Hans de Goede | 966d239 | 2014-12-07 14:34:27 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Sun8i platform dram controller init. |
| 3 | * |
| 4 | * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> |
| 5 | * |
| 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 7 | */ |
| 8 | |
| 9 | /* |
| 10 | * Note this code uses a lot of magic hex values, that is because this code |
| 11 | * simply replays the init sequence as done by the Allwinner boot0 code, so |
| 12 | * we do not know what these values mean. There are no symbolic constants for |
| 13 | * these magic values, since we do not know how to name them and making up |
| 14 | * names for them is not useful. |
| 15 | * |
| 16 | * The register-layout of the sunxi_mctl_phy_reg-s looks a lot like the one |
| 17 | * found in the TI Keystone2 documentation: |
| 18 | * http://www.ti.com/lit/ug/spruhn7a/spruhn7a.pdf |
| 19 | * "Table4-2 DDR3 PHY Registers" |
| 20 | * This may be used as a (possible) reference for future work / cleanups. |
| 21 | */ |
| 22 | |
| 23 | #include <common.h> |
| 24 | #include <errno.h> |
| 25 | #include <asm/io.h> |
| 26 | #include <asm/arch/clock.h> |
| 27 | #include <asm/arch/dram.h> |
| 28 | #include <asm/arch/prcm.h> |
| 29 | |
| 30 | static const struct dram_para dram_para = { |
| 31 | .clock = CONFIG_DRAM_CLK, |
| 32 | .type = 3, |
| 33 | .zq = CONFIG_DRAM_ZQ, |
Hans de Goede | ffdc05c | 2015-05-13 15:00:46 +0200 | [diff] [blame] | 34 | .odt_en = IS_ENABLED(CONFIG_DRAM_ODT_EN), |
| 35 | .odt_correction = CONFIG_DRAM_ODT_CORRECTION, |
Hans de Goede | 966d239 | 2014-12-07 14:34:27 +0100 | [diff] [blame] | 36 | .para1 = 0, /* not used (only used when tpr13 bit 31 is set */ |
| 37 | .para2 = 0, /* not used (only used when tpr13 bit 31 is set */ |
| 38 | .mr0 = 6736, |
| 39 | .mr1 = 4, |
| 40 | .mr2 = 16, |
| 41 | .mr3 = 0, |
| 42 | /* tpr0 - 10 contain timing constants or-ed together in u32 vals */ |
| 43 | .tpr0 = 0x2ab83def, |
| 44 | .tpr1 = 0x18082356, |
| 45 | .tpr2 = 0x00034156, |
| 46 | .tpr3 = 0x448c5533, |
| 47 | .tpr4 = 0x08010d00, |
| 48 | .tpr5 = 0x0340b20f, |
| 49 | .tpr6 = 0x20d118cc, |
| 50 | .tpr7 = 0x14062485, |
| 51 | .tpr8 = 0x220d1d52, |
| 52 | .tpr9 = 0x1e078c22, |
| 53 | .tpr10 = 0x3c, |
| 54 | .tpr11 = 0, /* not used */ |
| 55 | .tpr12 = 0, /* not used */ |
| 56 | .tpr13 = 0x30000, |
| 57 | }; |
| 58 | |
| 59 | static void mctl_sys_init(void) |
| 60 | { |
| 61 | struct sunxi_ccm_reg * const ccm = |
| 62 | (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| 63 | |
| 64 | /* enable pll5, note the divide by 2 is deliberate! */ |
| 65 | clock_set_pll5(dram_para.clock * 1000000 / 2, |
| 66 | dram_para.tpr13 & 0x40000); |
| 67 | |
| 68 | /* deassert ahb mctl reset */ |
