arch/arm/cpu/armv7/am33xx/emif4.c

/*
 * emif4.c
 *
 * AM33XX emif4 configuration file
 *
 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/hardware.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/emif.h>

DECLARE_GLOBAL_DATA_PTR;

struct ddr_regs *ddrregs = (struct ddr_regs *)DDR_PHY_BASE_ADDR;
struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR;
struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;

int dram_init(void)
{
	/* dram_init must store complete ramsize in gd->ram_size */
	gd->ram_size = get_ram_size(
			(void *)CONFIG_SYS_SDRAM_BASE,
			CONFIG_MAX_RAM_BANK_SIZE);
	return 0;
}

void dram_init_banksize(void)
{
	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
	gd->bd->bi_dram[0].size = gd->ram_size;
}


#ifdef CONFIG_SPL_BUILD
static const struct ddr_data ddr2_data = {
	.datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20)
				|(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)),
	.datardsratio1 = DDR2_RD_DQS>>2,
	.datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20)
				|(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)),
	.datawdsratio1 = DDR2_WR_DQS>>2,
	.datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20)
				|(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)),
	.datawiratio1 = DDR2_PHY_WRLVL>>2,
	.datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20)
				|(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)),
	.datagiratio1 = DDR2_PHY_GATELVL>>2,
	.datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20)
				|(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)),
	.datafwsratio1 = DDR2_PHY_FIFO_WE>>2,
	.datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
				|(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)),
	.datawrsratio1 = DDR2_PHY_WR_DATA>>2,
	.datadldiff0 = PHY_DLL_LOCK_DIFF,
};

static const struct cmd_control ddr2_cmd_ctrl_data = {
	.cmd0csratio = DDR2_RATIO,
	.cmd0csforce = CMD_FORCE,
	.cmd0csdelay = CMD_DELAY,
	.cmd0dldiff = DDR2_DLL_LOCK_DIFF,
	.cmd0iclkout = DDR2_INVERT_CLKOUT,

	.cmd1csratio = DDR2_RATIO,
	.cmd1csforce = CMD_FORCE,
	.cmd1csdelay = CMD_DELAY,
	.cmd1dldiff = DDR2_DLL_LOCK_DIFF,
	.cmd1iclkout = DDR2_INVERT_CLKOUT,

	.cmd2csratio = DDR2_RATIO,
	.cmd2csforce = CMD_FORCE,
	.cmd2csdelay = CMD_DELAY,
	.cmd2dldiff = DDR2_DLL_LOCK_DIFF,
	.cmd2iclkout = DDR2_INVERT_CLKOUT,
};

static void config_vtp(void)
{
	writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE,
			&vtpreg->vtp0ctrlreg);
	writel(readl(&vtpreg->vtp0ctrlreg) & (~VTP_CTRL_START_EN),
			&vtpreg->vtp0ctrlreg);
	writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_START_EN,
			&vtpreg->vtp0ctrlreg);

	/* Poll for READY */
	while ((readl(&vtpreg->vtp0ctrlreg) & VTP_CTRL_READY) !=
			VTP_CTRL_READY)
		;
}

static void config_emif_ddr2(void)
{
	int ret;
	struct sdram_config cfg;
	struct sdram_timing tmg;
	struct ddr_phy_control phyc;

	/* Program EMIF0 CFG Registers */
	phyc.reg = DDR2_EMIF_READ_LATENCY;
	phyc.reg_sh = DDR2_EMIF_READ_LATENCY;
	phyc.reg2 = DDR2_EMIF_READ_LATENCY;

	tmg.time1 = DDR2_EMIF_TIM1;
	tmg.time1_sh = DDR2_EMIF_TIM1;
	tmg.time2 = DDR2_EMIF_TIM2;
	tmg.time2_sh = DDR2_EMIF_TIM2;
	tmg.time3 = DDR2_EMIF_TIM3;
	tmg.time3_sh = DDR2_EMIF_TIM3;

	cfg.sdrcr = DDR2_EMIF_SDCFG;
	cfg.sdrcr2 = DDR2_EMIF_SDCFG;
	cfg.refresh = DDR2_EMIF_SDREF;
	cfg.refresh_sh = DDR2_EMIF_SDREF;

	/* Program EMIF instance */
	ret = config_ddr_phy(&phyc);
	if (ret < 0)
		printf("Couldn't configure phyc\n");


	ret = set_sdram_timings(&tmg);
	if (ret < 0)
		printf("Couldn't configure timings\n");

	ret = config_sdram(&cfg);
	if (ret < 0)
		printf("Couldn't configure SDRAM\n");
}

void config_ddr(short ddr_type)
{
	struct ddr_ioctrl ioctrl;

	enable_emif_clocks();

	if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) {
		ddr_pll_config(266);
		config_vtp();

		config_cmd_ctrl(&ddr2_cmd_ctrl_data);

		config_ddr_data(0, &ddr2_data);
		config_ddr_data(1, &ddr2_data);

		writel(DDR2_PHY_RANK0_DELAY, &ddrregs->dt0rdelays0);
		writel(DDR2_PHY_RANK0_DELAY, &ddrregs->dt1rdelays0);

		ioctrl.cmd1ctl = DDR2_IOCTRL_VALUE;
		ioctrl.cmd2ctl = DDR2_IOCTRL_VALUE;
		ioctrl.cmd3ctl = DDR2_IOCTRL_VALUE;
		ioctrl.data1ctl = DDR2_IOCTRL_VALUE;
		ioctrl.data2ctl = DDR2_IOCTRL_VALUE;

		config_io_ctrl(&ioctrl);

		writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff,
				&ddrctrl->ddrioctrl);
		writel(readl(&ddrctrl->ddrckectrl) | 0x00000001,
				&ddrctrl->ddrckectrl);

		config_emif_ddr2();
	}
}
#endif