Jassi Brar | 9c5cb7f | 2020-07-29 20:51:27 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | |
Tom Rini | abb9a04 | 2024-05-18 20:20:43 -0600 | [diff] [blame] | 3 | #include <common.h> |
Jassi Brar | 9c5cb7f | 2020-07-29 20:51:27 -0500 | [diff] [blame] | 4 | #include <linux/errno.h> |
| 5 | #include <linux/delay.h> |
| 6 | #include <asm/gpio.h> |
| 7 | #include <linux/list.h> |
| 8 | #include <linux/bitfield.h> |
| 9 | #include <linux/usb/ch9.h> |
| 10 | #include <linux/usb/gadget.h> |
| 11 | #include <malloc.h> |
| 12 | #include <spi.h> |
| 13 | #include <dm.h> |
| 14 | #include <g_dnl.h> |
| 15 | |
| 16 | #define MAX3420_MAX_EPS 4 |
| 17 | #define EP_MAX_PACKET 64 /* Same for all Endpoints */ |
| 18 | #define EPNAME_SIZE 16 /* Buffer size for endpoint name */ |
| 19 | |
| 20 | #define MAX3420_SPI_DIR_RD 0 /* read register from MAX3420 */ |
| 21 | #define MAX3420_SPI_DIR_WR 1 /* write register to MAX3420 */ |
| 22 | |
| 23 | /* SPI commands: */ |
| 24 | #define MAX3420_SPI_ACK_MASK BIT(0) |
| 25 | #define MAX3420_SPI_DIR_MASK BIT(1) |
| 26 | #define MAX3420_SPI_REG_MASK GENMASK(7, 3) |
| 27 | |
| 28 | #define MAX3420_REG_EP0FIFO 0 |
| 29 | #define MAX3420_REG_EP1FIFO 1 |
| 30 | #define MAX3420_REG_EP2FIFO 2 |
| 31 | #define MAX3420_REG_EP3FIFO 3 |
| 32 | #define MAX3420_REG_SUDFIFO 4 |
| 33 | #define MAX3420_REG_EP0BC 5 |
| 34 | #define MAX3420_REG_EP1BC 6 |
| 35 | #define MAX3420_REG_EP2BC 7 |
| 36 | #define MAX3420_REG_EP3BC 8 |
| 37 | |
| 38 | #define MAX3420_REG_EPSTALLS 9 |
| 39 | #define bACKSTAT BIT(6) |
| 40 | #define bSTLSTAT BIT(5) |
| 41 | #define bSTLEP3IN BIT(4) |
| 42 | #define bSTLEP2IN BIT(3) |
| 43 | #define bSTLEP1OUT BIT(2) |
| 44 | #define bSTLEP0OUT BIT(1) |
| 45 | #define bSTLEP0IN BIT(0) |
| 46 | |
| 47 | #define MAX3420_REG_CLRTOGS 10 |
| 48 | #define bEP3DISAB BIT(7) |
| 49 | #define bEP2DISAB BIT(6) |
| 50 | #define bEP1DISAB BIT(5) |
| 51 | #define bCTGEP3IN BIT(4) |
| 52 | #define bCTGEP2IN BIT(3) |
| 53 | #define bCTGEP1OUT BIT(2) |
| 54 | |
| 55 | #define MAX3420_REG_EPIRQ 11 |
| 56 | #define MAX3420_REG_EPIEN 12 |
| 57 | #define bSUDAVIRQ BIT(5) |
| 58 | #define bIN3BAVIRQ BIT(4) |
| 59 | #define bIN2BAVIRQ BIT(3) |
| 60 | #define bOUT1DAVIRQ BIT(2) |
| 61 | #define bOUT0DAVIRQ BIT(1) |
| 62 | #define bIN0BAVIRQ BIT(0) |
| 63 | |
| 64 | #define MAX3420_REG_USBIRQ 13 |
| 65 | #define MAX3420_REG_USBIEN 14 |
| 66 | #define bOSCOKIRQ BIT(0) |
| 67 | #define bRWUDNIRQ BIT(1) |
| 68 | #define bBUSACTIRQ BIT(2) |
| 69 | #define bURESIRQ BIT(3) |
| 70 | #define bSUSPIRQ BIT(4) |
| 71 | #define bNOVBUSIRQ BIT(5) |
| 72 | #define bVBUSIRQ BIT(6) |
| 73 | #define bURESDNIRQ BIT(7) |
| 74 | |
| 75 | #define MAX3420_REG_USBCTL 15 |
| 76 | #define bHOSCSTEN BIT(7) |
| 77 | #define bVBGATE BIT(6) |
| 78 | #define bCHIPRES BIT(5) |
| 79 | #define bPWRDOWN BIT(4) |
| 80 | #define bCONNECT BIT(3) |
| 81 | #define bSIGRWU BIT(2) |
| 82 | |
| 83 | #define MAX3420_REG_CPUCTL 16 |
| 84 | #define bIE BIT(0) |
| 85 | |
| 86 | #define MAX3420_REG_PINCTL 17 |
| 87 | #define bEP3INAK BIT(7) |
| 88 | #define bEP2INAK BIT(6) |
| 89 | #define bEP0INAK BIT(5) |
| 90 | #define bFDUPSPI BIT(4) |
| 91 | #define bINTLEVEL BIT(3) |
| 92 | #define bPOSINT BIT(2) |
| 93 | #define bGPXB BIT(1) |
| 94 | #define bGPXA BIT(0) |
| 95 | |
| 96 | #define MAX3420_REG_REVISION 18 |
| 97 | |
| 98 | #define MAX3420_REG_FNADDR 19 |
| 99 | #define FNADDR_MASK 0x7f |
| 100 | |
| 101 | #define MAX3420_REG_IOPINS 20 |
| 102 | #define MAX3420_REG_IOPINS2 21 |
| 103 | #define MAX3420_REG_GPINIRQ 22 |
| 104 | #define MAX3420_REG_GPINIEN 23 |
