Ley Foon Tan | b149f2b | 2017-04-26 02:44:36 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012-2017 Altera Corporation <www.altera.com> |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <asm/io.h> |
| 9 | #include <errno.h> |
| 10 | #include <fdtdec.h> |
| 11 | #include <libfdt.h> |
| 12 | #include <altera.h> |
| 13 | #include <miiphy.h> |
| 14 | #include <netdev.h> |
| 15 | #include <watchdog.h> |
| 16 | #include <asm/arch/misc.h> |
| 17 | #include <asm/arch/reset_manager.h> |
| 18 | #include <asm/arch/scan_manager.h> |
| 19 | #include <asm/arch/sdram.h> |
| 20 | #include <asm/arch/system_manager.h> |
| 21 | #include <asm/arch/nic301.h> |
| 22 | #include <asm/arch/scu.h> |
| 23 | #include <asm/pl310.h> |
| 24 | |
| 25 | #include <dt-bindings/reset/altr,rst-mgr.h> |
| 26 | |
| 27 | DECLARE_GLOBAL_DATA_PTR; |
| 28 | |
| 29 | static struct pl310_regs *const pl310 = |
| 30 | (struct pl310_regs *)CONFIG_SYS_PL310_BASE; |
| 31 | static struct socfpga_system_manager *sysmgr_regs = |
| 32 | (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; |
| 33 | static struct socfpga_reset_manager *reset_manager_base = |
| 34 | (struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS; |
| 35 | static struct nic301_registers *nic301_regs = |
| 36 | (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS; |
| 37 | static struct scu_registers *scu_regs = |
| 38 | (struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS; |
| 39 | static struct socfpga_sdr_ctrl *sdr_ctrl = |
| 40 | (struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS; |
| 41 | |
| 42 | /* |
| 43 | * DesignWare Ethernet initialization |
| 44 | */ |
| 45 | #ifdef CONFIG_ETH_DESIGNWARE |
| 46 | void dwmac_deassert_reset(const unsigned int of_reset_id, |
| 47 | const u32 phymode) |
| 48 | { |
| 49 | u32 physhift, reset; |
| 50 | |
| 51 | if (of_reset_id == EMAC0_RESET) { |
| 52 | physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB; |
| 53 | reset = SOCFPGA_RESET(EMAC0); |
| 54 | } else if (of_reset_id == EMAC1_RESET) { |
| 55 | physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB; |
| 56 | reset = SOCFPGA_RESET(EMAC1); |
| 57 | } else { |
| 58 | printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id); |
| 59 | return; |
| 60 | } |
| 61 | |
| 62 | /* configure to PHY interface select choosed */ |
| 63 | clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl, |
| 64 | SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift, |
| 65 | phymode << physhift); |
| 66 | |
| 67 | /* Release the EMAC controller from reset */ |
| 68 | socfpga_per_reset(reset, 0); |
| 69 | } |
| 70 | |
| 71 | static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg) |
| 72 | { |
| 73 | if (!phymode) |
| 74 | return -EINVAL; |
| 75 | |
| 76 | if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) { |
| 77 | *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII; |
| 78 | return 0; |
| 79 | } |
| 80 | |
| 81 | if (!strcmp(phymode, "rgmii")) { |
| 82 | *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII; |
| 83 | return 0; |
| 84 | } |
| 85 | |
| 86 | if (!strcmp(phymode, "rmii")) { |
| 87 | *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII; |
| 88 | return 0; |
| 89 | } |
| 90 | |
| 91 | return -EINVAL; |
| 92 | } |
| 93 | |
