dts/upstream/Bindings/pinctrl/renesas,rza2-pinctrl.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/renesas,rza2-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Renesas RZ/A2 combined Pin and GPIO controller

maintainers:
  - Chris Brandt <chris.brandt@renesas.com>
  - Geert Uytterhoeven <geert+renesas@glider.be>

description:
  The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO
  controller.
  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
  Each port features up to 8 pins, each of them configurable for GPIO function
  (port mode) or in alternate function mode.
  Up to 8 different alternate function modes exist for each single pin.

properties:
  compatible:
    const: renesas,r7s9210-pinctrl # RZ/A2M

  reg:
    maxItems: 1

  gpio-controller: true

  '#gpio-cells':
    const: 2
    description:
      The first cell contains the global GPIO port index, constructed using the
      RZA2_PIN() helper macro in r7s9210-pinctrl.h.
      E.g. "RZA2_PIN(PORT6, 0)" for P6_0.

  gpio-ranges:
    maxItems: 1

additionalProperties:
  type: object

  allOf:
    - $ref: pincfg-node.yaml#
    - $ref: pinmux-node.yaml#

  description:
    The child nodes of the pin controller designate pins to be used for
    specific peripheral functions or as GPIO.

    A pin multiplexing sub-node describes how to configure a set of
    (or a single) pin in some desired alternate function mode.
    The values for the pinmux properties are a combination of port name,
    pin number and the desired function index. Use the RZA2_PINMUX macro
    located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
    define these.
    For assigning GPIO pins, use the macro RZA2_PIN also in
    to express the desired port pin.

  properties:
    pinmux:
      description:
        Values are constructed from GPIO port number, pin number, and
        alternate function configuration number using the RZA2_PINMUX()
        helper macro in r7s9210-pinctrl.h.

  required:
    - pinmux

  additionalProperties: false

allOf:
  - $ref: pinctrl.yaml#

required:
  - compatible
  - reg
  - gpio-controller
  - '#gpio-cells'
  - gpio-ranges

examples:
  - |
    #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
    pinctrl: pinctrl@fcffe000 {
            compatible = "renesas,r7s9210-pinctrl";
            reg = <0xfcffe000 0x1000>;

            gpio-controller;
            #gpio-cells = <2>;
            gpio-ranges = <&pinctrl 0 0 176>;

            /* Serial Console */
            scif4_pins: serial4 {
                    pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
                             <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
            };
    };