blob: b3349af9e184cc05477494be00e4dd1d566318ac [file] [log] [blame]
Masahiro Yamada4e82e5e2015-01-13 12:44:37 +09001/*
Masahiro Yamada663a23f2015-05-29 17:30:00 +09002 * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada4e82e5e2015-01-13 12:44:37 +09003 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#include <common.h>
8#include <linux/types.h>
Masahiro Yamada663a23f2015-05-29 17:30:00 +09009#include <linux/io.h>
Masahiro Yamada4e82e5e2015-01-13 12:44:37 +090010#include <asm/errno.h>
11#include <dm/device.h>
12#include <dm/root.h>
13#include <i2c.h>
14#include <fdtdec.h>
Joe Hershberger65b905b2015-03-22 17:08:59 -050015#include <mapmem.h>
Masahiro Yamada4e82e5e2015-01-13 12:44:37 +090016
17DECLARE_GLOBAL_DATA_PTR;
18
19struct uniphier_fi2c_regs {
20 u32 cr; /* control register */
21#define I2C_CR_MST (1 << 3) /* master mode */
22#define I2C_CR_STA (1 << 2) /* start condition */
23#define I2C_CR_STO (1 << 1) /* stop condition */
24#define I2C_CR_NACK (1 << 0) /* not ACK */
25 u32 dttx; /* send FIFO (write-only) */
26#define dtrx dttx /* receive FIFO (read-only) */
27#define I2C_DTTX_CMD (1 << 8) /* send command (slave addr) */
28#define I2C_DTTX_RD (1 << 0) /* read */
29 u32 __reserved; /* no register at offset 0x08 */
30 u32 slad; /* slave address */
31 u32 cyc; /* clock cycle control */
32 u32 lctl; /* clock low period control */
33 u32 ssut; /* restart/stop setup time control */
34 u32 dsut; /* data setup time control */
35 u32 intr; /* interrupt status */
36 u32 ie; /* interrupt enable */
37 u32 ic; /* interrupt clear */
38#define I2C_INT_TE (1 << 9) /* TX FIFO empty */
39#define I2C_INT_RB (1 << 4) /* received specified bytes */
40#define I2C_INT_NA (1 << 2) /* no answer */
41#define I2C_INT_AL (1 << 1) /* arbitration lost */
42 u32 sr; /* status register */
43#define I2C_SR_DB (1 << 12) /* device busy */
44#define I2C_SR_BB (1 << 8) /* bus busy */
45#define I2C_SR_RFF (1 << 3) /* Rx FIFO full */
46#define I2C_SR_RNE (1 << 2) /* Rx FIFO not empty */
47#define I2C_SR_TNF (1 << 1) /* Tx FIFO not full */
48#define I2C_SR_TFE (1 << 0) /* Tx FIFO empty */
49 u32 __reserved2; /* no register at offset 0x30 */
50 u32 rst; /* reset control */
51#define I2C_RST_TBRST (1 << 2) /* clear Tx FIFO */
52#define I2C_RST_RBRST (1 << 1) /* clear Rx FIFO */
53#define I2C_RST_RST (1 << 0) /* forcible bus reset */
54 u32 bm; /* bus monitor */
55 u32 noise; /* noise filter control */
56 u32 tbc; /* Tx byte count setting */
57 u32 rbc; /* Rx byte count setting */
58 u32 tbcm; /* Tx byte count monitor */
59 u32 rbcm; /* Rx byte count monitor */
60 u32 brst; /* bus reset */
61#define I2C_BRST_FOEN (1 << 1) /* normal operation */
62#define I2C_BRST_RSCLO (1 << 0) /* release SCL low fixing */
63};
64
65#define FIOCLK 50000000
66
67struct uniphier_fi2c_dev {
68 struct uniphier_fi2c_regs __iomem *regs; /* register base */
69 unsigned long fioclk; /* internal operation clock */
70 unsigned long timeout; /* time out (us) */
71};
72
73static int poll_status(u32 __iomem *reg, u32 flag)
74{
75 int wait = 1000000; /* 1 sec is long enough */
76
77 while (readl(reg) & flag) {
78 if (wait-- < 0)
79 return -EREMOTEIO;
80 udelay(1);
81 }
82
83 return 0;
84}
85
86static int reset_bus(struct uniphier_fi2c_regs __iomem *regs)
87{
88 int ret;
89
90 /* bus forcible reset */
91 writel(I2C_RST_RST, &regs->rst);
92 ret = poll_status(&regs->rst, I2C_RST_RST);
93 if (ret < 0)
94 debug("error: fail to reset I2C controller\n");
