Dirk Eibach | b957743 | 2014-07-03 09:28:18 +0200 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2013 |
| 3 | * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <i2c.h> |
| 10 | #include <gdsys_fpga.h> |
| 11 | |
| 12 | DECLARE_GLOBAL_DATA_PTR; |
| 13 | |
| 14 | enum { |
| 15 | I2CINT_ERROR_EV = 1 << 13, |
| 16 | I2CINT_TRANSMIT_EV = 1 << 14, |
| 17 | I2CINT_RECEIVE_EV = 1 << 15, |
| 18 | }; |
| 19 | |
| 20 | enum { |
| 21 | I2CMB_WRITE = 1 << 10, |
| 22 | I2CMB_2BYTE = 1 << 11, |
| 23 | I2CMB_HOLD_BUS = 1 << 13, |
| 24 | I2CMB_NATIVE = 2 << 14, |
| 25 | }; |
| 26 | |
| 27 | static int wait_for_int(bool read) |
| 28 | { |
| 29 | u16 val; |
| 30 | unsigned int ctr = 0; |
| 31 | |
| 32 | FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); |
| 33 | while (!(val & (I2CINT_ERROR_EV |
| 34 | | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) { |
| 35 | udelay(10); |
| 36 | if (ctr++ > 5000) { |
Dirk Eibach | b957743 | 2014-07-03 09:28:18 +0200 | [diff] [blame] | 37 | return 1; |
| 38 | } |
| 39 | FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); |
| 40 | } |
| 41 | |
| 42 | return (val & I2CINT_ERROR_EV) ? 1 : 0; |
| 43 | } |
| 44 | |
| 45 | static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, |
| 46 | bool is_last) |
| 47 | { |
| 48 | u16 val; |
| 49 | |
| 50 | FPGA_SET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, I2CINT_ERROR_EV |
| 51 | | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV); |
| 52 | FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); |
| 53 | |
| 54 | if (!read && len) { |
| 55 | val = buffer[0]; |
| 56 | |
| 57 | if (len > 1) |
| 58 | val |= buffer[1] << 8; |
| 59 | FPGA_SET_REG(I2C_ADAP_HWNR, i2c.write_mailbox_ext, val); |
| 60 | } |
| 61 | |
| 62 | FPGA_SET_REG(I2C_ADAP_HWNR, i2c.write_mailbox, |
| 63 | I2CMB_NATIVE |
| 64 | | (read ? 0 : I2CMB_WRITE) |
| 65 | | (chip << 1) |
| 66 | | ((len > 1) ? I2CMB_2BYTE : 0) |
| 67 | | (is_last ? 0 : I2CMB_HOLD_BUS)); |
| 68 | |
| 69 | if (wait_for_int(read)) |
| 70 | return 1; |
| 71 | |
| 72 | if (read) { |
| 73 | FPGA_GET_REG(I2C_ADAP_HWNR, i2c.read_mailbox_ext, &val); |
| 74 | buffer[0] = val & 0xff; |
| 75 | if (len > 1) |
| 76 | buffer[1] = val >> 8; |
| 77 | } |
| 78 | |
| 79 | return 0; |
| 80 | } |
| 81 | |
| 82 | static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus) |
| 83 | { |
| 84 | int shift = (alen-1) * 8; |
| 85 | |
| 86 | while (alen) { |
Masahiro Yamada | b62b39b | 2014-09-18 13:28:06 +0900 | [diff] [blame] | 87 | int transfer = min(alen, 2); |
Dirk Eibach | b957743 | 2014-07-03 09:28:18 +0200 | [diff] [blame] | 88 | uchar buf[2]; |
| 89 | bool is_last = alen <= transfer; |
| 90 | |
| 91 | buf[0] = addr >> shift; |
| 92 | if (alen > 1) |
| 93 | buf[1] = addr >> (shift - 8); |
| 94 | |
| 95 | if (ihs_i2c_transfer(chip, buf, transfer, false, |
| 96 | hold_bus ? false : is_last)) |
| 97 | return 1; |
| 98 | |
| 99 | shift -= 16; |
| 100 | alen -= transfer; |
| 101 | } |
| 102 | |
| 103 | return 0; |
| 104 | } |
| 105 | |
| 106 | static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr, |
| 107 | int alen, uchar *buffer, int len, bool read) |
| 108 | { |
| 109 | if (len <= 0) |