| 105 | #define MAX3420_REG_GPINPOL 24 |
| 106 | #define MAX3420_REG_HIRQ 25 |
| 107 | #define MAX3420_REG_HIEN 26 |
| 108 | #define MAX3420_REG_MODE 27 |
| 109 | #define MAX3420_REG_PERADDR 28 |
| 110 | #define MAX3420_REG_HCTL 29 |
| 111 | #define MAX3420_REG_HXFR 30 |
| 112 | #define MAX3420_REG_HRSL 31 |
| 113 | |
| 114 | struct max3420_req { |
| 115 | struct usb_request usb_req; |
| 116 | struct list_head queue; |
| 117 | struct max3420_ep *ep; |
| 118 | }; |
| 119 | |
| 120 | struct max3420_ep { |
| 121 | struct max3420_udc *udc; |
| 122 | struct list_head queue; |
| 123 | char name[EPNAME_SIZE]; |
| 124 | unsigned int maxpacket; |
| 125 | struct usb_ep ep_usb; |
| 126 | int halted; |
| 127 | int id; |
| 128 | }; |
| 129 | |
| 130 | struct max3420_udc { |
| 131 | struct max3420_ep ep[MAX3420_MAX_EPS]; |
| 132 | struct usb_gadget_driver *driver; |
| 133 | bool softconnect; |
| 134 | struct usb_ctrlrequest setup; |
| 135 | struct max3420_req ep0req; |
| 136 | struct usb_gadget gadget; |
| 137 | struct spi_slave *slave; |
| 138 | struct udevice *dev; |
| 139 | u8 ep0buf[64]; |
| 140 | int remote_wkp; |
| 141 | bool suspended; |
| 142 | }; |
| 143 | |
| 144 | #define to_max3420_req(r) container_of((r), struct max3420_req, usb_req) |
| 145 | #define to_max3420_ep(e) container_of((e), struct max3420_ep, ep_usb) |
| 146 | #define to_udc(g) container_of((g), struct max3420_udc, gadget) |
| 147 | |
| 148 | static void spi_ack_ctrl(struct max3420_udc *udc) |
| 149 | { |
| 150 | struct spi_slave *slave = udc->slave; |
| 151 | u8 txdata[1]; |
| 152 | |
| 153 | txdata[0] = FIELD_PREP(MAX3420_SPI_ACK_MASK, 1); |
| 154 | spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_ONCE); |
| 155 | } |
| 156 | |
| 157 | static u8 spi_rd8_ack(struct max3420_udc *udc, u8 reg, int ackstat) |
| 158 | { |
| 159 | struct spi_slave *slave = udc->slave; |
| 160 | u8 txdata[2], rxdata[2]; |
| 161 | |
| 162 | txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) | |
| 163 | FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_RD) | |
| 164 | FIELD_PREP(MAX3420_SPI_ACK_MASK, ackstat ? 1 : 0); |
| 165 | |
| 166 | rxdata[0] = 0; |
| 167 | rxdata[1] = 0; |
| 168 | spi_xfer(slave, sizeof(txdata), txdata, rxdata, SPI_XFER_ONCE); |
| 169 | |
| 170 | return rxdata[1]; |
| 171 | } |
| 172 | |
| 173 | static u8 spi_rd8(struct max3420_udc *udc, u8 reg) |
| 174 | { |
| 175 | return spi_rd8_ack(udc, reg, 0); |
| 176 | } |
| 177 | |
| 178 | static void spi_wr8_ack(struct max3420_udc *udc, u8 reg, u8 val, int ackstat) |
| 179 | { |
| 180 | struct spi_slave *slave = udc->slave; |
| 181 | u8 txdata[2]; |
| 182 | |
| 183 | txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) | |
| 184 | FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_WR) | |
| 185 | FIELD_PREP(MAX3420_SPI_ACK_MASK, ackstat ? 1 : 0); |
| 186 | txdata[1] = val; |
| 187 | |
| 188 | spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_ONCE); |
| 189 | } |
| 190 | |
| 191 | static void spi_wr8(struct max3420_udc *udc, u8 reg, u8 val) |
| 192 | { |
| 193 | spi_wr8_ack(udc, reg, val, 0); |
| 194 | } |
| 195 | |
| 196 | static void spi_rd_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len) |
| 197 | { |
| 198 | struct spi_slave *slave = udc->slave; |
| 199 | u8 txdata[1]; |
| 200 | |
| 201 | txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) | |
| 202 | FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_RD); |
| 203 | |
| 204 | spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_BEGIN); |
| 205 | spi_xfer(slave, len * 8, NULL, buf, SPI_XFER_END); |
| 206 | } |
| 207 | |