95
96 return ret;
97}
98
99static int check_device_busy(struct uniphier_fi2c_regs __iomem *regs)
100{
101 int ret;
102
103 ret = poll_status(&regs->sr, I2C_SR_DB);
104 if (ret < 0) {
105 debug("error: device busy too long. reset...\n");
106 ret = reset_bus(regs);
107 }
108
109 return ret;
110}
111
112static int uniphier_fi2c_probe(struct udevice *dev)
113{
114 fdt_addr_t addr;
115 fdt_size_t size;
116 struct uniphier_fi2c_dev *priv = dev_get_priv(dev);
117 int ret;
118
119 addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg",
120 &size);
121
122 priv->regs = map_sysmem(addr, size);
123
124 if (!priv->regs)
125 return -ENOMEM;
126
127 priv->fioclk = FIOCLK;
128
129 /* bus forcible reset */
130 ret = reset_bus(priv->regs);
131 if (ret < 0)
132 return ret;
133
134 writel(I2C_BRST_FOEN | I2C_BRST_RSCLO, &priv->regs->brst);
135
136 return 0;
137}
138
139static int uniphier_fi2c_remove(struct udevice *dev)
140{
141 struct uniphier_fi2c_dev *priv = dev_get_priv(dev);
142
143 unmap_sysmem(priv->regs);
144
145 return 0;
146}
147
Masahiro Yamada4e82e5e2015-01-13 12:44:37 +0900148static int wait_for_irq(struct uniphier_fi2c_dev *dev, u32 flags,
149 bool *stop)
150{
151 u32 irq;
152 unsigned long wait = dev->timeout;
153 int ret = -EREMOTEIO;
154
155 do {
156 udelay(1);
157 irq = readl(&dev->regs->intr);
158 } while (!(irq & flags) && wait--);
159
160 if (wait < 0) {
161 debug("error: time out\n");
162 return ret;
163 }
164
165 if (irq & I2C_INT_AL) {
166 debug("error: arbitration lost\n");
167 *stop = false;
168 return ret;
169 }
170
171 if (irq & I2C_INT_NA) {
172 debug("error: no answer\n");
173 return ret;
174 }
175
176 return 0;
177}
178
179static int issue_stop(struct uniphier_fi2c_dev *dev, int old_ret)
180{
181 int ret;
182
183 debug("stop condition\n");
184 writel(I2C_CR_MST | I2C_CR_STO, &dev->regs->cr);
185
186 ret = poll_status(&dev->regs->sr, I2C_SR_DB);
187 if (ret < 0)
188 debug("error: device busy after operation\n");
189
190 return old_ret ? old_ret : ret;
191}
192
193static int uniphier_fi2c_transmit(struct uniphier_fi2c_dev *dev, uint addr,
194 uint len, const u8 *buf, bool *stop)
195{
196 int ret;
197 const u32 irq_flags = I2C_INT_TE | I2C_INT_NA | I2C_INT_AL;
198 struct uniphier_fi2c_regs __iomem *regs = dev->regs;
199
200 debug("%s: addr = %x, len = %d\n", __func__, addr, len);
201
202 writel(I2C_DTTX_CMD | addr << 1, &regs->dttx);
203
204 writel(irq_flags, &regs->ie);
205 writel(irq_flags, &regs->ic);
206
207 debug("start condition\n");
208 writel(I2C_CR_MST | I2C_CR_STA, &regs->cr);
209
210 ret = wait_for_irq(dev, irq_flags, stop);
211 if (ret < 0)
212 goto error;
213
214 while (len--) {
215 debug("sending %x\n", *buf);
216 writel(*buf++, &regs->dttx);
217
218 writel(irq_flags, &regs->ic);
219
220 ret = wait_for_irq(dev, irq_flags, stop);
221 if (ret < 0)
222 goto error;
223 }
224
225error:
226 writel(irq_flags, &regs->ic);
227
228 if (*stop)
229 ret = issue_stop(dev, ret);
230
231 return ret;
232}
233
234static int uniphier_fi2c_receive(struct uniphier_fi2c_dev *dev, uint addr,
235 uint len, u8 *buf, bool *stop)
236{
237 int ret = 0;
238 const u32 irq_flags = I2C_INT_RB | I2C_INT_NA | I2C_INT_AL;
239 struct uniphier_fi2c_regs __iomem *regs = dev->regs;
240
241 debug("%s: addr = %x, len = %d\n", __func__, addr, len);
242
243 /*
244 * In case 'len == 0', only the slave address should be sent
245 * for probing, which is covered by the transmit function.
