bus = CONFIG_SYS_PCIE_MEM_BUS; \ |
| 101 | x.mem_phys = CONFIG_SYS_PCIE_MEM_PHYS_OFF + \ |
| 102 | CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ |
| 103 | x.mem_size = CONFIG_SYS_PCIE_MEM_SIZE; \ |
| 104 | x.io_bus = CONFIG_SYS_PCIE_IO_BUS; \ |
| 105 | x.io_phys = CONFIG_SYS_PCIE_IO_PHYS_OFF + \ |
| 106 | CONFIG_SYS_PCIE##num##_PHYS_ADDR; \ |
| 107 | x.io_size = CONFIG_SYS_PCIE_IO_SIZE; \ |
| 108 | x.pci_num = num; \ |
| 109 | } |
| 110 | |
| 111 | #ifdef CONFIG_LS102XA |
| 112 | #include <asm/arch/immap_ls102xa.h> |
| 113 | |
| 114 | /* PEX1/2 Misc Ports Status Register */ |
| 115 | #define LTSSM_STATE_SHIFT 20 |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 116 | |
| 117 | static int ls_pcie_link_state(struct ls_pcie *pcie) |
| 118 | { |
| 119 | u32 state; |
| 120 | struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; |
| 121 | |
| 122 | state = in_be32(&scfg->pexmscportsr[pcie->idx]); |
| 123 | state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK; |
| 124 | if (state < LTSSM_PCIE_L0) { |
| 125 | debug("....PCIe link error. LTSSM=0x%02x.\n", state); |
| 126 | return 0; |
| 127 | } |
| 128 | |
| 129 | return 1; |
| 130 | } |
| 131 | #else |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 132 | static int ls_pcie_link_state(struct ls_pcie *pcie) |
| 133 | { |
| 134 | u32 state; |
| 135 | |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 136 | state = readl(pcie->dbi + PCIE_LUT_BASE + PCIE_LUT_DBG) & |
| 137 | LTSSM_STATE_MASK; |
| 138 | if (state < LTSSM_PCIE_L0) { |
| 139 | debug("....PCIe link error. LTSSM=0x%02x.\n", state); |
| 140 | return 0; |
| 141 | } |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 142 | |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 143 | return 1; |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 144 | } |
| 145 | #endif |
| 146 | |
| 147 | static int ls_pcie_link_up(struct ls_pcie *pcie) |
| 148 | { |
| 149 | int state; |
| 150 | u32 cap; |
| 151 | |
| 152 | state = ls_pcie_link_state(pcie); |
| 153 | if (state) |
| 154 | return state; |
| 155 | |
| 156 | /* Try to download speed to gen1 */ |
| 157 | cap = readl(pcie->dbi + PCIE_LINK_CAP); |
| 158 | writel((cap & (~PCIE_LINK_SPEED_MASK)) | 1, pcie->dbi + PCIE_LINK_CAP); |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 159 | /* |
| 160 | * Notice: the following delay has critical impact on link training |
| 161 | * if too short (<30ms) the link doesn't get up. |
| 162 | */ |
| 163 | mdelay(100); |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 164 | state = ls_pcie_link_state(pcie); |
| 165 | if (state) |
| 166 | return state; |
| 167 | |
| 168 | writel(cap, pcie->dbi + PCIE_LINK_CAP); |
| 169 | |
| 170 | return 0; |
| 171 | } |
| 172 | |
| 173 | static void ls_pcie_cfg0_set_busdev(struct ls_pcie *pcie, u32 busdev) |
| 174 | { |
| 175 | writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, |
| 176 | pcie->dbi + PCIE_ATU_VIEWPORT); |
| 177 | writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET); |
