blob: 26a9cfc68bf33ff90bac65008b8b4b4e5add5486 [file] [log] [blame]
Oliver Schinagl4f9a0082013-07-25 14:07:42 +02001/*
2 * Sunxi A31 Power Management Unit
3 *
4 * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
5 * http://linux-sunxi.org
6 *
7 * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
8 *
9 * (C) Copyright 2006-2013
10 * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
11 * Berg Xing <bergxing@allwinnertech.com>
12 * Tom Cubie <tangliang@allwinnertech.com>
13 *
14 * SPDX-License-Identifier: GPL-2.0+
15 */
16
17#include <common.h>
18#include <errno.h>
19#include <asm/io.h>
20#include <asm/arch/cpu.h>
21#include <asm/arch/gpio.h>
22#include <asm/arch/p2wi.h>
23#include <asm/arch/prcm.h>
24#include <asm/arch/clock.h>
25#include <asm/arch/sys_proto.h>
26
27void p2wi_init(void)
28{
Hans de Goede7c590382014-12-13 10:25:14 +010029 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
Oliver Schinagl4f9a0082013-07-25 14:07:42 +020030
31 /* Enable p2wi and PIO clk, and de-assert their resets */
32 prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_P2WI);
33
Hans de Goede7c590382014-12-13 10:25:14 +010034 sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN6I_GPL0_R_P2WI_SCK);
35 sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN6I_GPL1_R_P2WI_SDA);
Oliver Schinagl4f9a0082013-07-25 14:07:42 +020036
37 /* Reset p2wi controller and set clock to CLKIN(12)/8 = 1.5 MHz */
38 writel(P2WI_CTRL_RESET, &p2wi->ctrl);
39 sdelay(0x100);
40 writel(P2WI_CC_SDA_OUT_DELAY(1) | P2WI_CC_CLK_DIV(8),
41 &p2wi->cc);
42}
43
44int p2wi_change_to_p2wi_mode(u8 slave_addr, u8 ctrl_reg, u8 init_data)
45{
Hans de Goede7c590382014-12-13 10:25:14 +010046 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
Oliver Schinagl4f9a0082013-07-25 14:07:42 +020047 unsigned long tmo = timer_get_us() + 1000000;
48
49 writel(P2WI_PM_DEV_ADDR(slave_addr) |
50 P2WI_PM_CTRL_ADDR(ctrl_reg) |
51 P2WI_PM_INIT_DATA(init_data) |
52 P2WI_PM_INIT_SEND,
53 &p2wi->pm);
54
55 while ((readl(&p2wi->pm) & P2WI_PM_INIT_SEND)) {
56 if (timer_get_us() > tmo)
57 return -ETIME;
58 }
59
60 return 0;
61}
62
63static int p2wi_await_trans(void)
64{
Hans de Goede7c590382014-12-13 10:25:14 +010065 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
Oliver Schinagl4f9a0082013-07-25 14:07:42 +020066 unsigned long tmo = timer_get_us() + 1000000;
67 int ret;
68 u8 reg;
69
70 while (1) {
71 reg = readl(&p2wi->status);
72 if (reg & P2WI_STAT_TRANS_ERR) {
73 ret = -EIO;
74 break;
75 }
76 if (reg & P2WI_STAT_TRANS_DONE) {
77 ret = 0;
78 break;
79 }
80 if (timer_get_us() > tmo) {
81 ret = -ETIME;
82 break;
83 }
84 }
85 writel(reg, &p2wi->status); /* Clear status bits */
86 return ret;
87}
88
89int p2wi_read(const u8 addr, u8 *data)
90{
Hans de Goede7c590382014-12-13 10:25:14 +010091 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
Oliver Schinagl4f9a0082013-07-25 14:07:42 +020092 int ret;
93
94 writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
95 writel(P2WI_DATA_NUM_BYTES(1) |
96 P2WI_DATA_NUM_BYTES_READ, &p2wi->numbytes);
97 writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
98 writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
99
100 ret = p2wi_await_trans();
101
102 *data = readl(&p2wi->data0) & P2WI_DATA_BYTE_1_MASK;
103 return ret;
104}
105
106int p2wi_write(const u8 addr, u8 data)
107{
Hans de Goede7c590382014-12-13 10:25:14 +0100108 struct sunxi_p2wi_reg *p2wi = (struct sunxi_p2wi_reg *)SUN6I_P2WI_BASE;
Oliver Schinagl4f9a0082013-07-25 14:07:42 +0200109
110 writel(P2WI_DATADDR_BYTE_1(addr), &p2wi->dataddr0);
111 writel(P2WI_DATA_BYTE_1(data), &p2wi->data0);
112 writel(P2WI_DATA_NUM_BYTES(1), &p2wi->numbytes);
113 writel(P2WI_STAT_TRANS_DONE, &p2wi->status);
114 writel(P2WI_CTRL_TRANS_START, &p2wi->ctrl);
115
116 return p2wi_await_trans();
117}