| 208 | static void spi_wr_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len) |
| 209 | { |
| 210 | struct spi_slave *slave = udc->slave; |
| 211 | u8 txdata[1]; |
| 212 | |
| 213 | txdata[0] = FIELD_PREP(MAX3420_SPI_REG_MASK, reg) | |
| 214 | FIELD_PREP(MAX3420_SPI_DIR_MASK, MAX3420_SPI_DIR_WR); |
| 215 | |
| 216 | spi_xfer(slave, sizeof(txdata), txdata, NULL, SPI_XFER_BEGIN); |
| 217 | spi_xfer(slave, len * 8, buf, NULL, SPI_XFER_END); |
| 218 | } |
| 219 | |
| 220 | /* 0 if not-connected */ |
| 221 | int g_dnl_board_usb_cable_connected(void) |
| 222 | { |
| 223 | return 1; |
| 224 | } |
| 225 | |
| 226 | static void spi_max3420_enable(struct max3420_ep *ep, int enable) |
| 227 | { |
| 228 | struct max3420_udc *udc = ep->udc; |
| 229 | u8 epdis, epien; |
| 230 | |
| 231 | if (ep->id == 0) |
| 232 | return; |
| 233 | |
| 234 | epien = spi_rd8(udc, MAX3420_REG_EPIEN); |
| 235 | epdis = spi_rd8(udc, MAX3420_REG_CLRTOGS); |
| 236 | |
| 237 | if (enable) { |
| 238 | epdis &= ~BIT(ep->id + 4); |
| 239 | epien |= BIT(ep->id + 1); |
| 240 | } else { |
| 241 | epdis |= BIT(ep->id + 4); |
| 242 | epien &= ~BIT(ep->id + 1); |
| 243 | } |
| 244 | |
| 245 | spi_wr8(udc, MAX3420_REG_CLRTOGS, epdis); |
| 246 | spi_wr8(udc, MAX3420_REG_EPIEN, epien); |
| 247 | } |
| 248 | |
| 249 | static int |
| 250 | max3420_ep_enable(struct usb_ep *_ep, |
| 251 | const struct usb_endpoint_descriptor *desc) |
| 252 | { |
| 253 | struct max3420_ep *ep = to_max3420_ep(_ep); |
| 254 | |
| 255 | _ep->desc = desc; |
| 256 | _ep->maxpacket = usb_endpoint_maxp(desc) & 0x7ff; |
| 257 | |
| 258 | spi_max3420_enable(ep, 1); |
| 259 | |
| 260 | return 0; |
| 261 | } |
| 262 | |
| 263 | static void max3420_req_done(struct max3420_req *req, int status) |
| 264 | { |
| 265 | struct max3420_ep *ep = req->ep; |
| 266 | |
| 267 | if (req->usb_req.status == -EINPROGRESS) |
| 268 | req->usb_req.status = status; |
| 269 | else |
| 270 | status = req->usb_req.status; |
| 271 | |
| 272 | if (status && status != -ESHUTDOWN) |
| 273 | dev_err(ep->udc->dev, "%s done %p, status %d\n", |
| 274 | ep->ep_usb.name, req, status); |
| 275 | |
| 276 | if (req->usb_req.complete) |
| 277 | req->usb_req.complete(&ep->ep_usb, &req->usb_req); |
| 278 | } |
| 279 | |
| 280 | static void max3420_ep_nuke(struct max3420_ep *ep, int status) |
| 281 | { |
| 282 | struct max3420_req *req, *r; |
| 283 | |
| 284 | list_for_each_entry_safe(req, r, &ep->queue, queue) { |
| 285 | list_del_init(&req->queue); |
| 286 | max3420_req_done(req, status); |
| 287 | } |
| 288 | } |
| 289 | |
| 290 | static int max3420_ep_disable(struct usb_ep *_ep) |
| 291 | { |
| 292 | struct max3420_ep *ep = to_max3420_ep(_ep); |
| 293 | |
| 294 | _ep->desc = NULL; |
| 295 | max3420_ep_nuke(ep, -ESHUTDOWN); |
| 296 | spi_max3420_enable(ep, 0); |
| 297 | |
| 298 | return 0; |
| 299 | } |
| 300 | |
| 301 | static struct usb_request * |
| 302 | max3420_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) |
| 303 | { |
| 304 | struct max3420_ep *ep = to_max3420_ep(_ep); |
| 305 | struct max3420_req *req = kzalloc(sizeof(*req), gfp_flags); |
| 306 | |
| 307 | if (!req) |
| 308 | return NULL; |
| 309 | |
| 310 | req->ep = ep; |
| 311 | INIT_LIST_HEAD(&req->queue); |
| 312 | |
| 313 | return &req->usb_req; |
| 314 | } |
| 315 | |
| 316 | static void |
| 317 | max3420_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| 318 | { |
| 319 | kfree(to_max3420_req(_req)); |
| 320 | } |
| 321 | |
| 322 | static int |
| 323 | max3420_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) |
| 324 | { |