| 178 | } |
| 179 | |
| 180 | static void ls_pcie_cfg1_set_busdev(struct ls_pcie *pcie, u32 busdev) |
| 181 | { |
| 182 | writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, |
| 183 | pcie->dbi + PCIE_ATU_VIEWPORT); |
| 184 | writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET); |
| 185 | } |
| 186 | |
| 187 | static void ls_pcie_iatu_outbound_set(struct ls_pcie *pcie, int idx, int type, |
| 188 | u64 phys, u64 bus_addr, pci_size_t size) |
| 189 | { |
| 190 | writel(PCIE_ATU_REGION_OUTBOUND | idx, pcie->dbi + PCIE_ATU_VIEWPORT); |
| 191 | writel((u32)phys, pcie->dbi + PCIE_ATU_LOWER_BASE); |
| 192 | writel(phys >> 32, pcie->dbi + PCIE_ATU_UPPER_BASE); |
| 193 | writel(phys + size - 1, pcie->dbi + PCIE_ATU_LIMIT); |
| 194 | writel((u32)bus_addr, pcie->dbi + PCIE_ATU_LOWER_TARGET); |
| 195 | writel(bus_addr >> 32, pcie->dbi + PCIE_ATU_UPPER_TARGET); |
| 196 | writel(type, pcie->dbi + PCIE_ATU_CR1); |
| 197 | writel(PCIE_ATU_ENABLE, pcie->dbi + PCIE_ATU_CR2); |
| 198 | } |
| 199 | |
| 200 | static void ls_pcie_setup_atu(struct ls_pcie *pcie, struct ls_pcie_info *info) |
| 201 | { |
| 202 | #ifdef DEBUG |
| 203 | int i; |
| 204 | #endif |
| 205 | |
| 206 | /* ATU 0 : OUTBOUND : CFG0 */ |
| 207 | ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX0, |
| 208 | PCIE_ATU_TYPE_CFG0, |
| 209 | info->cfg0_phys, |
| 210 | 0, |
| 211 | info->cfg0_size); |
| 212 | /* ATU 1 : OUTBOUND : CFG1 */ |
| 213 | ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX1, |
| 214 | PCIE_ATU_TYPE_CFG1, |
| 215 | info->cfg1_phys, |
| 216 | 0, |
| 217 | info->cfg1_size); |
| 218 | /* ATU 2 : OUTBOUND : MEM */ |
| 219 | ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX2, |
| 220 | PCIE_ATU_TYPE_MEM, |
| 221 | info->mem_phys, |
| 222 | info->mem_bus, |
| 223 | info->mem_size); |
| 224 | /* ATU 3 : OUTBOUND : IO */ |
| 225 | ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX3, |
| 226 | PCIE_ATU_TYPE_IO, |
| 227 | info->io_phys, |
| 228 | info->io_bus, |
| 229 | info->io_size); |
| 230 | |
| 231 | #ifdef DEBUG |
| 232 | for (i = 0; i <= PCIE_ATU_REGION_INDEX3; i++) { |
| 233 | writel(PCIE_ATU_REGION_OUTBOUND | i, |
| 234 | pcie->dbi + PCIE_ATU_VIEWPORT); |
| 235 | debug("iATU%d:\n", i); |
| 236 | debug("\tLOWER PHYS 0x%08x\n", |
| 237 | readl(pcie->dbi + PCIE_ATU_LOWER_BASE)); |
| 238 | debug("\tUPPER PHYS 0x%08x\n", |
| 239 | readl(pcie->dbi + PCIE_ATU_UPPER_BASE)); |
| 240 | debug("\tLOWER BUS 0x%08x\n", |
| 241 | readl(pcie->dbi + PCIE_ATU_LOWER_TARGET)); |
| 242 | debug("\tUPPER BUS 0x%08x\n", |
| 243 | readl(pcie->dbi + PCIE_ATU_UPPER_TARGET)); |
| 244 | debug("\tLIMIT 0x%08x\n", |
| 245 | readl(pcie->dbi + PCIE_ATU_LIMIT)); |
| 246 | debug("\tCR1 0x%08x\n", |
| 247 | readl(pcie->dbi + PCIE_ATU_CR1)); |
| 248 | debug("\tCR2 0x%08x\n", |
| 249 | readl(pcie->dbi + PCIE_ATU_CR2)); |
| 250 | } |
| 251 | #endif |
| 252 | } |
| 253 | |
| 254 | int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) |