| 69 | setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL); |
| 70 | |
| 71 | /* enable ahb mctl clock */ |
| 72 | setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL); |
| 73 | } |
| 74 | |
| 75 | static void mctl_apply_odt_correction(u32 *reg, int correction) |
| 76 | { |
| 77 | int val; |
| 78 | |
| 79 | val = (readl(reg) >> 8) & 0xff; |
| 80 | val += correction; |
| 81 | |
| 82 | /* clamp */ |
| 83 | if (val < 0) |
| 84 | val = 0; |
| 85 | else if (val > 255) |
| 86 | val = 255; |
| 87 | |
| 88 | clrsetbits_le32(reg, 0xff00, val << 8); |
| 89 | } |
| 90 | |
| 91 | static void mctl_init(u32 *bus_width) |
| 92 | { |
| 93 | struct sunxi_ccm_reg * const ccm = |
| 94 | (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; |
| 95 | struct sunxi_mctl_com_reg * const mctl_com = |
| 96 | (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; |
| 97 | struct sunxi_mctl_ctl_reg * const mctl_ctl = |
| 98 | (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; |
| 99 | struct sunxi_mctl_phy_reg * const mctl_phy = |
| 100 | (struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE; |
Hans de Goede | 966d239 | 2014-12-07 14:34:27 +0100 | [diff] [blame] | 101 | |
| 102 | if (dram_para.tpr13 & 0x20) |
| 103 | writel(0x40b, &mctl_phy->dcr); |
| 104 | else |
| 105 | writel(0x1000040b, &mctl_phy->dcr); |
| 106 | |
| 107 | if (dram_para.clock >= 480) |
| 108 | writel(0x5c000, &mctl_phy->dllgcr); |
| 109 | else |
| 110 | writel(0xdc000, &mctl_phy->dllgcr); |
| 111 | |
| 112 | writel(0x0a003e3f, &mctl_phy->pgcr0); |
| 113 | writel(0x03008421, &mctl_phy->pgcr1); |
| 114 | |
| 115 | writel(dram_para.mr0, &mctl_phy->mr0); |
| 116 | writel(dram_para.mr1, &mctl_phy->mr1); |
| 117 | writel(dram_para.mr2, &mctl_phy->mr2); |
| 118 | writel(dram_para.mr3, &mctl_phy->mr3); |
| 119 | |
| 120 | if (!(dram_para.tpr13 & 0x10000)) { |
| 121 | clrsetbits_le32(&mctl_phy->dx0gcr, 0x3800, 0x2000); |
| 122 | clrsetbits_le32(&mctl_phy->dx1gcr, 0x3800, 0x2000); |
| 123 | } |
| 124 | |
| 125 | /* |
| 126 | * All the masking and shifting below converts what I assume are DDR |
| 127 | * timing constants from Allwinner dram_para tpr format to the actual |
| 128 | * timing registers format. |
| 129 | */ |
| 130 | |
| 131 | writel((dram_para.tpr0 & 0x000fffff), &mctl_phy->ptr2); |
| 132 | writel((dram_para.tpr1 & 0x1fffffff), &mctl_phy->ptr3); |
| 133 | writel((dram_para.tpr0 & 0x3ff00000) >> 2 | |
| 134 | (dram_para.tpr2 & 0x0003ffff), &mctl_phy->ptr4); |
| 135 | |
| 136 | writel(dram_para.tpr3, &mctl_phy->dtpr0); |
| 137 | writel(dram_para.tpr4, &mctl_phy->dtpr2); |
| 138 | |
| 139 | writel(0x01000081, &mctl_phy->dtcr); |
| 140 | |