| 325 | struct max3420_req *req = to_max3420_req(_req); |
| 326 | struct max3420_ep *ep = to_max3420_ep(_ep); |
| 327 | |
| 328 | _req->status = -EINPROGRESS; |
| 329 | _req->actual = 0; |
| 330 | list_add_tail(&req->queue, &ep->queue); |
| 331 | |
| 332 | return 0; |
| 333 | } |
| 334 | |
| 335 | static int max3420_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| 336 | { |
| 337 | struct max3420_req *req = to_max3420_req(_req); |
| 338 | |
| 339 | list_del_init(&req->queue); |
| 340 | max3420_req_done(req, -ECONNRESET); |
| 341 | |
| 342 | return 0; |
| 343 | } |
| 344 | |
| 345 | static int max3420_ep_set_halt(struct usb_ep *_ep, int halt) |
| 346 | { |
| 347 | struct max3420_ep *ep = to_max3420_ep(_ep); |
| 348 | struct max3420_udc *udc = ep->udc; |
| 349 | u8 epstalls; |
| 350 | |
| 351 | if (ep->id == 0) /* can't stall EP0 */ |
| 352 | return 0; |
| 353 | |
| 354 | epstalls = spi_rd8(udc, MAX3420_REG_EPSTALLS); |
| 355 | if (halt) { |
| 356 | ep->halted = 1; |
| 357 | epstalls |= BIT(ep->id + 1); |
| 358 | } else { |
| 359 | u8 clrtogs; |
| 360 | |
| 361 | ep->halted = 0; |
| 362 | epstalls &= ~BIT(ep->id + 1); |
| 363 | clrtogs = spi_rd8(udc, MAX3420_REG_CLRTOGS); |
| 364 | clrtogs |= BIT(ep->id + 1); |
| 365 | spi_wr8(udc, MAX3420_REG_CLRTOGS, clrtogs); |
| 366 | } |
| 367 | spi_wr8(udc, MAX3420_REG_EPSTALLS, epstalls | bACKSTAT); |
| 368 | |
| 369 | return 0; |
| 370 | } |
| 371 | |
| 372 | static const struct usb_ep_ops max3420_ep_ops = { |
| 373 | .enable = max3420_ep_enable, |
| 374 | .disable = max3420_ep_disable, |
| 375 | .alloc_request = max3420_ep_alloc_request, |
| 376 | .free_request = max3420_ep_free_request, |
| 377 | .queue = max3420_ep_queue, |
| 378 | .dequeue = max3420_ep_dequeue, |
| 379 | .set_halt = max3420_ep_set_halt, |
| 380 | }; |
| 381 | |
| 382 | static void __max3420_stop(struct max3420_udc *udc) |
| 383 | { |
| 384 | u8 val; |
| 385 | |
| 386 | /* Disable IRQ to CPU */ |
| 387 | spi_wr8(udc, MAX3420_REG_CPUCTL, 0); |
| 388 | |
| 389 | val = spi_rd8(udc, MAX3420_REG_USBCTL); |
| 390 | val |= bPWRDOWN; |
| 391 | val |= bHOSCSTEN; |
| 392 | spi_wr8(udc, MAX3420_REG_USBCTL, val); |
| 393 | } |
| 394 | |
| 395 | static void __max3420_start(struct max3420_udc *udc) |
| 396 | { |
| 397 | u8 val; |
| 398 | |
| 399 | /* configure SPI */ |
| 400 | spi_wr8(udc, MAX3420_REG_PINCTL, bFDUPSPI); |
| 401 | |
| 402 | /* Chip Reset */ |
| 403 | spi_wr8(udc, MAX3420_REG_USBCTL, bCHIPRES); |
| 404 | mdelay(5); |
| 405 | spi_wr8(udc, MAX3420_REG_USBCTL, 0); |
| 406 | |
| 407 | /* Poll for OSC to stabilize */ |
| 408 | while (1) { |
| 409 | val = spi_rd8(udc, MAX3420_REG_USBIRQ); |
| 410 | if (val & bOSCOKIRQ) |
| 411 | break; |
| 412 | cond_resched(); |
| 413 | } |
| 414 | |
| 415 | /* Enable PULL-UP only when Vbus detected */ |
| 416 | val = spi_rd8(udc, MAX3420_REG_USBCTL); |
| 417 | val |= bVBGATE | bCONNECT; |
| 418 | spi_wr8(udc, MAX3420_REG_USBCTL, val); |
| 419 | |
| 420 | val = bURESDNIRQ | bURESIRQ; |
| 421 | spi_wr8(udc, MAX3420_REG_USBIEN, val); |
| 422 | |
| 423 | /* Enable only EP0 interrupts */ |
| 424 | val = bIN0BAVIRQ | bOUT0DAVIRQ | bSUDAVIRQ; |
| 425 | spi_wr8(udc, MAX3420_REG_EPIEN, val); |
| 426 | |
| 427 | /* Enable IRQ to CPU */ |
| 428 | spi_wr8(udc, MAX3420_REG_CPUCTL, bIE); |
| 429 | } |
| 430 | |
| 431 | static int max3420_udc_start(struct usb_gadget *gadget, |
| 432 | struct usb_gadget_driver *driver) |
| 433 | { |
| 434 | struct max3420_udc *udc = to_udc(gadget); |
| 435 | |
| 436 | udc->driver = driver; |
| 437 | udc->remote_wkp = 0; |
| 438 | udc->softconnect = true; |
| 439 | |
| 440 | __max3420_start(udc); |