246 */
247 if (len == 0)
248 return uniphier_fi2c_transmit(dev, addr, len, buf, stop);
249
250 writel(I2C_DTTX_CMD | I2C_DTTX_RD | addr << 1, &regs->dttx);
251
252 writel(0, &regs->rbc);
253 writel(irq_flags, &regs->ie);
254 writel(irq_flags, &regs->ic);
255
256 debug("start condition\n");
257 writel(I2C_CR_MST | I2C_CR_STA | (len == 1 ? I2C_CR_NACK : 0),
258 &regs->cr);
259
260 while (len--) {
261 ret = wait_for_irq(dev, irq_flags, stop);
262 if (ret < 0)
263 goto error;
264
265 *buf++ = readl(&regs->dtrx);
266 debug("received %x\n", *(buf - 1));
267
268 if (len == 1)
269 writel(I2C_CR_MST | I2C_CR_NACK, &regs->cr);
270
271 writel(irq_flags, &regs->ic);
272 }
273
274error:
275 writel(irq_flags, &regs->ic);
276
277 if (*stop)
278 ret = issue_stop(dev, ret);
279
280 return ret;
281}
282
283static int uniphier_fi2c_xfer(struct udevice *bus, struct i2c_msg *msg,
284 int nmsgs)
285{
286 int ret;
287 struct uniphier_fi2c_dev *dev = dev_get_priv(bus);
288 bool stop;
289
290 ret = check_device_busy(dev->regs);
291 if (ret < 0)
292 return ret;
293
294 for (; nmsgs > 0; nmsgs--, msg++) {
295 /* If next message is read, skip the stop condition */
296 stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true;
297
298 if (msg->flags & I2C_M_RD)
299 ret = uniphier_fi2c_receive(dev, msg->addr, msg->len,
300 msg->buf, &stop);
301 else
302 ret = uniphier_fi2c_transmit(dev, msg->addr, msg->len,
303 msg->buf, &stop);
304
305 if (ret < 0)
306 break;
307 }
308
309 return ret;
310}
311
312static int uniphier_fi2c_set_bus_speed(struct udevice *bus, unsigned int speed)
313{
314 int ret;
315 unsigned int clk_count;
316 struct uniphier_fi2c_dev *dev = dev_get_priv(bus);
317 struct uniphier_fi2c_regs __iomem *regs = dev->regs;
318
319 /* max supported frequency is 400 kHz */
320 if (speed > 400000)
321 return -EINVAL;
322
323 ret = check_device_busy(dev->regs);
324 if (ret < 0)
325 return ret;
326
327 /* make sure the bus is idle when changing the frequency */
328 writel(I2C_BRST_RSCLO, &regs->brst);
329
330 clk_count = dev->fioclk / speed;
331
332 writel(clk_count, &regs->cyc);
333 writel(clk_count / 2, &regs->lctl);
334 writel(clk_count / 2, &regs->ssut);
335 writel(clk_count / 16, &regs->dsut);
336
337 writel(I2C_BRST_FOEN | I2C_BRST_RSCLO, &regs->brst);
338
339 /*
340 * Theoretically, each byte can be transferred in
341 * 1000000 * 9 / speed usec.
342 * This time out value is long enough.
343 */
344 dev->timeout = 100000000L / speed;
345
346 return 0;
347}
348
349static const struct dm_i2c_ops uniphier_fi2c_ops = {
350 .xfer = uniphier_fi2c_xfer,
351 .set_bus_speed = uniphier_fi2c_set_bus_speed,
352};
353
354static const struct udevice_id uniphier_fi2c_of_match[] = {
Masahiro Yamadad5f83a42015-03-11 15:54:46 +0900355 { .compatible = "socionext,uniphier-fi2c" },
356 { /* sentinel */ }
Masahiro Yamada4e82e5e2015-01-13 12:44:37 +0900357};
358
359U_BOOT_DRIVER(uniphier_fi2c) = {
360 .name = "uniphier-fi2c",
361 .id = UCLASS_I2C,
362 .of_match = uniphier_fi2c_of_match,
363 .probe = uniphier_fi2c_probe,
364 .remove = uniphier_fi2c_remove,
Masahiro Yamada4e82e5e2015-01-13 12:44:37 +0900365 .priv_auto_alloc_size = sizeof(struct uniphier_fi2c_dev),
366 .ops = &uniphier_fi2c_ops,
367};