| 255 | { |
| 256 | /* Do not skip controller */ |
| 257 | return 0; |
| 258 | } |
| 259 | |
| 260 | static int ls_pcie_addr_valid(struct pci_controller *hose, pci_dev_t d) |
| 261 | { |
| 262 | if (PCI_DEV(d) > 0) |
| 263 | return -EINVAL; |
| 264 | |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 265 | /* Controller does not support multi-function in RC mode */ |
| 266 | if ((PCI_BUS(d) == hose->first_busno) && (PCI_FUNC(d) > 0)) |
| 267 | return -EINVAL; |
| 268 | |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 269 | return 0; |
| 270 | } |
| 271 | |
| 272 | static int ls_pcie_read_config(struct pci_controller *hose, pci_dev_t d, |
| 273 | int where, u32 *val) |
| 274 | { |
| 275 | struct ls_pcie *pcie = hose->priv_data; |
| 276 | u32 busdev, *addr; |
| 277 | |
| 278 | if (ls_pcie_addr_valid(hose, d)) { |
| 279 | *val = 0xffffffff; |
| 280 | return -EINVAL; |
| 281 | } |
| 282 | |
| 283 | if (PCI_BUS(d) == hose->first_busno) { |
| 284 | addr = pcie->dbi + (where & ~0x3); |
| 285 | } else { |
| 286 | busdev = PCIE_ATU_BUS(PCI_BUS(d)) | |
| 287 | PCIE_ATU_DEV(PCI_DEV(d)) | |
| 288 | PCIE_ATU_FUNC(PCI_FUNC(d)); |
| 289 | |
| 290 | if (PCI_BUS(d) == hose->first_busno + 1) { |
| 291 | ls_pcie_cfg0_set_busdev(pcie, busdev); |
| 292 | addr = pcie->va_cfg0 + (where & ~0x3); |
| 293 | } else { |
| 294 | ls_pcie_cfg1_set_busdev(pcie, busdev); |
| 295 | addr = pcie->va_cfg1 + (where & ~0x3); |
| 296 | } |
| 297 | } |
| 298 | |
| 299 | *val = readl(addr); |
| 300 | |
| 301 | return 0; |
| 302 | } |
| 303 | |
| 304 | static int ls_pcie_write_config(struct pci_controller *hose, pci_dev_t d, |
| 305 | int where, u32 val) |
| 306 | { |
| 307 | struct ls_pcie *pcie = hose->priv_data; |
| 308 | u32 busdev, *addr; |
| 309 | |
| 310 | if (ls_pcie_addr_valid(hose, d)) |
| 311 | return -EINVAL; |
| 312 | |
| 313 | if (PCI_BUS(d) == hose->first_busno) { |
| 314 | addr = pcie->dbi + (where & ~0x3); |
| 315 | } else { |
| 316 | busdev = PCIE_ATU_BUS(PCI_BUS(d)) | |
| 317 | PCIE_ATU_DEV(PCI_DEV(d)) | |
| 318 | PCIE_ATU_FUNC(PCI_FUNC(d)); |
| 319 | |
| 320 | if (PCI_BUS(d) == hose->first_busno + 1) { |
| 321 | ls_pcie_cfg0_set_busdev(pcie, busdev); |
| 322 | addr = pcie->va_cfg0 + (where & ~0x3); |
| 323 | } else { |
| 324 | ls_pcie_cfg1_set_busdev(pcie, busdev); |
| 325 | addr = pcie->va_cfg1 + (where & ~0x3); |
| 326 | } |
| 327 | } |
| 328 | |
| 329 | writel(val, addr); |
| 330 | |
| 331 | return 0; |
| 332 | } |
| 333 | |
| 334 | static void ls_pcie_setup_ctrl(struct ls_pcie *pcie, |
| 335 | struct ls_pcie_info *info) |
| 336 | { |
| 337 | struct pci_controller *hose = &pcie->hose; |
| 338 | pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); |
| 339 | |
| 340 | ls_pcie_setup_atu(pcie, info); |
| 341 | |
| 342 | pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0); |
| 343 | |
| 344 | /* program correct class for RC */ |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 345 | writel(1, pcie->dbi + PCIE_DBI_RO_WR_EN); |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 346 | pci_hose_write_config_word(hose, dev, PCI_CLASS_DEVICE, |