| 441 | |
| 442 | return 0; |
| 443 | } |
| 444 | |
| 445 | static int max3420_udc_stop(struct usb_gadget *gadget) |
| 446 | { |
| 447 | struct max3420_udc *udc = to_udc(gadget); |
| 448 | |
| 449 | udc->driver = NULL; |
| 450 | udc->softconnect = false; |
| 451 | |
| 452 | __max3420_stop(udc); |
| 453 | |
| 454 | return 0; |
| 455 | } |
| 456 | |
| 457 | static int max3420_wakeup(struct usb_gadget *gadget) |
| 458 | { |
| 459 | struct max3420_udc *udc = to_udc(gadget); |
| 460 | u8 usbctl; |
| 461 | |
| 462 | /* Only if wakeup allowed by host */ |
| 463 | if (!udc->remote_wkp || !udc->suspended) |
| 464 | return 0; |
| 465 | |
| 466 | /* Set Remote-Wakeup Signal*/ |
| 467 | usbctl = spi_rd8(udc, MAX3420_REG_USBCTL); |
| 468 | usbctl |= bSIGRWU; |
| 469 | spi_wr8(udc, MAX3420_REG_USBCTL, usbctl); |
| 470 | |
| 471 | mdelay(5); |
| 472 | |
| 473 | /* Clear Remote-WkUp Signal*/ |
| 474 | usbctl = spi_rd8(udc, MAX3420_REG_USBCTL); |
| 475 | usbctl &= ~bSIGRWU; |
| 476 | spi_wr8(udc, MAX3420_REG_USBCTL, usbctl); |
| 477 | |
| 478 | udc->suspended = false; |
| 479 | |
| 480 | return 0; |
| 481 | } |
| 482 | |
| 483 | static const struct usb_gadget_ops max3420_udc_ops = { |
| 484 | .udc_start = max3420_udc_start, |
| 485 | .udc_stop = max3420_udc_stop, |
| 486 | .wakeup = max3420_wakeup, |
| 487 | }; |
| 488 | |
| 489 | static struct usb_endpoint_descriptor ep0_desc = { |
| 490 | .bLength = USB_DT_ENDPOINT_SIZE, |
| 491 | .bDescriptorType = USB_DT_ENDPOINT, |
| 492 | .bEndpointAddress = USB_DIR_OUT, |
| 493 | .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| 494 | .wMaxPacketSize = cpu_to_le16(EP_MAX_PACKET), |
| 495 | }; |
| 496 | |
| 497 | static void max3420_getstatus(struct max3420_udc *udc) |
| 498 | { |
| 499 | struct max3420_ep *ep; |
| 500 | u16 status = 0; |
| 501 | |
| 502 | switch (udc->setup.bRequestType & USB_RECIP_MASK) { |
| 503 | case USB_RECIP_DEVICE: |
| 504 | /* Get device status */ |
| 505 | status = 0 << USB_DEVICE_SELF_POWERED; |
| 506 | status |= (udc->remote_wkp << USB_DEVICE_REMOTE_WAKEUP); |
| 507 | break; |
| 508 | case USB_RECIP_INTERFACE: |
| 509 | if (udc->driver->setup(&udc->gadget, &udc->setup) < 0) |
| 510 | goto stall; |
| 511 | break; |
| 512 | case USB_RECIP_ENDPOINT: |
| 513 | ep = &udc->ep[udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK]; |
| 514 | if (ep->halted) |
| 515 | status = 1 << USB_ENDPOINT_HALT; |
| 516 | break; |
| 517 | default: |
| 518 | goto stall; |
| 519 | } |
| 520 | |
| 521 | status = cpu_to_le16(status); |
| 522 | spi_wr_buf(udc, MAX3420_REG_EP0FIFO, &status, 2); |
| 523 | spi_wr8_ack(udc, MAX3420_REG_EP0BC, 2, 1); |
| 524 | return; |
| 525 | stall: |
| 526 | dev_err(udc->dev, "Can't respond to getstatus request\n"); |
| 527 | spi_wr8(udc, MAX3420_REG_EPSTALLS, bSTLEP0IN | bSTLEP0OUT | bSTLSTAT); |
| 528 | } |
| 529 | |
| 530 | static void max3420_set_clear_feature(struct max3420_udc *udc) |
| 531 | { |
| 532 | int set = udc->setup.bRequest == USB_REQ_SET_FEATURE; |
| 533 | struct max3420_ep *ep; |
| 534 | int id; |
| 535 | |
| 536 | switch (udc->setup.bRequestType) { |
| 537 | case USB_RECIP_DEVICE: |
| 538 | if (udc->setup.wValue != USB_DEVICE_REMOTE_WAKEUP) |
| 539 | break; |
| 540 | |
| 541 | if (udc->setup.bRequest == USB_REQ_SET_FEATURE) |
| 542 | udc->remote_wkp = 1; |
| 543 | else |
| 544 | udc->remote_wkp = 0; |
| 545 | |
| 546 | return spi_ack_ctrl(udc); |
| 547 | |
| 548 | case USB_RECIP_ENDPOINT: |
| 549 | if (udc->setup.wValue != USB_ENDPOINT_HALT) |
| 550 | break; |
| 551 | |
| 552 | id = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; |
