Gregory CLEMENT | dc253e2 | 2018-12-14 16:16:50 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (c) 2018 Microsemi Corporation |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | #include "mscc,luton.dtsi" |
| 8 | |
| 9 | / { |
| 10 | model = "Luton10 PCB091 Reference Board"; |
| 11 | compatible = "mscc,luton-pcb091", "mscc,luton"; |
| 12 | |
| 13 | aliases { |
| 14 | serial0 = &uart0; |
| 15 | spi0 = &spi0; |
| 16 | }; |
| 17 | |
| 18 | chosen { |
| 19 | stdout-path = "serial0:115200n8"; |
| 20 | }; |
Lars Povlsen | 2a6db6c | 2019-01-02 09:52:23 +0100 | [diff] [blame] | 21 | |
| 22 | gpio-leds { |
| 23 | compatible = "gpio-leds"; |
| 24 | |
| 25 | top_dimmer { |
| 26 | label = "pcb091:top:dimmer"; |
| 27 | gpios = <&gpio 29 GPIO_ACTIVE_LOW>; |
| 28 | default-state = "on"; |
| 29 | }; |
| 30 | |
| 31 | status_green { |
| 32 | label = "pcb091:green:status"; |
| 33 | gpios = <&sgpio 26 GPIO_ACTIVE_HIGH>; /* p26.0 */ |
| 34 | default-state = "on"; |
| 35 | }; |
| 36 | |
| 37 | status_red { |
| 38 | label = "pcb091:red:status"; |
| 39 | gpios = <&sgpio 58 GPIO_ACTIVE_HIGH>; /* p26.1 */ |
| 40 | default-state = "off"; |
| 41 | }; |
| 42 | }; |
| 43 | }; |
| 44 | |
| 45 | &sgpio { |
| 46 | status = "okay"; |
| 47 | mscc,sgpio-ports = <0xFFF000FF>; |
Gregory CLEMENT | dc253e2 | 2018-12-14 16:16:50 +0100 | [diff] [blame] | 48 | }; |
| 49 | |
| 50 | &uart0 { |
| 51 | status = "okay"; |
| 52 | }; |
| 53 | |
| 54 | &spi0 { |
| 55 | status = "okay"; |
| 56 | spi-flash@0 { |
| 57 | compatible = "spi-flash"; |
| 58 | spi-max-frequency = <18000000>; /* input clock */ |
| 59 | reg = <0>; /* CS0 */ |
| 60 | spi-cs-high; |
| 61 | }; |
| 62 | }; |
| 63 | |
Horatiu Vultur | aecde64 | 2019-01-31 15:30:38 +0100 | [diff] [blame] | 64 | &mdio0 { |
| 65 | status = "okay"; |
| 66 | }; |
| 67 | |
| 68 | &port0 { |
| 69 | phy-handle = <&phy0>; |
| 70 | }; |
| 71 | |
| 72 | &port1 { |
| 73 | phy-handle = <&phy1>; |
| 74 | }; |
| 75 | |
| 76 | &port2 { |
| 77 | phy-handle = <&phy2>; |
| 78 | }; |
| 79 | |
| 80 | &port3 { |
| 81 | phy-handle = <&phy3>; |
| 82 | }; |
| 83 | |
| 84 | &port4 { |
| 85 | phy-handle = <&phy4>; |
| 86 | }; |
| 87 | |
| 88 | &port5 { |
| 89 | phy-handle = <&phy5>; |
| 90 | }; |
| 91 | |
| 92 | &port6 { |
| 93 | phy-handle = <&phy6>; |
| 94 | }; |
| 95 | |
| 96 | &port7 { |
| 97 | phy-handle = <&phy7>; |
| 98 | }; |
| 99 | |
| 100 | &port8 { |
| 101 | phy-handle = <&phy8>; |
| 102 | }; |
| 103 | |
| 104 | &port9 { |
| 105 | phy-handle = <&phy9>; |
| 106 | }; |
| 107 | |
| 108 | &port10 { |
| 109 | phy-handle = <&phy10>; |
| 110 | }; |
| 111 | |
| 112 | &port11 { |
| 113 | phy-handle = <&phy11>; |
| 114 | }; |