| 94 | static int socfpga_eth_reset(void) |
| 95 | { |
| 96 | const void *fdt = gd->fdt_blob; |
| 97 | struct fdtdec_phandle_args args; |
| 98 | const char *phy_mode; |
| 99 | u32 phy_modereg; |
| 100 | int nodes[2]; /* Max. two GMACs */ |
| 101 | int ret, count; |
| 102 | int i, node; |
| 103 | |
| 104 | /* Put both GMACs into RESET state. */ |
| 105 | socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1); |
| 106 | socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1); |
| 107 | |
| 108 | count = fdtdec_find_aliases_for_id(fdt, "ethernet", |
| 109 | COMPAT_ALTERA_SOCFPGA_DWMAC, |
| 110 | nodes, ARRAY_SIZE(nodes)); |
| 111 | for (i = 0; i < count; i++) { |
| 112 | node = nodes[i]; |
| 113 | if (node <= 0) |
| 114 | continue; |
| 115 | |
| 116 | ret = fdtdec_parse_phandle_with_args(fdt, node, "resets", |
| 117 | "#reset-cells", 1, 0, |
| 118 | &args); |
| 119 | if (ret || (args.args_count != 1)) { |
| 120 | debug("GMAC%i: Failed to parse DT 'resets'!\n", i); |
| 121 | continue; |
| 122 | } |
| 123 | |
| 124 | phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL); |
| 125 | ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg); |
| 126 | if (ret) { |
| 127 | debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i); |
| 128 | continue; |
| 129 | } |
| 130 | |
| 131 | dwmac_deassert_reset(args.args[0], phy_modereg); |
| 132 | } |
| 133 | |
| 134 | return 0; |
| 135 | } |
| 136 | #else |
| 137 | static int socfpga_eth_reset(void) |
| 138 | { |
| 139 | return 0; |
| 140 | }; |
| 141 | #endif |
| 142 | |
| 143 | static const struct { |
| 144 | const u16 pn; |
| 145 | const char *name; |
| 146 | const char *var; |
Masahiro Yamada | 2337ebe | 2017-09-12 17:23:39 +0900 | [diff] [blame] | 147 | } socfpga_fpga_model[] = { |
Ley Foon Tan | b149f2b | 2017-04-26 02:44:36 +0800 | [diff] [blame] | 148 | /* Cyclone V E */ |
| 149 | { 0x2b15, "Cyclone V, E/A2", "cv_e_a2" }, |
| 150 | { 0x2b05, "Cyclone V, E/A4", "cv_e_a4" }, |
| 151 | { 0x2b22, "Cyclone V, E/A5", "cv_e_a5" }, |
| 152 | { 0x2b13, "Cyclone V, E/A7", "cv_e_a7" }, |
| 153 | { 0x2b14, "Cyclone V, E/A9", "cv_e_a9" }, |
| 154 | /* Cyclone V GX/GT */ |
| 155 | { 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" }, |
| 156 | { 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" }, |
| 157 | { 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" }, |
| 158 | { 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" }, |
| 159 | { 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" }, |
| 160 | /* Cyclone V SE/SX/ST */ |
| 161 | { 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" }, |
| 162 | { 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" }, |
| 163 | { 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" }, |
| 164 | { 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" }, |
| 165 | /* Arria V */ |
| 166 | { 0x2d03, "Arria V, D5", "av_d5" }, |
| 167 | }; |
| 168 | |
| 169 | static int socfpga_fpga_id(const bool print_id) |
| 170 | { |
| 171 | const u32 altera_mi = 0x6e; |
| 172 | const u32 id = scan_mgr_get_fpga_id(); |
| 173 | |
| 174 | const u32 lsb = id & 0x00000001; |
| 175 | const u32 mi = (id >> 1) & 0x000007ff; |
| 176 | const u32 pn = (id >> 12) & 0x0000ffff; |
| 177 | const u32 version = (id >> 28) & 0x0000000f; |
| 178 | int i; |
| 179 | |