| 553 | ep = &udc->ep[id]; |
| 554 | |
| 555 | max3420_ep_set_halt(&ep->ep_usb, set); |
| 556 | return; |
| 557 | default: |
| 558 | break; |
| 559 | } |
| 560 | |
| 561 | dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n"); |
| 562 | spi_wr8(udc, MAX3420_REG_EPSTALLS, bSTLEP0IN | bSTLEP0OUT | bSTLSTAT); |
| 563 | } |
| 564 | |
| 565 | static void max3420_handle_setup(struct max3420_udc *udc) |
| 566 | { |
| 567 | struct usb_ctrlrequest setup; |
| 568 | u8 addr; |
| 569 | |
| 570 | spi_rd_buf(udc, MAX3420_REG_SUDFIFO, (void *)&setup, 8); |
| 571 | |
| 572 | udc->setup = setup; |
| 573 | udc->setup.wValue = cpu_to_le16(setup.wValue); |
| 574 | udc->setup.wIndex = cpu_to_le16(setup.wIndex); |
| 575 | udc->setup.wLength = cpu_to_le16(setup.wLength); |
| 576 | |
| 577 | switch (udc->setup.bRequest) { |
| 578 | case USB_REQ_GET_STATUS: |
| 579 | /* Data+Status phase form udc */ |
| 580 | if ((udc->setup.bRequestType & |
| 581 | (USB_DIR_IN | USB_TYPE_MASK)) != |
| 582 | (USB_DIR_IN | USB_TYPE_STANDARD)) { |
| 583 | break; |
| 584 | } |
| 585 | return max3420_getstatus(udc); |
| 586 | case USB_REQ_SET_ADDRESS: |
| 587 | /* Status phase from udc */ |
| 588 | if (udc->setup.bRequestType != (USB_DIR_OUT | |
| 589 | USB_TYPE_STANDARD | USB_RECIP_DEVICE)) |
| 590 | break; |
| 591 | addr = spi_rd8_ack(udc, MAX3420_REG_FNADDR, 1); |
| 592 | dev_dbg(udc->dev, "Assigned Address=%d/%d\n", |
| 593 | udc->setup.wValue, addr); |
| 594 | return; |
| 595 | case USB_REQ_CLEAR_FEATURE: |
| 596 | case USB_REQ_SET_FEATURE: |
| 597 | /* Requests with no data phase, status phase from udc */ |
| 598 | if ((udc->setup.bRequestType & USB_TYPE_MASK) |
| 599 | != USB_TYPE_STANDARD) |
| 600 | break; |
| 601 | return max3420_set_clear_feature(udc); |
| 602 | default: |
| 603 | break; |
| 604 | } |
| 605 | |
| 606 | if (udc->driver->setup(&udc->gadget, &setup) < 0) { |
| 607 | /* Stall EP0 */ |
| 608 | spi_wr8(udc, MAX3420_REG_EPSTALLS, |
| 609 | bSTLEP0IN | bSTLEP0OUT | bSTLSTAT); |
| 610 | } |
| 611 | } |
| 612 | |
| 613 | static int do_data(struct max3420_udc *udc, int ep_id, int in) |
| 614 | { |
| 615 | struct max3420_ep *ep = &udc->ep[ep_id]; |
| 616 | struct max3420_req *req; |
| 617 | int done, length, psz; |
| 618 | void *buf; |
| 619 | |
| 620 | if (list_empty(&ep->queue)) |
| 621 | return 0; |
| 622 | |
| 623 | req = list_first_entry(&ep->queue, struct max3420_req, queue); |
| 624 | buf = req->usb_req.buf + req->usb_req.actual; |
| 625 | |
| 626 | psz = ep->ep_usb.maxpacket; |
| 627 | length = req->usb_req.length - req->usb_req.actual; |
| 628 | length = min(length, psz); |
| 629 | |
| 630 | if (length == 0) { |
| 631 | done = 1; |
| 632 | goto xfer_done; |
| 633 | } |
| 634 | |
| 635 | done = 0; |
| 636 | if (in) { |
| 637 | spi_wr_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length); |
| 638 | spi_wr8(udc, MAX3420_REG_EP0BC + ep_id, length); |
| 639 | if (length < psz) |
| 640 | done = 1; |
| 641 | } else { |
| 642 | psz = spi_rd8(udc, MAX3420_REG_EP0BC + ep_id); |
| 643 | length = min(length, psz); |
| 644 | spi_rd_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length); |
| 645 | if (length < ep->ep_usb.maxpacket) |
| 646 | done = 1; |
| 647 | } |
| 648 | |
| 649 | req->usb_req.actual += length; |
| 650 | |
| 651 | if (req->usb_req.actual == req->usb_req.length) |
| 652 | done = 1; |
| 653 | |
| 654 | xfer_done: |
| 655 | if (done) { |
| 656 | list_del_init(&req->queue); |
| 657 | |
| 658 | if (ep_id == 0) |
| 659 | spi_ack_ctrl(udc); |
| 660 | |
| 661 | max3420_req_done(req, 0); |
| 662 | } |
| 663 | |