Hans de Goede | ffdc05c | 2015-05-13 15:00:46 +0200 | [diff] [blame] | 141 | if (dram_para.clock <= 240 || !dram_para.odt_en) { |
Hans de Goede | 966d239 | 2014-12-07 14:34:27 +0100 | [diff] [blame] | 142 | clrbits_le32(&mctl_phy->dx0gcr, 0x600); |
| 143 | clrbits_le32(&mctl_phy->dx1gcr, 0x600); |
| 144 | } |
| 145 | if (dram_para.clock <= 240) { |
| 146 | writel(0, &mctl_phy->odtcr); |
| 147 | writel(0, &mctl_ctl->odtmap); |
| 148 | } |
| 149 | |
| 150 | writel(((dram_para.tpr5 & 0x0f00) << 12) | |
| 151 | ((dram_para.tpr5 & 0x00f8) << 9) | |
| 152 | ((dram_para.tpr5 & 0x0007) << 8), |
| 153 | &mctl_ctl->rfshctl0); |
| 154 | |
| 155 | writel(((dram_para.tpr5 & 0x0003f000) << 12) | |
| 156 | ((dram_para.tpr5 & 0x00fc0000) >> 2) | |
| 157 | ((dram_para.tpr5 & 0x3f000000) >> 16) | |
| 158 | ((dram_para.tpr6 & 0x0000003f) >> 0), |
| 159 | &mctl_ctl->dramtmg0); |
| 160 | |
| 161 | writel(((dram_para.tpr6 & 0x000007c0) << 10) | |
| 162 | ((dram_para.tpr6 & 0x0000f800) >> 3) | |
| 163 | ((dram_para.tpr6 & 0x003f0000) >> 16), |
| 164 | &mctl_ctl->dramtmg1); |
| 165 | |
| 166 | writel(((dram_para.tpr6 & 0x0fc00000) << 2) | |
| 167 | ((dram_para.tpr7 & 0x0000001f) << 16) | |
| 168 | ((dram_para.tpr7 & 0x000003e0) << 3) | |
| 169 | ((dram_para.tpr7 & 0x0000fc00) >> 10), |
| 170 | &mctl_ctl->dramtmg2); |
| 171 | |
| 172 | writel(((dram_para.tpr7 & 0x03ff0000) >> 16) | |
| 173 | ((dram_para.tpr6 & 0xf0000000) >> 16), |
| 174 | &mctl_ctl->dramtmg3); |
| 175 | |
| 176 | writel(((dram_para.tpr7 & 0x3c000000) >> 2 ) | |
| 177 | ((dram_para.tpr8 & 0x00000007) << 16) | |
| 178 | ((dram_para.tpr8 & 0x00000038) << 5) | |
| 179 | ((dram_para.tpr8 & 0x000003c0) >> 6), |
| 180 | &mctl_ctl->dramtmg4); |
| 181 | |
| 182 | writel(((dram_para.tpr8 & 0x00003c00) << 14) | |
| 183 | ((dram_para.tpr8 & 0x0003c000) << 2) | |
| 184 | ((dram_para.tpr8 & 0x00fc0000) >> 10) | |
| 185 | ((dram_para.tpr8 & 0x0f000000) >> 24), |
| 186 | &mctl_ctl->dramtmg5); |
| 187 | |
| 188 | writel(0x00000008, &mctl_ctl->dramtmg8); |
| 189 | |
| 190 | writel(((dram_para.tpr8 & 0xf0000000) >> 4) | |
| 191 | ((dram_para.tpr9 & 0x00007c00) << 6) | |
| 192 | ((dram_para.tpr9 & 0x000003e0) << 3) | |
| 193 | ((dram_para.tpr9 & 0x0000001f) >> 0), |
| 194 | &mctl_ctl->pitmg0); |
| 195 | |
| 196 | setbits_le32(&mctl_ctl->pitmg1, 0x80000); |
| 197 | |
| 198 | writel(((dram_para.tpr9 & 0x003f8000) << 9) | 0x2001, |
| 199 | &mctl_ctl->sched); |
| 200 | |
| 201 | writel((dram_para.mr0 << 16) | dram_para.mr1, &mctl_ctl->init3); |
| 202 | writel((dram_para.mr2 << 16) | dram_para.mr3, &mctl_ctl->init4); |
| 203 | |
| 204 | writel(0x00000000, &mctl_ctl->pimisc); |
| 205 | writel(0x80000000, &mctl_ctl->upd0); |
| 206 | |
| 207 | writel(((dram_para.tpr9 & 0xffc00000) >> 22) | |
