blob: f9095739b0f0bd93d17020ad67d9131dc634b88f [file] [log] [blame]
Pavel Machekc7213802014-09-08 14:08:45 +02001/*
2 * Copyright (C) 2012 Altera Corporation <www.altera.com>
3 * All rights reserved.
4 *
5 * This file contains only support functions used also by the SoCFPGA
6 * platform code, the real meat is located in drivers/fpga/socfpga.c .
7 *
8 * SPDX-License-Identifier: BSD-3-Clause
9 */
10
11#include <common.h>
12#include <asm/io.h>
Masahiro Yamada56a931c2016-09-21 11:28:55 +090013#include <linux/errno.h>
Pavel Machekc7213802014-09-08 14:08:45 +020014#include <asm/arch/fpga_manager.h>
15#include <asm/arch/reset_manager.h>
16#include <asm/arch/system_manager.h>
17
18DECLARE_GLOBAL_DATA_PTR;
19
20/* Timeout count */
21#define FPGA_TIMEOUT_CNT 0x1000000
22
23static struct socfpga_fpga_manager *fpgamgr_regs =
24 (struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
25
26/* Check whether FPGA Init_Done signal is high */
27static int is_fpgamgr_initdone_high(void)
28{
29 unsigned long val;
30
31 val = readl(&fpgamgr_regs->gpio_ext_porta);
32 return val & FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK;
33}
34
35/* Get the FPGA mode */
36int fpgamgr_get_mode(void)
37{
38 unsigned long val;
39
40 val = readl(&fpgamgr_regs->stat);
41 return val & FPGAMGRREGS_STAT_MODE_MASK;
42}
43
44/* Check whether FPGA is ready to be accessed */
45int fpgamgr_test_fpga_ready(void)
46{
47 /* Check for init done signal */
48 if (!is_fpgamgr_initdone_high())
49 return 0;
50
51 /* Check again to avoid false glitches */
52 if (!is_fpgamgr_initdone_high())
53 return 0;
54
55 if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_USERMODE)
56 return 0;
57
58 return 1;
59}
60
61/* Poll until FPGA is ready to be accessed or timeout occurred */
62int fpgamgr_poll_fpga_ready(void)
63{
64 unsigned long i;
65
66 /* If FPGA is blank, wait till WD invoke warm reset */
67 for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
68 /* check for init done signal */
69 if (!is_fpgamgr_initdone_high())
70 continue;
71 /* check again to avoid false glitches */
72 if (!is_fpgamgr_initdone_high())
73 continue;
74 return 1;
75 }
76
77 return 0;
78}