blob: c557dbf4dcd609e22f879ef8b41e5b5c4d14909e [file] [log] [blame]
Tim Harvey5fe2ef02021-03-02 14:00:20 -08001// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2020 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/leds/common.h>
Marcel Ziswilerca453f22022-07-21 15:27:40 +02008#include <dt-bindings/phy/phy-imx8-pcie.h>
Tim Harvey5fe2ef02021-03-02 14:00:20 -08009
10/ {
11 aliases {
12 usb0 = &usbotg1;
13 usb1 = &usbotg2;
14 };
15
16 led-controller {
17 compatible = "gpio-leds";
18 pinctrl-names = "default";
19 pinctrl-0 = <&pinctrl_gpio_leds>;
20
21 led-0 {
22 function = LED_FUNCTION_STATUS;
23 color = <LED_COLOR_ID_GREEN>;
24 gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
25 default-state = "on";
26 linux,default-trigger = "heartbeat";
27 };
28
29 led-1 {
30 function = LED_FUNCTION_STATUS;
31 color = <LED_COLOR_ID_RED>;
32 gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
33 default-state = "off";
34 };
35 };
36
Marcel Ziswilerca453f22022-07-21 15:27:40 +020037 pcie0_refclk: pcie0-refclk {
38 compatible = "fixed-clock";
39 #clock-cells = <0>;
40 clock-frequency = <100000000>;
41 };
42
Tim Harvey5fe2ef02021-03-02 14:00:20 -080043 pps {
44 compatible = "pps-gpio";
45 pinctrl-names = "default";
46 pinctrl-0 = <&pinctrl_pps>;
47 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
48 status = "okay";
49 };
50
51 reg_usb_otg1_vbus: regulator-usb-otg1 {
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_reg_usb1_en>;
54 compatible = "regulator-fixed";
55 regulator-name = "usb_otg1_vbus";
Tim Harveyaefb0622021-07-27 15:19:34 -070056 gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
Tim Harvey5fe2ef02021-03-02 14:00:20 -080057 enable-active-high;
58 regulator-min-microvolt = <5000000>;
59 regulator-max-microvolt = <5000000>;
60 };
61};
62
63/* off-board header */
64&ecspi2 {
65 pinctrl-names = "default";
66 pinctrl-0 = <&pinctrl_spi2>;
Marcel Ziswilerca453f22022-07-21 15:27:40 +020067 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
Tim Harvey5fe2ef02021-03-02 14:00:20 -080068 status = "okay";
69};
70
Marcel Ziswilerca453f22022-07-21 15:27:40 +020071&gpio1 {
72 gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0",
73 "", "dio1", "", "", "", "", "", "",
74 "", "", "", "", "", "", "", "",
75 "", "", "", "", "", "", "", "";
76};
77
78&gpio4 {
79 gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#",
80 "", "", "", "", "", "", "", "",
81 "", "", "", "", "", "", "", "",
82 "", "", "", "", "", "", "", "";
83};
84
Tim Harvey5fe2ef02021-03-02 14:00:20 -080085&i2c2 {
86 clock-frequency = <400000>;
87 pinctrl-names = "default";
88 pinctrl-0 = <&pinctrl_i2c2>;
89 status = "okay";
90
91 accelerometer@19 {
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_accel>;
94 compatible = "st,lis2de12";
95 reg = <0x19>;
96 st,drdy-int-pin = <1>;
97 interrupt-parent = <&gpio4>;
98 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
99 interrupt-names = "INT1";
100 };
101};
102
103/* off-board header */
104&i2c3 {
105 clock-frequency = <400000>;
106 pinctrl-names = "default";
107 pinctrl-0 = <&pinctrl_i2c3>;
108 status = "okay";
109};
110
Marcel Ziswilerca453f22022-07-21 15:27:40 +0200111&pcie_phy {
112 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
113 fsl,clkreq-unsupported;
114 clocks = <&pcie0_refclk>;
115 clock-names = "ref";
116 status = "okay";
117};
118
119&pcie0 {
120 pinctrl-names = "default";
121 pinctrl-0 = <&pinctrl_pcie0>;
122 reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
123 clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
124 <&pcie0_refclk>;
125 clock-names = "pcie", "pcie_aux", "pcie_bus";
126 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
127 <&clk IMX8MM_CLK_PCIE1_CTRL>;
128 assigned-clock-rates = <10000000>, <250000000>;
129 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
130 <&clk IMX8MM_SYS_PLL2_250M>;
131 status = "okay";
132};
133
Tim Harvey5fe2ef02021-03-02 14:00:20 -0800134/* GPS */
135&uart1 {
136 pinctrl-names = "default";
137 pinctrl-0 = <&pinctrl_uart1>;
138 status = "okay";
139};
140
141/* off-board header */
142&uart3 {
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_uart3>;
145 status = "okay";
146};
147
148&usbotg1 {
149 dr_mode = "otg";
Marcel Ziswilerca453f22022-07-21 15:27:40 +0200150 over-current-active-low;
Tim Harvey5fe2ef02021-03-02 14:00:20 -0800151 vbus-supply = <&reg_usb_otg1_vbus>;
152 status = "okay";
153};
154
155&usbotg2 {
156 dr_mode = "host";
Marcel Ziswilerca453f22022-07-21 15:27:40 +0200157 disable-over-current;
Tim Harvey5fe2ef02021-03-02 14:00:20 -0800158 status = "okay";
159};
160
161&iomuxc {
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_hog>;
164
165 pinctrl_hog: hoggrp {
166 fsl,pins = <
167 MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */
168 MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */
169 MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */
170 MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */
171 MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */
172 MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000041 /* DIO2 */
173 MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000041 /* DIO2 */
174 >;
175 };
176
177 pinctrl_accel: accelgrp {
178 fsl,pins = <
179 MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159
180 >;
181 };
182
183 pinctrl_gpio_leds: gpioledgrp {
184 fsl,pins = <
185 MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19
186 MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19
187 >;
188 };
189
190 pinctrl_i2c3: i2c3grp {
191 fsl,pins = <
192 MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
193 MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
194 >;
195 };
196
Marcel Ziswilerca453f22022-07-21 15:27:40 +0200197 pinctrl_pcie0: pcie0grp {
198 fsl,pins = <
199 MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41
200 >;
201 };
202
Tim Harvey5fe2ef02021-03-02 14:00:20 -0800203 pinctrl_pps: ppsgrp {
204 fsl,pins = <
205 MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
206 >;
207 };
208
209 pinctrl_reg_usb1_en: regusb1grp {
210 fsl,pins = <
Tim Harveyaefb0622021-07-27 15:19:34 -0700211 MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x41
212 MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x141
Tim Harvey5fe2ef02021-03-02 14:00:20 -0800213 MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41
214 >;
215 };
216
217 pinctrl_spi2: spi2grp {
218 fsl,pins = <
219 MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
220 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
Marcel Ziswilerca453f22022-07-21 15:27:40 +0200221 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
Tim Harvey5fe2ef02021-03-02 14:00:20 -0800222 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
223 >;
224 };
225
226 pinctrl_uart1: uart1grp {
227 fsl,pins = <
228 MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
229 MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
230 >;
231 };
232
233 pinctrl_uart3: uart3grp {
234 fsl,pins = <
235 MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
236 MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
237 >;
238 };
239};