| 208 | ((dram_para.tpr10 & 0x00000fff) << 16), |
| 209 | &mctl_ctl->rfshtmg); |
| 210 | |
| 211 | if (dram_para.tpr13 & 0x20) |
| 212 | writel(0x01040001, &mctl_ctl->mstr); |
| 213 | else |
| 214 | writel(0x01040401, &mctl_ctl->mstr); |
| 215 | |
| 216 | if (!(dram_para.tpr13 & 0x20000)) { |
| 217 | writel(0x00000002, &mctl_ctl->pwrctl); |
| 218 | writel(0x00008001, &mctl_ctl->pwrtmg); |
| 219 | } |
| 220 | |
| 221 | writel(0x00000001, &mctl_ctl->rfshctl3); |
| 222 | writel(0x00000001, &mctl_ctl->pimisc); |
| 223 | |
| 224 | /* deassert dram_clk_cfg reset */ |
| 225 | setbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST); |
| 226 | |
| 227 | setbits_le32(&mctl_com->ccr, 0x80000); |
| 228 | |
| 229 | /* zq stuff */ |
| 230 | writel((dram_para.zq >> 8) & 0xff, &mctl_phy->zqcr1); |
| 231 | |
| 232 | writel(0x00000003, &mctl_phy->pir); |
| 233 | udelay(10); |
| 234 | mctl_await_completion(&mctl_phy->pgsr0, 0x09, 0x09); |
| 235 | |
| 236 | writel(readl(&mctl_phy->zqsr0) | 0x10000000, &mctl_phy->zqcr2); |
| 237 | writel(dram_para.zq & 0xff, &mctl_phy->zqcr1); |
| 238 | |
| 239 | /* A23-v1.0 SDK uses 0xfdf3, A23-v2.0 SDK uses 0x5f3 */ |
| 240 | writel(0x000005f3, &mctl_phy->pir); |
| 241 | udelay(10); |
| 242 | mctl_await_completion(&mctl_phy->pgsr0, 0x03, 0x03); |
| 243 | |
| 244 | if (readl(&mctl_phy->dx1gsr0) & 0x1000000) { |
| 245 | *bus_width = 8; |
| 246 | writel(0, &mctl_phy->dx1gcr); |
| 247 | writel(dram_para.zq & 0xff, &mctl_phy->zqcr1); |
| 248 | writel(0x5f3, &mctl_phy->pir); |
| 249 | udelay(10000); |
| 250 | setbits_le32(&mctl_ctl->mstr, 0x1000); |
| 251 | } else |
| 252 | *bus_width = 16; |
| 253 | |
Hans de Goede | ffdc05c | 2015-05-13 15:00:46 +0200 | [diff] [blame] | 254 | if (dram_para.odt_correction) { |
| 255 | mctl_apply_odt_correction(&mctl_phy->dx0lcdlr1, |
| 256 | dram_para.odt_correction); |
| 257 | mctl_apply_odt_correction(&mctl_phy->dx1lcdlr1, |
| 258 | dram_para.odt_correction); |
Hans de Goede | 966d239 | 2014-12-07 14:34:27 +0100 | [diff] [blame] | 259 | } |
| 260 | |
| 261 | mctl_await_completion(&mctl_ctl->statr, 0x01, 0x01); |
| 262 | |
| 263 | writel(0x08003e3f, &mctl_phy->pgcr0); |
| 264 | writel(0x00000000, &mctl_ctl->rfshctl3); |
| 265 | } |
| 266 | |
| 267 | unsigned long sunxi_dram_init(void) |
| 268 | { |
| 269 | struct sunxi_mctl_com_reg * const mctl_com = |
| 270 | (struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE; |
| 271 | const u32 columns = 13; |
| 272 | u32 bus, bus_width, offset, page_size, rows; |
| 273 | |
| 274 | mctl_sys_init(); |
| 275 | mctl_init(&bus_width); |
| 276 | |
| 277 | if (bus_width == 16) { |
| 278 | page_size = 8; |
| 279 | bus = 1; |
| 280 | } else { |
| 281 | page_size = 7; |
| 282 | bus = 0; |
