Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Przemyslaw Marczak | d8c1562 | 2015-10-27 13:08:01 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2015 Samsung Electronics |
| 4 | * Przemyslaw Marczak <p.marczak@samsung.com> |
Przemyslaw Marczak | d8c1562 | 2015-10-27 13:08:01 +0100 | [diff] [blame] | 5 | */ |
| 6 | #include <common.h> |
| 7 | #include <errno.h> |
| 8 | #include <dm.h> |
| 9 | #include <adc.h> |
| 10 | #include <asm/arch/adc.h> |
| 11 | |
| 12 | struct exynos_adc_priv { |
| 13 | int active_channel; |
| 14 | struct exynos_adc_v2 *regs; |
| 15 | }; |
| 16 | |
| 17 | int exynos_adc_channel_data(struct udevice *dev, int channel, |
| 18 | unsigned int *data) |
| 19 | { |
| 20 | struct exynos_adc_priv *priv = dev_get_priv(dev); |
| 21 | struct exynos_adc_v2 *regs = priv->regs; |
| 22 | |
| 23 | if (channel != priv->active_channel) { |
Masahiro Yamada | 81e1042 | 2017-09-16 14:10:41 +0900 | [diff] [blame] | 24 | pr_err("Requested channel is not active!"); |
Przemyslaw Marczak | d8c1562 | 2015-10-27 13:08:01 +0100 | [diff] [blame] | 25 | return -EINVAL; |
| 26 | } |
| 27 | |
| 28 | if (ADC_V2_GET_STATUS_FLAG(readl(®s->status)) != FLAG_CONV_END) |
| 29 | return -EBUSY; |
| 30 | |
| 31 | *data = readl(®s->dat) & ADC_V2_DAT_MASK; |
| 32 | |
| 33 | return 0; |
| 34 | } |
| 35 | |
| 36 | int exynos_adc_start_channel(struct udevice *dev, int channel) |
| 37 | { |
| 38 | struct exynos_adc_priv *priv = dev_get_priv(dev); |
| 39 | struct exynos_adc_v2 *regs = priv->regs; |
| 40 | unsigned int cfg; |
| 41 | |
| 42 | /* Choose channel */ |
| 43 | cfg = readl(®s->con2); |
| 44 | cfg &= ~ADC_V2_CON2_CHAN_SEL_MASK; |
| 45 | cfg |= ADC_V2_CON2_CHAN_SEL(channel); |
| 46 | writel(cfg, ®s->con2); |
| 47 | |
| 48 | /* Start conversion */ |
| 49 | cfg = readl(®s->con1); |
| 50 | writel(cfg | ADC_V2_CON1_STC_EN, ®s->con1); |
| 51 | |
| 52 | priv->active_channel = channel; |
| 53 | |
| 54 | return 0; |
| 55 | } |
| 56 | |
| 57 | int exynos_adc_stop(struct udevice *dev) |
| 58 | { |
| 59 | struct exynos_adc_priv *priv = dev_get_priv(dev); |
| 60 | struct exynos_adc_v2 *regs = priv->regs; |
| 61 | unsigned int cfg; |
| 62 | |
| 63 | /* Stop conversion */ |
| 64 | cfg = readl(®s->con1); |
Krzysztof Kozlowski | 0ca1c29 | 2019-03-06 19:37:49 +0100 | [diff] [blame] | 65 | cfg &= ~ADC_V2_CON1_STC_EN; |
Przemyslaw Marczak | d8c1562 | 2015-10-27 13:08:01 +0100 | [diff] [blame] | 66 | |
| 67 | writel(cfg, ®s->con1); |
| 68 | |
| 69 | priv->active_channel = -1; |
| 70 | |
| 71 | return 0; |
| 72 | } |
| 73 | |
| 74 | int exynos_adc_probe(struct udevice *dev) |
| 75 | { |
| 76 | struct exynos_adc_priv *priv = dev_get_priv(dev); |
| 77 | struct exynos_adc_v2 *regs = priv->regs; |
| 78 | unsigned int cfg; |
