blob: 3932e766553adc7405aef8875476777cf64f01e9 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -05001Texas Instruments AM437x CAMERA (VPFE)
2--------------------------------------
3
4The Video Processing Front End (VPFE) is a key component for image capture
5applications. The capture module provides the system interface and the
6processing capability to connect RAW image-sensor modules and video decoders
7to the AM437x device.
8
9Required properties:
10- compatible: must be "ti,am437x-vpfe"
11- reg: physical base address and length of the registers set for the device;
12- interrupts: should contain IRQ line for the VPFE;
13- ti,am437x-vpfe-interface: can be one of the following,
14 0 - Raw Bayer Interface.
15 1 - 8 Bit BT656 Interface.
16 2 - 10 Bit BT656 Interface.
17 3 - YCbCr 8 Bit Interface.
18 4 - YCbCr 16 Bit Interface.
19
20VPFE supports a single port node with parallel bus. It should contain one
21'port' child node with child 'endpoint' node. Please refer to the bindings
22defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
23
24Example:
25 vpfe: vpfe@f0034000 {
26 compatible = "ti,am437x-vpfe";
27 reg = <0x48328000 0x2000>;
28 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
29
30 pinctrl-names = "default", "sleep";
31 pinctrl-0 = <&vpfe_pins_default>;
32 pinctrl-1 = <&vpfe_pins_sleep>;
33
34 port {
35 #address-cells = <1>;
36 #size-cells = <0>;
37
38 vpfe0_ep: endpoint {
39 remote-endpoint = <&ov2659_1>;
40 ti,am437x-vpfe-interface = <0>;
41 bus-width = <8>;
42 hsync-active = <0>;
43 vsync-active = <0>;
44 };
45 };
46 };
47
48 i2c1: i2c@4802a000 {
49
50 ov2659@30 {
51 compatible = "ti,ov2659";
52 reg = <0x30>;
53
54 port {
55 ov2659_1: endpoint {
56 remote-endpoint = <&vpfe0_ep>;
57 bus-width = <8>;
58 mclk-frequency = <12000000>;
59 };
60 };
61 };