| 110 | return 1; |
| 111 | |
| 112 | if (ihs_i2c_address(chip, addr, alen, !read)) |
| 113 | return 1; |
| 114 | |
| 115 | while (len) { |
Masahiro Yamada | b62b39b | 2014-09-18 13:28:06 +0900 | [diff] [blame] | 116 | int transfer = min(len, 2); |
Dirk Eibach | b957743 | 2014-07-03 09:28:18 +0200 | [diff] [blame] | 117 | |
| 118 | if (ihs_i2c_transfer(chip, buffer, transfer, read, |
| 119 | len <= transfer)) |
| 120 | return 1; |
| 121 | |
| 122 | buffer += transfer; |
| 123 | addr += transfer; |
| 124 | len -= transfer; |
| 125 | } |
| 126 | |
| 127 | return 0; |
| 128 | } |
| 129 | |
| 130 | |
| 131 | static void ihs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) |
| 132 | { |
| 133 | #ifdef CONFIG_SYS_I2C_INIT_BOARD |
| 134 | /* |
| 135 | * Call board specific i2c bus reset routine before accessing the |
| 136 | * environment, which might be in a chip on that bus. For details |
| 137 | * about this problem see doc/I2C_Edge_Conditions. |
| 138 | */ |
| 139 | i2c_init_board(); |
| 140 | #endif |
| 141 | } |
| 142 | |
| 143 | static int ihs_i2c_probe(struct i2c_adapter *adap, uchar chip) |
| 144 | { |
| 145 | uchar buffer[2]; |
| 146 | |
| 147 | if (ihs_i2c_transfer(chip, buffer, 0, true, true)) |
| 148 | return 1; |
| 149 | |
| 150 | return 0; |
| 151 | } |
| 152 | |
| 153 | static int ihs_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, |
| 154 | int alen, uchar *buffer, int len) |
| 155 | { |
| 156 | return ihs_i2c_access(adap, chip, addr, alen, buffer, len, true); |
| 157 | } |
| 158 | |
| 159 | static int ihs_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, |
| 160 | int alen, uchar *buffer, int len) |
| 161 | { |
| 162 | return ihs_i2c_access(adap, chip, addr, alen, buffer, len, false); |
| 163 | } |
| 164 | |
| 165 | static unsigned int ihs_i2c_set_bus_speed(struct i2c_adapter *adap, |
| 166 | unsigned int speed) |
| 167 | { |
| 168 | if (speed != adap->speed) |
| 169 | return 1; |
| 170 | return speed; |
| 171 | } |
| 172 | |
| 173 | /* |
| 174 | * Register IHS i2c adapters |
| 175 | */ |
| 176 | #ifdef CONFIG_SYS_I2C_IHS_CH0 |
| 177 | U_BOOT_I2C_ADAP_COMPLETE(ihs0, ihs_i2c_init, ihs_i2c_probe, |
| 178 | ihs_i2c_read, ihs_i2c_write, |
| 179 | ihs_i2c_set_bus_speed, |
| 180 | CONFIG_SYS_I2C_IHS_SPEED_0, |
| 181 | CONFIG_SYS_I2C_IHS_SLAVE_0, 0) |
| 182 | #endif |
| 183 | #ifdef CONFIG_SYS_I2C_IHS_CH1 |
| 184 | U_BOOT_I2C_ADAP_COMPLETE(ihs1, ihs_i2c_init, ihs_i2c_probe, |
| 185 | ihs_i2c_read, ihs_i2c_write, |
| 186 | ihs_i2c_set_bus_speed, |
| 187 | CONFIG_SYS_I2C_IHS_SPEED_1, |
| 188 | CONFIG_SYS_I2C_IHS_SLAVE_1, 1) |
| 189 | #endif |
| 190 | #ifdef CONFIG_SYS_I2C_IHS_CH2 |
| 191 | U_BOOT_I2C_ADAP_COMPLETE(ihs2, ihs_i2c_init, ihs_i2c_probe, |
| 192 | ihs_i2c_read, ihs_i2c_write, |
| 193 | ihs_i2c_set_bus_speed, |
| 194 | CONFIG_SYS_I2C_IHS_SPEED_2, |
| 195 | CONFIG_SYS_I2C_IHS_SLAVE_2, 2) |
| 196 | #endif |
| 197 | #ifdef CONFIG_SYS_I2C_IHS_CH3 |
| 198 | U_BOOT_I2C_ADAP_COMPLETE(ihs3, ihs_i2c_init, ihs_i2c_probe, |
| 199 | ihs_i2c_read, ihs_i2c_write, |
| 200 | ihs_i2c_set_bus_speed, |
| 201 | CONFIG_SYS_I2C_IHS_SPEED_3, |
| 202 | CONFIG_SYS_I2C_IHS_SLAVE_3, 3) |
| 203 | #endif |