blob: b03866347b0032feed34baad8eb22e3a5453060f [file] [log] [blame]
eric.gao@rock-chips.com735ddea2017-04-17 22:24:23 +08001#
2# Video drivers selection for rockchip soc. These configs only impact the
3# compile process. You can surely check all the options. In this case, all the
4# display driver will be compiled, but which drivers finally will be used is
5# decided by device tree configuration. What's more, enable needed power for
6# display by configure the device tree, and the vop driver will do the rest.
7#
8# Author: Eric Gao <eric.gao@rock-chips.com>
9#
10
11menuconfig VIDEO_ROCKCHIP
12 bool "Enable Rockchip Video Support"
Simon Glass52cb5042022-10-18 07:46:31 -060013 depends on VIDEO
eric.gao@rock-chips.com735ddea2017-04-17 22:24:23 +080014 help
Philipp Tomsichf1fe2162017-05-31 17:59:28 +020015 Rockchip SoCs provide video output capabilities for High-Definition
16 Multimedia Interface (HDMI), Low-voltage Differential Signalling
17 (LVDS), embedded DisplayPort (eDP) and Display Serial Interface (DSI).
18
19 This driver supports the on-chip video output device, and targets the
20 Rockchip RK3288 and RK3399.
eric.gao@rock-chips.com735ddea2017-04-17 22:24:23 +080021
Philipp Tomsichd3a58262017-05-31 17:59:29 +020022config VIDEO_ROCKCHIP_MAX_XRES
23 int "Maximum horizontal resolution (for memory allocation purposes)"
24 depends on VIDEO_ROCKCHIP
Jagan Teki09558272020-10-24 01:27:24 +053025 default 3840 if DISPLAY_ROCKCHIP_HDMI
Philipp Tomsichd3a58262017-05-31 17:59:29 +020026 default 1920
27 help
28 The maximum horizontal resolution to support for the framebuffer.
29 This configuration is used for reserving/allocating memory for the
30 framebuffer during device-model binding/probing.
31
32config VIDEO_ROCKCHIP_MAX_YRES
33 int "Maximum vertical resolution (for memory allocation purposes)"
34 depends on VIDEO_ROCKCHIP
Jagan Teki09558272020-10-24 01:27:24 +053035 default 2160 if DISPLAY_ROCKCHIP_HDMI
Philipp Tomsichd3a58262017-05-31 17:59:29 +020036 default 1080
37 help
38 The maximum vertical resolution to support for the framebuffer.
39 This configuration is used for reserving/allocating memory for the
40 framebuffer during device-model binding/probing.
41
eric.gao@rock-chips.com735ddea2017-04-17 22:24:23 +080042if VIDEO_ROCKCHIP
43
44config DISPLAY_ROCKCHIP_EDP
45 bool "EDP Port"
46 depends on VIDEO_ROCKCHIP
47 help
48 This enables Embedded DisplayPort(EDP) display support.
49
50config DISPLAY_ROCKCHIP_LVDS
51 bool "LVDS Port"
52 depends on VIDEO_ROCKCHIP
53 help
54 This enables Low-voltage Differential Signaling(LVDS) display
55 support.
56
57config DISPLAY_ROCKCHIP_HDMI
58 bool "HDMI port"
Philipp Tomsich3a53b3e2017-05-05 21:48:26 +020059 select VIDEO_DW_HDMI
eric.gao@rock-chips.com735ddea2017-04-17 22:24:23 +080060 depends on VIDEO_ROCKCHIP
61 help
62 This enables High-Definition Multimedia Interface display support.
63
Eric Gao4789bc12017-05-02 18:23:50 +080064config DISPLAY_ROCKCHIP_MIPI
65 bool "MIPI Port"
66 depends on VIDEO_ROCKCHIP
67 help
68 This enables Mobile Industry Processor Interface(MIPI) display
69 support. The mipi controller and dphy on rk3288& rk3399 support
Chris Packhamae8ff672019-01-13 22:13:27 +130070 16,18, 24 bits per pixel with up to 2k resolution ratio.
eric.gao@rock-chips.com735ddea2017-04-17 22:24:23 +080071
Eric Gao4789bc12017-05-02 18:23:50 +080072endif