| 283 | } |
| 284 | |
| 285 | if (!(dram_para.tpr13 & 0x80000000)) { |
| 286 | /* Detect and set rows */ |
| 287 | writel(0x000310f4 | MCTL_CR_PAGE_SIZE(page_size), |
| 288 | &mctl_com->cr); |
| 289 | setbits_le32(&mctl_com->swonr, 0x0003ffff); |
Hans de Goede | 966d239 | 2014-12-07 14:34:27 +0100 | [diff] [blame] | 290 | for (rows = 11; rows < 16; rows++) { |
| 291 | offset = 1 << (rows + columns + bus); |
| 292 | if (mctl_mem_matches(offset)) |
| 293 | break; |
| 294 | } |
| 295 | clrsetbits_le32(&mctl_com->cr, MCTL_CR_ROW_MASK, |
| 296 | MCTL_CR_ROW(rows)); |
| 297 | } else { |
| 298 | rows = (dram_para.para1 >> 16) & 0xff; |
| 299 | writel(((dram_para.para2 & 0x000000f0) << 11) | |
| 300 | ((rows - 1) << 4) | |
| 301 | ((dram_para.para1 & 0x0f000000) >> 22) | |
| 302 | 0x31000 | MCTL_CR_PAGE_SIZE(page_size), |
| 303 | &mctl_com->cr); |
| 304 | setbits_le32(&mctl_com->swonr, 0x0003ffff); |
| 305 | } |
| 306 | |
| 307 | /* Setup DRAM master priority? If this is left out things still work */ |
| 308 | writel(0x00000008, &mctl_com->mcr0_0); |
| 309 | writel(0x0001000d, &mctl_com->mcr1_0); |
| 310 | writel(0x00000004, &mctl_com->mcr0_1); |
| 311 | writel(0x00000080, &mctl_com->mcr1_1); |
| 312 | writel(0x00000004, &mctl_com->mcr0_2); |
| 313 | writel(0x00000019, &mctl_com->mcr1_2); |
| 314 | writel(0x00000004, &mctl_com->mcr0_3); |
| 315 | writel(0x00000080, &mctl_com->mcr1_3); |
| 316 | writel(0x00000004, &mctl_com->mcr0_4); |
| 317 | writel(0x01010040, &mctl_com->mcr1_4); |
| 318 | writel(0x00000004, &mctl_com->mcr0_5); |
| 319 | writel(0x0001002f, &mctl_com->mcr1_5); |
| 320 | writel(0x00000004, &mctl_com->mcr0_6); |
| 321 | writel(0x00010020, &mctl_com->mcr1_6); |
| 322 | writel(0x00000004, &mctl_com->mcr0_7); |
| 323 | writel(0x00010020, &mctl_com->mcr1_7); |
| 324 | writel(0x00000008, &mctl_com->mcr0_8); |
| 325 | writel(0x00000001, &mctl_com->mcr1_8); |
| 326 | writel(0x00000008, &mctl_com->mcr0_9); |
| 327 | writel(0x00000005, &mctl_com->mcr1_9); |
| 328 | writel(0x00000008, &mctl_com->mcr0_10); |
| 329 | writel(0x00000003, &mctl_com->mcr1_10); |
| 330 | writel(0x00000008, &mctl_com->mcr0_11); |
| 331 | writel(0x00000005, &mctl_com->mcr1_11); |
| 332 | writel(0x00000008, &mctl_com->mcr0_12); |
| 333 | writel(0x00000003, &mctl_com->mcr1_12); |
| 334 | writel(0x00000008, &mctl_com->mcr0_13); |
| 335 | writel(0x00000004, &mctl_com->mcr1_13); |
| 336 | writel(0x00000008, &mctl_com->mcr0_14); |
| 337 | writel(0x00000002, &mctl_com->mcr1_14); |
| 338 | writel(0x00000008, &mctl_com->mcr0_15); |
| 339 | writel(0x00000003, &mctl_com->mcr1_15); |
| 340 | writel(0x00010138, &mctl_com->bwcr); |
| 341 | |
| 342 | return 1 << (rows + columns + bus); |
| 343 | } |