| 79 | |
| 80 | /* Check HW version */ |
| 81 | if (readl(®s->version) != ADC_V2_VERSION) { |
Masahiro Yamada | 81e1042 | 2017-09-16 14:10:41 +0900 | [diff] [blame] | 82 | pr_err("This driver supports only ADC v2!"); |
Przemyslaw Marczak | d8c1562 | 2015-10-27 13:08:01 +0100 | [diff] [blame] | 83 | return -ENXIO; |
| 84 | } |
| 85 | |
| 86 | /* ADC Reset */ |
| 87 | writel(ADC_V2_CON1_SOFT_RESET, ®s->con1); |
| 88 | |
| 89 | /* Disable INT - will read status only */ |
| 90 | writel(0x0, ®s->int_en); |
| 91 | |
| 92 | /* CON2 - set conversion parameters */ |
| 93 | cfg = ADC_V2_CON2_C_TIME(3); /* Conversion times: (1 << 3) = 8 */ |
| 94 | cfg |= ADC_V2_CON2_OSEL(OSEL_BINARY); |
| 95 | cfg |= ADC_V2_CON2_ESEL(ESEL_ADC_EVAL_TIME_20CLK); |
| 96 | cfg |= ADC_V2_CON2_HIGHF(HIGHF_CONV_RATE_600KSPS); |
| 97 | writel(cfg, ®s->con2); |
| 98 | |
| 99 | priv->active_channel = -1; |
| 100 | |
| 101 | return 0; |
| 102 | } |
| 103 | |
| 104 | int exynos_adc_ofdata_to_platdata(struct udevice *dev) |
| 105 | { |
| 106 | struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); |
| 107 | struct exynos_adc_priv *priv = dev_get_priv(dev); |
| 108 | |
Masahiro Yamada | 1096ae1 | 2020-07-17 14:36:46 +0900 | [diff] [blame] | 109 | priv->regs = dev_read_addr_ptr(dev); |
Przemyslaw Marczak | d8c1562 | 2015-10-27 13:08:01 +0100 | [diff] [blame] | 110 | if (priv->regs == (struct exynos_adc_v2 *)FDT_ADDR_T_NONE) { |
Masahiro Yamada | 81e1042 | 2017-09-16 14:10:41 +0900 | [diff] [blame] | 111 | pr_err("Dev: %s - can't get address!", dev->name); |
Przemyslaw Marczak | d8c1562 | 2015-10-27 13:08:01 +0100 | [diff] [blame] | 112 | return -ENODATA; |
| 113 | } |
| 114 | |
| 115 | uc_pdata->data_mask = ADC_V2_DAT_MASK; |
| 116 | uc_pdata->data_format = ADC_DATA_FORMAT_BIN; |
| 117 | uc_pdata->data_timeout_us = ADC_V2_CONV_TIMEOUT_US; |
| 118 | |
| 119 | /* Mask available channel bits: [0:9] */ |
| 120 | uc_pdata->channel_mask = (2 << ADC_V2_MAX_CHANNEL) - 1; |
| 121 | |
| 122 | return 0; |
| 123 | } |
| 124 | |
| 125 | static const struct adc_ops exynos_adc_ops = { |
| 126 | .start_channel = exynos_adc_start_channel, |
| 127 | .channel_data = exynos_adc_channel_data, |
| 128 | .stop = exynos_adc_stop, |
| 129 | }; |
| 130 | |
| 131 | static const struct udevice_id exynos_adc_ids[] = { |
| 132 | { .compatible = "samsung,exynos-adc-v2" }, |
| 133 | { } |
| 134 | }; |
| 135 | |
| 136 | U_BOOT_DRIVER(exynos_adc) = { |
| 137 | .name = "exynos-adc", |
| 138 | .id = UCLASS_ADC, |
| 139 | .of_match = exynos_adc_ids, |
| 140 | .ops = &exynos_adc_ops, |
| 141 | .probe = exynos_adc_probe, |
| 142 | .ofdata_to_platdata = exynos_adc_ofdata_to_platdata, |
| 143 | .priv_auto_alloc_size = sizeof(struct exynos_adc_priv), |
| 144 | }; |