| Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | |
| 3 | /dts-v1/; |
| 4 | |
| 5 | #include "msm8916-samsung-fortuna-common.dtsi" |
| 6 | |
| 7 | / { |
| 8 | model = "Samsung Galaxy Grand Prime (SM-G530W)"; |
| 9 | compatible = "samsung,gprimeltecan", "qcom,msm8916"; |
| 10 | chassis-type = "handset"; |
| 11 | |
| 12 | reserved-memory { |
| 13 | /* Firmware for gprimeltecan needs more space */ |
| 14 | /delete-node/ tz-apps@85a00000; |
| 15 | |
| 16 | /* Additional memory used by Samsung firmware modifications */ |
| 17 | tz-apps@85500000 { |
| 18 | reg = <0x0 0x85500000 0x0 0xb00000>; |
| 19 | no-map; |
| 20 | }; |
| 21 | }; |
| 22 | }; |
| 23 | |
| Tom Rini | 6b642ac | 2024-10-01 12:20:28 -0600 | [diff] [blame] | 24 | &battery { |
| 25 | charge-term-current-microamp = <200000>; |
| 26 | constant-charge-current-max-microamp = <1000000>; |
| 27 | constant-charge-voltage-max-microvolt = <4350000>; |
| 28 | }; |
| 29 | |
| 30 | &bosch_accel { |
| 31 | status = "okay"; |
| 32 | }; |
| 33 | |
| 34 | &bosch_magn { |
| 35 | status = "okay"; |
| 36 | }; |
| 37 | |
| 38 | &blsp_i2c6 { |
| 39 | /* pmic@34 is on i2c_nfc instead */ |
| 40 | /delete-node/ pmic@34; |
| 41 | |
| 42 | nfc@27 { |
| 43 | compatible = "samsung,s3fwrn5-i2c"; |
| 44 | reg = <0x27>; |
| 45 | |
| 46 | interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>; |
| 47 | |
| 48 | en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; |
| 49 | wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; |
| 50 | |
| 51 | clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>; |
| 52 | |
| 53 | pinctrl-0 = <&nfc_default>, <&nfc_clk_req>; |
| 54 | pinctrl-names = "default"; |
| 55 | }; |
| 56 | }; |
| 57 | |
| 58 | &i2c_nfc { |
| 59 | /* nfc@27 is on &blsp_i2c6 */ |
| 60 | |
| 61 | pmic@34 { |
| 62 | compatible = "richtek,rt5033"; |
| 63 | reg = <0x34>; |
| 64 | |
| 65 | interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; |
| 66 | |
| 67 | pinctrl-0 = <&pmic_int_default>; |
| 68 | pinctrl-names = "default"; |
| 69 | |
| 70 | regulators { |
| 71 | rt5033_reg_safe_ldo: SAFE_LDO { |
| 72 | regulator-min-microvolt = <4900000>; |
| 73 | regulator-max-microvolt = <4900000>; |
| 74 | regulator-always-on; |
| 75 | }; |
| 76 | |
| 77 | /* |
| 78 | * Needed for camera, but not used yet. |
| 79 | * Define empty nodes to allow disabling the unused |
| 80 | * regulators. |
| 81 | */ |
| 82 | LDO {}; |
| 83 | BUCK {}; |
| 84 | }; |
| 85 | |
| 86 | charger: charger { |
| 87 | compatible = "richtek,rt5033-charger"; |
| 88 | monitored-battery = <&battery>; |
| 89 | richtek,usb-connector = <&usb_con>; |
| 90 | }; |
| 91 | }; |
| 92 | }; |
| 93 | |
| Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 94 | &mpss_mem { |
| 95 | /* Firmware for gprimeltecan needs more space */ |
| 96 | reg = <0x0 0x86800000 0x0 0x5400000>; |
| 97 | }; |