| 347 | PCI_CLASS_BRIDGE_PCI); |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 348 | #ifndef CONFIG_LS102XA |
| 349 | writel(0, pcie->dbi + PCIE_DBI_RO_WR_EN); |
| 350 | #endif |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 351 | } |
| 352 | |
| 353 | int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info) |
| 354 | { |
| 355 | struct ls_pcie *pcie; |
| 356 | struct pci_controller *hose; |
| 357 | int num = dev - PCIE1; |
| 358 | pci_dev_t pdev = PCI_BDF(busno, 0, 0); |
| 359 | int i, linkup, ep_mode; |
| 360 | u8 header_type; |
| 361 | u16 temp16; |
| 362 | |
| 363 | if (!is_serdes_configured(dev)) { |
| 364 | printf("PCIe%d: disabled\n", num + 1); |
| 365 | return busno; |
| 366 | } |
| 367 | |
| 368 | pcie = malloc(sizeof(*pcie)); |
| 369 | if (!pcie) |
| 370 | return busno; |
| 371 | memset(pcie, 0, sizeof(*pcie)); |
| 372 | |
| 373 | hose = &pcie->hose; |
| 374 | hose->priv_data = pcie; |
| 375 | hose->first_busno = busno; |
| 376 | pcie->idx = num; |
| 377 | pcie->dbi = map_physmem(info->regs, PCIE_DBI_SIZE, MAP_NOCACHE); |
| 378 | pcie->va_cfg0 = map_physmem(info->cfg0_phys, |
| 379 | info->cfg0_size, |
| 380 | MAP_NOCACHE); |
| 381 | pcie->va_cfg1 = map_physmem(info->cfg1_phys, |
| 382 | info->cfg1_size, |
| 383 | MAP_NOCACHE); |
| 384 | |
| 385 | /* outbound memory */ |
| 386 | pci_set_region(&hose->regions[0], |
| 387 | (pci_size_t)info->mem_bus, |
| 388 | (phys_size_t)info->mem_phys, |
| 389 | (pci_size_t)info->mem_size, |
| 390 | PCI_REGION_MEM); |
| 391 | |
| 392 | /* outbound io */ |
| 393 | pci_set_region(&hose->regions[1], |
| 394 | (pci_size_t)info->io_bus, |
| 395 | (phys_size_t)info->io_phys, |
| 396 | (pci_size_t)info->io_size, |
| 397 | PCI_REGION_IO); |
| 398 | |
| 399 | /* System memory space */ |
| 400 | pci_set_region(&hose->regions[2], |
| 401 | CONFIG_SYS_PCI_MEMORY_BUS, |
| 402 | CONFIG_SYS_PCI_MEMORY_PHYS, |
| 403 | CONFIG_SYS_PCI_MEMORY_SIZE, |
| 404 | PCI_REGION_SYS_MEMORY); |
| 405 | |
| 406 | hose->region_count = 3; |
| 407 | |
| 408 | for (i = 0; i < hose->region_count; i++) |
| 409 | debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", |
| 410 | i, |
| 411 | (u64)hose->regions[i].phys_start, |
| 412 | (u64)hose->regions[i].bus_start, |
| 413 | (u64)hose->regions[i].size, |
| 414 | hose->regions[i].flags); |
| 415 | |
| 416 | pci_set_ops(hose, |
| 417 | pci_hose_read_config_byte_via_dword, |
| 418 | pci_hose_read_config_word_via_dword, |
| 419 | ls_pcie_read_config, |
| 420 | pci_hose_write_config_byte_via_dword, |
| 421 | pci_hose_write_config_word_via_dword, |
| 422 | ls_pcie_write_config); |
| 423 | |
| 424 | pci_hose_read_config_byte(hose, pdev, PCI_HEADER_TYPE, &header_type); |
| 425 | ep_mode = (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL; |
| 426 | printf("PCIe%u: %s ", info->pci_num, |
| 427 | ep_mode ? "Endpoint" : "Root Complex"); |