| 180 | if ((mi != altera_mi) || (lsb != 1)) { |
| 181 | printf("FPGA: Not Altera chip ID\n"); |
| 182 | return -EINVAL; |
| 183 | } |
| 184 | |
| 185 | for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++) |
| 186 | if (pn == socfpga_fpga_model[i].pn) |
| 187 | break; |
| 188 | |
| 189 | if (i == ARRAY_SIZE(socfpga_fpga_model)) { |
| 190 | printf("FPGA: Unknown Altera chip, ID 0x%08x\n", id); |
| 191 | return -EINVAL; |
| 192 | } |
| 193 | |
| 194 | if (print_id) |
| 195 | printf("FPGA: Altera %s, version 0x%01x\n", |
| 196 | socfpga_fpga_model[i].name, version); |
| 197 | return i; |
| 198 | } |
| 199 | |
| 200 | /* |
| 201 | * Print CPU information |
| 202 | */ |
| 203 | #if defined(CONFIG_DISPLAY_CPUINFO) |
| 204 | int print_cpuinfo(void) |
| 205 | { |
| 206 | const u32 bsel = |
| 207 | SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo)); |
| 208 | |
| 209 | puts("CPU: Altera SoCFPGA Platform\n"); |
| 210 | socfpga_fpga_id(1); |
| 211 | |
| 212 | printf("BOOT: %s\n", bsel_str[bsel].name); |
| 213 | return 0; |
| 214 | } |
| 215 | #endif |
| 216 | |
| 217 | #ifdef CONFIG_ARCH_MISC_INIT |
| 218 | int arch_misc_init(void) |
| 219 | { |
| 220 | const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7; |
| 221 | const int fpga_id = socfpga_fpga_id(0); |
Simon Glass | 6a38e41 | 2017-08-03 12:22:09 -0600 | [diff] [blame] | 222 | env_set("bootmode", bsel_str[bsel].mode); |
Ley Foon Tan | b149f2b | 2017-04-26 02:44:36 +0800 | [diff] [blame] | 223 | if (fpga_id >= 0) |
Simon Glass | 6a38e41 | 2017-08-03 12:22:09 -0600 | [diff] [blame] | 224 | env_set("fpgatype", socfpga_fpga_model[fpga_id].var); |
Ley Foon Tan | b149f2b | 2017-04-26 02:44:36 +0800 | [diff] [blame] | 225 | return socfpga_eth_reset(); |
| 226 | } |
| 227 | #endif |
| 228 | |
| 229 | /* |
| 230 | * Convert all NIC-301 AMBA slaves from secure to non-secure |
| 231 | */ |
| 232 | static void socfpga_nic301_slave_ns(void) |
| 233 | { |
| 234 | writel(0x1, &nic301_regs->lwhps2fpgaregs); |
| 235 | writel(0x1, &nic301_regs->hps2fpgaregs); |
| 236 | writel(0x1, &nic301_regs->acp); |
| 237 | writel(0x1, &nic301_regs->rom); |
| 238 | writel(0x1, &nic301_regs->ocram); |
| 239 | writel(0x1, &nic301_regs->sdrdata); |
| 240 | } |
| 241 | |
| 242 | static u32 iswgrp_handoff[8]; |
| 243 | |
| 244 | int arch_early_init_r(void) |
| 245 | { |
| 246 | int i; |
| 247 | |
| 248 | /* |
| 249 | * Write magic value into magic register to unlock support for |
| 250 | * issuing warm reset. The ancient kernel code expects this |
| 251 | * value to be written into the register by the bootloader, so |
| 252 | * to support that old code, we write it here instead of in the |
| 253 | * reset_cpu() function just before resetting the CPU. |
| 254 | */ |
| 255 | writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable); |
| 256 | |
| 257 | for (i = 0; i < 8; i++) /* Cache initial SW setting regs */ |
| 258 | iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]); |
| 259 | |
| 260 | socfpga_bridges_reset(1); |
| 261 | |
| 262 | socfpga_nic301_slave_ns(); |
| 263 | |
| 264 | /* |
| 265 | * Private components security: |
| 266 | * U-Boot : configure private timer, global timer and cpu component |
| 267 | * access as non secure for kernel stage (as required by Linux) |
| 268 | */ |
