drivers/i2c/designware_i2c_pci.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2009
 * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
 * Copyright 2019 Google Inc
 */

#include <common.h>
#include <dm.h>
#include <spl.h>
#include "designware_i2c.h"

/* BayTrail HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg byt_config = {
	.ss_hcnt = 0x200,
	.fs_hcnt = 0x55,
	.ss_lcnt = 0x200,
	.fs_lcnt = 0x99,
	.sda_hold = 0x6,
};

static int designware_i2c_pci_ofdata_to_platdata(struct udevice *dev)
{
	struct dw_i2c *priv = dev_get_priv(dev);

	if (spl_phase() < PHASE_SPL) {
		u32 base;
		int ret;

		ret = dev_read_u32(dev, "early-regs", &base);
		if (ret)
			return log_msg_ret("early-regs", ret);

		/* Set i2c base address */
		dm_pci_write_config32(dev, PCI_BASE_ADDRESS_0, base);

		/* Enable memory access and bus master */
		dm_pci_write_config32(dev, PCI_COMMAND, PCI_COMMAND_MEMORY |
				      PCI_COMMAND_MASTER);
	}

	if (spl_phase() < PHASE_BOARD_F) {
		/* Handle early, fixed mapping into a different address space */
		priv->regs = (struct i2c_regs *)dm_pci_read_bar32(dev, 0);
	} else {
		priv->regs = (struct i2c_regs *)
			dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
	}
	if (!priv->regs)
		return -EINVAL;

	/* Save base address from PCI BAR */
	if (IS_ENABLED(CONFIG_INTEL_BAYTRAIL))
		/* Use BayTrail specific timing values */
		priv->scl_sda_cfg = &byt_config;

	return 0;
}

static int designware_i2c_pci_probe(struct udevice *dev)
{
	return designware_i2c_probe(dev);
}

static int designware_i2c_pci_bind(struct udevice *dev)
{
	char name[20];

	/*
	 * Create a unique device name for PCI type devices
	 * ToDo:
	 * Setting req_seq in the driver is probably not recommended.
	 * But without a DT alias the number is not configured. And
	 * using this driver is impossible for PCIe I2C devices.
	 * This can be removed, once a better (correct) way for this
	 * is found and implemented.
	 *
	 * TODO(sjg@chromium.org): Perhaps if uclasses had platdata this would
	 * be possible. We cannot use static data in drivers since they may be
	 * used in SPL or before relocation.
	 */
	dev->req_seq = gd->arch.dw_i2c_num_cards++;
	sprintf(name, "i2c_designware#%u", dev->req_seq);
	device_set_name(dev, name);

	return 0;
}

static const struct udevice_id designware_i2c_pci_ids[] = {
	{ .compatible = "snps,designware-i2c-pci" },
	{ }
};

U_BOOT_DRIVER(i2c_designware_pci) = {
	.name	= "i2c_designware_pci",
	.id	= UCLASS_I2C,
	.of_match = designware_i2c_pci_ids,
	.bind	= designware_i2c_pci_bind,
	.ofdata_to_platdata	= designware_i2c_pci_ofdata_to_platdata,
	.probe	= designware_i2c_pci_probe,
	.priv_auto_alloc_size = sizeof(struct dw_i2c),
	.remove = designware_i2c_remove,
	.flags = DM_FLAG_OS_PREPARE,
	.ops	= &designware_i2c_ops,
};

static struct pci_device_id designware_pci_supported[] = {
	/* Intel BayTrail has 7 I2C controller located on the PCI bus */
	{ PCI_VDEVICE(INTEL, 0x0f41) },
	{ PCI_VDEVICE(INTEL, 0x0f42) },
	{ PCI_VDEVICE(INTEL, 0x0f43) },
	{ PCI_VDEVICE(INTEL, 0x0f44) },
	{ PCI_VDEVICE(INTEL, 0x0f45) },
	{ PCI_VDEVICE(INTEL, 0x0f46) },
	{ PCI_VDEVICE(INTEL, 0x0f47) },
	{},
};

U_BOOT_PCI_DEVICE(i2c_designware_pci, designware_pci_supported);