blob: b938b86ba8f0cc178fbf4042c8d5c6f67cf74b82 [file] [log] [blame]
Simon Glasse8045012014-11-14 18:18:43 -07001/*
2 * From Coreboot file of same name
3 *
4 * Copyright (C) 2007-2009 coresystems GmbH
5 * 2012 secunet Security Networks AG
6 *
7 * SPDX-License-Identifier: GPL-2.0
8 */
9
10#ifndef _ASM_SPEEDSTEP_H
11#define _ASM_SPEEDSTEP_H
12
13/* Magic value used to locate speedstep configuration in the device tree */
14#define SPEEDSTEP_APIC_MAGIC 0xACAC
15
16/* MWAIT coordination I/O base address. This must match
17 * the \_PR_.CPU0 PM base address.
18 */
19#define PMB0_BASE 0x510
20
21/* PMB1: I/O port that triggers SMI once cores are in the same state.
22 * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
23 */
24#define PMB1_BASE 0x800
25
26struct sst_state {
27 uint8_t dynfsb:1; /* whether this is SLFM */
28 uint8_t nonint:1; /* add .5 to ratio */
29 uint8_t ratio:6;
30 uint8_t vid;
31 uint8_t is_turbo;
32 uint8_t is_slfm;
33 uint32_t power;
34};
35#define SPEEDSTEP_RATIO_SHIFT 8
36#define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT)
37#define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
38#define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT)
39#define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
40#define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT)
41#define SPEEDSTEP_VID_MASK 0x3f
42#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){ \
43 0, /* dynfsb won't be read. */ \
44 ((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \
45 (((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \
46 >> SPEEDSTEP_RATIO_SHIFT), \
47 (val & mask) & SPEEDSTEP_VID_MASK, \
48 0, /* not turbo by default */ \
49 0, /* not slfm by default */ \
50 0 /* power is hardcoded in software. */ \
51 })
52#define SPEEDSTEP_ENCODE_STATE(state) ( \
53 ((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \
54 ((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \
55 ((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \
56 ((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
57#define SPEEDSTEP_DOUBLE_RATIO(state) ( \
58 ((uint8_t)(state).ratio * 2) + (state).nonint)
59
60struct sst_params {
61 struct sst_state slfm;
62 struct sst_state min;
63 struct sst_state max;
64 struct sst_state turbo;
65};
66
67/* Looking at core2's spec, the highest normal bus ratio for an eist enabled
68 processor is 14, the lowest is always 6. This makes 5 states with the
69 minimal step width of 2. With turbo mode and super LFM we have at most 7. */
70#define SPEEDSTEP_MAX_NORMAL_STATES 5
71#define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2)
72struct sst_table {
73 /* Table of p-states for EMTTM and ACPI by decreasing performance. */
74 struct sst_state states[SPEEDSTEP_MAX_STATES];
75 int num_states;
76};
77
78void speedstep_gen_pstates(struct sst_table *);
79
80#define SPEEDSTEP_MAX_POWER_YONAH 31000
81#define SPEEDSTEP_MIN_POWER_YONAH 13100
82#define SPEEDSTEP_MAX_POWER_MEROM 35000
83#define SPEEDSTEP_MIN_POWER_MEROM 25000
84#define SPEEDSTEP_SLFM_POWER_MEROM 12000
85#define SPEEDSTEP_MAX_POWER_PENRYN 35000
86#define SPEEDSTEP_MIN_POWER_PENRYN 15000
87#define SPEEDSTEP_SLFM_POWER_PENRYN 12000
88
89#endif