| 428 | |
| 429 | linkup = ls_pcie_link_up(pcie); |
| 430 | |
| 431 | if (!linkup) { |
| 432 | /* Let the user know there's no PCIe link */ |
| 433 | printf("no link, regs @ 0x%lx\n", info->regs); |
| 434 | hose->last_busno = hose->first_busno; |
| 435 | return busno; |
| 436 | } |
| 437 | |
| 438 | /* Print the negotiated PCIe link width */ |
Minghuan Lian | d225527 | 2015-03-12 10:58:49 +0800 | [diff] [blame] | 439 | pci_hose_read_config_word(hose, pdev, PCIE_LINK_STA, &temp16); |
| 440 | printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4, |
| 441 | (temp16 & 0xf), info->regs); |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 442 | |
| 443 | if (ep_mode) |
| 444 | return busno; |
| 445 | |
| 446 | ls_pcie_setup_ctrl(pcie, info); |
| 447 | |
| 448 | pci_register_hose(hose); |
| 449 | |
| 450 | hose->last_busno = pci_hose_scan(hose); |
| 451 | |
| 452 | printf("PCIe%x: Bus %02x - %02x\n", |
| 453 | info->pci_num, hose->first_busno, hose->last_busno); |
| 454 | |
| 455 | return hose->last_busno + 1; |
| 456 | } |
| 457 | |
| 458 | int ls_pcie_init_board(int busno) |
| 459 | { |
| 460 | struct ls_pcie_info info; |
| 461 | |
| 462 | #ifdef CONFIG_PCIE1 |
| 463 | SET_LS_PCIE_INFO(info, 1); |
| 464 | busno = ls_pcie_init_ctrl(busno, PCIE1, &info); |
| 465 | #endif |
| 466 | |
| 467 | #ifdef CONFIG_PCIE2 |
| 468 | SET_LS_PCIE_INFO(info, 2); |
| 469 | busno = ls_pcie_init_ctrl(busno, PCIE2, &info); |
| 470 | #endif |
| 471 | |
| 472 | #ifdef CONFIG_PCIE3 |
| 473 | SET_LS_PCIE_INFO(info, 3); |
| 474 | busno = ls_pcie_init_ctrl(busno, PCIE3, &info); |
| 475 | #endif |
| 476 | |
| 477 | #ifdef CONFIG_PCIE4 |
| 478 | SET_LS_PCIE_INFO(info, 4); |
| 479 | busno = ls_pcie_init_ctrl(busno, PCIE4, &info); |
| 480 | #endif |
| 481 | |
| 482 | return busno; |
| 483 | } |
| 484 | |
| 485 | void pci_init_board(void) |
| 486 | { |
| 487 | ls_pcie_init_board(0); |
| 488 | } |
| 489 | |
Minghuan Lian | a4d6b61 | 2014-10-31 13:43:44 +0800 | [diff] [blame] | 490 | #ifdef CONFIG_OF_BOARD_SETUP |
| 491 | #include <libfdt.h> |
| 492 | #include <fdt_support.h> |
| 493 | |
| 494 | static void ft_pcie_ls_setup(void *blob, const char *pci_compat, |
| 495 | unsigned long ctrl_addr, enum srds_prtcl dev) |
| 496 | { |
| 497 | int off; |
| 498 | |
| 499 | off = fdt_node_offset_by_compat_reg(blob, pci_compat, |
| 500 | (phys_addr_t)ctrl_addr); |
| 501 | if (off < 0) |
| 502 | return; |
| 503 | |
| 504 | if (!is_serdes_configured(dev)) |
| 505 | fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0); |
| 506 | } |
| 507 | |
Minghuan Lian | 0c53524 | 2015-03-12 10:58:48 +0800 | [diff] [blame] | 508 | void ft_pci_setup(void *blob, bd_t *bd) |
Minghuan Lian | a4d6b61 | 2014-10-31 13:43:44 +0800 | [diff] [blame] | 509 | { |
| 510 | #ifdef CONFIG_PCIE1 |
| 511 | ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1); |
| 512 | #endif |
| 513 | |
| 514 | #ifdef CONFIG_PCIE2 |
| 515 | ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2); |
| 516 | #endif |
