am33xx: Pass to config_ddr the type of memory that is connected
We need to pass in the type of memory that is connected to the board.
The only reliable way to do this is to know what type of board we are
running on (which later will be knowable in s_init()). For now, pass in
the value of DDR2.
Signed-off-by: Tom Rini <trini@ti.com>
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 26c6a66..9b1a80c 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -22,6 +22,7 @@
#include <asm/arch/hardware.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
+#include <asm/emif.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -29,7 +30,6 @@
struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR;
struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
-
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
@@ -143,33 +143,37 @@
printf("Couldn't configure SDRAM\n");
}
-void config_ddr(void)
+void config_ddr(short ddr_type)
{
struct ddr_ioctrl ioctrl;
enable_emif_clocks();
- config_vtp();
+ if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) {
+ config_vtp();
- config_cmd_ctrl(&ddr2_cmd_ctrl_data);
+ config_cmd_ctrl(&ddr2_cmd_ctrl_data);
- config_ddr_data(0, &ddr2_data);
- config_ddr_data(1, &ddr2_data);
+ config_ddr_data(0, &ddr2_data);
+ config_ddr_data(1, &ddr2_data);
- writel(PHY_RANK0_DELAY, &ddrregs->dt0rdelays0);
- writel(PHY_RANK0_DELAY, &ddrregs->dt1rdelays0);
+ writel(PHY_RANK0_DELAY, &ddrregs->dt0rdelays0);
+ writel(PHY_RANK0_DELAY, &ddrregs->dt1rdelays0);
- ioctrl.cmd1ctl = DDR_IOCTRL_VALUE;
- ioctrl.cmd2ctl = DDR_IOCTRL_VALUE;
- ioctrl.cmd3ctl = DDR_IOCTRL_VALUE;
- ioctrl.data1ctl = DDR_IOCTRL_VALUE;
- ioctrl.data2ctl = DDR_IOCTRL_VALUE;
+ ioctrl.cmd1ctl = DDR_IOCTRL_VALUE;
+ ioctrl.cmd2ctl = DDR_IOCTRL_VALUE;
+ ioctrl.cmd3ctl = DDR_IOCTRL_VALUE;
+ ioctrl.data1ctl = DDR_IOCTRL_VALUE;
+ ioctrl.data2ctl = DDR_IOCTRL_VALUE;
- config_io_ctrl(&ioctrl);
+ config_io_ctrl(&ioctrl);
- writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff, &ddrctrl->ddrioctrl);
- writel(readl(&ddrctrl->ddrckectrl) | 0x00000001, &ddrctrl->ddrckectrl);
+ writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff,
+ &ddrctrl->ddrioctrl);
+ writel(readl(&ddrctrl->ddrckectrl) | 0x00000001,
+ &ddrctrl->ddrckectrl);
- config_emif_ddr2();
+ config_emif_ddr2();
+ }
}
#endif