| 664 | return 1; |
| 665 | } |
| 666 | |
| 667 | static int max3420_handle_irqs(struct max3420_udc *udc) |
| 668 | { |
| 669 | u8 epien, epirq, usbirq, usbien, reg[4]; |
| 670 | int ret = 0; |
| 671 | |
| 672 | spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 4); |
| 673 | epirq = reg[0]; |
| 674 | epien = reg[1]; |
| 675 | usbirq = reg[2]; |
| 676 | usbien = reg[3]; |
| 677 | |
| 678 | usbirq &= usbien; |
| 679 | epirq &= epien; |
| 680 | |
| 681 | if (epirq & bSUDAVIRQ) { |
| 682 | spi_wr8(udc, MAX3420_REG_EPIRQ, bSUDAVIRQ); |
| 683 | max3420_handle_setup(udc); |
| 684 | return 1; |
| 685 | } |
| 686 | |
| 687 | if (usbirq & bVBUSIRQ) { |
| 688 | spi_wr8(udc, MAX3420_REG_USBIRQ, bVBUSIRQ); |
| 689 | dev_dbg(udc->dev, "Cable plugged in\n"); |
| 690 | g_dnl_clear_detach(); |
| 691 | return 1; |
| 692 | } |
| 693 | |
| 694 | if (usbirq & bNOVBUSIRQ) { |
| 695 | spi_wr8(udc, MAX3420_REG_USBIRQ, bNOVBUSIRQ); |
| 696 | dev_dbg(udc->dev, "Cable pulled out\n"); |
| 697 | g_dnl_trigger_detach(); |
| 698 | return 1; |
| 699 | } |
| 700 | |
| 701 | if (usbirq & bURESIRQ) { |
| 702 | spi_wr8(udc, MAX3420_REG_USBIRQ, bURESIRQ); |
| 703 | return 1; |
| 704 | } |
| 705 | |
| 706 | if (usbirq & bURESDNIRQ) { |
| 707 | spi_wr8(udc, MAX3420_REG_USBIRQ, bURESDNIRQ); |
| 708 | spi_wr8(udc, MAX3420_REG_USBIEN, bURESDNIRQ | bURESIRQ); |
| 709 | spi_wr8(udc, MAX3420_REG_EPIEN, bSUDAVIRQ |
| 710 | | bIN0BAVIRQ | bOUT0DAVIRQ); |
| 711 | return 1; |
| 712 | } |
| 713 | |
| 714 | if (usbirq & bSUSPIRQ) { |
| 715 | spi_wr8(udc, MAX3420_REG_USBIRQ, bSUSPIRQ); |
| 716 | dev_dbg(udc->dev, "USB Suspend - Enter\n"); |
| 717 | udc->suspended = true; |
| 718 | return 1; |
| 719 | } |
| 720 | |
| 721 | if (usbirq & bBUSACTIRQ) { |
| 722 | spi_wr8(udc, MAX3420_REG_USBIRQ, bBUSACTIRQ); |
| 723 | dev_dbg(udc->dev, "USB Suspend - Exit\n"); |
| 724 | udc->suspended = false; |
| 725 | return 1; |
| 726 | } |
| 727 | |
| 728 | if (usbirq & bRWUDNIRQ) { |
| 729 | spi_wr8(udc, MAX3420_REG_USBIRQ, bRWUDNIRQ); |
| 730 | dev_dbg(udc->dev, "Asked Host to wakeup\n"); |
| 731 | return 1; |
| 732 | } |
| 733 | |
| 734 | if (usbirq & bOSCOKIRQ) { |
| 735 | spi_wr8(udc, MAX3420_REG_USBIRQ, bOSCOKIRQ); |
| 736 | dev_dbg(udc->dev, "Osc stabilized, start work\n"); |
| 737 | return 1; |
| 738 | } |
| 739 | |
| 740 | if (epirq & bOUT0DAVIRQ && do_data(udc, 0, 0)) { |
| 741 | spi_wr8_ack(udc, MAX3420_REG_EPIRQ, bOUT0DAVIRQ, 1); |
| 742 | ret = 1; |
| 743 | } |
| 744 | |
| 745 | if (epirq & bIN0BAVIRQ && do_data(udc, 0, 1)) |
| 746 | ret = 1; |
| 747 | |
| 748 | if (epirq & bOUT1DAVIRQ && do_data(udc, 1, 0)) { |
| 749 | spi_wr8_ack(udc, MAX3420_REG_EPIRQ, bOUT1DAVIRQ, 1); |
| 750 | ret = 1; |
| 751 | } |
| 752 | |
| 753 | if (epirq & bIN2BAVIRQ && do_data(udc, 2, 1)) |
| 754 | ret = 1; |
| 755 | |
| 756 | if (epirq & bIN3BAVIRQ && do_data(udc, 3, 1)) |
| 757 | ret = 1; |
| 758 | |
| 759 | return ret; |
| 760 | } |
| 761 | |
| 762 | static int max3420_irq(struct max3420_udc *udc) |
| 763 | { |
| 764 | do_data(udc, 0, 1); /* get done with the EP0 ZLP */ |
| 765 | |
| 766 | return max3420_handle_irqs(udc); |
| 767 | } |
| 768 | |
| 769 | static void max3420_setup_eps(struct max3420_udc *udc) |
| 770 | { |
| 771 | int i; |
| 772 | |
| 773 | INIT_LIST_HEAD(&udc->gadget.ep_list); |
| 774 | INIT_LIST_HEAD(&udc->ep[0].ep_usb.ep_list); |
| 775 | |
| 776 | for (i = 0; i < MAX3420_MAX_EPS; i++) { |
| 777 | struct max3420_ep *ep = &udc->ep[i]; |
| 778 | |
| 779 | INIT_LIST_HEAD(&ep->queue); |
| 780 | |
| 781 | ep->id = i; |
| 782 | ep->udc = udc; |
| 783 | ep->ep_usb.ops = &max3420_ep_ops; |
