blob: 116728fc228991b2ad03814a9e1f984e887d9fe8 [file] [log] [blame]
Heiko Schocherb7a6d142015-06-15 14:56:41 +02001/*
2 * (C) Copyright 2013 Siemens Schweiz AG
3 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4 *
5 * Based on:
6 * U-Boot file:/include/configs/am335x_evm.h
7 *
8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12
13#ifndef __CONFIG_RASTABAN_H
14#define __CONFIG_RASTABAN_H
15
16#include "siemens-am33x-common.h"
17
Heiko Schocherb7a6d142015-06-15 14:56:41 +020018#define DDR_PLL_FREQ 303
19#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
20
21/* FWD Button = 27
22 * SRV Button = 87 */
23#define BOARD_DFU_BUTTON_GPIO 27
24#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
25/* In dfu mode keep led1 on */
26#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
27 "button_dfu0=27\0" \
28 "button_dfu1=87\0" \
29 "led0=3,0,1\0" \
30 "led1=4,0,0\0" \
31 "led2=5,0,1\0" \
32 "led3=62,0,1\0" \
33 "led4=60,0,1\0" \
34 "led5=63,0,1\0"
35
Heiko Schocherb7a6d142015-06-15 14:56:41 +020036 /* Physical Memory Map */
37#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
38
39/* I2C Configuration */
40#define CONFIG_SYS_I2C_SPEED 100000
41
42#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
43#define EEPROM_ADDR_DDR3 0x90
44#define EEPROM_ADDR_CHIP 0x120
45
Heiko Schocherb7a6d142015-06-15 14:56:41 +020046#undef CONFIG_MII
Heiko Schocherb7a6d142015-06-15 14:56:41 +020047#define CONFIG_PHY_SMSC
48
49#define CONFIG_FACTORYSET
50
Heiko Schocherb7a6d142015-06-15 14:56:41 +020051/* Define own nand partitions */
52#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
53#define CONFIG_ENV_SIZE_REDUND 0x2000
54#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
55
Heiko Schocherb7a6d142015-06-15 14:56:41 +020056#ifndef CONFIG_SPL_BUILD
57
58/* Default env settings */
59#define CONFIG_EXTRA_ENV_SETTINGS \
60 "hostname=rastaban\0" \
Heiko Schochercbec11a2016-06-07 08:55:45 +020061 "ubi_off=2048\0"\
Heiko Schocherb7a6d142015-06-15 14:56:41 +020062 "nand_img_size=0x400000\0" \
63 "optargs=\0" \
64 "preboot=draco_led 0\0" \
65 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
66 CONFIG_ENV_SETTINGS_V2 \
67 CONFIG_ENV_SETTINGS_NAND_V2
68
69#ifndef CONFIG_RESTORE_FLASH
70/* set to negative value for no autoboot */
Heiko Schocherb7a6d142015-06-15 14:56:41 +020071
72#define CONFIG_BOOTCOMMAND \
73"if dfubutton; then " \
74 "run dfu_start; " \
75 "reset; " \
76"fi;" \
77"run nand_boot;" \
78"run nand_boot_backup;" \
79"reset;"
80
Heiko Schocherb7a6d142015-06-15 14:56:41 +020081#else
Heiko Schocherb7a6d142015-06-15 14:56:41 +020082
83#define CONFIG_BOOTCOMMAND \
84 "setenv autoload no; " \
85 "dhcp; " \
86 "if tftp 80000000 debrick.scr; then " \
87 "source 80000000; " \
88 "fi"
89#endif
90#endif /* CONFIG_SPL_BUILD */
91#endif /* ! __CONFIG_RASTABAN_H */