| Caleb Connolly | e5541ac | 2024-02-26 17:26:32 +0000 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* Copyright 2018 Google LLC. */ |
| 3 | |
| 4 | #include <dt-bindings/iio/qcom,spmi-vadc.h> |
| 5 | #include <dt-bindings/input/linux-event-codes.h> |
| 6 | #include <dt-bindings/interrupt-controller/irq.h> |
| 7 | #include <dt-bindings/spmi/spmi.h> |
| 8 | #include <dt-bindings/thermal/thermal.h> |
| 9 | |
| 10 | / { |
| 11 | thermal-zones { |
| 12 | pm8998-thermal { |
| 13 | polling-delay-passive = <250>; |
| 14 | polling-delay = <1000>; |
| 15 | |
| 16 | thermal-sensors = <&pm8998_temp>; |
| 17 | |
| 18 | trips { |
| 19 | pm8998_alert0: pm8998-alert0 { |
| 20 | temperature = <105000>; |
| 21 | hysteresis = <2000>; |
| 22 | type = "passive"; |
| 23 | }; |
| 24 | pm8998_crit: pm8998-crit { |
| 25 | temperature = <125000>; |
| 26 | hysteresis = <2000>; |
| 27 | type = "critical"; |
| 28 | }; |
| 29 | }; |
| 30 | }; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | &spmi_bus { |
| 35 | pm8998_lsid0: pmic@0 { |
| 36 | compatible = "qcom,pm8998", "qcom,spmi-pmic"; |
| 37 | reg = <0x0 SPMI_USID>; |
| 38 | #address-cells = <1>; |
| 39 | #size-cells = <0>; |
| 40 | |
| 41 | pm8998_pon: pon@800 { |
| 42 | compatible = "qcom,pm8998-pon"; |
| 43 | |
| 44 | reg = <0x800>; |
| 45 | mode-bootloader = <0x2>; |
| 46 | mode-recovery = <0x1>; |
| 47 | |
| 48 | pm8998_pwrkey: pwrkey { |
| 49 | compatible = "qcom,pm8941-pwrkey"; |
| 50 | interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; |
| 51 | debounce = <15625>; |
| 52 | bias-pull-up; |
| 53 | linux,code = <KEY_POWER>; |
| 54 | }; |
| 55 | |
| 56 | pm8998_resin: resin { |
| 57 | compatible = "qcom,pm8941-resin"; |
| 58 | interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; |
| 59 | debounce = <15625>; |
| 60 | bias-pull-up; |
| 61 | status = "disabled"; |
| 62 | }; |
| 63 | }; |
| 64 | |
| 65 | pm8998_temp: temp-alarm@2400 { |
| 66 | compatible = "qcom,spmi-temp-alarm"; |
| 67 | reg = <0x2400>; |
| 68 | interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; |
| 69 | io-channels = <&pm8998_adc ADC5_DIE_TEMP>; |
| 70 | io-channel-names = "thermal"; |
| 71 | #thermal-sensor-cells = <0>; |
| 72 | }; |
| 73 | |
| 74 | pm8998_coincell: charger@2800 { |
| 75 | compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; |
| 76 | reg = <0x2800>; |
| 77 | |
| 78 | status = "disabled"; |
| 79 | }; |
| 80 | |
| 81 | pm8998_adc: adc@3100 { |
| 82 | compatible = "qcom,spmi-adc-rev2"; |
| 83 | reg = <0x3100>; |
| 84 | interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| 85 | #address-cells = <1>; |
| 86 | #size-cells = <0>; |
| 87 | #io-channel-cells = <1>; |
| 88 | |
| 89 | channel@6 { |
| 90 | reg = <ADC5_DIE_TEMP>; |
| 91 | label = "die_temp"; |
| 92 | }; |
| 93 | }; |
| 94 | |
| 95 | pm8998_adc_tm: adc-tm@3400 { |
| 96 | compatible = "qcom,spmi-adc-tm-hc"; |
| 97 | reg = <0x3400>; |
| 98 | interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; |
| 99 | #thermal-sensor-cells = <1>; |
| 100 | #address-cells = <1>; |
| 101 | #size-cells = <0>; |
| 102 | status = "disabled"; |
| 103 | }; |
| 104 | |
| 105 | rtc@6000 { |
| 106 | compatible = "qcom,pm8941-rtc"; |
| 107 | reg = <0x6000>, <0x6100>; |
| 108 | reg-names = "rtc", "alarm"; |
| 109 | interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; |
| 110 | }; |
| 111 | |
| 112 | pm8998_gpios: gpio@c000 { |
| 113 | compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; |
| 114 | reg = <0xc000>; |
| 115 | gpio-controller; |
| 116 | gpio-ranges = <&pm8998_gpios 0 0 26>; |
| 117 | #gpio-cells = <2>; |
| 118 | interrupt-controller; |
| 119 | #interrupt-cells = <2>; |
| 120 | }; |
| 121 | |
| 122 | }; |
| 123 | |
| 124 | pm8998_lsid1: pmic@1 { |
| 125 | compatible = "qcom,pm8998", "qcom,spmi-pmic"; |
| 126 | reg = <0x1 SPMI_USID>; |
| 127 | #address-cells = <1>; |
| 128 | #size-cells = <0>; |
| 129 | }; |
| 130 | }; |