| 269 | setbits_le32(&scu_regs->sacr, 0xfff); |
| 270 | |
| 271 | /* Configure the L2 controller to make SDRAM start at 0 */ |
| 272 | #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET |
| 273 | writel(0x2, &nic301_regs->remap); |
| 274 | #else |
| 275 | writel(0x1, &nic301_regs->remap); /* remap.mpuzero */ |
| 276 | writel(0x1, &pl310->pl310_addr_filter_start); |
| 277 | #endif |
| 278 | |
| 279 | /* Add device descriptor to FPGA device table */ |
| 280 | socfpga_fpga_add(); |
| 281 | |
| 282 | #ifdef CONFIG_DESIGNWARE_SPI |
| 283 | /* Get Designware SPI controller out of reset */ |
| 284 | socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0); |
| 285 | socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0); |
| 286 | #endif |
| 287 | |
| 288 | #ifdef CONFIG_NAND_DENALI |
| 289 | socfpga_per_reset(SOCFPGA_RESET(NAND), 0); |
| 290 | #endif |
| 291 | |
| 292 | return 0; |
| 293 | } |
| 294 | |
| 295 | static void socfpga_sdram_apply_static_cfg(void) |
| 296 | { |
| 297 | const u32 applymask = 0x8; |
| 298 | u32 val = readl(&sdr_ctrl->static_cfg) | applymask; |
| 299 | |
| 300 | /* |
| 301 | * SDRAM staticcfg register specific: |
| 302 | * When applying the register setting, the CPU must not access |
| 303 | * SDRAM. Luckily for us, we can abuse i-cache here to help us |
| 304 | * circumvent the SDRAM access issue. The idea is to make sure |
| 305 | * that the code is in one full i-cache line by branching past |
| 306 | * it and back. Once it is in the i-cache, we execute the core |
| 307 | * of the code and apply the register settings. |
| 308 | * |
| 309 | * The code below uses 7 instructions, while the Cortex-A9 has |
| 310 | * 32-byte cachelines, thus the limit is 8 instructions total. |
| 311 | */ |
| 312 | asm volatile( |
| 313 | ".align 5 \n" |
| 314 | " b 2f \n" |
| 315 | "1: str %0, [%1] \n" |
| 316 | " dsb \n" |
| 317 | " isb \n" |
| 318 | " b 3f \n" |
| 319 | "2: b 1b \n" |
| 320 | "3: nop \n" |
| 321 | : : "r"(val), "r"(&sdr_ctrl->static_cfg) : "memory", "cc"); |
| 322 | } |
| 323 | |
| 324 | int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| 325 | { |
| 326 | if (argc != 2) |
| 327 | return CMD_RET_USAGE; |
| 328 | |
| 329 | argv++; |
| 330 | |
| 331 | switch (*argv[0]) { |
| 332 | case 'e': /* Enable */ |
| 333 | writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module); |
| 334 | socfpga_sdram_apply_static_cfg(); |
| 335 | writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst); |
| 336 | writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset); |
| 337 | writel(iswgrp_handoff[1], &nic301_regs->remap); |
| 338 | break; |
| 339 | case 'd': /* Disable */ |
| 340 | writel(0, &sysmgr_regs->fpgaintfgrp_module); |
| 341 | writel(0, &sdr_ctrl->fpgaport_rst); |
| 342 | socfpga_sdram_apply_static_cfg(); |
| 343 | writel(0, &reset_manager_base->brg_mod_reset); |
| 344 | writel(1, &nic301_regs->remap); |
| 345 | break; |
| 346 | default: |
| 347 | return CMD_RET_USAGE; |
| 348 | } |
| 349 | |
| 350 | return 0; |
| 351 | } |
| 352 | |
| 353 | U_BOOT_CMD( |
| 354 | bridge, 2, 1, do_bridge, |
| 355 | "SoCFPGA HPS FPGA bridge control", |
| 356 | "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" |
| 357 | "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" |
| 358 | "" |
| 359 | ); |