| 784 | ep->ep_usb.name = ep->name; |
| 785 | ep->ep_usb.maxpacket = EP_MAX_PACKET; |
| 786 | |
| 787 | if (i == 0) { |
| 788 | ep->ep_usb.desc = &ep0_desc; |
| 789 | snprintf(ep->name, EPNAME_SIZE, "ep0"); |
| 790 | continue; |
| 791 | } |
| 792 | |
| 793 | list_add_tail(&ep->ep_usb.ep_list, &udc->gadget.ep_list); |
| 794 | |
| 795 | if (i == 1) |
| 796 | snprintf(ep->name, EPNAME_SIZE, "ep1out-bulk"); |
| 797 | else |
| 798 | snprintf(ep->name, EPNAME_SIZE, "ep%din-bulk", i); |
| 799 | }; |
| 800 | } |
| 801 | |
| 802 | static void max3420_setup_spi(struct max3420_udc *udc) |
| 803 | { |
| 804 | u8 reg[8]; |
| 805 | |
| 806 | spi_claim_bus(udc->slave); |
| 807 | spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8); |
| 808 | /* configure SPI */ |
| 809 | spi_wr8(udc, MAX3420_REG_PINCTL, bFDUPSPI); |
| 810 | } |
| 811 | |
| 812 | int dm_usb_gadget_handle_interrupts(struct udevice *dev) |
| 813 | { |
| 814 | struct max3420_udc *udc = dev_get_priv(dev); |
| 815 | |
| 816 | return max3420_irq(udc); |
| 817 | } |
| 818 | |
| 819 | static int max3420_udc_probe(struct udevice *dev) |
| 820 | { |
| 821 | struct max3420_udc *udc = dev_get_priv(dev); |
Simon Glass | b75b15b | 2020-12-03 16:55:23 -0700 | [diff] [blame] | 822 | struct dm_spi_slave_plat *slave_pdata; |
Jassi Brar | 9c5cb7f | 2020-07-29 20:51:27 -0500 | [diff] [blame] | 823 | struct udevice *bus = dev->parent; |
Simon Glass | 75e534b | 2020-12-16 21:20:07 -0700 | [diff] [blame] | 824 | int busnum = dev_seq(bus); |
Jassi Brar | 9c5cb7f | 2020-07-29 20:51:27 -0500 | [diff] [blame] | 825 | unsigned int cs; |
| 826 | uint speed, mode; |
| 827 | struct udevice *spid; |
| 828 | |
Simon Glass | 71fa5b4 | 2020-12-03 16:55:18 -0700 | [diff] [blame] | 829 | slave_pdata = dev_get_parent_plat(dev); |
Jassi Brar | 9c5cb7f | 2020-07-29 20:51:27 -0500 | [diff] [blame] | 830 | cs = slave_pdata->cs; |
| 831 | speed = slave_pdata->max_hz; |
| 832 | mode = slave_pdata->mode; |
Patrice Chotard | 86e06ae | 2022-03-30 09:33:13 +0200 | [diff] [blame] | 833 | _spi_get_bus_and_cs(busnum, cs, speed, mode, false, "spi_generic_drv", |
| 834 | NULL, &spid, &udc->slave); |
Jassi Brar | 9c5cb7f | 2020-07-29 20:51:27 -0500 | [diff] [blame] | 835 | |
| 836 | udc->dev = dev; |
| 837 | udc->gadget.ep0 = &udc->ep[0].ep_usb; |
| 838 | udc->gadget.max_speed = USB_SPEED_FULL; |
| 839 | udc->gadget.speed = USB_SPEED_FULL; |
| 840 | udc->gadget.is_dualspeed = 0; |
| 841 | udc->gadget.ops = &max3420_udc_ops; |
| 842 | udc->gadget.name = "max3420-udc"; |
| 843 | |
| 844 | max3420_setup_eps(udc); |
| 845 | max3420_setup_spi(udc); |
| 846 | |
| 847 | usb_add_gadget_udc((struct device *)dev, &udc->gadget); |
| 848 | |
| 849 | return 0; |
| 850 | } |
| 851 | |
| 852 | static int max3420_udc_remove(struct udevice *dev) |
| 853 | { |
| 854 | struct max3420_udc *udc = dev_get_priv(dev); |
| 855 | |
| 856 | usb_del_gadget_udc(&udc->gadget); |
| 857 | |
| 858 | spi_release_bus(udc->slave); |
| 859 | |
| 860 | return 0; |
| 861 | } |
| 862 | |
| 863 | static const struct udevice_id max3420_ids[] = { |
| 864 | { .compatible = "maxim,max3421-udc" }, |
| 865 | { } |
| 866 | }; |
| 867 | |
| 868 | U_BOOT_DRIVER(max3420_generic_udc) = { |
| 869 | .name = "max3420-udc", |
| 870 | .id = UCLASS_USB_GADGET_GENERIC, |
| 871 | .of_match = max3420_ids, |
| 872 | .probe = max3420_udc_probe, |
| 873 | .remove = max3420_udc_remove, |
Simon Glass | 8a2b47f | 2020-12-03 16:55:17 -0700 | [diff] [blame] | 874 | .priv_auto = sizeof(struct max3420_udc), |
Jassi Brar | 9c5cb7f | 2020-07-29 20:51:27 -0500 | [diff] [blame] | 875 | }; |