Minghuan Lian | fdab545 | 2015-01-21 17:29:20 +0800 | [diff] [blame] | 517 | |
| 518 | #ifdef CONFIG_PCIE3 |
| 519 | ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE3_ADDR, PCIE3); |
| 520 | #endif |
| 521 | |
| 522 | #ifdef CONFIG_PCIE4 |
| 523 | ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4); |
| 524 | #endif |
Minghuan Lian | a4d6b61 | 2014-10-31 13:43:44 +0800 | [diff] [blame] | 525 | } |
| 526 | |
| 527 | #else |
Minghuan Lian | 0c53524 | 2015-03-12 10:58:48 +0800 | [diff] [blame] | 528 | void ft_pci_setup(void *blob, bd_t *bd) |
Minghuan Lian | a4d6b61 | 2014-10-31 13:43:44 +0800 | [diff] [blame] | 529 | { |
| 530 | } |
| 531 | #endif |
Stuart Yoder | eaea504 | 2015-07-02 11:29:04 +0530 | [diff] [blame^] | 532 | |
| 533 | #ifdef CONFIG_LS2085A |
| 534 | |
| 535 | void pcie_set_available_streamids(void *blob, const char *pcie_path, |
| 536 | u32 *stream_ids, int count) |
| 537 | { |
| 538 | int nodeoffset; |
| 539 | int i; |
| 540 | |
| 541 | nodeoffset = fdt_path_offset(blob, pcie_path); |
| 542 | if (nodeoffset < 0) { |
| 543 | printf("\n%s: ERROR: unable to update PCIe node\n", __func__); |
| 544 | return; |
| 545 | } |
| 546 | |
| 547 | /* for each stream ID, append to mmu-masters */ |
| 548 | for (i = 0; i < count; i++) { |
| 549 | fdt_appendprop_u32(blob, nodeoffset, "available-stream-ids", |
| 550 | stream_ids[i]); |
| 551 | } |
| 552 | } |
| 553 | |
| 554 | #define MAX_STREAM_IDS 4 |
| 555 | void fdt_fixup_smmu_pcie(void *blob) |
| 556 | { |
| 557 | int count; |
| 558 | u32 stream_ids[MAX_STREAM_IDS]; |
| 559 | |
| 560 | #ifdef CONFIG_PCIE1 |
| 561 | /* PEX1 stream ID fixup */ |
| 562 | count = FSL_PEX1_STREAM_ID_END - FSL_PEX1_STREAM_ID_START + 1; |
| 563 | alloc_stream_ids(FSL_PEX1_STREAM_ID_START, count, stream_ids, |
| 564 | MAX_STREAM_IDS); |
| 565 | pcie_set_available_streamids(blob, "/pcie@3400000", stream_ids, count); |
| 566 | #endif |
| 567 | |
| 568 | #ifdef CONFIG_PCIE2 |
| 569 | /* PEX2 stream ID fixup */ |
| 570 | count = FSL_PEX2_STREAM_ID_END - FSL_PEX2_STREAM_ID_START + 1; |
| 571 | alloc_stream_ids(FSL_PEX2_STREAM_ID_START, count, stream_ids, |
| 572 | MAX_STREAM_IDS); |
| 573 | pcie_set_available_streamids(blob, "/pcie@3500000", stream_ids, count); |
| 574 | #endif |
| 575 | |
| 576 | #ifdef CONFIG_PCIE3 |
| 577 | /* PEX3 stream ID fixup */ |
| 578 | count = FSL_PEX3_STREAM_ID_END - FSL_PEX3_STREAM_ID_START + 1; |
| 579 | alloc_stream_ids(FSL_PEX3_STREAM_ID_START, count, stream_ids, |
| 580 | MAX_STREAM_IDS); |
| 581 | pcie_set_available_streamids(blob, "/pcie@3600000", stream_ids, count); |
| 582 | #endif |
| 583 | |
| 584 | #ifdef CONFIG_PCIE4 |
| 585 | /* PEX4 stream ID fixup */ |
| 586 | count = FSL_PEX4_STREAM_ID_END - FSL_PEX4_STREAM_ID_START + 1; |
| 587 | alloc_stream_ids(FSL_PEX4_STREAM_ID_START, count, stream_ids, |
| 588 | MAX_STREAM_IDS); |
| 589 | pcie_set_available_streamids(blob, "/pcie@3700000", stream_ids, count); |
| 590 | #endif |
| 591 | } |
| 592 | #endif |